Synergistic/antagonistic effects and mechanisms of Cr(VI) adsorption and reduction by Fe(III)-HA coprecipitates

Enhancing assimilatory sulfate reduction with ferrihydrite-humic acid coprecipitate in anaerobic sulfate-containing wastewater treatment

Sulfide produced from dissimilatory sulfate reduction can combine with hydrogen to form hydrogen sulfide, causing odor issues and environmental pollution. To address this problem, ferrihydrite-humic acid coprecipitate was added to improve assimilatory sulfate reduction (ASR), resulting in a decrease in sulfide production (190.2 ± 14.6 mg/L in the Fh-HA group vs. 246.3 ± 8.1 mg/L in the Fh group) with high sulfate removal. Humic acid, adsorbed on the surface of ferrihydrite, delayed secondary mineralization of ferrihydrite under sulfate reduction condition. Therefore, more iron-reducing species (e.g. Trichococcus, Geobacter) were enriched with ferrihydrite-humic acid coprecipitate to transfer more electrons to other species, which led to more COD reduction, an increase in electron transfer capacity, and a decrease in the NADH/NAD+ ratio. Metagenomic analysis also indicated that functional genes related to ASR was enhanced with ferrihydrite-humic acid coprecipitate. Thus, the addition of ferrihydrite-humic acid coprecipitate can be considered as a promising candidate for anaerobic sulfate wastewater treatment.

Mechanistic insights into the detoxification of Cr(VI) and immobilization of Cr and C during the biotransformation of ferrihydrite-polygalacturonic acid-Cr coprecipitates

Coupled reactions among chromium (Cr), organic matter (OM), and iron (Fe) minerals play significant roles in Cr and carbon (C) cycling in Cr-contaminated soils. Although the inhibitory effects of Cr or polysaccharides acid (PGA) on ferrihydrite transformation have been widely studied, mechanistic insights into detoxification of Cr(VI) and immobilization of Cr and C during the microbially mediated reductive transformation of ferrihydrite remain unclear. In this study, underlying sequestration mechanisms of Cr and C during dissimilatory Fe reduction at various Cr/Fe ratios were investigated. Solid-phase analysis showed that reductive transformation rates of ferrihydrite were impeded by high Cr/Fe ratio and more magnetite was found at low Cr loadings. Microscopic analysis showed that formed Cr(III) was immobilized by magnetite and goethite through isomorphous substitution, whereas PGA was adsorbed on the crystalline Fe mineral surface. Spectroscopic results uncovered that binding of Fe minerals and PGA was achieved by surface complexation of structural Fe with carboxyl functional groups, and that the adhesion order of PGA functional groups and Fe minerals was influenced by the Cr/Fe ratios. These findings have significant implications for remediating Cr contaminants, realizing C fixation, and developing a quantitative model for Cr and C cycling by coupling reductive transformation in Cr-contaminated environments.

Heavy-metal resistant bio-hybrid with biogenic ferrous sulfide nanoparticles: pH-regulated self-assembly and wastewater treatment application

Self-assembled bio-hybrids with biogenic ferrous sulfide nanoparticles (bio-FeS) on the cell surface are attractive for reduction of toxic heavy metals due to higher activity than bare bacteria, but they still suffer from slow synthesis and regeneration of bio-FeS and bacterial activity decay for removal of high-concentration heavy metals. A further optimization of the bio-FeS synthesis process and properties is of vital importance to address this challenge. Herein, we present a simple pH-regulation strategy to enhance bio-FeS synthesis and elucidated the underlying regulatory mechanisms. Slightly raising the pH from 7.4 to 8.3 led to 1.5-fold higher sulfide generation rate due to upregulated expression of thiosulfate reduction-related genes, and triggered the formation of fine-sized bio-FeS (29.4 ± 6.1 nm). The resulting bio-hybrid exhibited significantly improved extracellular reduction activity and was successfully used for treatment of high-concentration chromium -containing wastewater (Cr(VI), 80 mg/L) at satisfactory efficiency and stability. Its feasibility for bio-augmented treatment of real Cr(VI)-rich electroplating wastewater was also demonstrated, showing no obvious activity decline during 7-day operation. Overall, our work provides new insights into the environmental-responses of bio-hybrid self-assembly process, and may have important implications for optimized application of bio-hybrid for wastewater treatment and environmental remediation.

A metal-organic framework surrounded with conjugate acid-base pairs for the efficient capture of Cr(VI) via hydrogen bonding over a wide pH range

Given the large amount of toxic Cr(VI) wastewater from various industries, it is urgent to take effective treatment measures. Adsorption has been regarded as highly desirable for Cr(VI) removal, but the effectiveness of most adsorbents is significantly dependent on pH value, in which precipitous performance drop and even structural collapse generally occur in strong acidic/alkaline aqueous. Thus, maintaining high adsorption performance and structural integrity over a wide pH range is challenging. To efficiently remove Cr(VI), we designed and prepared of an acid-base resistant metal-organic framework (MOF) Zr-BDPO, by introducing weak acid-base groups (-NH-, -N= and -OH) onto the ligand. Zr-BDPO achieved a maximum adsorption capacity of 555.6 mg·g^-1 and retained skeletal structure at pH= 1-11. Interestingly, all these groups can generate conjugate acid-base pairs by means of H⁺ and OH^- in the external solution and then form buffer layer. The removal of Cr(VI) at a broad range of pH values primarily via hydrogen bonds between -NH- and -OH, and the oxoanion species of Cr(VI) is unusual. This strategy that insulating high concentrations of acids and bases and relying on hydrogen bonds to capture Cr(VI) oxoanions provides a new perspective for actual Cr(VI) wastewater treatment.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

New insights into the adsorption behavior of thiacloprid at the microfibers/water interface: Role of humic acid

Dissolved organic matter regulates the interaction between microplastics (MPs) and organic pollutants. Here, this paper investigated the effect and mechanism of humic acid (HA) on the adsorption behavior of thiacloprid at two microfibers (MFs)/water interface, and compared the differences in the performance of MFs and pure MPs. The results showed that 10 mg L^-1 HA decreased the adsorption capacity and the partition coefficient K_D of thiacloprid on MFs and pure MPs. Spectral analysis showed that HA could form hydrogen bonds and van der Waals forces with both MPs and thiacloprid, ultimately affecting the adsorption behavior of thiacloprid at MPs/water interface via competitive adsorption and bridging effect. Furthermore, two-dimensional correlation spectroscopy demonstrated that thiacloprid was preferentially adsorbed onto MPs compared with HA. Finally, density functional theory calculation demonstrated that phenolic-OH, -COOH, and alcoholic-OH played critical roles in competing adsorption and bridging effect. This study offers a theoretical foundation for a better comprehension of the adsorption behavior of organic pollutants at the MPs/water interface.

Humic acid addition sequence and concentration affect sulfur incorporation, electron transfer, and reactivity of sulfidated nanoscale zero-valent iron

Nanoscale zero-valent iron (nZVI) is extensively used in field remediation and can be sulfidated in situ with sulfide or sulfate-reducing bacteria to enhance its performance. Humic acid (HA) widely exists in nature, but its influence on both the sulfidation process of nZVI and the reactivity of sulfidated nZVI (S-nZVI) has been rarely reported. Herein, we first synthesized S-nZVI by one-pot (S₁-nZVI) and two-step (S₂-nZVI) approaches with adding HA before (pre-added) or after (post-added) Fe_xS_y generation, respectively. Then, we evaluated their reactivity on Cr(VI) removal and analyzed the effects of HA on sulfidation regarding electron transfer resistance, sulfur incorporation, and structure characterization. Pre-added HA inhibited the Cr(VI) removal by S₁-nZVI more seriously than by S₂-nZVI and nZVI, and stronger inhibition was observed at higher HA concentrations. The inhibitory effect can be attributed mainly to the adsorbed HA increasing the impedance of the material and the free HA impeding the generation and deposition of Fe_xS_y. Different from the inhibition of pre-added HA at all studied HA concentrations, the Cr(VI) removal by both S₁-nZVI and S₂-nZVI with post-added HA was enhanced at specific HA concentrations. The reason for this phenomenon was that the dispersion and specific surface area of S-nZVI were improved, thereby offsetting the inhibition from both impedance increase and sulfur loss. This work suggests that the presence of HA can affect the sulfidation process and the property of S-nZVI, which is conducive to evaluating the performance of S-nZVI produced both by injection and in situ in the subsurface contaminant remediation.

Fate of Cr(VI) during aging of ferrihydrite-humic acid co-precipitates: Comparative studies of structurally incorporated Al(III) and Mn(II)

Ferrihydrite-humic acid co-precipitates have impacts on the adsorption and reduction of Cr(VI) in the natural environment. Besides, ferrihydrite-humic acid co-precipitates usually coexist with foreign metal cations like Al(III) and Mn(II), which may change the properties of ferrihydrite and affect the fate of Cr(VI). In this work, structurally incorporated Al(III) or Mn(II) in ferrihydrite-humic acid co-precipitates with Cr(VI) (Fh-HA-Cr-Al or Fh-HA-Cr-Mn) were prepared, and the behavior and phase transformation of co-precipitates were explored via the characterization analyses of samples during aging for 10 days. This study showed that partial adsorbed Cr(VI) was reduced to Cr(III) in the presence of humic acid, thereby reducing the toxicity of Cr(VI). Interestingly, two different results occurred because of the incorporation of Al(III) and Mn(II). Al(III) hindered the transformation of ferrihydrite and changed the aging products by inhibiting the dissolution of ferrihydrite, which decreased Cr to incorporate iron minerals. By contrast, doping of Mn(II) accelerated the phase transformation of co-precipitates, and was more conducive to the encapsulation and fixation of Cr. The results of this study can facilitate the understanding of the effects of Al(III) and Mn(II) on Cr(VI) fixation during the aging of Fh-HA-Cr.

Outstanding performance of sulfurated titanomaghemite (Fe2TiO5) for hexavalent chromium removal: Sulfuration promotion mechanism and its application in chromium resource recovery

A lot of magnetic sorbents have been developed to meet the current demand for removing Cr (VI) from wastewater. However, the application of magnetic sorbents remains restricted by the unsatisfactory Cr (VI) removal efficiency, sorbent regeneration, and safe disposition of adsorbed Cr species. In this study, magnetic titanomaghemite (Fe₂TiO₅) was sulfurated with gaseous H₂S to improve its Cr (VI) removal efficiency. Sulfuration significantly improved the Cr (VI) removal efficiency of Fe₂TiO₅ from 3%-14% to 27%-82% at pH 4-10 due to drastically increased the electrostatic adsorption of Cr (VI) and heterogeneous reduction of adsorbed Cr (VI) to Cr (III). Furthermore, the sulfurated Fe₂TiO₅ recovered using magnetic separation can be regenerated by re-sulfuration without degrading the Cr (VI) removal efficiency, therefore, sulfurated Fe₂TiO₅ can be recycled for Cr (VI) removal after the regeneration. Moreover, Cr (VI) in aqueous solution can be enriched on sulfurated Fe₂TiO₅ after multiple adsorptions in the form of Cr₂O₃ in a content of more than 30% what can be considered as a source of chrome ore. Therefore, sulfurated Fe₂TiO₅ may be a promising, low-cost, and environment-friendly sorbent for Cr recovery as a co-benefit of Cr (VI) removal from wastewater.

Microscopic mechanism about the selective adsorption of Cr(VI) from salt solution on nitrogen-doped carbon aerogel microsphere pyrolysis products

A series of nitrogen-doped carbon aerogels (NCAs) were obtained through phase reaction polymerization and different carbonization temperatures to enhance adsorption efficacy of hexavalent chromium (Cr[VI]) from wastewater significantly. Factors that influence adsorption properties of carbon aerogel microspheres toward Cr(VI), such as pH, adsorbent content, initial Cr(VI) concentrations, and coexisting anion, were investigated. Three isotherm (Langmuir, Freundlich, and Sips) and three kinetic (pseudofirst-order, pseudosecond-order, and Elovich) models were used to interpret the adsorption process. The adsorption capacity of Cr(VI) reached 180.62 mg·g^-1, which was superior to that of most aerogel adsorbents. In addition to the adsorption effect, the XPS results also showed that N-containing groups on the NCA surface reduce the adsorbed Cr(VI) to the less toxic Cr(III). The prepared sorbent demonstrates a negligible loss in adsorption capacity after 6 cycles. NCAs show acceptable application prospects in selective removal of Cr(VI) ions.

Synthesis of nickel-iron layered double hydroxide via topochemical approach: Enhanced surface charge density for rapid hexavalent chromium removal

Hexavalent chromium (Cr(VI)) is considered to be a potential metal contaminant because of its toxicity and carcinogenicity. In this work, the surface charge density of nickel-iron layered double hydroxide (NiFe LDH) is tuned through iron valence change to improve the performance in adsorption of Cr(VI). The addition of iron divalent in the precursor enhances the surface positivity and reducibility of Fe²⁺-NiFe LDH, resulting in a nearly 150% Cr(VI) maximum adsorption capacity improvement. The increase of hydroxyl groups and charge density on the surface of NiFe LDH is due to the topological chemical transition from Ni²⁺-Fe²⁺ LDH to Ni²⁺-Fe³⁺ LDH. The adsorption of Cr(VI) onto Fe²⁺-NiFe LDH prepared via topochemical approach is highly pH-dependent. The adsorption dynamics and isotherms results may be clearly elucidated by the pseudo-second-order model and Langmuir isotherm model. Electrostatic attraction, interlayer anion exchange and adsorption-coupled reduction are proven to be the main Cr(VI) removal mechanisms for Fe²⁺-NiFe LDH. This finding demonstrates that Fe²⁺-NiFe LDH adsorbents have potential application for efficient removal of Cr(VI) pollutants.