Magnetic zeolite imidazole framework material-8 as an effective and recyclable adsorbent for removal of ceftazidime from aqueous solution

Comprehensive review on pH and temperature-responsive polymeric adsorbents: Mechanisms, equilibrium, kinetics, and thermodynamics of adsorption processes for heavy metals and organic dyes

Wastewater treatment technologies have been developed to address the health and environmental risks associated with toxic and cancer-causing dyes and heavy metals found in industrial waste. The most commonly used method to mitigate and treat such effluents is adsorption, which is favored for its high efficiency, low costs, and ease of operation. However, traditional adsorbents have limitations in terms of regeneration and selectivity compared to smart adsorbents. Smart polymeric adsorbents, on the other hand, can undergo physical and chemical changes in response to external factors like temperature and pH, enabling a selective adsorption process. These adsorbents can be easily regenerated and reused with minimal generation of secondary pollutants during desorption. The unique properties acquired by stimuli-responsive adsorbents have encouraged researchers to investigate their potential for the selective and efficient removal of organic dyes and heavy metals. This comprehensive review focuses on two common stimuli, pH and temperature, discussing the fabrication methods and characteristics of smart adsorbents responsive to these factors. It also provides an overview of the mechanisms, isotherms, kinetics, and thermodynamics of the adsorption process for each type of stimuli-responsive adsorbent. Finally, the review concludes with discussions on future perspectives and considerations.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

Ultra-High Adsorption Capacity of Core-Shell-Derived Magnetic Zeolite Imidazolate Framework-67 as Adsorbent for Selective Extraction of Theophylline

A core-shell-derived structural magnetic zeolite imidazolate framework-67 (Fe₃O₄-COOH@ZIF-67) nanocomposite was fabricated through a single-step coating of zeolite imidazolate framework-67 on glutaric anhydride-functionalized Fe₃O₄ nanosphere for the magnetic solid-phase extraction (MSPE) of theophylline (TP). The Fe₃O₄-COOH@ZIF-67 nanocomposite was characterized through scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, Zeta potential analysis, X-ray diffraction, Brunauer-Emmett-Teller, and vibrating sample magnetometer. The material has a high specific surface area and good magnetism, which maintains the regular dodecahedron structure of ZIF-67 without being destroyed by the addition of Fe₃O₄-COOH nanospheres. The Fe₃O₄-COOH@ZIF-67 can rapidly adsorb TP mainly through the strong coordination interaction between undercoordinated Co²⁺ on ZIF-67 and -NH from imidazole of TP. The adsorption and desorption conditions, such as the amount of adsorbent, adsorption time, pH value, and elution solvent, were optimized. The kinetics of TP adsorption on Fe₃O₄-COOH@ZIF-67 was found to follow pseudo-second-order kinetics. The Langmuir model fits the adsorption data well and the maximum adsorption capacity is 1764 mg/g. Finally, the developed MSPE-HPLC method was applied in the enrichment and analysis of TP in four tea samples and rabbit plasma. TP was not detected in oolong tea and rabbit plasma, and its contents in jasmine tea, black tea, and green tea are 5.80, 4.31, and 1.53 μg/g, respectively. The recoveries of spiked samples are between 74.41% and 86.07% with RSD in the range of 0.81-3.83%. The adsorption performance of Fe₃O₄-COOH@ZIF-67 nanocomposite was nearly unchanged after being stored at room temperature for at least 80 days and two consecutive adsorption-desorption cycles. The results demonstrate that Fe₃O₄-COOH@ZIF-67 nanocomposite is a promising magnetic adsorbent for the preconcentration of TP in complex samples.

Effective adsorptive removal of sulfamethoxazole (SMX) from aqueous solution by ZIF-8 derived adsorbent ZC-0.5

Efficient removal of antibiotics from the aquatic environment is urgently needed due to their obstinate accumulation and non-biodegradability. In this study, a mesoporous carbon material (ZC-0.5) was successfully synthesized for the adsorption of sulfamethoxazole (SMX), one of the major antibiotics for the treatment of human and animal infections. ZIF-8 as the precursor of ZC-0.5, specifically, using cetyl trimethyl ammonium bromide (CTAB) and sodium laurate (SL) as dual templates and carbonizing at 800 ℃. This novel adsorbent exhibited a high proportion of mesopore (75.64%) and a large specific surface area (1459.73 m²·g^-1). The adsorption experiment examined the reusability of ZC-0.5 and that it could retain superior maximum adsorption capacities (167.45 mg∙L^-1) after five cycles of adsorption and desorption. The adsorption process satisfied the pseudo-second-order kinetic (PSO) and mixed first- and second-order kinetic (MOE). It also satisfied the Freundlich and Sips isotherm models. Moreover, thermodynamic calculation indicated the adsorption process was spontaneous, endothermal, and entropy-increasing. Furthermore, plausible adsorption mechanisms were explained through van der Waals force, electrostatic interaction, hydrophobic force, π-π interaction, and hydrogen bond. This work offers a new efficient adsorbent for antibiotic elimination.

The effects of UiO-66 ultrafine particles on the rapid detection of sulfonamides in milk: Adsorption performance and mechanism

Nanoscale MOFs particles possess both excellent adsorption and dispersion properties. In this study, ultrafine particles UiO-66 (UP/UiO-66) with a particle size below 50 nm were synthesised by a template-controlled method. UP/UiO-66 was able to achieve a maximum adsorption capacity of 139.64 mg/g for 5 methoxylated sulfonamides. Adsorption studies showed that UP/UiO-66 adsorption of sulfonamides can be classified as a pseudo-secondary kinetic adsorption model for single molecular layer adsorption. ELISA (validated by Raman and molecular docking) showed that the sulfonamide molecule was still immunoreactive with antibodies after adsorption by UP/UiO-66. In 15 min, UP/UiO-66 could be used directly in the ELISA test for sulfonamides in milk without elution and separation. The LOQ (IC₂₀) of UP/UiO-66-ELISA for sulfonamides in milk was 0.21-2.05 ng/mL. The ultrafine particle strategy of UiO-66 is expected to be applied to other MOFs and used as a general pretreatment material for residue monitoring in complex matrices.

Facile synthesis of triazine-based microporous organic network for high-efficient adsorption of flumequine and nadifloxacin: A comprehensive study on adsorption mechanisms and practical application potentials

Flumequine (FLU) and nadifloxacin (NAD), as emerging contaminants, have received extensive attention recently. In this study, a triazine-based microporous organic network (TMON) was synthetized and developed as an excellent adsorbent for FLU and NAD. The adsorption behavior and influence factors were investigated in both single and binary systems. Insight into the adsorption mechanisms were conducted through experiments, models, and computational studies, from macro and micro perspectives including functional groups, adsorption sites, adsorption energy and frontier molecular orbital. The results showed that the maximum adsorption capacities of TMON for FLU and NAD are 325.27 and 302.28 mg/g under 30 °C higher than records reported before. TMON exhibits the better adaptability and anti-interference ability for influence factors, leading to the preferable application effect in kinds of real water samples. TMON also shows the application potentials for the adsorption of other quinolone antibiotics and CO₂ capture. Hydrogen-bonding interaction played the most critical role compared to π-π stacking effect, π-π electron-donor-acceptor interaction, CH-π interaction, and hydrophobic interaction during the adsorption. TMON could be regarded as a promising environmental adsorbent for its large surface area, stable physical and chemical properties, excellent recyclability, and wide range of applications.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

New insight into the co-adsorption of oxytetracycline and Pb(II) using magnetic metal-organic frameworks composites in aqueous environment: co-adsorption mechanisms and application potentials

The present study aimed to investigate the co-adsorption and application of water stabilized Fe₃O₄@ZIF-8 composite with magnetic cubic crystal structure. This new material was successfully prepared by facile modification strategy and rational design, which was used for simultaneous adsorption of oxytetracycline (OTC) and Pb(II) in aqueous solution. The co-adsorption behavior and mechanism of the composite for OTC and Pb(II) were systematically investigated by characterization techniques and batch experiments, and its application potential was effectively evaluated. The results showed that the synthesized Fe₃O₄@ZIF-8 composite innovatively retained the cubic crystal structure of ZIF-8 and was successfully loaded on the surface of Fe₃O₄ particles with small particle size to form a core-shell structure. The Fe₃O₄@ZIF-8 composite possessed a large specific surface area (1722 m²/g), magnetic separation performance (13.4 emu/g), and rich functional groups. The co-adsorption of OTC and Pb(II) on Fe₃O₄@ZIF-8 had fast reaction kinetics (equilibrium within 90 min) and large adsorption capacity (310.29 mg/g and 276.06 mg/g respectively). The adsorption process for both contaminants followed pseudo-second order kinetics and Langmuir isotherm models and had synergistic and competitive effects at the same time. π-π stacking and electrostatic interaction were the main mechanisms of adsorption. Fe₃O₄@ZIF-8 had good adsorption performance after cyclic adsorption for 4 times and it performed well in the treatment of real waste water. This study provided a new sight for the control of combined pollution of OTC and Pb(II) and proved Fe₃O₄@ZIF-8 composites have great application potentials for complex wastewater treatment.

Enhanced bioelectrochemical performance of microbial fuel cell with titanium dioxide-attached dual metal organic frameworks grown on zinc aluminum - layered double hydroxide as cathode catalyst

In this study, a three-step distributed feeding method was used to prepare TiO₂-attached dual CoZn-metal organic frameworks growing on ZnAl-layered double hydroxide (TiO₂@ZIF-67/ZIF-8@ZnAl-LDH) as cathode catalyst of microbial fuel cell (MFC). The composite material was a composite core-shell structure constructed by multi-layer coating with sheet-like ZnAl-LDH as the base, dual MOFs as the magnetic core and TiO₂ as the rough surface. The composite material had crystal planes (009), (110), (101) interface. The rough surface, core-shell core and polyhedral structure of TiO₂@ZIF-67/ZIF-8@ZnAl-LDH were observed. The complete distribution of Ti, Zn, Al, and Co in the material was observed and offered active sites. The contents of Ti (15.97 %), Al (5.53 %), Na (5.04 %), N (3.52%), Zn (1.47 %) were found out. TiO₂@ZIF-67/ZIF-8@ZnAl-LDH was excellent in electrochemical activity and the maximum power density was 409.6 mW/m², the stable continuous output voltage was 538.4 mV for 8 d.

Improving oxygen reduction reaction of microbial fuel cell by titanium dioxide attaching to dual metal organic frameworks as cathode

In this study, a two-step simple distributed feeding method was used to prepare the core-shell nanocomposite dual metal organic frameworks (D-MOFs, TiO₂@ZIF-67/ZIF-8). There were three obvious peaks (011), (112), (222) interface in D-MOFs core, which fully showed that ZIF-67/ZIF-8 crystal core was successfully synthesized. The morphology of composite material was core-shell structure with a rough surface, and Ti, Co, Zn, Al were uniformly distributed on the surface. TiO₂@ZIF-67/ZIF-8 also had excellent electrochemical activity and the maximum power density of TiO₂@ZIF-67/ZIF-8 microbial fuel cell (MFC) was 341.506 mW/m², which was 1.30 times of ZIF-67/ZIF-8-MFC (262.144 mW/m²) and 2.07 times of ZIF-67-MFC (164.836 mW/m²). And the continuous output voltage of TiO₂@ZIF-67/ZIF-8-MFC was 413.43 mV, which could maintain stable voltage output for 8.3 days. D-MOFs as the core of composites ensured the integrity, stability and high activity of materials; Rough TiO₂ as the surface of the material provided surface area and reaction center.

Facile fabrication of N-doped hierarchical porous carbons derived from soft-templated ZIF-8 for enhanced adsorptive removal of tetracycline hydrochloride from water

N-doped hierarchical porous carbons (NHPCs) were successfully prepared from soft-templated zeolitic imidazolate framework-8 (ZIF-8) precursors using sodium dodecylbenzene sulfonate (SDBS) as a template through facile one-step carbonization and applied in tetracycline hydrochloride (TCH) adsorption. The NHPC synthesized at 1000 °C with an SDBS/Zn²⁺ molar ratio of 0.075 exhibited the highest TCH adsorption (q_m = 80.92 mg g^-1) owing to its relatively large BET surface area (1067.41 m² g^-1) and pore volume (1.22 cm³ g^-1) and the stronger surface interaction between TCH and NHPCs (HC1000-0.075). Compared with surfactant-free ZIF-8-derived carbon (HC), introduction of SDBS in the ZIF-8 precursor not only improved the pore structure of the carbon materials but also increased the nitrogen content and the number of surface functional groups. Adsorption kinetics and isotherms showed that the pseudo-second-order model and Sips model fit the TCH adsorption behavior on HC and HC1000-0.075 well. Adsorption experiments and characterizations revealed that the adsorption mechanism involved in TCH adsorption on HC1000-0.075 mainly depended on the synergistic effect of pore filling, H-bonding, π-π interactions, and weak electrostatic interactions. This study provides an effective and simple strategy for fabricating MOF-derived NHPCs as a promising adsorbent for the removal of antibiotics from water.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

Preparation of metal organic framework derived materials CoFe2O4@NC and its application for degradation of norfloxacin from aqueous solutions by activated peroxymonosulfate

The metal organic framework derived materials (CoFe₂O₄@NC) activated peroxymonosulfate (PMS) to degrade Norfloxacin (NOR) owing to the characteristics of high surface area (109.658 m² g^-1) and abundant mesoporous structure. The characterization results demonstrated that the optimal ratio of bimetal and of bimetallic to organic ligands (M/O) had good crystal structure and stability (Fe/Co = 3:1, M/O = 2:1). Moreover, NOR (10 mg L^-1) removal of 98.78% was achievable in 60 min with an optimum concentration of PMS (0.32 mM) and dosage of CoFe₂O₄@NC (0.1 g L^-1). The radical quenching results suggested that SO₄·^-, ·OH and ¹O₂ functioned in the presence of the system certificated by XPS spectra. The presence of Cl^- and CO₃^2-/HCO₃^- promoted the catalyst reaction. The recoverability revealed high removal efficiency of NOR of 93.55% could still be maintained. Furthermore, four pathways of NOR degradation were proposed, including dehydroxylation, defluorination, quinolone group conversion and piperazine ring transformation, which were attributed to the synergy of reactive oxygen species. The above results highlight that the method is of great significance to the practical application of heterogeneous catalysts in aqueous solutions.

Efficacy of Different Waste and By-Products from Forest and Food Industries in the Removal/Retention of the Antibiotic Cefuroxime

Environmental pollution due to antibiotics is a serious problem. In this work, the adsorption and desorption of the antibiotic cefuroxime (CFX) were studied in four by-products/residues from the forestry and food industries. For this, batch-type experiments were carried out, adding increasing concentrations of CFX (from 0 to 50 µmol L−1) to 0.5 g of adsorbent. The materials with a pH higher than 9 (mussel shell and wood ash) were those that presented the highest adsorption percentages, from 71.2% (23.1 µmol kg−1) to 98.6% (928.0 µmol kg−1). For the rest of the adsorbents, the adsorption was also around 100% when the lowest concentrations of CFX were added, but the percentage dropped sharply when the highest dose of the antibiotic was incorporated. Adsorption data fitted well to the Langmuir and Freundlich models, with R2 greater than 0.9. Regarding desorption, the materials that presented the lowest values when the highest concentration of CFX was added were wood ash (0%) and mussel shell (2.1%), while pine bark and eucalyptus leaves presented the highest desorption (26.6% and 28.6%, respectively). Therefore, wood ash and mussel shell could be considered adsorbents with a high potential to be used in problems of environmental contamination by CFX.

Ionic Liquid-Functionalized Magnetic Metal-Organic Framework Nanocomposites for Efficient Extraction and Sensitive Detection of Fluoroquinolone Antibiotics in Environmental Water

Herein, the hydrophobic carboxyl-functionalized ionic liquid (IL-COOH) was encapsulated into the prepared Fe₃O₄@Zr-MOFs, and the novel water-stable IL-COOH/Fe₃O₄@Zr-MOF nanocomposites were first synthesized. The polydopamine-functionalized Fe₃O₄ was introduced to construct the core-shell structure via layer-by-layer modification, and the controlled growth of Zr-MOFs was achieved, which realized the adjustment of charged properties of nanocomposites and simplified the adsorption or extraction process. The IL-COOH/Fe₃O₄@Zr-MOFs were fully studied by IR, HNMR, XRD, N₂ adsorption-desorption isotherms, TEM, EDS mapping, VSM, and so on. Then, they were employed for the selective adsorption and detection of fluoroquinolone antibiotics (FQs). The adsorption isotherms and kinetics demonstrated that the adsorption process followed a pseudo-second-order kinetic model and the Langmuir isotherm model. Among them, IL-COOH/Fe₃O₄@UiO-67-bpydc showed the best adsorption performance, and the maximum adsorption capacity of ofloxacin was 438.5 mg g^-1. Coupled magnetic solid-phase extraction with HPLC-DAD, a convenient, sensitive, and efficient method for extraction and detection of FQs in environmental water, was developed based on IL-COOH/Fe₃O₄@UiO-67-bpydc. The recoveries of environmental water were ranging from 90.0 to 110.0%, and the detection limits were lower than 0.02 μg L^-1. The novel functionalized composites served as solid-phase adsorbents and liquid-phase extractants. This study also provided a promising strategy for designing and preparing multi-functionalized nanocomposites for the removal or detection of pollutants in environmental samples.

Adsorptive removal of pharmaceuticals from water using metal-organic frameworks: A review

Pharmaceutical pollution has emerged as a highly concerned issue due to its adverse effects. Elevated concentrations of pharmaceuticals in water should be regulated to satisfy the requirement for the provision of clean water. Metal-organic frameworks (MOFs) with high specific surface area, controllable porous structure, and facile modification can serve as promising adsorbents for the removal of pharmaceutical contaminants from water. In this review, a selected collection illustrating the reliable strategies and concepts to prepare the MOFs-based materials with superior water stability is described. In addition, recent progress on the adsorptive removal of pharmaceutical pollutant using burgeoning and functional MOFs is also summarized in terms of maximum capacity, equilibrium time, and regenerate ability. Meanwhile, to understand the adsorption mechanism, related interactions including coordination with unsaturated site, pore-filling effect, hydrogen bonding, electrostatic, and π-π stacking are further discussed. Finally, critical perspectives/assessment of future research emphasising on fabricating desirable MOFs and establishing structure-property relationships to facilitate capture performance are identified.

Nanomotor-based adsorbent for blood Lead(II) removal in vitro and in pig models

Blood lead (Pb(II)) removal is very important but challenging. The main difficulty of blood Pb(II) removal currently lies in the fact that blood Pb(II) is mainly complexed with hemoglobin (Hb) inside the red blood cells (RBCs). Traditional blood Pb(II) removers are mostly passive particles that do not have the motion ability, thus the efficiency of the contact between the adsorbent and the Pb(II)-contaminated Hb is relatively low. Herein, a kind of magnetic nanomotor adsorbent with movement ability under alternating magnetic field based on Fe₃O₄ nanoparticle modified with meso-2, 3-dimercaptosuccinic acid (DMSA) was prepared and a blood Pb(II) removal strategy was further proposed. During the removal process, the nanomotor adsorbent can enter the RBCs, then the contact probability between the nanomotor adsorbent and the Pb(II)-contaminated Hb can be increased by the active movement of nanomotor. Through the strong coordination of functional groups in DMSA, the nanomotor adsorbent can adsorb Pb(II), and finally be separated from blood by permanent magnetic field. The in vivo extracorporeal blood circulation experiment verifies the ability of the adsorbent to remove blood Pb(II) in pig models, which may provide innovative ideas for blood heavy metal removal in the future.