First evidence of microplastics occurrence in mixed surface and treated wastewater from two major Saudi Arabian cities and assessment of their ecological risk

The effect of water ozonation in the presence of microplastics on water quality and microplastics degradation

The occurrence of microplastics in water treatment plants poses a concern for the quality of treated water. When microplastics pass through water treatment plants, they can be oxidized, changing their surface characteristics and the quality of the treated water. This work aimed to investigate the impact of ozone and the association of ozone and hydrogen peroxide on five different microplastic particles that are commonly detected in water samples. The changes in the concentration of total organic carbon and the change in the pH of the water, the leaching of phthalic acid esters, as well as the changes in size and chemical changes in the structure of the tested microplastics were evaluated. The influence of ozonation time, water pH, and type of microplastics, as well as the influence of the addition of hydrogen peroxide, was analyzed. The effect of ozonation was an increase in DOC values ranging from 0.8 to 28 mg/L. The eluting substances included phthalic acid esters, plasticizers with a proven negative impact on organisms. The percentage loss of the surface area of the microplastic was in the range of 1.3 to 26.7 %. PE was more susceptible to degradation. LDIR analyzes were carried out to investigate the effect of O3 and O3/H2O2 treatments on the surface of MPs. This study demonstrated that MPs could change their physical and chemical characteristics if they are subjected to oxidation processes used in water treatment plants. The parameters of purified water change to unfavorable ones due to the leaching of additives. Although much research has been conducted on the occurrence of microplastics in treated water, awareness needs to be raised about the interactions between plastic particles and water treatment technology processes.

Microplastics in drinking water: A review on methods, occurrence, sources, and potential risks assessment

Microplastics in drinking water captured widespread attention following reports of widespread detection around the world. Concerns have been raised about the potential adverse effects of microplastics in drinking water on human health. Given the widespread interest in this research topic, there is an urgent need to compile existing data and assess current knowledge. This paper provides a systematic review of studies on microplastics in drinking water, their evidence, key findings, knowledge gaps, and research needs. The data collected show that microplastics are widespread in drinking water, with large variations in reported concentrations. Standardized methodologies of sampling and analysis are urgently needed. There were more fibrous and fragmented microplastics, with the majority being <10 μm in size and composed of polyester, polyethylene, polypropylene, and polystyrene. Little attention has been paid to the color of microplastics. More research is needed to understand the occurrence and transfer of microplastics throughout the water supply chain and the treatment efficiency of drinking water treatment plants (DWTPs). Methods capable of analyzing microplastics <10 μm and nanoplastics are urgently needed. Potential ecological assessment models for microplastics currently in use need to be improved to take into account the complexity and specificity of microplastics.

Microplastics in aquatic ecosystems of Africa: A comprehensive review and meta-analysis

Microplastic pollution is a global issue of great public concern. Africa is flagged to host some of the most polluted water bodies globally, but there is no enough information on the extent of microplastic contamination and the potential risks of microplastic pollution in African aquatic ecosystems. This meta-analysis has integrated data from published articles about microplastic pollution in African aquatic ecosystems. The data on the microplastic distribution and morphological characteristics in water, sediments and biota from African rivers, lakes, oceans and seas were extracted from 75 selected studies. Multivariate statistics were used to critically analyze the effects of sampling and detection methods, ecological risks, spatial distribution and similarity of microplastics in relation to the geographical distance between sampling sites. This study found that sampling methods have significant effect on abundance and morphological characteristics of microplastics and that African aquatic ecosystems are highly contaminated with microplastics compared to global data. The most prevalent colors were white, transparent and black, the most prevalent shapes were fibres and fragments, and the most available polymers were polypropylene (PP), polystyrene (PS) and polyethene terephthalate (PET). Microplastic polymers similarity decreased with an increase in geographical distance between sites. Risk levels of microplastics in African aquatic ecosystems were comparatively high, and more than 40 % of water and sediments showed highest level of ecological risk. This review provides recent information on the prevalence, distribution and risks of microplastics in African aquatic ecosystems.

Spatio-temporal variation and ecological risk assessment of microplastics along the touristic beaches of a mediterranean coast transect (Valencia province, East Spain)

Annually, the Mediterranean region attracts around one-third of the global coastal tourism, which is acknowledged as a substantial contributor to plastic pollution. Coastal municipalities mitigate this through periodic sand and shore cleaning. However, the efficacy of these measures remains uncertain. In this study, the occurrence of MPs (10 μm-5 mm) in sand from seven different, regularly cleaned, touristic beaches of the coastline of Valencia province (E Spain) was assessed. Two different sampling campaigns were performed in winter and in summer (2022) to compare the results and understand the influence of the high touristic activity, as well as, the efficiency of the measures taken against MPs pollution. The methodology used was designed specifically for the matrix and employed density separation using a Sediment Microplastic Isolation (SMI) Unit. In addition to conventional visual inspection and ATR-FTIR, automatic quantification and identification of the polymers of lower size was performed by μFTIR. The average MPs concentration in the summer (339 ± 92 MP kg-1 by stereomicroscopy and 339 ± 189 MP kg-1 by μFTIR) was significantly higher than in the winter (71 ± 92 MP kg-1 and 143 ± 85 MP kg-1) (p < 0.05). The combination of these analytical tools provides comprehensive information about the MPs present in beach sand. Fibers were the most abundant form of MPs, while most of the polymers analyzed were polyethylene (PE) and halogenated polystyrene (Cl-PS and Br-PS) with food packaging, swimming equipment and fishing nets being their most probable sources. Ecological risk assessment was performed through the Pollution Load Index (PLI), the Hazardous Index (HI) and the Risk Quotient (RQ), with the results indicating potential risk that ranges from moderate to high depending on the applied approach.

Amplifiers of environmental risk of microplastics in sewage sludge: Thermal drying treatment

Sewage sludge was already identified as an important source of microplastics (MPs) in the environment. Therefore, investigating the effects of sludge treatment processes on sludge-based MPs is essential for understanding the environmental risks and controlling their release. This study investigated the occurrence characteristics and elucidated the fragmentation mechanism of sludge-based MPs before and after the thermal drying treatment of sludge. The results showed that this treatment increased the abundance of sludge-based MPs by about 10-fold, with enhanced fragmentation and fracture parameters, and increased the abundance of <100 μm MPs to >60 %. Remarkably, both polypropylene-microplastics (PP-MPs) and polyethylene terephthalate-microplastics (PET-MPs) did not show significant chemical aging. The structural analysis showed that the molecular chain disorientation and secondary crystallization of PP-MPs and PET-MPs occurred. These transformations caused the contraction of the polymer molecular chains and the generation of micro-mechanical stresses, leading to the formation of warpage structures and stress cracking on the MPs' surface. These phenomena also contributed to the further fragmentation of the MPs and the development of finer MPs particles. The findings of the present investigations emphasize that the thermal drying of sewage sludge amplifies the environmental risk of sludge-based MPs.

Spatial distribution and historical trend of microplastic pollution in sediments from enclosed bays of South Korea

Seafloor sediments are an important sink for microplastics (MPs), and the vertical profile of MP accumulation in a sediment core represents historical pollution trends. In this study, MP (20-5000 μm) pollution in surface sediments of urban, aquaculture, and environmental preservation sites in South Korea was evaluated, and the historical trend was investigated using age-dated core sediments from the urban and aquaculture sites. The abundance of MPs ranked in the order of urban, aquaculture, and environmental preservation sites. Polymer types were more diverse at the urban site compared to other sites, and expanded polystyrene was dominant in the aquaculture site. An increase in MP pollution and polymer types was observed from bottom to top of cores, and historical trends of MP pollution reflect local influences. Our results indicate that the characteristics of MPs are determined by human activities, and MP pollution should be addressed according to the characteristics of each site.

Microplastics in coastal blue carbon ecosystems: A global Meta-analysis of its distribution, driving mechanisms, and potential risks

Microplastics, as emerging pollutants, have become a global environmental concern. Blue carbon ecosystems (BCEs) are threatened by microplastics. Although substantial studies have explored the dynamics and threats of microplastics in BCEs, the fate and driving factors of microplastics in BCEs on a global scale remain largely unknown. Here, the occurrence, driving factors, and risks of microplastics in global BCEs were investigated by synthesizing a global meta-analysis. The results showed that the abundance of microplastics in BCEs has notable spatial differences worldwide, with the highest microplastic concentrations in Asia, especially in South and Southeast Asia. Microplastic abundance is influenced by the vegetation habitat, climate, coastal environment, and river runoff. The interaction of geographic location, ecosystem type, coastal environment, and climate enhanced the effects of microplastic distribution. In addition, we found that microplastic accumulation in organisms varied according to feeding habits and body weight. Significant accumulation was observed in large fish; however, growth dilution effects were also observed. The effect of microplastics on the organic carbon content of sediments from BCEs varies by ecosystem; microplastic concentrations do not necessarily increase organic carbon sequestration. Global BCEs are at a high risk of microplastic pollution, with high microplastic abundance and toxicity driving the high pollution risk. Finally, this review provides scientific evidence that will form the basis for future microplastic research, focusing on the transport of microplastics in BCEs; effects on the growth, development, and primary productivity of blue carbon plants; and soil biogeochemical cycles.

Occurrence and risks of microplastics in the ecosystems of the Middle East and North Africa (MENA)

The ubiquitous nature of microplastics (MPs) in nature and the risks they pose on the environment and human health have led to an increased research interest in the topic. Despite being an area of high plastic production and consumption, studies on MPs in the Middle East and North Africa (MENA) region have been limited. However, the region witnessed a research surge in 2021 attributed to the COVID-19 pandemic. In this review, a total of 97 studies were analyzed based on their environmental compartments (marine, freshwater, air, and terrestrial) and matrices (sediments, water columns, biota, soil, etc.). Then, the MP concentrations and polymer types were utilized to conduct a risk assessment to provide a critical analysis of the data. The highest MP concentrations recorded in the marine water column and sediments were in the Mediterranean Sea in Tunisia with 400 items/m³ and 7960 items/kg of sediments, respectively. The number of MPs in biota ranged between 0 and 7525 per individual across all the aquatic compartments. For the air compartment, a school classroom had 56,000 items/g of dust in Iran due to the confined space. Very high risks in the sediment samples (Erⁱ > 1500) were recorded in the Caspian Sea and Arab/Persian Gulf due to their closed or semi-closed nature that promotes sedimentation. The risk factors obtained are sensitive to the reference concentration which calls for the development of more reliable risk assessment approaches. Finally, more studies are needed in understudied MENA environmental compartments such as groundwater, deserts, and estuaries.

Abundance, characteristics, and risk assessment of microplastics in indigenous freshwater fishes of India

Microplastic (MP) pollution has pressing concerns regarding environmental health and the availability of safe food for humans. Information on the occurrence of MP in freshwater biota in the Indian scenario is currently lacking. The present study examined MP contamination in edible and non-edible tissues of widely consumed freshwater fishes. All the fish species (n = 35/species) analyzed had microplastic contamination with the highest MP abundance of 7.86 ± 2.0 items/individual in Channa punctatus followed by Labeo rohita (4.17 ± 0.6 items/individual) and Labeo bata (3.03 ± 0.4 items/individual); whereas MP abundance in small indigenous fishes (SIF) such as Salmostoma bacaila and Puntius amphibius accounts for 0.83 ± 0.13 and 0.77 ± 0.2 items/individual respectively. The principal component analysis results showed a 77.434% variance from two components identified for MP distribution. Fibre type MP was the most dominant type besides fragments and pellets that opined the type of MP required for ecotoxicity assessment, the need of the hour. Raman spectroscopy analysis confirms high-density and low-density polyethylene-type polymers. Evidence of MP in edible tissue indicates the translocation phenomenon resulting in human exposure through the consumption of biota contaminated with MP. Risk assessment revealed a low risk of MP based on its abundance while polymer type indicates a high risk for the fish species investigated. A thorough investigation of the level of adsorbed organic contaminants in the MP is warranted to address the interactive effects on biota. To the best of our knowledge, this is the first detailed report on MP contamination and its risk assessment in Indian freshwater fishes.

A long-term field experiment confirms the necessity of improving biowaste sorting to decrease coarse microplastic inputs in compost amended soils

Microplastic (MP) input into agroecosystems is of particular concern as their sources are diverse (mulching films, biosolid application, wastewater irrigation, flooding, atmospheric input, road runoff). Compost application, which is needed to sustain soil ecosystem services in the context of a circular economy, may be a source of microplastics. The aim of this study was to evaluate how different composts derived from urban wastes impact the nature and quantity of coarse (2-5 mm) microplastics (CMP) in soils, using a long-term field experiment in France. Composts resulting from different levels of urban waste sorting were investigated. Our approach included the isolation of microplastics from composts and amended soils followed by their characterization using pyrolysis GC/MS spectrometry. We found that coarse microplastic concentrations varied from 26.9 to 417 kg per hectare depending on the compost type, after 22 years of bi-annual application. These values may be higher than for conventional agricultural practices, as application rate was twice as high as for normal practices. Composts made from municipal solid waste were by far the organic amendments leading to the highest quantity of plastic particles in soils, emphasizing the urgent need for limiting plastic use in packaging and for improving household biowaste sorting. Our results strongly suggest that standards regulating organic matter amendment application should take microplastics into account in order to prevent contamination of (agricultural) soils. Moreover, although no impacts on the soil bio-physico-chemical parameters has been noted so far. However, given the huge microplastic inputs, there is an urgent need to better evaluate their effect on soil functioning.

Pervasiveness and characteristics of microplastics in surface water and sediment of the Buriganga River, Bangladesh

Microplastics (MPs) are an emerging environmental problem due to their all-around existence and extraordinary stability. A significant number of studies are found in recent literature on the occurrence, distribution, transport, and fate of the MPs in several environmental compartments. In this study, we have investigated the occurrence and characteristics of MPs in the surface water and sediment of the Buriganga river, located beside the mega-city of Dhaka in Bangladesh. In the Buriganga river, the concentration of MPs in the surface water was found from 4.33 ± 0.58 to 43.67 ± 0.58 items L^-1, and in the sediment, MPs varied from 17.33 ± 1.53 to 133.67 ± 5.51 items kg^-1 of dry sediment. Fragment-type MPs were predominant in the surface water and sediment, which was 72.7% and 85.5% respectively. The most abundant polymer type polypropylene (PP) was found -to be 46% in the surface water and 61% in the sediment sample. The next major category, polyethylene (PE) was found to be 26% and 21%, respectively. Polystyrene (PS), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and polyamide (PA) were other commonly detected polymer types. The MPs were found to be contaminated by Pb, Cd, Cr, Zn, Cu, and Sn from Energy dispersive-X-ray fluorescence (ED-XRF) analysis. Tannery-induced Cr was detected in the highest concentrations in the MPs, which were 20.67 ± 1.66 mg kg^-1 (in surface water) and 14.2 ± 1.25 mg kg^-1 (in sediment). The pollution load index (PLI) of the MPs contamination in different sampling sites along the Buriganga river was found in the risk level category of I and II. The anthropogenic influence of the city area was reflected in the PLI values, which had an increasing trend from the upstream sampling points (1.00 ± 1.00, 1.00 ± 1.00) to the downstream sites (10.09 ± 1.00, 7.71 ± 3.60).

Emerging contaminants migration from pipes used in drinking water distribution systems: a review of the scientific literature

Migration of emerging contaminants (ECs) from pipes into water is a global concern due to potential human health effects. Nevertheless, a review of migration ECs from pipes into water distribution systems is presently lacking. This paper reviews, the reported occurrence migration of ECs from pipes into water distribution systems in the world. Furthermore, the results related to ECs migration from pipes into water distribution systems, their probable sources, and their hazards are discussed. The present manuscript considered the existing reports on migration of five main categories of ECs including microplastics (MPs), bisphenol A (BPA), phthalates, nonylphenol (NP), perfluoroalkyl, and polyfluoroalkyl substances (PFAS) from distribution network into tap water. A focus on tap water in published literature suggests that pipes type used had an important role on levels of ECs migration in water during transport and storage of water. For comparison, tap drinking water in contact with polymer pipes had the highest mean concentrations of reviewed contaminants. Polyvinyl chloride (PVC), polyamide (PA), polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET) were the most frequently detected types of microplastics (MPs) in tap water. Based on the risk assessment analysis of ECs, levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluorohexane sulfonate (PFHxS), and perfluorooctane sulfonate (PFOS) were above 1, indicating a potential non-carcinogenic health risk to consumers. Finally, there are still scientific gaps on occurrence and migration of ECs from pipes used in distribution systems, and this needs more in-depth studies to evaluate their exposure hazards on human health.

A case study of distribution and characteristics of microplastics in surface water and sediments of the seas around Shenzhen, southern coastal area of China

Microplastics (MPs), known to cause environmental pollution, is attracting a growing attention worldwide owing to their extensive existence and potential risks to biota. The marginal sea areas are suspected to be especially susceptible to MPs pollution. Unfortunately, data on MPs in the surface water and sediments ecosystems are still limited, particularly in the southern coastal areas of China. The study was successfully utilized to explore the distribution and characteristics of MPs below 5 mm collected from 14 sites in the seas around Shenzhen, a typical special economic zone of China. MPs were detected in both surface water and sediments with concentrations ranging from 3.8 to 7.8 items per liter and 2.6 × 10³ to 10.0 × 10³ items per kilogram, respectively. The highest abundance of MPs appeared in S5/S9 and S14 in surface water and sediments, respectively. Fiber and film with small particle size (<0.5 mm) were identified as typical and abundant MPs type among all samples. In addition, polyethylene (PE) was considered as dominant forms of MPs in surface water and sediment samples. Results from this study indicated a positive correlation with abundance of MPs and urbanization rate, which also showed an evident difference of MPs in different urban functional areas. Based on the types and quantity of detected MPs, we assessed the risk of MPs pollution in this study area, and the ecological risk category of MPs was at a high level. Importantly, our work might be employed as a potential information so as to better understand MPs pollution, source tracing and ecological risk assessment, which enhances the possibility of achieving effective control and supervision of MPs pollution in southern coastal aera of China.

Microplastics in Freshwater Environment in Asia: A Systematic Scientific Review

Microplastics (MPs) are an emerging pollutant in the aquatic environment, and this has gradually been recognized in the Asian region. This systematic review study, using the Scopus database, provides an insightful understanding of the spatial distribution of scientific studies on MPs in freshwater conducted across the Asian region, utilized sampling methods, and a detailed assessment of the effects of MPs on different biotic components in freshwater ecosystems, with special focus on its potential risks on human health. The results of this review indicate that research on microplastics in Asia has gained attention since 2014, with a significant increase in the number of studies in 2018, and the number of scientific studies quadrupled in 2021 compared to 2018. Results indicated that despite a significant amount of research has been conducted in many Asian countries, they were not distributed evenly, as multiple studies selected specific rivers and lakes. Additionally, around two-thirds of all the papers focused their studies in China, followed by India and South Korea. It was also found that most of the studies focused primarily on reporting the occurrence levels of MPs in freshwater systems, such as water and sediments, and aquatic organisms, with a lack of studies investigating the human intake of MPs and their potential risks to human health. Notably, comparing the results is a challenge because diverse sampling, separation, and identification methods were applied to estimate MPs. This review study suggests that further research on the dynamics and transport of microplastics in biota and humans is needed, as Asia is a major consumer of seafood products and contributes significantly to the generation of plastic litter in the marine environment. Moreover, this review study revealed that only a few studies extended their discussions to policies and governance aspects of MPs. This implies the need for further research on policy and governance frameworks to address this emerging water pollutant more holistically.

Identification and Quantification of Microplastics in Effluents of Wastewater Treatment Plant by Differential Scanning Calorimetry (DSC)

In this research, the presence of microplastics was detected through a differential scanning calorimetry (DSC) analysis of three wastewater treatment plants. One of these plants applied only a preliminary treatment stage while the others applied up to a secondary treatment stage to evaluate their effectiveness. The results showed the presence of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene terephthalate (PET), which were classified as fragments, fibers or granules. During the evaluation of the plants, it was determined that the preliminary treatment did not remove more than 58% of the microplastics, while the plants applying up to a secondary treatment with activated sludge achieved microplastic removal effectiveness between 90% and 96.9%.

Global meta-analysis of microplastic contamination in reservoirs with a novel framework

Microplastic contamination in reservoirs is receiving increasing attention worldwide. However, a holistic understanding of the occurrence, drivers, and potential risks of microplastics in reservoirs is lacking. Building on a systematic review and meta-analysis of 30 existing publications, we construct a global microplastic dataset consisting of 440 collected samples from 43 reservoirs worldwide which we analyze through a framework of Data processing and Multivariate statistics (DM). The purpose is to provide comprehensive understanding of the drivers and mechanisms of microplastic pollution in reservoirs considering three different aspects: geographical distribution, driving forces, and ecological risks. We found that microplastic abundance varied greatly in reservoirs ranging over 2-6 orders of magnitude. Small-sized microplastics (< 1 mm) accounted for more than 60% of the total microplastics found in reservoirs worldwide. The most frequently detected colors, shapes, and polymer types were transparent, fibers, and polypropylene (polyester within aquatic organisms), respectively. Geographic location, seasonal variation and land-use type were main factors influencing microplastic abundance. Detection was also dependent on analytical methods, demonstrating the need for reliable and standardized methods. Interaction of these factors enhanced effects on microplastic distribution. Microplastics morphological characteristics and their main drivers differed between environmental media (water and sediment) and were more diverse in waters compared to sediments. Similarity in microplastic morphologies decreased with increasing geographic distance within the same media. In terms of risks, microplastic pollution and potential ecological risk levels are high in reservoirs and current policies to mitigate microplastic pollution are insufficient. Based on the DM framework, we identified temperate/subtropical reservoirs in Asia as potential high-risk areas and offer recommendations for analytical methods to detect microplastics in waters and sediments. This framework can be extended and applied to other multi-scale and multi-attribute contaminants, providing effective theoretical guidance for reservoir ecosystems pollution control and management.

Bioaccumulation of emerging contaminants in mussel (Mytilus galloprovincialis): Influence of microplastics

Coastal environments are heavily influenced by human activities. Chemical substances considered as emerging contaminants (ECs) are one of the most important indicators of the anthropic influence on the environment, and they have recently shown to interact with microplastics (MPs). Mussels are suitable for in-lab bioacumulation studies providing insight about the occurrence and fate of contaminants in the organisms. In this study, bioacummulation of 20 chemical substances catalogued as ECs, including pharmaceuticals and personal care products (PPCPs), pesticides, and perfluoroalkyl substances (PFASs) in Mytilus galloprovincialis was assessed, with or without the influence of the presence of MPs. Mussels were distributed in three groups: control (B), exposed to ECs (C) and exposed to ECs and polyethylene MPs (C+M). The study was carried out for 58 days separated in two stages (i) exposure during days 0-28, and (ii) depuration during days 29-58. Visceral mass and haemolymph of the mussels were extracted separately, using QuEChERS and solid phase extraction (SPE), respectively. Then, extracts were analysed via UHPLC-MS/MS. Results showed that 3 PPCPs, 4 pesticides and 3 PFASs accumulated in visceral mass with bioconcentration factors (BCFs) ranging 6.7-15000 L/kg/d. In addition, 2 PPCPs, 2 pesticides and PFPeA were detected in haemolymph showing BCFs ranging 0.9-3.3 L/kg/d. When comparing C and C+M, MPs worked as a vector for the accumulation of the PFASs: PFOA, PFOS, PFDA and PFPeA; showing higher BCFs in the presence of MPs. Furthermore, the elimination of PFDA and PFOS was slower in the mussels exposed to MPs. On the other hand, the pesticides terbuthylazine and chlorpyrifos showed lower BCFs and more rapid elimination in the mussels exposed to MPs.

Microplastics in Wastewater and Drinking Water Treatment Plants: Occurrence and Removal of Microfibres

Microplastics (MPs), and specifically microfibres (MPFs), are ubiquitous in water bodies, including wastewater and drinking water. In this work, a thorough literature review on the occurrence and removal of MPs, and specifically MPFs in WWTPs and DWTPs, has been carried out. When the water is treated, an average microfiber removal efficiency over 70% is achieved in WWTPs and DWTPs. These high percentages are still inefficient for avoiding the presence of a large number of microfibres in treated wastewater and also in tap water. RSF, DAF, oxidation ditch and CAS processes have been described as the most efficient treatments for eliminating MPFs from wastewater treatment. It is remarkable the wide range of the data reported on this topic; for example, treated wastewater contains between not detected and 347 MPFs/L, whereas tap water contains between not detected and 168 MPFs/L. Microfibres constitute more than half of the MPs found in treated wastewater and sewage sludge, whereas in DWTP effluents the percentage of MPFs is around 32%. Nevertheless, the relative amount of MPFs reported in tap water is notably higher (71%). Microfibres from WWTPs are discharged to the environment, being a source of MP pollution. Additionally, MPs released by DWTPs directly enter the drinking water lines, which constitute a direct route for MP human consumption, so that it has been estimated that an adult may ingest an average value of 7500 MPFs per year only via tap water. Thus, this review provides an update on the performance of WWTPs and DWTPs in removing MPs from water, which is an issue of great interest.