A magnetic relaxation switching and visual dual-mode sensor for selective detection of Hg2+ based on aptamers modified Au@Fe3O4 nanoparticles

A novel magnetic resonance tuning-magnetic relaxation switching sensor based on Gd-MOF/USPIO assembly for sensitive and convenient aflatoxin B1 detection

Aflatoxin B1 (AFB1) can accumulate in different organs or tissues and seriously harm humans. Traditional magnetic relaxation switching (MRS) sensors have relatively low sensitivity, but are complex to use. Rapid small-trace molecule analysis in complex samples is challenging. In this study, we used a gadolinium-based metal-organic framework (Gd-MOF) and ultra-small superparamagnetic iron oxide (USPIO) assembly to develop a magnetic resonance tuning-magnetic relaxation switching (MRET-MRS) sensor to improve conventional MRS sensor sensitivity and simplify operational steps in complex samples. Importantly, the local magnetic field generated by USPIO interfered with Gd-MOF electron spin fluctuation and directly affected dipole-dipole interactions between Gd electrons and water molecules, thus rendering relaxation signal changes more sensitive. The sensitivity (0.54 pg mL-1) was 833 times more sensitive than that of a conventional MRS sensor (0.45 ng mL-1). Finally, a convenient one-step detection approach can be achieved by mixing antigen/antibody functionalized Gd-MOF/USPIO and target samples.

Oxygen vacancies-driven signal enhanced photoelectrochemical sensor for mercury ions detection

Mercury ion (Hg2+) poses a serious threat to human health due to its high toxicity. In this study, a smartphone-based photoelectrochemical sensor based on oxygen vacancies (OVs) driven signal enhancement for mercury ion detection was designed. BiVO4-x/Bi2S3/AuNPs were combined with T-Hg2+-T recognition mode to construct a multi-sandwich photoelectrochemical sensor. On the one hand, the OVs can increase the adsorption of light by the materials and enhance the photocurrent response as well as the superconductivity of Au NPs to accelerate the charge transfer at the electrode interface. On the other hand, the multi-sandwich structure was exploited to increase the binding site of Hg2+, as well as the T-Hg2+-T structure for sensitive recognition of Hg2+ and signal amplification. The sensor showed good linearity for Hg2+ concentration in the range of 0.1 nM-1.0 μM with a detection limit of 4.8 pM (S/N = 3). Eventually the smartphone-based real-time detection sensor is expected to contribute to the future analysis of heavy metal ions.

Multi-modal nanoprobe-enabled biosensing platforms: a critical review

Nanomaterials show great potential for applications in biosensing due to their unique physical, chemical, and biological properties. However, the single-modal signal sensing mechanism greatly limits the development of single-modal nanoprobes and their related sensors. Multi-modal nanoprobes can realize the output of fluorescence, colorimetric, electrochemical, and magnetic signals through composite nanomaterials, which can effectively compensate for the defects of single-modal nanoprobes. Following the multi-modal nanoprobes, multi-modal biosensors break through the performance limitation of the current single-modal signal and realize multi-modal signal reading. Herein, the current status and classification of multi-modal nanoprobes are provided. Moreover, the multi-modal signal sensing mechanisms and the working principle of multi-modal biosensing platforms are discussed in detail. We also focus on the applications in pharmaceutical detection, food and environmental fields. Finally, we highlight this field's challenges and development prospects to create potential enlightenment.

Recent progress of MOF-functionalized nanocomposites: From structure to properties

Metal-organic frameworks (MOFs) are novel crystalline porous materials assembled from metal ions and organic ligands. The adaptability of their design and the fine-tuning of the pore structures make them stand out in porous materials. Furthermore, by integrating MOF guest functional materials with other hosts, the novel composites have synergistic benefits in numerous fields such as batteries, supercapacitors, catalysis, gas storage and separation, sensors, and drug delivery. This article starts by examining the structural relationship between the host and guest materials, providing a comprehensive overview of the research advancements in various types of MOF-functionalized composites reported to date. The review focuses specifically on four types of spatial structures, including MOFs being (1) embedded in nanopores, (2) immobilized on surface, (3) coated as shells and (4) assembled into hybrids. In addition, specific design ideas for these four MOF-based composites are presented. Some of them involve in situ synthesis method, solvothermal method, etc. The specific properties and applications of these materials are also mentioned. Finally, a brief summary of the advantages of these four types of MOF composites is given. Hopefully, this article will help researchers in the design of MOF composite structures.

Engineered Electrochemiluminescence Biosensors for Monitoring Heavy Metal Ions: Current Status and Prospects

Metal ion contamination has serious impacts on environmental and biological health, so it is crucial to effectively monitor the levels of these metal ions. With the continuous progression of optoelectronic nanotechnology and biometrics, the emerging electrochemiluminescence (ECL) biosensing technology has not only proven its simplicity, but also showcased its utility and remarkable sensitivity in engineered monitoring of residual heavy metal contaminants. This comprehensive review begins by introducing the composition, advantages, and detection principles of ECL biosensors, and delving into the engineered aspects. Furthermore, it explores two signal amplification methods: biometric element-based strategies (e.g., HCR, RCA, EDC, and CRISPR/Cas) and nanomaterial (NM)-based amplification, including quantum dots, metal nanoclusters, carbon-based nanomaterials, and porous nanomaterials. Ultimately, this review envisions future research trends and engineered technological enhancements of ECL biosensors to meet the surging demand for metal ion monitoring.

Calix[4]arene-based Supramolecular Gels for Mercury Ion Removal in Water

A calix[4]arene-based gelator 1, with lower-rim mono triazolylpyridine group, capable of spontaneous self-assembly into microspheres in different ethanol/H2 O mixtures, is synthesized. The concentration-dependent 1 H NMR spectra and X-ray single-crystal structure of 1 provided evidence for self-assembly of gelator 1 via cooperative interactions of intermolecular noncovalent forces. Furthermore, metallogels by self-assembly of 1 was found to exhibit remarkable selectivity toward Hg2+ ions. 1 H NMR spectra support that Hg2+ ion was bound to the nitrogen atoms of two coordination sites of 1, which composed of triazole and pyridine. Moreover, the results of field emission scanning electron microscopy and rheology experiments indicated that Hg2+ ions not only enhanced the gelling ability of gelator 1 in ethanol but also led to morphological change of its self-assembly through metal-ligand interactions. Finally, the in situ gelation, triggered by mixing a gelator solution of 1 in ethanol with water samples such as deionized (DI), tap, and lake water, leads to the effective removal of Hg(II) from a water sample which reduced from 400 to 1.6 ppm.

Recent Advances in the DNA-Mediated Multi-Mode Analytical Methods for Biological Samples

DNA-mediated nanotechnology has become a research hot spot in recent decades and is widely used in the field of biosensing analysis due to its distinctive properties of precise programmability, easy synthesis and high stability. Multi-mode analytical methods can provide sensitive, accurate and complementary analytical information by merging two or more detection techniques with higher analytical throughput and efficiency. Currently, the development of DNA-mediated multi-mode analytical methods by integrating DNA-mediated nanotechnology with multi-mode analytical methods has been proved to be an effective assay for greatly enhancing the selectivity, sensitivity and accuracy, as well as detection throughput, for complex biological analysis. In this paper, the recent progress in the preparation of typical DNA-mediated multi-mode probes is reviewed from the aspect of deoxyribozyme, aptamer, templated-DNA and G-quadruplex-mediated strategies. Then, the advances in DNA-mediated multi-mode analytical methods for biological samples are summarized in detail. Moreover, the corresponding current applications for biomarker analysis, bioimaging analysis and biological monitoring are introduced. Finally, a proper summary is given and future prospective trends are discussed, hopefully providing useful information to the readers in this research field.

From Nanoscopic to Macroscopic Materials by Stimuli-Responsive Nanoparticle Aggregation

Stimuli-responsive nanoparticle (NP) aggregation plays an increasingly important role in regulating NP assembly into microscopic superstructures, macroscopic 2D, and 3D functional materials. Diverse external stimuli are widely used to adjust the aggregation of responsive NPs, such as light, temperature, pH, electric, and magnetic fields. Many unique structures based on responsive NPs are constructed including disordered aggregates, ordered superlattices, structural droplets, colloidosomes, and bulk solids. In this review, the strategies for NP aggregation by external stimuli, and their recent progress ranging from nanoscale aggregates, microscale superstructures to macroscale bulk materials along the length scales as well as their applications are summarized. The future opportunities and challenges for designing functional materials through NP aggregation at different length scales are also discussed.

Recent Advances in Biomolecular Detection Based on Aptamers and Nanoparticles

The fast, accurate detection of biomolecules, ranging from nucleic acids and small molecules to proteins and cellular secretions, plays an essential role in various biomedical applications. These include disease diagnostics and prognostics, environmental monitoring, public health, and food safety. Aptamer recognition (DNA or RNA) has gained extensive attention for biomolecular detection due to its high selectivity, affinity, reproducibility, and robustness. Concurrently, biosensing with nanoparticles has been widely used for its high carrier capacity, stability and feasibility of incorporating optical and catalytic activity, and enhanced diffusivity. Biosensors based on aptamers and nanoparticles utilize the combination of their advantages and have become a promising technology for detecting of a wide variety of biomolecules with high sensitivity, reliability, specificity, and detection speed. Via various sensing mechanisms, target biomolecules have been quantified in terms of optical (e.g., colorimetric and fluorometric), magnetic, and electrical signals. In this review, we summarize the recent advances in and compare different aptamer-nanoparticle-based biosensors by nanoparticle types and detection mechanisms. We also share our views on the highlights and challenges of the different nanoparticle-aptamer-based biosensors.

Recent advances in gold nanoparticle-based colorimetric aptasensors for chemical and biological analyses

Aptasensors are amazing among many currently formed procedures due to their excellent particularity, selectivity and responsiveness. These biosensors get more popular in combination with gold nanoparticles (AuNPs) to detect chemical and biological molecules. The response of AuNPs by changing color provides a simple explanation of outcomes. The authors review the recent developments in AuNP-based colorimetric aptasensors designed to sense different chemical and biological molecules. They summarize the procedure of AuNP-based detection and the ordinary instances of currently formed AuNP-based colorimetric procedures. Furthermore, their uses for detecting different analytes based on analyte types are given and the present challenges, overview, and positive views for forming new aptasensors are also regarded.

Magnetic Relaxation Switch Sensor Based on Magnetophoresis and "T-Hg(II)-T" Signal Amplification

In this study, we designed a magnetic relaxation switch (MRS) sensor combined with magnetophoresis technology (MS-MRS), which helps solve the problems of traditional MRS sensors. The sensor is based on a new combined magnet and is composed of small magnetic blocks and iron sheets that can rapidly separate magnetic nanoparticles of different sizes within 5 min. The MS-MRS sensor consists of aptamer-functionalized magnetic nanoparticles (diameter: 200 nm) (MNP₂₀₀-Apt), complementary DNA-functionalized magnetic nanoparticles (diameter: 20 nm) (MNP₂₀-cDNA), and a combined magnet ("M2" magnet). The MNP₂₀₀-Apt probe could be separated by an "M2" magnet but the MNP₂₀-cDNA probe could not. To further improve the sensitivity of the sensor, we successfully constructed an MS-MRS-Hg sensor based on the "T-Hg(II)-T" specific recognition that aggregated MNP₂₀-cDNA probes to amplify the relaxation signal. The detection working range of the MS-MRS sensor is 0.5-100 ng/mL and that of the MS-MRS-Hg sensor is 0.05-100 ng/mL. Their limit of detection (LOD) values are 0.15 and 0.01 ng/mL, respectively. The relative recoveries of the MS-MRS and MS-MRS-Hg sensors are 95.2-119.5% and 93.1-113.1%, respectively. These results indicate that the proposed sensors have a high accuracy level.

"Three-in-One" Multifunctional Nanohybrids with Colorimetric Magnetic Catalytic Activities to Enhance Immunochromatographic Diagnosis

Colorimetric lateral flow immunoassay (LFIA) with gold nanoparticles (AuNPs) as signal reporters has been widely used in point-of-care testing. Nonetheless, the potential of traditional AuNP-based LFIA for the early diagnosis of disease is often compromised by limited sensitivity due to the insufficient colorimetric signal brightness of AuNPs. Herein, we develop a "three-in-one" multifunctional catalytic colorimetric nanohybrid (Fe₃O₄@MOF@Pt) composed of Fe₃O₄ nanoparticles, MIL-100(Fe), and platinum (Pt) nanoparticles. Fe₃O₄@MOF@Pt displays enhanced colorimetric signal brightness, fast magnetic response, and ultrahigh peroxidase-mimicking activity, which are beneficial to the enhancement of the sensitivity of LFIA by coupling with magnetic separation and catalytic amplification. When integrated with the dual-antibody sandwich LFIA platform, the developed Fe₃O₄@MOF@Pt can achieve an ultrasensitive immunochromatographic assay of procalcitonin with a sensitivity of 0.5 pg mL^-1, which is approximately 2280-fold higher than that of conventional AuNP-based LFIA and superior to previously published immunoassays. Therefore, this work suggests that the proposed catalytic colorimetric nanohybrid can act as promising signal reporters to enable ultrasensitive immunochromatographic disease diagnostics.

Magnetic relaxation switching assay based on three-dimensional assembly of Fe3O4@ZIF-8 for detection of cadmium ions

The design and construction of a novel magnetic resonance switch (MRS) sensor for cadmium ion (Cd²⁺) detection is described. Fe₃O₄@ZIF-8 was synthesized through seed-mediated growth of dimercaptosuccinic acid-coated Fe₃O₄. Fe₃O₄@ZIF-8 with high relaxation value (163.086 mM⁻¹ s⁻¹) and large negative zeta potential (−20.69 mV) exhibited good magnetic relaxation performance and water solubility. The successfully synthesized Fe₃O₄@ZIF-8 was used to develop an immune recognition-based MOFs-MRS sensor for highly sensitive detection of Cd²⁺. The proposed MRS detected a wide linear range of Cd²⁺ concentration from 2 to 200 ng mL⁻¹ with a low limit of detection of 0.65 ng mL⁻¹ (S/N = 3), and displayed high selectivity towards matrix interference. The robust sensing system was effective even in a complex sample matrix, enabling the quantitative analysis of Cd²⁺ content in rice samples and drinking water samples with good reliability. Recoveries of Cd²⁺ ranged from 91.50 to 112.05% for spiked drinking water and from 95.86 to 110.45% for spiked rice samples. The versatility of Fe₃O₄@ZIF-8 with customized relaxation responses could allow the adaptation of magnetic resonance platforms for food safety purposes.

A sensitive immune recognition-based MOF-MRS sensor for the detection of Cd²⁺.

Biothiol-Functionalized Cuprous Oxide Sensor for Dual-Mode Sensitive Hg2+ Detection

Hg²⁺ ions are one of the highly poisonous heavy metal ions in the environment, so it is urgent to develop rapid and sensitive detection platforms for detecting Hg²⁺ ions. In this work, a novel electrochemical and photoelectrochemical dual-mode sensor (l-Cys-Cu₂O) was successfully fabricated, and the sensor exhibits a satisfactory detection limit (0.2 and 0.01 nM) for the detection of Hg²⁺, which is far below the dangerous limit of the U.S. Environmental Protection Agency. The linear ranges of dual-mode Hg²⁺ detections were 0.33-3.3 and 0.17-1.33 μM, respectively. Moreover, the sensor shows desirable stability, selectivity, and reproducibility for detecting Hg²⁺ ions. For river water samples, the recoveries of 96.6-101.4% (electrochemical data) and 93.0-105.6% (photoelectrochemical data) were obtained, indicating that the sensor could be successfully applied in the determination of Hg²⁺ ions in environmental water. Therefore, the designed sensor has a potential in the trace-level detection of Hg²⁺ ions.

A magnetic relaxation switch sensor for determination of 17β-estradiol in milk and eggs based on aptamer-functionalized Fe3 O4 @Au nanoparticles

BACKGROUND

A simple and rapid detection method for 17β-estradiol (E₂ ) in complex food matrix is greatly desirable. A magnetic relaxation switch (MRS) sensor for detecting E₂ based on the aptamer-functionalized gold-coated iron oxide (Fe₃ O₄ @Au) nanocomposite was designed in this study. Fe₃ O₄ @Au nanoparticles (NPs) played as a 'switch' between dispersed and aggregated states, while aptamer served as the recognition unit.

RESULTS

According to the sensing effect of monocomponent relaxation time (T_2W ) for E₂ , the volume ratio of aptamers to Fe₃ O₄ @Au, the sodium chloride (NaCl) concentration, the concentration of Fe₃ O₄ @Au@Apt, and reaction time were optimized to be 4:1, 0.03 mol L^-1 , 4 μmol L^-1 and 15 min, respectively. For the analysis of food sample, the E₂ was quantified over a concentration range of 1 to 100 nmol L^-1 with a detection limit of 7.6 nmol L^-1 for milk samples, while a linearity range of 20 to 100 nmol L^-1 and a detection limit of 8.57 nmol L^-1 for egg samples.

CONCLUSION

These results exhibited that the MRS sensor could be a promising platform for the rapid detecting of E₂ in food sample. © 2021 Society of Chemical Industry.

Enzyme-induced multicolor colorimetric and electrochemiluminescence sensor with a smartphone for visual and selective detection of Hg2

In this study, we developed a novel dual-analytical platform for the visual, sensitive, and reliable analysis of mercury ions (Hg²⁺) in environmental water samples. Importantly, thymine (T)-rich DNA probes were utilized to form T-Hg²⁺-T base pairs in the presence of Hg²⁺ to ensure the specificity of the method. We synthesized new luminescent tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride (Ru(dcbpy)₃²⁺)-modified metal-polydopamine frameworks (MPFs@Ru), which were then applied to construct an electrochemiluminescence (ECL) system for the first time, and it achieved accurate and sensitive quantitative detection of Hg²⁺. To achieve rapid on-site determination, a multicolorimetric system based on a smartphone was established by inducing deposition of silver shells on gold nanorods (Au NRs). Under optimized conditions, the dual-modal assay showed an excellent response for Hg²⁺ in the linear range of 2 pmol L^-1 to 500 nmol L^-1, with a low detection limit of 0.32 pmol L^-1. Moreover, the proposed method demonstrated satisfactory selectivity, stability, and acceptable reproducibility for the detection of Hg²⁺. The recovery of lake water samples ranged from 98.53% to 111.97% for the ECL method and from 95.04% to 106.11% for the colorimetric method, indicating the potential applicability of the proposed method for monitoring environmental water samples.

Three-dimensional assembly and disassembly of Fe3O4-decorated porous carbon nanocomposite with enhanced transversal relaxation for magnetic resonance sensing of bisphenol A

The design and construction of a novel magnetic resonance sensor (MRS) is presented for bisphenol A (BPA) detection. The MRS has been built based on the core component of magnetic Fe₃O₄ nanoparticles (~ 40 nm), which were uniformly distributed in nanoporous carbon (abbreviated as Fe₃O₄@NPC). The synthesis was derived from the calcination of the metal organic framework (MOF) precursor of Fe-MIL-101 at high temperature. Fe₃O₄@NPC was confirmed with enhanced transversal relaxation with r₂ value of 118.2 mM^-1 s^-1, which was around 1.7 times higher than that of the naked Fe₃O₄ nanoparticle. This enhancement is attributed to the excellent proton transverse relaxation rate of Fe₃O₄@NPC caused by the reduced self-diffusion coefficient of water molecules in the vicinity of Fe₃O₄ nanoparticles in the nanoporous carbon. BPA antibody (Ab) and antigen (Ag)-ovalbumin (OVA) were immobilized onto the Fe₃O₄@NPC to form Ab-Fe₃O₄@NPC and Ag-Fe₃O₄@NPC, respectively. These two composites can cause the three-dimensional assembly of Fe₃O₄@NPC via immunological recognition. The presence of BPA can compete with antigen-OVA to combine with Ab-Fe₃O₄@NPC, thereby breaking the assembly process (disassembly). The difference in the change of the T₂ value before and after adding BPA can thus be used to monitor BPA. The proposed MRS not only revealed a wide linear range of BPA concentration from 0.05 to 50 ng mL^-1 with an extremely low detection limit of 0.012 ng mL^-1 (S/N = 3), but also displayed high selectivity towards matrix interferences. The recoveries of BPA ranged from 95.6 to 108.4% for spiked tea π, and 93.4 to 104.7% for spiked canned oranges samples, respectively, and the RSD (n = 3) was less than 4.4% for 3 successive assays. The versatility of Fe₃O₄@NPC with customized relaxation responses provides the possibility for the adaptation of magnetic resonance platforms for food safety development. The magnetic Fe3O4 nanoparticles are uniformly dispersed in the nanoporous carbon (Fe3O4@NPC), which derived from the calcinating of the metal organic framework (MOF) precursor of Fe-MIL-101. And the magnetic Fe₃O₄@NPCs are adopted for the construction of magnetic resonance sensor (MRS) for bisphenol A (BPA) detection.

A hybrid nanosensor based on novel fluorescent iron oxide nanoparticles for highly selective determination of Hg2+ ions in environmental samples

Novel fluorescent iron oxide nanoparticles were prepared for the determination of Hg²⁺ in real samples. The fluorescence behaviors of the sensor were examined using absorption and fluorescence (steady-state, time-resolved, 3-D, EEM) spectroscopies.

Label-Free and Sensitive Determination of Cadmium Ions Using a Ti-Modified Co3O4-Based Electrochemical Aptasensor

The current work demonstrates an electrochemical aptasensor for sensitive determination of Cd²⁺ based on the Ti-modified Co₃O₄ nanoparticles. In this unlabeled system, Ti-modified Co₃O₄ nanoparticles act as current signal amplifiers modified on the screen-printed carbon electrode (SPCE) surface, while the derivative aptamer of Cd²⁺ works as a target recognizer. In addition, the sensing is based on the increase in electrochemical probe thionine current signal due to the binding of aptamer to Cd²⁺ via specific recognition. In the current study, key parameters, including aptamer concentration, pH, and incubation time were optimized, respectively, to ensure sensing performance. Cyclic voltammetry was used not only to characterize each preparation and optimization step, but also to profile the bindings of aptamer to Cd²⁺. Under optimal conditions, Cd²⁺ can be determined in a linear range of 0.20 to 15 ng/mL, with a detection limit of 0.49 ng/mL, significantly below the maximum concentration limit set by the U.S. Environmental Protection Agency. Based on comparative analysis and the results of recovery test with real samples, this simple, label-free but highly selective method has considerable potential and thus can be used as an in-situ environmental monitoring platform for Cd²⁺ testing.

A novel sandwich-type SERS immunosensor for selective and sensitive carcinoembryonic antigen (CEA) detection

Monitoring the malignant tumors via cancer biomarkers is very significant process. Nonetheless, the practical clinical applications need selective and sensitive analytical methods/techniques. In this study, a novel sandwich type immunosensor based on surface-enhanced raman scattering (SERS) was presented including 4-mercaptobenzoic acid labeled MoS₂ nanoflowers@Au nanoparticles (MoS₂ NFs@Au NPs/ MBA) as CEASERS tag and Fe₃O₄@Au nanoparticles functionalized delaminated Ti₃C₂T_x MXene (Fe₃O₄ NPs@Au NPs/d-Ti₃C₂T_X MXene) as SERS magnetic supporting substrate for carcinoembryonic antigen (CEA) detection. Especially, the determination of single molecule by using SERS method enables early diagnosis of major diseases. In addition, this technique can be utilized for multiplex analyzes owing to narrow well-resolved peaks. The prepared CEASERS tag and SERS magnetic supporting substrate were characterized by scanning electron microscope (SEM), x-ray diffraction (XRD) method, x-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and fourier transform infrared spectroscopy (FTIR). A linearity of 0.0001-100.0 ng mL^-1 was observed with high sensitivity. Finally, sandwich type immunosensor demonstrated good selectivity and stability for target CEA recognition in plasma sample.

The Use of Aptamers and Molecularly Imprinted Polymers in Biosensors for Environmental Monitoring: A Tale of Two Receptors

Effective molecular recognition remains a major challenge in the development of robust receptors for biosensing applications. Over the last three decades, aptamers and molecularly imprinted polymers (MIPs) have emerged as the receptors of choice for use in biosensors as viable alternatives to natural antibodies, due to their superior stability, comparable binding performance, and lower costs. Although both of these technologies have been developed in parallel, they both suffer from their own unique problems. In this review, we will compare and contrast both types of receptor, with a focus on the area of environmental monitoring. Firstly, we will discuss the strategies and challenges involved in their development. We will also discuss the challenges that are involved in interfacing them with the biosensors. We will then compare and contrast their performance with a focus on their use in the detection of environmental contaminants, namely, antibiotics, pesticides, heavy metals, and pathogens detection. Finally, we will discuss the future direction of these two technologies.