Stalagmites in karst cave inspired construction: lotus root-type adsorbent with porous surface derived from CO2-in-water Pickering emulsion for selective and ultrafast uranium extraction

Recent progress on Pickering emulsion stabilized essential oil added biopolymer-based film for food packaging applications: A review

Nowadays food safety and protection are a growing concern for food producers and food industry. The stability of food-grade materials is key in food processing and shelf life. Pickering emulsions (PEs) have gained significant attention in food regimes owing to their stability enhancement of food specimens. PE can be developed by high and low-energy methods. The use of PE in the food sector is completely safe as it uses solid biodegradable particles to stabilize the oil in water and it also acts as an excellent carrier of essential oils (EOs). EOs are useful functional ingredients, the inclusion of EOs in the packaging film or coating formulation significantly helps in the improvement of the shelf life of the packed food item. The highly volatile nature, limited solubility and ease of oxidation in light of EOs restricts their direct use in packaging. In this context, the use of PEs of EOs is suitable to overcome most of the challenges, Therefore, recently there have been many papers published on PEs of EOs including active packaging film and coatings and the obtained results are promising. The current review amalgamates these studies to inform about the chemistry of PEs followed by types of stabilizers, factors affecting the stability and different high and low-energy manufacturing methods. Finally, the review summarizes the recent advancement in PEs-added packaging film and their application in the enhancement of shelf life of food.

Fabrication of double imprinted anchor points in cellulose nanocrystals-based hierarchical porous polyHIPEs for selective separation of flavoniods under physiological pH

Previous research had proved that molecular imprinted polymers can be used as separation material for removing Naringin (NRG) from agricultural pomelo wastes effectively. But the adsorption amounts of NRG molecules from traditional MIPs was quite low by using boronic acid as functional monomer because of single affinity interaction. Therefore, we developed the new combination of bifunctional monomers (i.e. low pKa boronate affinity monomer 2,4-difluoro-3-formylphenylboronic acid and dopamine) based on cellulose nanocrystals (CNCs) mixed with polymerized high internal phase emulsion (polyHIPE, PH) through an double layer surface imprinted method. The introduction of polyethylenimine (PEI) can offer abundant anchor units for the growth of more anchor sites to immobilization template molecules. Importantly, largely improved selective adsorption amounts (50.79 μmol g-1), which may be attribute to the fabrication of the uniform growth of double imprinted layers onto the polydopamine (PDA)/boronic acid-based surfaces. In addition, the resulting double recognition molecular imprinted polymers (MIPs) based on hypercrosslinked PH (DR-HCLPH@MIPs) not only exhibited fast adsorption kinetic of NRG molecule, but also possessed excellent selectivity and high adsorption capacities at physiological pH. Meanwhile, the coarse NRG from pomelo waste can be high selectively extracted to 94.74%. Overall, this study provides a versatile approach for fabrication of the sandwich-biscuit-like double imprinting layer porous MIPs for precise identification and ultrafast transport separation of NRG from complex samples.

Efficient and sustainable extraction of uranium from aquatic solution using biowaste-derived active carbon

Efficient and cost-effective biosorbents derived from biowaste are highly demanding to handle various environmental challenges, and demonstrate the remarkable synergy between sustainability and innovation. In this study, the extraction of uranium U(VI) was investigated on biowaste activated carbon (BAC) obtained by chemical activation (phosphoric acid) using Albizia Lebbeck pods as biowaste. The biowaste powder (BP), biowaste charcoal (BC) and BAC were evaluated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) with nitrogen adsorption for thermal properties, chemical structures, porosity and surface area, respectively. The pHPZC for acidic or basic nature of the surface and X-ray diffraction (XRD) analysis were performed for BAC. The morphological and elemental analysis were performed by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The extraction of uranium U(VI) ions from aqueous solutions using BAC as sorbent was investigated by using different variables such as pH, contact time, initial uranium U(VI) concentration and BAC dose. The highest adsorption (90.60% was achieved at 0.5 g BAC dose, 2 h contact time, pH 6, 10 ppm initial U(VI) concentration and with 200 rpm shaking speeds. The production of this efficient adsorbent from biowaste could be a potential step forward in adsorption of uranium to meet the high demand of uranium for nuclear energy applications.

Efficient adsorption of low-concentration uranium from aqueous solutions

The development of nuclear energy has led to the depletion of uranium resources and now presents the challenge of treating radioactive wastewater. Extracting uranium from seawater and nuclear wastewater has been identified as an effective strategy for addressing these issues. However, extracting uranium from nuclear wastewater and seawater is still extremely challenging. In this study, an amidoxime-modified feather keratin aerogel (FK-AO aerogel) was prepared using feather keratin for efficient uranium adsorption. The FK-AO aerogel showed an impressive adsorption capacity of 585.88 mg·g^-1 in an 8 ppm uranium solution, with a calculated maximum adsorption capacity of 990.10 mg·g^-1. Notably, the FK-AO aerogel demonstrated excellent selectivity for U(VI) in simulated seawater that contained coexisting heavy metal ions. In a uranium solution having a salinity of 35 g·L^-1 and a concentration of 0.1-2 ppm, the FK-AO aerogel achieved a uranium removal rate of greater than 90 %, indicating its effectiveness in adsorbing uranium in environments having high salinity and low concentration. This suggests that FK-AO aerogel is an ideal adsorbent for extracting uranium from seawater and nuclear wastewater, and it is also expected that it could be used in industrial applications for extracting uranium from seawater.

Bioinspired construction of magnetic nano stirring rods with radially aligned dual mesopores and intrinsic rapid adsorption of palladium

Quick and precise recovery of palladium (Pd) from electronic waste remains a serious task, owing to the strong acid and complexity of chemical compounds in leachate. Here, bioinspired construction of magnetic nano stirring rod with radially aligned dual mesopores and abundant 8-aminoquinoline (MNSR-DM-AQ) is proposed for selective and rapid extraction of Pd(II) from highly acidic sample solutions. Benefit from the unique dual mesoporous (12.4 nm and 3.6 nm) and the stirring motion under an external magnetic field, MNSR-DM-AQ possesses enhanced adsorption capacity and kinetics, achieving 11.62 mg g^-1 (97.2 % of the maximum adsorption capacity) in 15 min. Distribution coefficient (K_D = 299.0 mL g^-1), separation factor (α above 25.54) and concentration factor (CF = 230.2 mL g^-1) reveal the excellent selectivity of MNSR-DM-AQ towards Pd(II) when comparing with the coexisting ions (Ca(II), Co(II), Cu(II), Fe(II), Mg(II), Ni(II), Pb(II), Zn(II)). The adsorption mechanisms of MNSR-DM-AQ are ion exchange and chelation due to a strong affinity between Pd(II) and N. Meanwhile, 96.82 % of the captured Pd(II) can be easily eluted within 15 min, and the adsorption capacity remains stable after five adsorption-desorption cycles. It is worthwhile to mention that MNSR-DM-AQ exhibits a high adsorption capacity of 8.39 mg g^-1 from leachate of abandoned high-voltage patch capacitor, which is greatly desired in Pd(II) extraction from electronic waste.

Removal of nanoplastics in water treatment processes: A review

Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.

The Efficient and Convenient Extracting Uranium from Water by a Uranyl-Ion Affine Microgel Container

Uranium is an indispensable part of the nuclear industry that benefits us, but its consequent pollution of water bodies also makes a far-reaching impact on human society. The rapid, efficient and convenient extraction of uranium from water is to be a top priority. Thanks to the super hydrophilic and fast adsorption rate of microgel, it has been the ideal adsorbent in water; however, it was too difficult to recover the microgel after adsorption, which limited its practical applications. Here, we developed a uranyl-ion affine and recyclable microgel container that has not only the rapid swelling rate of microgel particles but also allows the detection of the adsorption saturation process by the naked eye.