Molecular design strategies of multifunctional probe for simultaneous monitoring of Cu2+, Al3+, Ca2+ and endogenous l-phenylalanine (LPA) recognition in living cells and zebrafishes

Multi-ion detection chemosensor based on rhodamine for turn-on fluorescence sensing and bioimaging of Fe3+, Al3+, Cr3+, and Hg2+ under different channels

A novel rhodamine-based multi-ion fluorescent sensor, RGN, was designed and synthesized for the highly selective detection of mercury ions (Hg2+) in ethanol and water systems, as well as trivalent cations (Fe3+, Al3+, and Cr3+) in acetonitrile and water systems using a two-step Schiff base reaction method. Nuclear magnetic titration experiments and theoretical calculations demonstrated that the sensor achieved the detection of the aforementioned metal ions through the fluorescence turn-on phenomenon induced by lactam ring-opening. Density functional theory (DFT) calculation results showed decreased HOMO-LUMO energy gaps and increased dipole moments, indicating the effective coordination of the sensor with the corresponding metal ions to form more stable complexes, thereby achieving detection objectives. Furthermore, the fluorescence turn-on sensor RGN exhibited relatively low detection limits, with limits of detection (LOD) for Fe3+, Al3+, Cr3+, and Hg2+ being 10.20 nM, 14.66 nM, 58.78 nM, and 73.33 nM, respectively. Finally, practical applications of sensor RGN in environmental water samples, L929 cells, and zebrafish were demonstrated, indicating its potential for detecting and tracking Fe3+, Al3+, Cr3+, and Hg2+ in environmental samples and biological systems, with prospects for biomedical applications in the diagnosis and treatment of heavy metal ion-induced diseases.

Preparation and mechanism study of hydrogen bond induced enhanced composited gelatin microsphere probe

Fluorescent probes offer rapid and efficient detection of metal ions. However, their properties, including high biotoxicity and low detection limits, often limit their utility in biological systems. In this study, we used a microfluidic approach to fabricate photocrosslinked gelatin microspheres with a micropore, providing a straightforward method for loading fluorescent probes into these microspheres based on the adsorption effect and hydrogen bonding interaction. The gelatin microsphere loaded probes, GelMA/TPA-DAP and GelMA/TPA-ISO-HNO were designed and obtained. The results show that these probes exhibit obviously low biotoxicity compared to the original molecular probes TPA-DAP and TPA-ISO-HNO. Simultaneously, it is found that GelMA/TPA-DAP and GelMA/TPA-ISO-HNO have better detection sensitivity, the detection limits are 35.4 nM for Cu2+, 16.5 nM for Co2+ and 20.5 nM for Ni2+ for GelMA/TPA-DAP probe. Compared to the original TPA-DAP they are improved by 37.2 %, 26.3 % and 22.6 % respectively. The corresponding coordination constants were 10.8 × 105, 4.11×105 and 6.04×105, which is larger than homologous TPA-DAP. Similar results were also verified in the GelMA/TPA-ISO-HNO probe. The mechanism was investigated in detail by theoretical simulations and advanced spectral analysis. The density functional theory (DFT) simulations show that the probes are anchored inside the microspheres and the molecular structure is modified due to the hydrogen bonding interaction between the microsphere and the molecular probe, which makes GelMA/TPA-DAP exhibit stronger coordination capacity with metal ions than homologous TPA-DAP. In addition, the adsorption effect also provided some synergistic enhancement contribution. Meanwhile, cellular experiments have also shown that the composite microspheres can improve the biocompatibility of the probe and will provide a wider range of applications towards bioassay. This simple and effective method will provide a convenient way to improve the performance of fluorescent probes and their biological applications.

A novel polyhedral oligomeric silsesquioxane nanohybrid fluorescent sensor designed based on an osmotic mechanism for specific detection and intelligent scavenging of magnesium ions

BACKGROUND

Mg2+ has long been recognized as one of the most vital cations due to its diverse physiological and pathological roles, making it indispensable in both biomedical and biological research. Organic fluorescent sensors are commonly employed for Mg2+ detection, but they often lack high selectivity and exhibit poor hydrophilicity, limiting their biomedical applications.

RESULTS

Herein, we introduced a novel organic-inorganic hybrid fluorescence sensor, PFHBS, constructed on the POSS nanoplatforms. The efficient connection between PEGylated POSS and the small molecule sensor FHBS through Click chemistry enhances the selectivity and reduces interference, making this chemical sensor ideal for the accurate detection of Mg2+. Furthermore, the incorporation of POSS amplifies the ligand field effect of FHBS, making it more conducive to Mg2+ capture. The modification of PEG chains enhances the sensor's amphiphilicity, facilitating efficient cell penetration and effective Mg2+ detection at the biological level.

SIGNIFICANCE

Finally, relying on spontaneous permeation, coupled with its strong ligand field effect and excellent cell permeability, the chemosensor demonstrates the capability to intelligently remove excess Mg2+ from the body. It has been successfully applied to mitigate renal overload resulting from acute Mg2+ poisoning.

A new Fe3+-selective, sensitive, and dual-channel turn-on probe based on rhodamine carrying thiophenecarboxaldehyde: Smartphone application and imaging in living cells

A new dual-channel probe based on rhodamine B derivative (MSB) was successfully designed, synthesized, characterized by Nuclear Magnetic Resonance (NMR) Spectroscopy, Fourier Transform Infrared Spectrophotometer (FTIR), Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS), X-ray Photoelectron Spectroscopy (XPS), and Single Crystal X-rayDiffraction, and the sensing abilities toward Fe³⁺ cation have been demonstrated and the probe was successfully utilized for fluorescence imaging of Fe³⁺ in living cells. The probe demonstrated quite fast, sensitive, and selective response to Fe³⁺ by causing an extreme enhancement in UV-vis and fluorescence spectroscopy techniques in the buffered aqueous media which makes MSB a dual-channel probe. While the color of MSB solution was initially light yellow, it turned pink in the presence of Fe³⁺, which provided highly selective naked-eye determination among several ions as alkaline, alkaline-earth, and transition metal ions. After that, the probe was easily applied to paper strips and real samples such as drinking waters and supplementary iron tablets for sensing Fe³⁺ in an aqueous solution. The detection limit (LOD) and the response time of the probe were determined as 4.85x10^-9 M and 4 min, respectively, which are quite lower compared with other rhodamine based Fe³⁺ sensors in the literature. According to Job's plot, ¹H NMR titration, MALDI-TOF MS, XPS, and DFT study techniques, the complexation ratio between MSB and Fe³⁺ was found as 1:1. Moreover, the spectral response was reversible with alternately addition of Fe³⁺ or Na₂EDTA to the MSB solution. In addition, fluorescence imaging in NIH/3T3 mouse fibroblast cells and studies in real samples with a quite high recovery rate exhibited that the probe is qualified for detection of Fe³⁺ ion with multiple practical usages.

Synthesis of a novel triphenylamine-based multifunctional fluorescent probe for continuous recognition application

In this paper, a novel fluorescent probe, TPA-PAT, with continuous recognition based on triphenylamine was designed, synthesized, and characterized by NMR, IR, and fluorescence spectrophotometry techniques.

A dual-functional colorimetric and fluorescent peptide-based probe for sequential detection of Cu2+ and S2- in 100% aqueous buffered solutions and living cells

Highly sensitive and selectivite detection of copper ions (Cu²⁺) and hydrogen sulfide (H₂S) have become important research topics due to the potential harmful impacts of these chemicals to human health and the environment. In this study, we report the synthesis of a dual-functional peptide-based probe L (FITC-AhxSerSerHis), designed to mimic a copper-sulfur metalloprotein, and capable of continuous detection of Cu²⁺ and S^2- based on colorimetric and fluorescent methods. The new probe L displayed excellent "turn off" fluorescence response and good selectivity for Cu²⁺ ions via a modification of the tripeptide and fluorescein isothiocyanate group, and produced an obvious color change visible to the naked eye. Furthermore, as an excitable probe, the L-Cu complex could continuously detect S^2- with high selectivity and sensitivity in 100% aqueous buffered solutions. The detection limits for fluorescence titration measurements, calculated using the equation 3σ/k, were 76.7 nM (Cu²⁺) and 27.2 nM (S^2-), which were well below U.S. EPA safety levels. In addition, L could be cycled to alternately detect Cu²⁺ and S^2-, thereby making it a promising reversible probe. Moreover, L was successfully applied to monitoring Cu²⁺ and S^2- in live RKO cells through fluorescence imaging, exhibiting low cytotoxicity and good cell permeability.

Quantum dots encoded white-emitting polymeric superparticles for simultaneous detection of multiple heavy metal ions

Simultaneous detection of multiple heavy metal ions (HMI) is of great importance for the environmental monitoring, and the analytical tools based on multiband emissive fluorescent probes have been regarded as one of the most promising candidate for multiple HMI detection. Herein, the rod-coil amphiphilic block copolymer (BCP) with intrinsic blue fluorescence emission has been synthesized and subsequently employed to encapsulate two types of hydrophobic quantum dots (QD) with green and red fluorescence emission via the three dimensionally confined emulsion self-assembly, leading to the generation of white-emitting superparticles showing good colloidal stability and stable aqueous phase fluorescence. Furthermore, it was found that the fluorescence emission intensity of obtained superparticles can be selectively quenched by Ag⁺, Hg²⁺, Cu²⁺ and Fe³⁺ ions via different mechanisms, and the four metal ions can be further discriminated according to their distinct combinational quenching effects onto three fluorescent bands of white-emitting superparticles. In addition, an analytical model was built to enable the simultaneous detection of Cu²⁺, Hg²⁺ and Fe³⁺ in the real sample. Basically, the current work opens the new way to fabricate fluorescent probes with multiple emission bands, which can be easily adapted to prepare more complicated QD encoded fluorescent probes for high throughput detection.

Monodisperse functionalized GO for high-performance sensing and bioimaging of Cu2+ through synergistic enhancement effect

The metal ion fluorescence probes based on chemical reactions triggered by specific metal ions is characterized by high selectivity. However, they are also subject to inherent limitations, such as easy aggregation under water solution, poor optical stability, and long response time. In order to solve these problems, a simple and effective method was studied. The specific design is as follows. Fluorescence probe RACD is assembled onto a single layer graphene oxide (GO) via π-π interaction and hydrogen bonding to prepare RACD functionlized graphene oxide RACD/GO. The experimental results show that the resulting RACD/GO possesses very well monodispersion, hydrophilicity and photostability, particularly reduce the aggregation degree of RACD owing to π-π effect. Simultaneously, it was found that due to the strong synergy between GO and RACD, the response time, selectivity, anti-interference ability, detection sensitivity, detection limit and bioimaging ability of RACD/GO were significantly improved compared with RACD. The resulting RACD/GO not only possesses very well photostability, multiple repeated cycles, but also have been triumphantly put into the monitoring Cu²⁺ of environmental water, sewage, cells and zebrafish specimens in practice. The detection limit is as low as 1.76 nM, and the correlation coefficient is 0.9998.