Photoelectrocatalytic coupling system synergistically removal of antibiotics and antibiotic resistant bacteria from aquatic environment

From wastewater to clean water: Recent advances on the removal of metronidazole, ciprofloxacin, and sulfamethoxazole antibiotics from water through adsorption and advanced oxidation processes (AOPs)

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites. On the flip side, the review meticulously examines the main AOPs widely employed in water treatment. This includes a thorough analysis of ozonation (O3), the photo-Fenton process, UV/hydrogen peroxide (UV/H2O2), TiO2 photocatalysis, ozone/UV (O3/UV), radiation-induced AOPs, and sonolysis. Furthermore, the review provides in-depth insights into equilibrium isotherm and kinetic models as well as prospects and challenges inherent in these cutting-edge processes. By doing so, this review aims to empower readers with a profound understanding, enabling them to determine research gaps and pioneer innovative treatment methodologies for water contaminated with antibiotics.

Molecular level removal of antibiotic resistant bacteria and genes: A review of interfacial chemical in advanced oxidation processes

As a kind of novel and persistent environmental pollutants, antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been frequently detected in different aquatic environment, posing potential risks to public health and ecosystems, resulting in a biosecurity issue that cannot be ignored. Therefore, in order to control the spread of antibiotic resistance in the environment, advanced oxidation technology (such as Fenton-like, photocatalysis, electrocatalysis) has become an effective weapon for inactivating and eliminating ARB and ARGs. However, in the process of advanced oxidation technology, studying and regulating catalytic active sites at the molecular level and studying the adsorption and surface oxidation reactions between catalysts and ARGs can achieve in-depth exploration of the mechanism of ARGs removal. This review systematically reveals the catalytic sites and related mechanisms of catalytic antagonistic genes in different advanced oxidation processes (AOPs) systems. We also summarize the removal mechanism of ARGs and how to reduce the spread of ARGs in the environment through combining a variety of characterization methods. Importantly, the potential of various catalysts for removing ARGs in practical applications has also been recognized, providing a promising approach for the deep purification of wastewater treatment plants.

Design and application of gel coagulation-spontaneous flotation integrated process in water treatment: "Clouds in water"

The gel coagulation-spontaneous flotation (GCSF) process designed in this paper mainly rely on dissolved gas in water rather than auxiliary gas equipment to achieve spontaneous flotation. Compared with the traditional coagulation-dissolved air flotation method, GCSF has more stable flotation efficiency and shorter operation cycle under conventional hydraulic conditions. In this study, the GCSF scheme was applied for surface water treatment, and its operating efficiency, mechanism of action, and environmental implications were explored systematically. The results illustrate that the dosage ratio of sodium alginate (SA) to aluminum sulfate (AS) should be controlled in the range of approximately 1.5:1-2.5:1, and SA should be added 15∼120 s before AS during the coagulation process. Under these conditions, the adsorption cross-linking between SA and Al3+ promoted the generation of gel flocs and effectively encapsulated the dissolved gasses, thereby achieving a stable spontaneous flotation process and 80%-95% removal of pollutants. The purification efficiency of GCSF was positively correlated with pH 4-9, which was attributed to the enhanced hydrophobicity of the chains of organic polymer groups. The residual SA and aluminum concentration in effluent were lower than 1 and 0.05 mg/L, respectively, which guarantee the ecological security of GCSF application. In addition, the results of density functional theory calculations revealed that -OH and -AlO6 in cross-linked flocs could adsorb dissolved oxygen synergistically, while -OH combined with oxygen had a stronger binding energy and stable adsorption.

Effectively facilitating the degradation of chloramphenicol by the synergism of Shewanella oneidensis MR-1 and the metal-organic framework

Electroactive bacteria (EAB) and metal oxides are capable of synergistically removing chloramphenicol (CAP). However, the effects of redox-active metal-organic frameworks (MOFs) on CAP degradation with EAB are not yet known. This study investigated the synergism of iron-based MOFs (Fe-MIL-101) and Shewanella oneidensis MR-1 on CAP degradation. 0.5 g/L Fe-MIL-101 with more possible active sites led to a three-fold higher CAP removal rate in the synergistic system with MR-1 (initial bacterial concentration of 0.2 at OD₆₀₀), and showed a superior catalytic effect than exogenously added Fe(III)/Fe(II) or magnetite. Mass spectrometry revealed that CAP was transformed into smaller molecular weight and less toxic metabolites in cultures. Transcriptomic analysis showed that Fe-MIL-101 enhanced the expression of genes related to nitro and chlorinated contaminants degradation. Additionally, genes encoding hydrogenases and c-type cytochromes associated with extracellular electron transfer were significantly upregulated, which may contribute to the simultaneous bioreduction of CAP both intracellularly and extracellularly. These results indicated that Fe-MIL-101 can be used as a catalyst to synergize with EAB to effectively facilitate CAP degradation, which might shed new light on the application in the in situ bioremediation of antibiotic-contaminated environments.

Natural N-Doped Carbon Quantum Dots Derived from Straw and Adhered onto TiO2 Nanospheres for Enhancing the Removal of Antibiotics and Resistance Genes

Antibiotics and antibiotic resistance genes (ARGs) are emerging environmental contaminants. TiO₂ photocatalytic degradation has been proved an important removal technique, but its photocatalytic ability needs be improved. In our work, natural N-doped carbon quantum dots (N-SCQDs) were extracted from hydrothermal carbonization waste liquid of straw and were attached onto TiO₂ nanospheres for remediating antibiotics [sulfadiazine (SA)] and ARGs (sul1, sul2, and intl1). The maximum SA reduction rates were close to 100%, and the ARG reduction rates were 52.91-83.52%/lg10 (sul1), 32.10-68.23%/lg10 (sul2), and 46.29-76.55%/lg10 (inlt1). The temperature of the straw derivatives would influence their photoelectric properties. N-SCQDs@TiO₂ expands the application range of a novel potential high-efficiency degradation catalyst and offers a new way of hydrothermal carbonization waste liquid of agricultural waste.

Ferrate modified carbon felt as excellent heterogeneous electro-Fenton cathode for chloramphenicol degradation

In this study, a novel and efficient heterogeneous electro-Fenton (EF) process with a potassium ferrate (K₂FeO₄) modified carbon felt (Fe-CF) cathode was developed for chloramphenicol (CAP) removal. The catalytic activity was assessed by the comparison of different systems and the effects of multiple operating parameters (K₂FeO₄ dosage, initial solution pH, applied current) and co-existing constituents. Results indicated that the Fe-CF cathode exhibited excellent performance for CAP degradation (almost 100% removal efficiency within 60 min) over a wide range of pH (pH 3-9) during heterogeneous EF ascribed to the synergistic effect of embedded iron species and porous graphitic carbon structure and effective utilization of the in-situ generated H₂O₂. Moreover, the Fe-CF cathode possessed good recyclability with low metal leaching (98.2% CAP removal efficiency after reused for 5 times) and outstanding real water application performance. The ∙OH and O₂∙^- were responsible for CAP degradation, while ∙OH played a main role. Moreover, the toxicity evaluation by E. coli growth experiments demonstrated an efficient toxicity reduction in this system. Overall, a novel heterogeneous EF functional cathode with superior performance was fabricated via a green, low-cost one-step method, which shows promising application potential for actual wastewater treatment.

Rheological characterization of biofouling layers developing in nanofiltration processes：macroscale rheological properties of biofouling layer and micro fluid field

Nanofiltration (NF) membrane promotes the rapid development of reclaimed water treatment technology. Biofouling significantly limits NF membranes' performance in the case of wastewater treatment. The rheological characteristics of NF biofouling layer and the microfluid field on the vicinity of membrane surface determine the strategies for alleviating biofouling. Here, we tested the biofouling layer generated on NF in a parallel plate rheometer operated in oscillation and stable shear mode, along with shear stress calculation using computational fluid dynamic simulations on the membrane surface. Results indicated that the biofouling layer was typical viscoelastic material, and the yield stress exhibited shear thinning behavior. The biofouling layer tended to show elasticity during long-term operation, and with higher COD content formed, showed stronger elasticity, larger viscosity, and yield stress. Compared with the shear stress on the membrane surface obtained using numerical simulation (0.57 Pa~1.22 Pa), the yield stress (0.59 Pa~266.98 Pa) of NF biofouling layer was relatively large. Our results suggest that the shear stress generated by water flow may not effectively cause formed biofouling layer shedding. The research will provide theoretical and technical support for biofouling control in NF membrane systems and can be applied in advanced wastewater treatment and reclamation processes.

Responses of microbial community and antibiotic resistance genes to co-existence of chloramphenicol and salinity

In recent years, the risk from environmental pollution caused by chloramphenicol (CAP) has emerged as a serious concern worldwide, especially for the co-selection of antibiotic resistance microorganisms simultaneously exposed to CAP and salts. In this study, the multistage contact oxidation reactor (MCOR) was employed for the first time to treat the CAP wastewater under the co-existence of CAP (10-80 mg/L) and salinity (0-30 g/L NaCl). The CAP removal efficiency reached 91.7% under the co-existence of 30 mg/L CAP and 10 g/L NaCl in the influent, but it fluctuated around 60% with the increase of CAP concentration and salinity. Trichococcus and Lactococcus were the major contributors to the CAP and salinity shock loads. Furthermore, the elevated CAP and salinity selection pressures inhibited the spread of CAP efflux pump genes, including cmlA, tetC, and floR, and significantly affected the composition and abundance of antibiotic resistance genes (ARGs). As the potential hosts of CAP resistance genes, Acinetobacter, Enterococcus, and unclassified_d_Bacteria developed resistance against high osmotic pressure and antibiotic environment using the efflux pump mechanism. The results also revealed that shifting of potential host bacteria significantly contributed to the change in ARGs. Overall, the co-existence of CAP and salinity promoted the enrichment of core genera Trichococcus and Lactococcus; however, they inhibited the proliferation of ARGs. KEY POINTS: • Trichococcus and Lactococcus were the core bacteria related to CAP biodegradation • Co-existence of CAP and salinity inhibited proliferation of cmlA, tetC, and floR • The microorganism resisted the CAP using the efflux pump mechanism.

Sustainable adsorbents for the removal of pharmaceuticals from wastewater: A review

Over the previous three decades, the worldwide use of pharmaceuticals has surged by more than 2.5 times. Although being considered essential to save many lives, pharmaceuticals have also emerged as a large source of complex environmental contaminants in recent decades. Consequently, the pharmaceuticals and their breakdown products are ending up into the water bodies thus progressively contaminating them and the surrounding environments. Based on recent studies concentrations in water sources are typically >0.1 μg/l and the concentration in treated water is typically >0.05 μg/l. These pharma drugs are removed from aquatic systems by processes such as oxidation, Ultraviolet degradation, reverse osmosis and nano-filtration. However, hazardous sludge creation, incomplete removal, expensive capital and operating costs, and the need for professional operating and maintenance personnel have all limited the economic sustainability of these systems. As a result, the presence of pharmaceuticals in water necessitates even more advanced technologies of purification to harvest clean water, yet present approaches are constrained by their high costs, low reusability, and disposal issues. Here, we review sustainable adsorbents for the removal of pharmaceuticals from wastewater. In this comprehensive review, an evaluation of water contamination caused by pharmaceutical compounds is discussed. An overview of current research on the employment of sustainable adsorbents for the removal of the major pharmaceuticals prevalent in water sources. Numerous aspects of high adsorption efficiencies of these pharmaceutical compounds with such sustainable adsorbents were observed; however, other factors, such as adsorbent regeneration and cost evaluation, must be taken into account in order to assess the true applicability of adsorbents.