Photodegradation of diphenylarsinic acid by UV-C light: Implication for its remediation

UV Stimulated Manganese Dioxide for the Persulfate Catalytic Degradation of Bisphenol A

One of the most commonly produced industrial chemicals worldwide, bisphenol A (BPA), is used as a precursor in plastics, resins, paints, and many other materials. It has been proved that BPA can cause long-term adverse effects on ecosystems and human health due to its toxicity as an endocrine disruptor. In this study, we developed an integrated MnO2/UV/persulfate (PS) process for use in BPA photocatalytic degradation from water and examined the reaction mechanisms, degradation pathways, and toxicity reduction. Comparative tests using MnO2, PS, UV, UV/MnO2, MnO2/PS, and UV/PS processes were conducted under the same conditions to investigate the mechanism of BPA catalytic degradation by the proposed MnO2/UV/PS process. The best performance was observed in the MnO2/UV/PS process in which BPA was completely removed in 30 min with a reduction rate of over 90% for total organic carbon after 2 h. This process also showed a stable removal efficiency with a large variation of pH levels (3.6 to 10.0). Kinetic analysis suggested that 1O2 and SO4•− played more critical roles than •OH for BPA degradation. Infrared spectra showed that UV irradiation could stimulate the generation of –OH groups on the MnO2 photocatalyst surface, facilitating the PS catalytic degradation of BPA in this process. The degradation pathways were further proposed in five steps, and thirteen intermediates were identified by gas chromatography-mass spectrometry. The acute toxicity was analyzed during the treatment, showing a slight increase (by 3.3%) in the first 30 min and then a decrease by four-fold over 2 h. These findings help elucidate the mechanism and pathways of BPA degradation and provide an effective PS catalytic strategy.

Conventional and emerging technologies for removal of antibiotics from wastewater

Antibiotics and pharmaceuticals related products are used to enhance public health and quality of life. The wastewater that is produced from pharmaceutical industries still contains noticeable amount of antibiotics, and this has remained one of the major environmental problems facing public health. The conventional wastewater remediation approach employed by the pharmaceutical industries for the antibiotics wastewater removal is unable to remove the antibiotics completely. Besides, municipal and livestock wastewater also contain unmetabolized antibiotics released by human and animal, respectively. The antibiotic found in wastewater leads to antibiotic resistance challenges, also emergence of superbugs. Currently, numerous technological approaches have been developed to remove antibiotics from the wastewater. Therefore, it was imperative to critically review the weakness and strength of these current advanced technological approaches in use. Besides, the conventional methods for removal of antibiotics such as Klavaroti et al., Homem and Santos also discussed. Although, membrane treatment is discovered as the ultimate choice of approach, to completely remove the antibiotics, while the filtered antibiotics are still retained on the membrane. This study found, hybrid processes to be the best solution antibiotics removal from wastewater. Nevertheless, real-time monitoring system is also recommended to ascertain that, wastewater is cleared of antibiotics.

Effect of Co(II) dopant on the removal of Methylene Blue by a dense copper terephthalate

In this research, for the first time, a series of Co(II) doped copper terephthalate (CoX-CuBDC, where X is doping percentage) were successfully synthesized via solvothermal method and were tested for dye removal application. The physical properties of CoX-CuBDC were studied by several techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy-dispersive spectroscopy (EDS), thermogravimetric analysis (TGA) and Brunauer-Emmett-Teller (BET) surface area analysis. The incorporation of Co(II) dopant leads to isomorphic substitution of Cu(II) in the CuBDC framework with the maximum doping percentage of 22. Doping and parent MOFs which are non-porous were used for removal of Methylene Blue (MB) from aqueous solution. Adsorption capacity of Co22-CuBDC and CuBDC are 52 and 58 mg/g, respectively, both of which are higher than the adsorption capacity recorded from several high porosity MOFs. Adsorption kinetic studies indicate that adsorption process follows pseudo-second order model while the adsorption mechanism is dominated by electrostatic attraction. Overall, even though these materials show non-porous characteristic, it can be used effectively in wastewater treatment application.

Aromatic organoarsenic compounds (AOCs) occurrence and remediation methods

Many researchers at home and abroad have made a body of researches and have gained great achievements on the environmental occurrence, fate, and toxicity of inorganic arsenic. But there is less research on the use of aromatic organoarsenic compounds (AOCs), which are common feed additives for livestock in the poultry industry. In this review, we outline the current state of knowledge acquired on the occurrence and remediation of AOCs, respectively. We also identify knowledge gaps and research needs, including the elucidation of the environmental fate of AOCs, metabolic pathway, the impact of metabolic modification on toxicity, and advanced analytical or repaired methods that allows for monitoring, identification or removal of the degradation products.

Molecular insight of arsenic-induced carcinogenesis and its prevention

Population of India and Bangladesh and many other parts of the world are badly exposed to arsenic through drinking water. Due to non-availability of safe drinking water, they are dependent on arsenic-contaminated water. Generally, poverty level is high in those areas with lack of proper nutrition. Arsenic is considered to be an environmental contaminant and widely distributed in the environment due to its natural existence and anthropogenic applications. Contamination of arsenic in both human and animal could occur through air, soil, and other sources. Arsenic exposure mainly occurs in food materials through drinking water with high levels of arsenic in it. High levels of arsenic in groundwater have been found to be associated with various health-related problems including arsenicosis, skin lesions, cardiovascular diseases, reproductive problems, psychological, neurological, immunotoxic, and carcinogenesis. The mechanism of arsenic toxicity consists in its transformation in metaarsenite, which acylates protein sulfhydryl groups, affect on mitochondria by inhibiting succinic dehydrogenase activity and can uncouple oxidative phosphorylation with production of active oxygen species by tissues. A variety of dietary antioxidant supplements are useful to protect the carcinogenetic effects of arsenic. They play crucial role for counteracting oxidative damage and protect carcinogenesis by chelating with heavy metal moiety. Phytochemicals and chelating agents will be beneficial for combating heavy metal-induced carcinogenesis through its biopharmaceutical properties.