L-cysteine reduced/functionalized graphene oxide application as a smart/control release nanocarrier of sustainable cerium ions for epoxy coating anti-corrosion properties improvement

Anaerobic reduction of graphene oxide induces the release of sorbed organic contaminants and enhances environmental risk

Graphene oxide (GO) is an oxidized form of graphene-based materials with abundant hydrophilic oxygen-containing functional groups, forming well-dispersed suspensions and serving as pollution carriers. The natural anaerobic environment might alter the sorption behavior of GO, which in turn affects the fate and bioavailability of GO-sorbed organic contaminants. In this study, GO can be reduced by diverse environmental reductants, including sodium sulfide, DL-1,4-dithiothretiol, and L-cysteine, forming aggregates. Meanwhile, the GO-sorbed organic contaminants were released during the reduction process owing to the decreasing oxygen content and sorption sites. The effect of solution chemistry conditions (dissolved humic acid/HA and ionic strength) on the reduction release process was also investigated. HA reduced the release rate of organic contaminants due to its stabilization effect. Adding NaCl did not alter the release rate, while CaCl2 markedly enhanced the release rate. Toxicity tests with Bacillus subtilis indicated that releasing the pre-sorbed organic compound on GO led to a lower survival ratio and enhanced the superoxide dismutase activity. The findings of this study imply that the anaerobic environment could alter the dispersion/aggregation status of GO, affecting the sorption interaction between GO and the organic compounds and consequently influencing the toxicity and risk of pollution in the environment.

Advanced materials for smart protective coatings: Unleashing the potential of metal/covalent organic frameworks, 2D nanomaterials and carbonaceous structures

The detrimental impact of corrosion on metallic materials remains a pressing concern across industries. Recently, intelligent anti-corrosive coatings for safeguarding metal infrastructures have garnered significant interest. These coatings are equipped with micro/nano carriers that store corrosion inhibitors and release them when triggered by external stimuli. These advanced coatings have the capability to elevate the electrochemical impedance values of steel by 2-3 orders of magnitude compared to the blank coating. However, achieving intelligent, durable, and reliable anti-corrosive coatings requires careful consideration in the design of these micro/nano carriers. This review paper primarily focuses on investigating the corrosion inhibition mechanism of various nano/micro carriers/barriers and identifying the challenges associated with using them for achieving desired properties in anti-corrosive coatings. Furthermore, the fundamental aspects required for nano/micro carriers, including compatibility with the coating matrix, high specific surface area, stability in different environments, stimuli-responsive behavior, and facile synthesis were investigated. To achieve this aim, we explored the properties of micro/nanocarriers based on oxide nanoparticles, carbonaceous and two-dimensional (2D) nanomaterials. Finally, we reviewed recent literature on the application of state-of the art nanocarriers based on metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). We believe that the outcomes of this review paper offer valuable insights for researchers in selecting appropriate materials that can effectively enhance the corrosion resistance of coatings.

Insight into the Corrosion Inhibition Mechanism of Sodium Silicate on the Magnesium Alloy Surface: Experimental and Theoretical Calculations

The corrosion inhibition mechanism of sodium silicate (SS) for WE43 magnesium alloy in NaCl solution was investigated by in situ observation, electron probe microanalysis (EPMA), electrochemical test, and theoretical calculations. In situ observation showed that local corrosion was markedly inhibited after the addition of the SS inhibitor. Electrochemical data revealed that a protective layer was formed on the metal/solution interface and an optimum inhibition efficiency of 98.3% in the case of 2.5 g/L SS. A uniform magnesium silicate layer with a thickness of ∼2 μm formed on the uncorroded area was confirmed. Quantum chemical calculations revealed that SiO32- could absorb on the MgO (1 0 0) surface in a parallel orientation through the coordinate bonds between the O and Mg atoms. The distances of Mg-O bonds are 2.052 and 2.249 Å, suggesting that they are coordinated. The adsorption/interaction mechanisms of SiO32- were also analyzed through charge density distribution and atomic densities. Molecular dynamics simulations further confirmed that a uniform SiO32- layer was absorbed on the MgO surface. In the local corroded area, free SiO32- would react with Mg2+ and OH- produced by corrosion to form the insoluble magnesium silicate compound, which hindered the spread of corrosion.

A non-heat-source process for preparing graphene oxide with low energy consumption

As the most widely used method for preparing graphene oxide (GO), Hummers' method always involves a key step, that is adding water to concentrated sulfuric acid. We found that if this process is cancelled, the oxidation degree of GO will be significantly reduced. This means that the heat released during concentrated sulfuric acid dilution will promote further oxidation of GO. In this paper, we fully utilize the heat released during concentrated sulfuric acid dilution to develop a new non-heat-source process without any low-/high-temperature auxiliar, exponentially reducing the energy consumption and largely avoiding the frequent temperature control. The result shows that GO prepared by Hummers' method and that prepared by the proposed process show a similar structure, composition, morphology, and defect degree. Meanwhile, the corresponding reduced GO (rGO) obtained after reduction shows similar capacitive behavior. Their specific capacitances are 243.6 F g^-1 and 240.3 F g^-1 at 1 A g^-1, respectively, and they both have a long-term cycling performance (with a 100% capacitance retention after 10 000 cycles at 30 A g^-1). This study provides a new strategy for the preparation of GO with low energy consumption.

Design of Nacre-Inspired 2D-MoS2 Nanosheets Assembled with Mesoporous Covalent Organic Frameworks (COFs) for Smart Coatings

High loading capacity and smart release of inhibitors are the first and foremost characteristics of nanocontainers, which play a pivotal role in metal active corrosion protection. The present work explores the development of novel protective nanocontainers based on recently emerged covalent organic frameworks (COFs). These highly porous frameworks with large surface area, outstanding thermomechanical properties, low density, and ease of functionalization are used as nanocontainers. On the other hand, molybdenum disulfide (MoS₂), a state-of-the-art 2D layered compound with a sheetlike structure, was utilized thanks to its excellent barrier properties. However, these lamellar structures suffer a high agglomeration tendency in polymeric matrices. Therefore, we developed a novel hybrid nanocontainer, inspired by natural nacre, by an in situ growth of COF on MoS₂ to improve the stability and provide a high inhibitor loading capacity. The porous and nitrogen-rich structure of COF made it a good carrier to adsorb europium cations as inorganic inhibitors and release them on demand by pH changes to suppress the electrochemical reactions. The as-synthesized nanoplatforms were used as pH-responsive fillers in the epoxy resin. The nanocomposite coatings showed almost 50 kΩ cm² total resistance and high impedance values (10¹¹ Ω cm²) even after 77 days of immersion. Moreover, salt spray analysis depicted the smallest amount of rust and corrosion product after 31 days in the filled nanocomposite coating. Cathodic delamination and pull-off outcomes denoted that the filled coatings with the as-synthesized nanofiller showed the smallest cathodic delamination radius (3.41 mm) and lowest adhesion loss (24%) compared to the neat epoxy (7.55 mm and 46.7%). As such, the highly porous modified MoS₂ nanosheets are considered promising alternatives in a wide range of applications with anticorrosion properties.

Rising of MXenes: Novel 2D-functionalized nanomaterials as a new milestone in corrosion science - a critical review

Corrosion is a natural process between a metal and its environment that can gradually cause catastrophic damage to the metal equipment, which would have economic implications. Consequently, several protective methods have been utilized to prevent metals from severe degradation. Organic polymeric coatings have been widely used as the most convenient and cost-effective method to boost metals' anti-corrosion properties. Nonetheless, these coatings have a significant amount of solvent, resulting in shrinkage and micro defects in the films during the curing process. Many studies have verified that transition metal carbides/nitrides (MXenes) can form a "labyrinth effect" in the polymeric coatings due to their "nano-barrier effect". Furthermore, based on their sheet-like structures, they can considerably cover the surface defects of the polymeric films. Therefore, the penetration of corrosive elements can be substantially curbed. It is the first review that specifically focused on the new family of 2D nanomaterials, i.e., MXenes, and discussed their applications in corrosion protection systems. The MXenes' pros and cons in the polymeric matrixes as nanofillers will be clarified. Moreover, the synthesis and functionalization methods of the MXenes, their applications, and corrosion protection mechanism will be explored. Subsequently, the MXenes' superiority over other 2D nanomaterials will be highlighted while their future perspectives and industrial applications will be predicted.

L-Cysteine functionalized graphene oxide nanoarchitectonics: A metal-free Hg2+ nanosensor with peroxidase-like activity boosted by competitive adsorption

Developing non-noble metal, even metal-free chemical sensors for the detection of toxic heavy metal ions is significantly desirable for economically and environmentally sustainable application but has heretofore remained elusive. Herein, a _L-cysteine functionalized graphene oxide nanosheet (CGO) nanoarchitectonics, greenly synthesized by a very simple method at room temperature, was utilized to realize the simultaneous enrichment and colorimetric detection of trace mercury ions (Hg²⁺). It was discovered that CGO, as a nanozyme mimic exhibited greatly enhanced peroxidase-like catalytic activity than the pristine graphene oxide. By exploring the interactions of CGO nanozyme with colorimetric substrate, 3,3',5,5'-tetramethylbenzidine (TMB) and target Hg²⁺ ions, we found that the sensing principle was based mainly on the competitive adsorption between Hg²⁺ ions and TMB over CGO. The pre-capture of Hg²⁺ ions hindered the TMB binding on CGO, resulting in the promoted oxidation of TMB by H₂O₂ to produce more colored oxidation products, from which the colorimetric sensing of Hg²⁺ was realized with a good detection effect on 5 μg L^-1 solution. As an enrichment-sensing integration platform, this metal-free sensor is cost-effective and sensitive, and presents considerable anti-interference ability over other metal ions. Overall, this work not only expands the application of graphene-based materials in colorimetric detection but also provides a general sensing principle to construct highly sensitive sensors.

Elimination of amoxicillin using zeolite Y-sea salt as a good catalyst for activation of hydrogen peroxide: Investigating degradation pathway and the effect of wastewater chemistry

The sea contains elements that can play a useful role in catalyzing reactions. Therefore, this research was done to focus on eliminating amoxicillin (AMX) from wastewater utilizing zeolite Y- sea salt catalyst in the presence of H₂O₂. The influences of furnace temperature (200-500 °C) and time duration in the furnace (1-4 h) were optimized during catalyst generation. Also, the effects of different parameters on AMX removal, such as pH (5.0-9.0), catalyst dose (0-10 g.L^-1), AMX concentration (50-300 mg.L^-1), contact time (10-130 min), and H₂O₂ concentration (0-6 mL/100 mL distilled water) were investigated. Different analyses like Brunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were conducted to reveal catalyst properties. The BET-specific surface area of the catalyst (12.69 m²g^-1) insignificantly (p-value > 0.05) changed after AMX removal (13.04 m²g^-1), indicating the strength of the prepared catalyst. The active groups of N-H, O-H-O, O-Si-O, C-H, Si-O-Si, and Si-O-Al were determined in the catalyst structure. The highest removal of AMX (93%) was achieved in the zeolite-sea salt/H₂O₂ system at a pH level of 6.0 and an H₂O₂ concentration of 0.1 mL/100 mL. Elimination of the AMX followed pseudo-first-order kinetics. The catalyst was reclaimed up to 7 times and the removal efficiency was suitable up to the fifth stage. The by-products and reaction pathways were investigated by gas chromatography-mass spectrometry (GC-MS). The results showed that zeolite-sea salt can be utilized as an H₂O₂ activator for the effective degradation of AMX from wastewater.

Phenol removal kinetics from synthetic wastewater by activation of persulfate using a catalyst generated from shipping ports sludge

Disposal sludges from shipping docks contain elements that have the potential to catalyze the desired treatment process. The current work was designed to decompose phenol from wastewater by activation peroxymonosulfate (PMS) using a catalyst made from sea sediments (at 400 °C for 3 h). The catalyst had a crystalline form and contained metal oxides. The parameters of pH (3-9), catalyst dose (0-80 mg/L), phenol concentration (50-250 mg/L), and PMS dose (0-250 mg/L) were tested to specify the favorable phenol removal. The phenol removal of 99% in the waste sludge catalyst/PMS system was achieved at pH 5, catalyst quantity of 30 mg/L, phenol content of 50 mg/L, PMS dose of 150 mg/L, and reaction time of 150 min. From the results, it was implied that the pH factor was more important in removing phenol with the studied system than other factors. By-products and phenol decomposition pathways were also provided. The results showed that the sea sediment catalyst/PMS system is a vital alternative for removing phenol from wastewater medium.

Removal of amoxicillin from wastewater in the presence of H2O2 using modified zeolite Y- MgO catalyst: An optimization study

In this paper, Zeolite-MgO was generated using alkali-thermal method and was utilized as a catalyst to decrease amoxicillin (AMX) concentration in the presence of H₂O₂ from wastewater. Different tests like Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy-energy dispersive X-ray analysis (FESEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were done to determine catalyst properties. Active groups of C-S-C, CO, CC, C-N, C-O, N-O, and N-H were identified in catalyst frame. According to XRD results, lower crystallinity of nanoparticles after modification of zeolite by MgO can lead to improvement of AMX removal. Active surface of zeolite (2.32 m²/g) was increased after optimization by MgO to 2.96 m²/g, indicating an increase in the catalyst capacity for activation of H₂O₂. In addition, furnace temperature (200-500 °C), residence time in the furnace (1-4 h), and Mg(NO₃)₂: zeolite ratio (0.25: 2, 0.5:2, 1:2 w/w) were studied to achieve the optimized catalyst for AMX removal. Different parameters like pH (5-9), H₂O₂ concentration (0-6 mL/100 mL), dose of catalyst (0-10 g/L), AMX concentration (50-300 mg/L), and reaction time (10-130 min) were also studied. The best efficiency (97.9%) of AMX removal was achieved at acidic pH with the lowest amount of H₂O₂ (0.1 mL/100 mL) and 7 g/L of catalyst. AMX removal using the developed process followed pseudo-first-order kinetics. Reclaimable Zeolite-MgO catalyst can be effectively utilized in wastewater works.

Synthesis of graphene oxide nanosheets decorated by nanoporous zeolite-imidazole (ZIF-67) based metal-organic framework with controlled-release corrosion inhibitor performance: Experimental and detailed DFT-D theoretical explorations

For the first time, the zeolite-imidazole (ZIF-67) framework, a new subfamily of metal-organic frameworks (MOFs), is synthesized on the graphene oxide (GO) platform. Co²⁺ (as a central atom) and 2-methylimidazole (as organic ligands) were assembled to fabricate ZIF-67/GO NPs for providing epoxy-based anti-corrosion coatings with both active (self-healing) and passive (barrier) performance. Also, the ZIF-67/GO NPs were modified by 3-Aminopropyl triethoxysilane (APS) to improve the particles compatibility with the epoxy matrix and control their solubility in saline media. The FE-SEM, FT-IR, UV-Vis, Raman, TGA, and low-angle XRD techniques were used to prove the successful ZIF-67 particles growth onto the GO platforms. Tafel (potentiodynamic) polarization test demonstrated that the ZIF-67/GO@APS NPs could protect the surface of steel through mixed anodic/cathodic type (O₂ reduction/Fe oxidation) mechanisms and the corrosion current density of the iron sample decreased to 1.41 µA·cm^-2. Interestingly, the epoxy coatings containing ZIF-67/GO and ZIF-67/GO@APS particles revealed long-term corrosion protection durability and outstanding self-healing anti-corrosion performance, which were well studied via EIS, salt spray, cathodic delamination, and pull-off techniques. The impedance value at the lowest frequency for the coating containing ZIF-67/GO@APS after 50 days decreased from 10.7 Ω·cm² to 10.2 Ω·cm² that showed the lowest reduction among the studied samples.