Electrolysis assisted persulfate with annular iron sheet as anode for the enhanced degradation of 2, 4-dinitrophenol in aqueous solution

Enhancing municipal solid waste leachate treatment efficiency: AI-based prediction of electrocoagulation/flocculation recovery using iron electrodes

This study addresses a gap in municipal leachate (MUPL) treatment by introducing a pioneering application of artificial intelligence (AI) in the electrocoagulation/electroflocculation (EC/EF) process utilizing iron electrodes. The overarching aim is to demonstrate the efficacy of AI, particularly a multi-layer perceptron (MLP)-based feed-forward artificial neural network (ANN) incorporating the Levenberg-Marquardt (LMb) algorithm, in predicting and optimizing EC/EF outcomes for turbidity (TDY) removal. The research methodology involved experimentation and robust ANN data modeling. The significance of this work emerges from the successful integration of AI, showcasing its potential in advancing wastewater, demonstrated through a strong positive correlation (0.994) between the ANN model predictions and experimental outcomes. The study achieves a remarkable 99.4% TDY removal at an electrolysis time of 10 min and contributes valuable insights into the critical parameters influencing the EC/EF process. Results from the ANN modeling exhibit high predictive accuracy, supported by elevated R-squared values and minimal mean square error. Statistical analyses underscore the significance of key process parameters, highlighting the influential roles of current intensity and settling time. The study emphasized the favourable impact of maintaining an acidic pH range, as it reduced electrostatic repulsion between particles, facilitating pollutant agglomeration, and identified electrolysis time as a key factor in enhancing treatment efficiency, supported by a strong positive correlation between electrolysis time and TDY reduction. Energy cost savings were realized by not requiring temperature elevation. Achieving a 99.4% TDY removal translates to substantial reductions in other pollutants present in the MUPL, thereby elevating water quality and ensuring compliance.

Photocatalytic evaluation of synthesized MnO2/Fe3O4 NCs by Q. infectoria extract for removal Ni(II) and phenol: Study phytochemical, kinetics, thermodynamics, and antibioactivity

In the present study, the plant extract of the Quercus infectoria galls was used as a reducing, capping, and stabilizer agent for green synthesized MnO2 nanoparticles (NPs) and MnO2/Fe3O4 nanocomposites (NCs) due to its reduction ability from polyphenol and antioxidant content. The green synthesized nanomaterials have been characterized by various techniques such as FTIR, UV-vis, XRD, SEM, EDS, and TEM. The average size of about 7.4 and 6.88 nm was estimated for the NCs crystals of SEM images and XRD analysis by the Scherrer and Williamson-Hall methods. The green synthesized MnO2/Fe3O4 NCs (dosage: 0.1 g) have shown high photocatalytic activity for the removal of Ni(II) in acidic and basic solutions under visible irradiation (220 V lamp). The removal efficiency for the Ni(II) solution (3.6 × 10-3 M) at pH = 3 was increased to pH = 12 from 56 % to 98 %. The oxidase-like activity of MnO2/Fe3O4 NCs at different dosages (0.05, 0.1, and 0.15 g) for the removal and colorimetric of phenol (1 g/40 mL) in the presence 4-AAp (1 g) was seen after only 28, 13, and 5 s, respectively. The kinetic evaluation results showed the pseudo-second-order kinetics model closely matched the adsorption capacity theoretical values qe,cal (578.03, 854.70, 892.85, and 917.43 mg.g-1) and experimental values qe,exp (521.84, 839.74, 887.86, and 913.22 mg.g-1) at different initial pH solution (3-12) for Ni(II) removal. In addition, the investigation of isotherm models revealed that the Langmuir model (R2 = 0.9955) explains a better estimate for a monolayer and favorable removal of Ni(II) ions onto NCs. Also, the low Temkin constant, BT < 0 (0.0200 kJ.mol-1), and positive ∆H° value (0.103 kJ.mol-1.K-1) illustrated that Ni(II) removal is physical sorption and endothermic process. However, the obtained thermodynamic results showed the negative values ΔG° with the increase in temperature (303-318 K) toward a spontaneous removal process of Ni(II). Finally, the plant antioxidant (200 to 3200 μg/mL) and antimicrobial activities (0.001 to 0.1 g/mL) for plant extract, MnO2 NPs, and MnO2/Fe3O4 NCs were evaluated against Gram-positive and Gram-negative bacteria species.

Manganese-nitrogen co-doped biochar (MnN@BC) as particle electrode for three-dimensional (3D) electro-activation of peroxydisulfate: Active sites enhanced radical/non-radical oxidation

A novel manganese-nitrogen co-doped biochar (MnN@BC) was synthesized and used as particle electrodes in three-dimensional (3D) electro-activation of peroxydisulfate (PDS) for the degradation of refractory organic pollutants. All the spectroscopy (EDS, XRD, XPS, FTIR, and Raman) results indicated that Mn-N nanoclusters were successfully deposited and embedded in BC. The material appeared graphitized structure with more defects after Mn-N doping. MnN@BC in 3D electro-activation of PDS (E/MnN@BC/PDS) exhibited excellent performance in carbamazepine (CBZ) removal, with removal efficiency and degradation rates of 96.84% and 0.0582 min-1, respectively. Besides, MnN@BC was favorable for adsorption, electron transfer, and reactive oxidizing species (ROS) formation. MnN@BC had good recyclability in the E/MnN@BC/PDS system by the recycled experiments and characterization. Furthermore, quenching experiments, probe experiments, and electron paramagnetic resonance (EPR) analyses suggested that •OH and 1O2 were the main ROS in the E/MnN@BC/PDS system, and the non-radical oxidation take a key part. In addition, this system achieved excellent CBZ degradation under wide pH range of 3-11, had good tolerance to natural organic matter and inorganic ions, and was efficient to various water matrices and other refractory organic pollutants. These findings provided new insights into particle electrode design and mechanisms enhancement in electro-activated PDS systems.

Revealing the role of calcium alginate-biochar composite for simultaneous removing SO42- and Fe3+ in AMD: Adsorption mechanisms and application effects

The remediation of acid mine drainage (AMD) is particularly challenging because it contains a large amount of Fe³⁺ and a high concentration of SO₄^2-. To reduce the pollution caused by SO₄^2- and Fe³⁺ in AMD and realize the recycling of solid waste, this study used distillers grains as raw materials to prepare biochar at different pyrolysis temperatures. Calcium alginate-biochar composite (CA-MB) was further synthesized via the entrapment method and used to simultaneously remove SO₄^2- and Fe³⁺ from AMD. The effects of different influencing factors on the sorption process of SO₄^2- and Fe³⁺ were studied through batch adsorption experiments. The adsorption behaviors and mechanisms of SO₄^2- and Fe³⁺ were investigated with different adsorption models and characterizations. The results showed that the adsorption process of CA-MDB600 on SO₄^2- and Fe³⁺ could be well described by Elovich and Langmuir-Freundlich models. It was further proved by the site energy analysis that the adsorption mechanisms of SO₄^2- onto CA-MDB600 were mainly surface precipitation and electrostatic attraction, while that of Fe³⁺ removal was attributed to ion exchange, precipitation, and complexation. The applications of CA-MDB600 in actual AMD proved its good application potential. This study indicates that CA-MDB600 could be applied as a promising eco-friendly adsorbent for the remediation of AMD.

An economic, self-supporting, robust and durable LiFe5O8 anode for sulfamethoxazole degradation

Electrochemically activating peroxydisulfate (PDS) to degrade organic pollutants is one of the most attractive advanced oxidation processes (AOPs) to address environmental issues, but the high cost, poor stability, and low degradation efficiency of the anode materials hinder their application. Herein, an economic, self-supporting, robust, and durable LiFe₅O₈ on Fe substrate (Fe@LFO) anode is reported to degrade sulfamethoxazole (SMX). When PDS is electrochemically activated by the Fe@LFO anode, the degradation rate of SMX is significantly improved. It is found that hydroxyl radicals (•OH), superoxide radical (O₂^•-), singlet oxygen (¹O₂), Fe(Ⅳ), activated PDS (PDS*), and direct electron transfer (DET) reactions synergistically contribute to the degradation of SMX, which can realize the degradation of SMX in four possible routes: cleavage of the isoxazole ring, hydroxylation of the benzene ring, oxidation of the aniline group, and cleavage of the S-N bond, as evidenced by a series of tests of radicals quenching, electron paramagnetic resonance (EPR), linear sweep voltammetry (LSV) and liquid chromatograph mass spectrometer (LC-MS). Furthermore, Fe@LFO has good structural stability, excellent cyclability and low degradation cost, demonstrating its great potential for practical applications. This work contributes to a stable and effective anode material in the field of AOPs.

Controllable synthesis of FeMn bimetallic ferrocene-based metal-organic frameworks to boost the catalytic efficiency for removal of organic pollutants

A series of FeMn bimetallic ferrocene-based metal-organic frameworks (FeMn-Fc-MOFs) with various molar ratios of Fe and Mn (1:9, 2:8, 4:6, 6:4) were successfully synthesized using a simple hydrothermal synthesis method and employed as an efficient activator on persulfate (PS) activation for water decontamination. Characterizations demonstrated that Fe and Mn were smoothly introduced into ferrocene-based MOFs and various molar ratios of Fe:Mn had some influence on crystallinity and surface structure of FeMn-Fc-MOFs. Within 120 min, Fe₄Mn₆-Fc-MOFs demonstrated the best catalytic activity among the different molar ratios, and acid orange 7(AO7) degradation rate was up to 92.0%. In addition, electrochemical experiments revealed that Fe₄Mn₆-Fc-MOFs possessed superior electron transfer capability than other FeMn-Fc-MOFs, leading to better catalytic performance. Moreover, quenching tests and electron paramagnetic resonance (EPR) detection indicated that hydroxyl radicals and sulfate radicals were both responsible for AO7 decomposition. Notably, the redox cycle of Fe(II)/Fe(III) and Mn(II)/Mn(IV) was discovered in the Fe₄Mn₆-Fc-MOFs/PS system, which was considered as the limiting process for the cleavage of the O-O bond in PS to generate active radicals. Ultimately, the Fe₄Mn₆-Fc-MOFs exhibits an excellent universality and good cycling stability for 5 continuous runs. This paper broadens the application of ferrocene-based MOFs on heterogeneous PS activation in environmental catalysis.

Prolonged electrolysis injures the neural development of zebrafish (Danio rerio)

Recently, electrolysis technology has been widely applied in nitrogen and phosphorus removal in river water due to its high efficiency, but its effects on aquatic animals, especially on their neurodevelopmental system, are still unclear. In this study, zebrafish (Danio rerio) embryos were used as model organisms and were put into an electrolytic reaction device with a Ti/IrO₂/RuO₂ mesh plate as the anode and a Ti mesh plate as the cathode to explore the effects of prolonged electrolysis on the nervous system. The neural development of zebrafish embryos was injured when the current density was greater than 0.89 A/m². Compared with the control group, the movement speed of zebrafish larvae (120 h postfertilization, hpf) was significantly reduced from 65.48 ± 23.69 to 48.08 ± 22.73 mm/min in a dark environment with an electric current density of 0.89 A/m² in the electrolysis group. In addition, the acetylcholinesterase activity of zebrafish larvae (120 hpf) gradually decreased from 7.60 ± 0.55 to 6.00 ± 0.01 U/mg prot and the dopamine concentration was reduced from 46.96 ± 0.85 to 40.86 ± 1.05 pg/mL with an electric current density from 0 to 0.89 A/m² in the electrolysis groups. Furthermore, the expression of nerve-related genes (syn2a, mbp, nestin, and AChE) was significantly inhibited when the current density was more than 0.89 A/m². However, there were few adverse effects on the neural development of zebrafish embryos when the current density was less than 0.86 A/m². Thus, a current density of 0.86 A/m² is a reference value to reduce the harm to the neural development of fish when electrolysis technology is used in river water pollutant treatment.

A comprehensive review on persulfate activation treatment of wastewater

With increasingly serious environmental pollution and the production of various wastewater, water pollutants have posed a serious threat to human health and the ecological environment. The advanced oxidation process (AOP), represented by the persulfate (PS) oxidation process, has attracted increasing attention because of its economic, practical, safety and stability characteristics, opening up new ideas in the fields of wastewater treatment and environmental protection. However, PS does not easily react with organic pollutants and usually needs to be activated to produce oxidizing active substances such as sulfate radicals (SO₄^-) and hydroxyl radicals (OH) to degrade them. This paper summarizes the research progress of PS activation methods in the field of wastewater treatment, such as physical activation (e.g., thermal, ultrasonic, hydrodynamic cavitation, electromagnetic radiation activation and discharge plasma), chemical activation (e.g., alkaline, electrochemistry and catalyst) and the combination of the different methods, putting forward the advantages, disadvantages and influencing factors of various activation methods, discussing the possible activation mechanisms, and pointing out future development directions.

Decomplexation of Ni-EDTA by Three-Dimensional Electro-Fenton

Ni-ethylenediaminetetraacetic acid (Ni-EDTA) poses serious threats to the ecological environment and human health, due to its acute toxicity and low biodegradability. The decomplexation efficiency of Ni-EDTA through the conventional Fenton process has been constrained to pH; thus, other appropriate approaches are required to destroy the stable chelate structure at a neutral pH. In this study, the effect of operating parameters such as the pH, Fe2+ concentration, particle electrode dosage, current density, and coexisting ions was studied. The results revealed that the 3D-EF system owned advantages for the removal of Ni-EDTA in the broadening of the pH application window. The Ni-EDTA removal efficiency in the 3D-EF system reached 84.89% after 120 min at a pH of 7. In addition, the presence of coexisting ions slightly affected the decomplexation efficiency of Ni-EDTA.

Recent progress on ultrasound-assisted electrochemical processes: A review on mechanism, reactor strategies, and applications for wastewater treatment

The electrochemical advanced oxidation processes (EAOPs) have received significant attention among the many other water and wastewater treatment technologies. However, achieving a desirable removal effect with a single technique is frequently difficult. Therefore, the integration of ultrasound technique with other processes such as electrocoagulation, electro-Fenton, and electrooxidation is a critical way to achieve effective organic pollutants decomposition from wastewater. This review paper is focused on ultrasound-assisted electrochemical (US/electrochemical) processes, so-called sonoelectrochemical processes of various organic pollutants. Emphasis was given to recently published articles for discussing the results and trends in this research area. The use of ultrasound and integration with electrochemical processes has a synergistic impact owing to the physical and chemical consequences of cavitation, resulting in enhancing the mineralization of organic pollutants. Various types of sonoelectrochemical reactors (batch and continuous) employed in the US/electrochemical processes were reviewed. In addition, the strategies to avoid passivation, enhanced generation of reactive oxygen species, and mixing effect are reviewed. Finally, concluding remarks and future perspectives on this research topic are also explored and recommended.

Electrochemically activated peroxymonosulfate for the abatement of chloramphenicol in water: performance and mechanism

In this study, electrochemically activated peroxymonosulfate (EC/PMS) with a sacrificial iron electrode was used for the removal of chloramphenicol (CAP) from water. Compared to electrolysis alone, peroxymonosulfate (PMS) alone, and Fe2+/PMS, EC/PMS significantly enhanced the CAP degradation. Various parameters, such as the applied current, electrolyte concentration, and PMS dose, were investigated to optimize the process. In addition, acidic conditions facilitated the CAP degradation. The presence of Cl- slightly enhanced the CAP degradation, while both HCO3- and NO3- exhibited an inhibitory effect on the CAP degradation. The floccules were also analyzed after the reaction by XPS and XRD. Quenching experiments indicated that both sulfate radicals (SO4●-) and hydroxyl radicals (•OH) were responsible for the CAP degradation. In addition, the degradation products were identified by LC/TOF/MS, and the degradation pathways were proposed accordingly. These results indicated that EC/PMS is a promising treatment process for the remediation of water polluted by CAP.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Sunlight-induced photocatalytic degradation of organic pollutants by biosynthesized hetrometallic oxides nanoparticles

Dyes and phenols are extensively used chemicals in petrochemicals, pharmaceuticals, textile, and paints industries. Due to high persistence, bioaccumulation, and toxicity, their removal from the environment is highly imperative by advanced techniques. Single metal oxide nanomaterials are generally associated with limitations of large bandgap (> 3eV) and charge recombination. Therefore, heterometallic oxides (HMOs) as CuFe₂O₄, CuMn₂O₄, and MnZn₂O₄ have been synthesized via green route by employing leaf extract of Azadirachta indica. XRD revealed the crystalline nature of HMOs nanospheres with particle size less than 100 nm. Subsequently, HMOs nanocatalysts were used as photocatalyst for removal of 3-amino phenols (3-AP) and eriochrome black T (EBT) from water under sunlight. Reaction parameters namely pollutant concentration (50-130 mgL^-1), catalyst dose (20-100 mg), and pH (3-11) were optimized in order to get best results. Substantial degradation (80-95%) of pollutants (50 mgL^-1) by HMOs (80 mg) was achieved at neutral pH under sunlight exposure. Highest removal by CuFe₂O₄ might be due to its high surface area (35.7 m²g^-1), low band gap (2.4 eV), larger particle stability (Zeta potential: -22.0 mV), and lower photoluminescence intensity. Sharp declines in curves were visually confirmed by color change and indicated for first-order kinetics of degradation with initial Langmuir adsorption. Spectrophotometric analysis revealed that half-life (t_1/2) of 3-AP (0.9-1.7 h) and EBT (0.6-0.8 h) were significantly reduced. Faster degradation of EBT than 3-AP was because of less electronegative N-atom at the diazo group. Scavenger analysis indicated the presence of active radicals in photo-catalytic degradation of 3-AP and EBT. All HMOs have shown high reusability (n=8) which ensures their stability, sustainability, and efficiency. Overall, green synthesized HMOs nanoparticles with prominent surface characteristics offer a viable alternative photocatalyst for industrial applications.

Enhanced organics degradation by three-dimensional (3D) electrochemical activation of persulfate using sulfur-doped carbon particle electrode: The role of thiophene sulfur functional group and specific capacitance

For further enhancing the electrochemical oxidation performance, sulfur-doped carbon particle electrode was employed in the three-dimensional (3D) electro-assisted activation of persulfate process (ACS/PS/EC). Herein, an in situ S-doped activated carbon (ACS) was prepared and applied as the particle electrode as well as catalyst in ACS/PS/EC system. Several carbon particle electrodes with different annealing temperature were prepared and characterized via EA, BET, XPS and Raman spectra. Cyclic voltammetry (CV) was perform to obtain the specific capacitance and investigate the interfacial electron transfer of ACS particle. The results of comparative experiments showed significant synergy between electric and catalytic activations of PS. Especially, the as-prepared sample treated at 850 °C (ACS-850) exhibited an outstanding catalytic performance, and the phenol degradation rate was greatly improved by nearly 100% with the application of electric field. By comparing of several carbon particle electrodes with different functional groups and specific capacitances, it is revealed that thiophene sulfur functional group is the mainly active site for both electric and catalytic activation of PS, and the specific capacitance acts as assistant factor. Quenching experiments proved that the 3D electro-assisted activation of PS proceeded through both radical and non-radical pathway. Possible mechanism for ACS/PS/EC electrochemical process was proposed.

Enhancement of the electro-activated persulfate process in dye removal using graphene oxide nanoparticle

This study aimed to improve the speed of the electrochemical process by graphene oxide nanoparticle as a current accelerator in Acid Blue 25 removal from aqueous solutions. To do so, the effect of different parameters including pH, dye concentration, sodium persulfate concentration, the ratio of sodium persulfate to iron (II) sulfate concentration, current density, and the distance between electrodes was investigated on dye removal. Under optimal conditions of pH = 5, dye concentration = 200 mg/L, sodium persulfate concentration = 500 mg/L, iron (II) sulfate concentration = 100 mg/L, current density = 16.67 mA/cm², and electrode distance = 2 cm, 95% of dye was removed after 60 min in the electro-activated persulfate process; while the modified electro-activated persulfate process achieved 95% dye removal after only 40 min under the same conditions. This system was able to remove 90% of dye after 60 min at a higher concentration (300 mg/L). Also, the modified electro-activated persulfate process obtained the removal of 80% of COD, and 54% of TOC after 180 min in the mentioned conditions, for the dye concentration of 300 mg/L.

Activation of peroxymonosulfate using drinking water treatment residuals modified by hydrothermal treatment for imidacloprid degradation

In this study, water treatment residuals (WTRs), a safe and valuable by-product containing iron, was used as a precursor for preparing effective activator (HWTRs) of peroxymonosulfate (PMS) for imidacloprid (IMD) degradation by hydrothermal treatment. Several affecting parameters on IMD degradation including PMS concentration, HWTRs dosage, initial pH and water matrix were discussed. The results of degradation experiments demonstrated that within the reaction time of 4 h, 97.64% of IMD could be removed with 0.5 g L^-1 HWTRs and 1.5 mM PMS, and the acidic conditions were favorable for IMD degradation. Both sulfate radicals (SO₄^•-) and hydroxyl radicals (·OH) were generated to attack the target pollutant IMD, and ·OH was the dominating radical in the HWTRs/PMS system, which was confirmed by the results of radicals scavenging experiments, electron spin-resonance spectroscopy (ESR) tests and quantitative analysis. What's more, X-ray photoelectron (XPS) spectroscopy was used to further verify the activation mechanism. Consequently, the activation by Fe(II) on the surface of HWTRs might dominate the reaction was confirmed. In addition, the possible degradation pathways of IMD were proposed on the basis of the degradation intermediates identified by LC-MS. This study offers an innovative idea for modifying raw WTRs to prepare efficient catalysts to activate PMS under relatively mild conditions.

Electrochemical activation of persulfate on BDD and DSA anodes: Electrolyte influence, kinetics and mechanisms in the degradation of bisphenol A

The combination of electrolysis and persulfate (PS) activation was investigated to enhance the degradation of bisphenol A (BPA) using boron-doped diamond (BDD) and dimensional stable anode (DSA) in perchlorate, sulfate, and chloride media. The acceleration effect of BPA degradation followed the order of Cl^->ClO₄^->SO₄^2- in BDD/PS and BDD system, while the degradation order in DSA/PS and DSA system was Cl^->SO₄^2->ClO₄^-. The contribution of radical species (SO₄^- and OH), active chlorine and electrolysis were confirmed for the degradation in different media with PS. Active chlorine dominated the degradation process with 85 % and 60 % removal in BDD/PS and DSA/PS system at 10 min, while the contribution of SO₄^- decreased from 20 % and 18 % in perchlorate to 5 % and 6 % in chloride media, respectively. The aromatic intermediates resulting from hydroxylation and carboxylation pathway and chlorinated products via hydroxylation and chlorine substitution pathway were detected in perchlorate and chloride media in BDD/PS system, respectively. The attempt of BDD/PS system in actual wastewater indicated potential for further application. This study aims to provide a deep insight to comprehensively understand the enhanced performance, contributions of different removal mechanisms, and degradation pathway of pollutants during the activation of PS in BDD and DSA systems in different media.

Zero-valent iron/activated carbon microelectrolysis to activate peroxydisulfate for efficient degradation of chlortetracycline in aqueous solution

Tetracycline antibiotics are widely used in human and veterinary medicine; however, their gradual increase in the aquatic environment poses a serious threat to human health and ecosystems. The reactivity of peroxydisulfate (PDS) in the degradation of chlortetracycline (CTC) in aqueous solution using a zero-valent iron/activated carbon (AC) microelectrolysis method (Fe⁰–AC/PDS) was investigated by batch experiments. The results showed that the effects of different systems were as follows: Fe⁰–AC/PDS > Fe⁰/PDS > AC/PDS > Fe⁰–AC > AC > Fe⁰ > PDS. In the Fe⁰–AC/PDS system, the degradation efficiency of CTC could reach 88% under the following optimal experimental conditions: Fe⁰ dose of 0.4 g L⁻¹, PDS dose of 2 g L⁻¹, pH of 3 and initial CTC concentration of 50 mg L⁻¹. The presence of Cl⁻, HCO₃⁻ and H₂PO₄⁻ inhibited the degradation of CTC, while humic acid accelerated the degradation rate of CTC. The mineralization of CTC was evaluated from the TOC, with a value of 31.44% in 7 h. Free radical identification experiments showed that SO₄⁻˙ and O₂⁻˙ were involved in the degradation of CTC. The iron and carbon materials had good reusability, and the degradation rate of CTC was still approximately 70% after four cycles. Finally, the possible mechanism for the degradation of CTC by the Fe⁰–AC/PDS systems was discussed. Based on the above conclusions, Fe⁰–AC microelectrolysis is a new heterogeneous catalytic method for green and efficient activation of PDS and demonstrates potential applicability in the treatment of wastewater.

The microelectrolysis system composed of zero-valent iron and activated carbon can effectively activate persulfate to produce SO₄⁻˙ and O₂⁻˙, which have excellent capacity for degradation of chlortetracycline hydrochloride.

Precise control of iron activating persulfate by current generation in an electrochemical membrane reactor

Activated persulfate (PS) oxidation is promising for contaminant removal but a lack of controllable activation can lead to a loss of reagents and thus low contamination degradation. Herein, we have proposed and investigated an innovative method to control PS activation by introducing ion exchange membrane into electrochemically activated PS. This electrochemical membrane reactor (EMR) could precisely control PS activation by adjusting electrical current for slow release of Fe²⁺, and also avoid direct contact between PS and a sacrificial anode electrode (iron electrode)/an alkaline cathode solution. It was found that the PS decomposition rate constant was linearly increased by increasing the applied current (R² = 0.988). The rate of the released Fe²⁺ also exhibited a linear relationship with the applied current (R² = 0.995). Compared to one-time dosage of Fe²⁺, the EMR-based slow-release process had higher contamination degradation and better PS utilization (molar ratio of the decomposed PS to the migrated Fe, 1.04 ± 0.01:1), thereby minimizing the waste of both reaction reagents and generated radicals. The EMR was also employed to degrade a representative dye contaminant in a controllable manner and achieved 95.7 ± 0.7% removal percentage with PS dosage of 3.0 g L^-1 within 20 min. This study is among the earliest to explore effective approaches for precisely controlling PS activation and subsequent oxidation of contaminants.

Droplet flow-assisted heterogeneous electro-Fenton reactor for degradation of beta-blockers: response surface optimization, and mechanism elucidation

In this study, we report an effective degradation method for trace level beta-blockers (propranolol and acebutolol) in hospital wastewater using a new droplet flow-assisted heterogeneous electro-Fenton reactor (DFEF) system. Biogenic iron-carbon nanocomposites (RHS/C-x% Fe) as eco-friendly and low-cost heterogeneous Fenton catalysts were synthesized from rice husk via hydrolytic sol-gel routes. Here, we demonstrate the use of natural air as a nebulizing agent for fast and continuous catholyte air saturation and Fenton catalyst transfer to the cathode electrode. The effects of key operational parameters were evaluated and optimized using central composite design. Results clearly indicated that enhanced beta-blocker degradation was mainly dependent on the interactive effects of electrolysis time, current density, and catalyst dosage. Fast degradation efficiencies (≥ 99.9%) was recorded at neutral pH conditions. The decay followed pseudo-first-order kinetics with degradation rates of up to 2.72 × 10^-2 and 2.54 × 10^-2 min^-1 for acebutolol and propranolol, respectively. The synergistic contribution of ^•OH_bulk attributable to DFEF process and ^•OH_adsorbed for anodic oxidation (AO) at the anode electrode significantly enhanced the degradation process. Compared to AO, the conventional flow-assisted electro-Fenton (FEF), and the batch electro-Fenton (BEF), DFEF degradation efficiency followed a decreasing order: DFEF ˃ FEF ˃ BEF˃ AO. This trend in performance was mainly due to the fast and continuous cathodic electro-generation of H₂O₂ and Fe²⁺ regeneration. Additionally, in order to elucidate degradation mechanism, we used a combination of DFEF approach with liquid chromatography-tandem mass spectrometry analysis. This approach demonstrates a simple, cleaner, and highly efficient degradation approach for trace level recalcitrant pollutants in a complex aquatic matrix, without the need for external chemical addition and pH adjustment.

Mono and co-immobilization of imidazolium ionic liquids on silica: effects of the substituted groups on the adsorption behavior of 2,4-dinitrophenol

Ionic liquid modified silicas with high adsorption capacity for phenols prompt us to deeply explore the contribution of interactions between the adsorbent and adsorbate, with a particular focus on hydrophobicity, π–π, electrostatic and acid–base interactions. Herein, by introducing a series of typical substituent groups including N,N-dimethylaminopropyl (A), benzyl (B), dodecyl (D) and naphthylmethyl (N) in an imidazole ring (Im), three mono-immobilized and two co-immobilized imidazolium ionic liquid modified silicas, namely SilprAImCl, SilprBImCl, SilprNImCl, SilprDBImCl and SilprDAImCl, werre synthesized for removal and recovery of 2,4-dinitrophenol (2,4-DNP) from aqueous solutions. Adsorption kinetics, isotherms, thermodynamic analysis and desorption experiments have been carried out. The experimental results reveal that the substituent groups such as N,N-dimethylaminopropyl, benzyl and naphthylmethyl on the imidazole ring can significantly enhance the adsorption of 2,4-DNP via the acid–base interaction or π–π interaction and the adsorption capacity of 2,4-DNP follows the order: SilprNImCl > SilprAImCl > SilprBImCl. Furthermore, SilprDBImCl exhibits the largest adsorption capacity and SilprDAImCl has the lowest among the five adsorbents. These interesting finds indicate that the combination of hydrophobicity and π–π interactions lead to enhanced adsorption performance towards 2,4-DNP, while the combination of the hydrophobicity and acid–base interactions can restrain greatly adsorption of 2,4-DNP from aqueous medium. Adsorption mechanisms of 2,4-DNP on the five adsorbents have been clarified. These results will provide a deeper insight for efficient removal of phenols from water environments.

Ionic liquid modified silicas with high adsorption capacity for phenols prompt us to deeply explore the contribution of interactions between the adsorbent and adsorbate, with a particular focus on hydrophobicity, π–π, electrostatic and acid–base interactions.

Implementation of continuously electro-generated Fe3O4 nanoparticles for activation of persulfate to decompose amoxicillin antibiotic in aquatic media: UV254 and ultrasound intensification

In the present investigation, the treatment of amoxicillin (AMX)-polluted water by the activated persulfate (PS) was considered. As a novel research, continuously electro-generated magnetite (Fe₃O₄) nanoparticles (CEMNPs) were utilized as the activator of PS in an electrochemical medium. The PS/CEMNPs displayed a remarkable enhancement in the decomposition of AMX molecules up to 72.6% compared with lonely PS (24.8%) and CEMNPs (13.4%). On the basis of pseudo-first order reaction rate constants, the synergy percent of about 70% was achieved due to the combination of PS with CEMNPs. The adverse influence of free radical-scavenging compounds on the efficiency of the PS/CEMNPs process was in the following order: carbonate < chloride < tert-butyl alcohol < ethanol. Overall, these results proved the main role of free radical species in degrading AMX. The implementation of ultrasound (US) enhanced the performance of the PS/CEMNPs process. Nevertheless, the highest degradation efficiency of about 94% was achieved when UV₂₅₄ lamp was joined the PS/CEMNPs system. Under UV₂₅₄ and US irradiation, the results showed significant potential of the PS/CEMNPs process for degrading AMX antibiotic and generating low toxic effluent based on the activated sludge inhibition test. However, more time is needed to achieve the acceptable mineralization.