Environmental Distribution of Styrene Oligomers (SOs) Coupled with Their Source Characteristics: Tracing the Origin of SOs in the Environment

Surface plasmon field enhanced upconversion luminescence for the screening and detection of phenolic environmental estrogens

The endocrine system's interference caused by environmental estrogens (EEs) residue in food is a topic of public concern. Here, we construct an aptasensor for the sensitive detection of EEs based on luminescence resonance energy transfer (LRET). With MoS₂ nanosheets acting as the energy acceptor and upconversion luminescence nanoparticles@gold nanoparticles (UCNPs@Au) as the luminescence donor, autofluorescence from food is prevented from interfering. The in-situ deposition of AuNPs not only induces local field enhancement to significantly increase the luminescence intensity of UCNPs, but also conduces to the modification of aptamer through Au-S bond. This aptasensor can respond to multiple estrogens thanks to the choice of a universal aptamer that recognizes phenolic hydroxyl group, and it offers the probability to screen unidentified phenolic estrogens. This method has a high sensitivity and a low limit of detection (LOD), and the satisfactory recovery rates acquired from water and milk samples confirmed its considerable application value.

Optimization of Polystyrene Biodegradation by Bacillus cereus and Pseudomonas alcaligenes Using Full Factorial Design

Microplastics (MP) are a global environmental problem because they persist in the environment for long periods of time and negatively impact aquatic organisms. Possible solutions for removing MP from the environment include biological processes such as bioremediation, which uses microorganisms to remove contaminants. This study investigated the biodegradation of polystyrene (PS) by two bacteria, Bacillus cereus and Pseudomonas alcaligenes, isolated from environmental samples in which MPs particles were present. First, determining significant factors affecting the biodegradation of MP-PS was conducted using the Taguchi design. Then, according to preliminary experiments, the optimal conditions for biodegradation were determined by a full factorial design (main experiments). The RSM methodology was applied, and statistical analysis of the obtained models was performed to analyze the influence of the studied factors. The most important factors for MP-PS biodegradation by Bacillus cereus were agitation speed, concentration, and size of PS, while agitation speed, size of PS, and optical density influenced the process by Pseudomonas alcaligenes. However, the optimal conditions for biodegradation of MP-PS by Bacillus cereus were achieved at γ_MP = 66.20, MP size = 413.29, and agitation speed = 100.45. The best conditions for MP-PS biodegradation by Pseudomonas alcaligenes were 161.08, 334.73, and 0.35, as agitation speed, MP size, and OD, respectively. In order to get a better insight into the process, the following analyzes were carried out. Changes in CFU, TOC, and TIC concentrations were observed during the biodegradation process. The increase in TOC values was explained by the detection of released additives from PS particles by LC-MS analysis. At the end of the process, the toxicity of the filtrate was determined, and the surface area of the particles was characterized by FTIR-ATR spectroscopy. Ecotoxicity results showed that the filtrate was toxic, indicating the presence of decomposition by-products. In both FTIR spectra, a characteristic weak peak at 1715 cm⁻¹ was detected, indicating the formation of carbonyl groups (−C=O), confirming that a biodegradation process had taken place.

Polymeric membranes for environmental remediation: A product space model perspective

The development of polymeric membranes from polymers such as polystyrene (PS), polyvinylchloride (PVC), and their associated family has brought great momentum to the environmental remediation universe, mainly due to their surprisingly diverse and multi-purpose nature. Their usage has surged 20 times in the last half-century and is likely to double again in the coming 20 years. As a result, the polymeric materials economy and commercialization of research become increasingly important as a possible option for a country to boost prosperity while decreasing its reliance on limited raw resources and mitigating negative externalities. This transformation demands a systematic strategy, which involves progress beyond improving the existing models and building new avenues for collaboration. In this work, a sophisticated system, i.e., product space model (PSM), has been presented, explicitly appraising the opportunity space for United Kingdom, Italy, Poland, India, Canada, Indonesia, Brazil, Saudi Arabia, Russia and Colombia for their potential future industrialization and commercialization of polymeric membranes for environmental remediation. The results revealed that UK, Italy, Poland and India are at advantageous positions owing to their close proximity of (distance<2) and their placement in Parsimonious policy, which is the most desired quadrant of Policy Map of PSM, Canada and Indonesia have medium level opportunities, while Russia and Saudi Arabia have opportunities with more challenges to fully exploit the unexploited polymers products in terms of membranes for environmental remediation and prove favorable for export diversification, sustainable economic growth, and commercialization.

Spatial distribution and source identification of traditional and emerging persistent toxic substances in the offshore sediment of South Korea

While the coastal pollution of persistent toxic substances (PTSs) has been widely documented, information on offshore environments remains limited. Here, we investigated the spatial distribution and sources of PTSs in the offshore sediments (n = 34) of South Korea. Sediment samples collected from the Yellow Sea (n = 18), the South Sea (n = 10), and the East Sea (n = 6), in 2017-18 were analyzed for a total of 71 PTSs. Target compounds include 31 PCBs, 15 PAHs, 9 emerging PAHs (e-PAHs), 10 styrene oligomers (SOs), and 6 alkylphenols (APs). Sedimentary PCBs showed relatively low concentrations with no significant difference across the three seas (0.16-6.9 ng g^-1 normalized organic carbon, OC). Low-chlorinated PCBs (tri- and tetra Cl-CBs) were predominant (mean: 77%), primarily indicating atmospheric inputs. PAHs widely accumulated in the three seas with low to moderate level (22-250 ng g^-1 OC), and dominated by high molecular weight PAHs (4-6 rings). PMF analysis revealed coast-specific PAHs sources; i.e., originated from mainly coke production (77%) in the Yellow Sea, vehicle emissions (68%) in the South Sea, and fossil fuel combustion (49%) in the East Sea. SOs showed significant contamination than other PTSs, with elevated concentrations in the Yellow Sea (mean: 350 ng g^-1 OC). APs showed a similar regional distribution to SOs, but concentrations were much lower (mean: 17 ng g^-1 OC). SOs and APs seemed to be introduced from rivers and estuaries on the west coast of Korea, where industrial and municipal activities are concentrated, then might be transported to offshore through tide or currents. Overall, the novel data presented for various PTSs in offshore Korean sediments warrant the necessity of a long-term monitoring effort and urgent management practice to protect marine ecosystem.

Leaching and extraction of additives from plastic pollution to inform environmental risk: A multidisciplinary review of analytical approaches

Plastic pollution is prevalent worldwide and has been highlighted as an issue of global concern due to its harmful impacts on wildlife. The extent and mechanism by which plastic pollution effects organisms is poorly understood, especially for microplastics. One proposed mechanism by which plastics may exert a harmful effect is through the leaching of additives. To determine the risk to wildlife, the chemical identity and exposure to additives must be established. However, there are few reports with disparate experimental approaches. In contrast, a breadth of knowledge on additive release from plastics is held within the food, pharmaceutical and medical, construction, and waste management industries. This includes standardised methods to perform migration, extraction, and leaching studies. This review provides an overview of the approaches and methods used to characterise additives and their leaching behaviour from plastic pollution. The limitations of these methods are highlighted and compared with industry standardised approaches. Furthermore, an overview of the analytical strategies for the identification and quantification of additives is presented. This work provides a basis for refining current leaching approaches and analytical methods with a view towards understanding the risk of plastic pollution.

Global distribution of two polystyrene-derived contaminants in the marine environment: A review

Plastic pollution is one of the major issues impacting on the marine environment. Plastic polymers are known to leach industrial chemicals and associated contaminants. In this review, we focused on assessing the global distribution and concentration of two polystyrene-derived contaminants, hexabromocyclododecanes (HBCDs) and styrene oligomers (SOs), in marine sediments and seawater. Overall, most of the studies were carried out in Asia, North America, and Europe. Relatively high concentrations of these contaminants are generally attributed to the proximity of urban cities, plastic industries, polystyrene pollution, and aquaculture. Moreover, the concentrations in sediments are many times higher than in seawater. HBCDs were found to be a negligible risk to marine biota when compared to the ecotoxicological endpoints. However, realistic concentrations of SOs could compromise the wellbeing of certain species in highly polluted sites. The future perspectives and research were discussed.

Current contamination status of traditional and emerging persistent toxic substances in the sediments of Ulsan Bay, South Korea

Contamination status of traditional and emerging persistent toxic substances (PTSs) in sediments and their major sources were investigated in Ulsan Bay, Korea. A total of 47 PTSs, including 15 traditional PAHs, ten styrene oligomers (SOs), six alkylphenols (APs), and 16 emerging PAHs (E-PAHs) were analyzed. Concentrations of traditional PAHs, SOs, and APs ranged from 35 to 1300 ng g^-1 dry weight (dw), 30 to 3800 ng g^-1 dw, and 30 to 430 ng g^-1 dw, respectively. For the last 20 years, PTSs contamination in the bay area has been improved. However, 12 E-PAHs were widely detected in sediments, with a maximum of 240 ng g^-1 dw (for benzo[e]pyrene) at the creek site. These E-PAHs seemed to originate from surrounding activities, such as biomass combustion, mobile sources, and diesel combustion. Due to environmental concerns for E-PAHs, further research on the potential toxicity, distribution, and behavior of these compounds should be implemented.