Testing the efficacy of broad-acting sorbents for environmental mixtures using isothermal analysis, mammalian cells, and H. vulgaris

Using L. minor and C. elegans to assess the ecotoxicity of real-life contaminated soil samples and their remediation by clay- and carbon-based sorbents

Toxic substances, such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals, can accumulate in soil, posing a risk to human health and the environment. To reduce the risk of exposure, rapid identification and remediation of potentially hazardous soils is necessary. Adsorption of contaminants by activated carbons and clay materials is commonly utilized to decrease the bioavailability of chemicals in soil and environmental toxicity in vitro, and this study aims to determine their efficacy in real-life soil samples. Two ecotoxicological models (Lemna minor and Caenorhabditis elegans) were used to test residential soil samples, known to contain an average of 5.3, 262, and 9.6 ppm of PAHs, lead, and mercury, for potential toxicity. Toxicity testing of these soils indicated that 86% and 58% of soils caused ≤50% inhibition of growth and survival of L. minor and C. elegans, respectively. Importantly, 3 soil samples caused ≥90% inhibition of growth in both models, and the toxicity was positively correlated with levels of heavy metals. These toxic soil samples were prioritized for remediation using activated carbon and SM-Tyrosine sorbents, which have been shown to immobilize PAHs and heavy metals, respectively. The inclusion of low levels of SM-Tyrosine protected the growth and survival of L. minor and C. elegans by 83% and 78%, respectively from the polluted soil samples while activated carbon offered no significant protection. These results also indicated that heavy metals were the driver of toxicity in the samples. Results from this study demonstrate that adsorption technologies are effective strategies for remediating complex, real-life soil samples contaminated with hazardous pollutants and protecting natural soil and groundwater resources and habitats. The results highlight the applicability of these ecotoxicological models as rapid screening tools for monitoring soil quality and verifying the efficacy of remediation practices.

Toxicity of representative organophosphate, organochlorine, phenylurea, dinitroaniline, carbamate, and viologen pesticides to the growth and survival of H. vulgaris, L. minor, and C. elegans

Pesticides are commonly found in the environment and pose a risk to target and non-target species; therefore, employing a set of bioassays to rapidly assess the toxicity of these chemicals to diverse species is crucial. The toxicity of nine individual pesticides from organophosphate, organochlorine, phenylurea, dinitroaniline, carbamate, and viologen chemical classes and a mixture of all the compounds were tested in three bioassays (Hydra vulgaris, Lemna minor, and Caenorhabditis elegans) that represent plant, aquatic, and soil-dwelling species, respectively. Multiple endpoints related to growth and survival were measured for each model, and EC10 and EC50 values were derived for each endpoint to identify sensitivity patterns according to chemical classes and target organisms. L. minor had the lowest EC10 and EC50 values for seven and five of the individual pesticides, respectively. L. minor was also one to two orders of magnitude more sensitive to the mixture compared to H. vulgaris and C. elegans, where EC50 values were calculated to be 0.00042, 0.0014, and 0.038 mM, respectively. H. vulgaris was the most sensitive species to the remaining individual pesticides, and C. elegans consistently ranked the least sensitive to all tested compounds. When comparing the EC50 values across all pesticides, the endpoints of L. minor were correlated with each other while the endpoints measured in H. vulgaris and C. elegans were clustered together. While there was no apparent relationship between the chemical class of pesticide and toxicity, the compounds were more closely clustered based on target organisms (herbicide vs insecticide). The results of this study demonstrate that the combination of these plant, soil, and aquatic specie can serve as representative indicators of pesticide pollution in environmental samples.

Green-Engineered Barrier Creams with Montmorillonite-Chlorophyll Clays as Adsorbents for Benzene, Toluene, and Xylene

Dermal exposures to hazardous environmental chemicals in water can significantly affect the morphology and integrity of skin structure, leading to enhanced and deeper penetration. Organic solvents, such as benzene, toluene, and xylene (BTX), have been detected in humans following skin exposure. In this study, novel barrier cream formulations (EVB™) engineered with either montmorillonite (CM and SM) or chlorophyll-amended montmorillonite (CMCH and SMCH) clays were tested for their binding efficacy for BTX mixtures in water. The physicochemical properties of all sorbents and barrier creams were characterized and were shown to be suitable for topical application. In vitro adsorption results indicated that EVB-SMCH was the most effective and favorable barrier for BTX, as supported by the high binding percentage (29-59% at 0.05 g and 0.1 g), stable binding at equilibrium, low desorption rates, and high binding affinity. Pseudo-second-order and the Freundlich models best fit the adsorption kinetics and isotherms, and the adsorption was an exothermic reaction. Ecotoxicological models using L. minor and H. vulgaris that were submersed in aqueous culture media showed that the inclusion of 0.05% and 0.2% EVB-SMCH reduced BTX concentration. This result was further supported by the significant and dose-dependent increase in multiple growth endpoints, including plant frond number, surface area, chlorophyll content, growth rate, inhibition rate, and hydra morphology. The in vitro adsorption results and in vivo plant and animal models indicated that green-engineered EVB-SMCH can be used as an effective barrier to bind BTX mixtures and interrupt their diffusion and dermal contact.

Adsorption and detoxification of glyphosate and aminomethylphosphonic acid by montmorillonite clays

The co-occurrence of mixtures of glyphosate (GLP) and aminomethylphosphonic acid (AMPA) in contaminated water, soil, sediment, and plants is a cause for concern due to potential threats to the ecosystem and human health. Major routes of exposure include contact with contaminated water and soil and through consumption of crops containing GLP and AMPA residues. Calcium montmorillonite (CM) and acid-processed montmorillonite (APM) clays were investigated for their ability to tightly sorb and detoxify GLP and AMPA mixtures. In vitro adsorption and desorption isotherms and thermodynamic analysis indicated saturable Langmuir binding of both chemicals with high capacities, affinities, enthalpies, and free energies of sorption and low desorption rates. In silico computational modeling indicated that both GLP and AMPA can be readily absorbed onto clay surfaces through electrostatic interactions and hydrogen bonding. The safety and efficacy of the clays were confirmed using well-established living organisms, including an aquatic cnidarian (Hydra vulgaris), a soil nematode (Caenorhabditis elegans), and a floating plant (Lemna minor). Low levels of clay inclusion (0.05% and 0.2%) in the culture medium resulted in increased growth and protection against chemical mixtures based on multiple endpoints. Results indicated that montmorillonite clays may be used to bind mixtures of GLP and AMPA in water, soil, and plants.

Development and characterization of chlorophyll-amended montmorillonite clays for the adsorption and detoxification of benzene

After disasters, such as forest fires and oil spills, high levels of benzene (> 1 ppm) can be detected in the water, soil, and air surrounding the disaster site, which poses a significant health risk to human, animal, and plant populations in the area. While remediation methods with activated carbons have been employed, these strategies are limited in their effectiveness due to benzene's inherent stability and limited retention to most surfaces. To address this problem, calcium and sodium montmorillonite clays were amended with a mixture of chlorophyll (a) and (b); their binding profile and ability to detoxify benzene were characterized using in vitro, in silico, and well-established ecotoxicological (ecotox) bioassay methods. The results of in vitro isothermal analyses indicated that chlorophyll-amended clays showed an improved binding profile in terms of an increased binding affinity (Kf = 668 vs 67), increased binding percentage (52% vs 11%), and decreased rates of desorption (28% vs 100%), compared to the parent clay. In silico simulation studies elucidated the adsorption mechanism and validated that the addition of the chlorophyll to the clays increased the adsorption of benzene through Van der Waals forces (i.e., aromatic π-π stacking and alkyl-π interactions). The sorbents were also assessed for their safety and ability to protect sensitive ecotox organisms (Lemna minor and Caenorhabditis elegans) from the toxicity of benzene. The inclusion of chlorophyll-amended clays in the culture medium significantly reduced benzene toxicity to both organisms, protecting C. elegans by 98-100% from benzene-induced mortality and enhancing the growth rates of L. minor. Isothermal analyses, in silico modeling, and independent bioassays all validated our proof of concept that benzene can be sequestered, tightly bound, and stabilized by chlorophyll-amended montmorillonite clays. These novel sorbents can be utilized during disasters and emergencies to decrease unintentional exposures from contaminated water, soil, and air.

Inclusion of Montmorillonite Clays in Environmental Barrier Formulations to Reduce Skin Exposure to Water-Soluble Chemicals from Polluted Water

Dermal exposures to environmental chemicals can significantly affect the morphology and integrity of skin structure, leading to enhanced and deeper penetration of toxic chemicals. This problem can be magnified during disasters where hazardous water-soluble chemicals are readily mobilized and redistributed in the environment, threatening the health of vulnerable populations at the impacted sites. To address this issue, barrier emulsion formulations (EVB) have been developed consisting of materials that are generally recognized as safe, with the inclusion of medical grade carbon or calcium and sodium montmorillonite clays (CM and SM). In this study, the adsorption efficacy of five highly toxic and commonly occurring contaminants of concern, including important hydrophilic pesticides (glyphosate, acrolein, and paraquat) and per- and polyfluoroalkyl substances were characterized. EVB showed properties such as high stability, spreadability, low rupture strength, and neutral pH that were suitable for topical application on the skin. The in vitro adsorption results indicated that EVB and EVB-SM were effective, economically feasible, and favorable barrier formulations for hazardous chemical adsorption, as supported by high binding percentage, low desorption rates for an extended period of time, and high binding affinity. A pseudo-second-order kinetic model was best fitted for the adsorption process and the Freundlich model fit the adsorption isotherms with negative enthalpy values indicating spontaneous reactions that involve physisorption. The study, with varying temperatures and pH, showed that the adsorption reaction was exothermic and persistent. The results indicated that EVB and EVB-SM can be used as effective barriers to block dermal contact from water-soluble toxic pollutants during disasters.

Montmorillonite clay-based sorbents decrease the bioavailability of per- and polyfluoroalkyl substances (PFAS) from soil and their translocation to plants

Consumption of food and water contaminated with per- and polyfluoroalkyl substances (PFAS) presents a significant risk for human exposure. There is limited data on high affinity sorbents that can be used to reduce the bioavailability of PFAS from soil and translocation to plants and garden produce. To address this need, montmorillonite clay was amended with the nutrients carnitine and choline to increase the hydrophobicity of the sorbent and the interlayer spacing. In this study, the binding of PFOA (perfluorooctanoic acid) and PFOS (perfluorooctanesulfonic acid) to parent and amended clays was characterized. Isothermal analyses were conducted at pH 7 and ambient temperature to simulate environmentally-relevant conditions. The data for all tested sorbents fit the Langmuir model indicating saturable binding sites with high capacities and affinities under neutral conditions. Amended montmorillonite clays had increased capacities for PFOA and PFOS (0.51-0.71 mol kg^-1) compared to the parent clay (0.37-0.49 mol kg^-1). Molecular dynamics (MD) simulations suggested that hydrophobic and electrostatic interactions at the terminal fluorinated carbon chains of PFAS compounds were major modes of surface interaction. The safety and efficacy of the clays were confirmed in a living organism (Lemna minor), where clays (at 0.1% inclusion) allowed for increased growth compared to PFOA and PFOS controls (p ≤ 0.01). Importantly, soil studies showed that 2% sorbent inclusion could significantly reduce PFAS bioavailability from soil (up to 74%). Studies in plants demonstrated that inclusion of 2% sorbent significantly reduced PFAS residues in cucumber plants (p ≤ 0.05). These results suggest that nutrient-amended clays could be included in soil to decrease PFAS bioavailability and translocation of PFAS to plants.

Application of Edible Montmorillonite Clays for the Adsorption and Detoxification of Microcystin

Exposure to microcystins (MCs) in humans and animals commonly occurs through the consumption of drinking water and food contaminated with cyanobacteria. Although studies have focused on developing water filtration treatments for MCs using activated carbon, dietary sorbents to reduce the bioavailability of MCs from the stomach and intestines have not been reported. To address this need, edible calcium and sodium montmorillonite clays were characterized for their ability to bind MC containing leucine and arginine (MC-LR) under conditions simulating the gastrointestinal tract and compared with a medical-grade activated carbon. Results of in vitro adsorption isotherms and thermodynamics showed that binding plots for MC-LR on montmorillonites fit the Langmuir model with high binding capacity, affinity, Gibbs free energy, and enthalpy. The in silico results from molecular modeling predicted that the major binding mechanisms involved electrostatics and hydrogen bonds, and that interlayers were important binding sites. The safety and detoxification efficacy of the sorbents against MC-LR were validated in a battery of living organisms, including Hydra vulgaris, Lemna minor, and Caenorhabditis elegans. The inclusion of 0.05% and 0.1% montmorillonite clays in hydra media significantly reduced MC-LR toxicity and protected hydra by 60-80%, whereas only slight protection was shown with the heat-collapsed clay. In the Lemna minor assay, montmorillonites significantly enhanced the growth of lemna, as supported by the increase in frond number, surface area, chlorophyll content, and growth rate, as well as the decrease in inhibition rate. Similar results were shown in the C. elegans assay, where montmorillonite clays reduced MC-LR effects on body length and brood size. All 3 bioassays confirmed dose-dependent protection from MC-LR, validated the in vitro and in silico findings, and suggested that edible montmorillonites are safe and efficacious binders for MC-LR. Moreover, their inclusion in diets during algal blooming seasons could protect vulnerable populations of humans and animals.