Adsorption and desorption of antiviral drugs (ritonavir and lopinavir) on sewage sludges as a potential environmental risk

Exploring the influence of invasive weed biochar on the sorption and dissipation dynamics of imazethapyr in sandy loam soil

The management of invasive weeds on both arable and non-arable land is a vast challenge. Converting these invasive weeds into biochar and using them to control the fate of herbicides in soil could be an effective strategy within the concept of turning waste into a wealth product. In this study, the fate of imazethapyr (IMZ), a commonly used herbicide in various crops, was investigated by introducing such weeds as biochar, i.e., Parthenium hysterophorus (PB) and Lantana camara (LB) in sandy loam soil. In terms of kinetics, the pseudo-second order (PSO) model provided the best fit for both biochar-mixed soils. More IMZ was sorbed onto LB-mixed soil compared to PB-mixed soil. When compared to the control (no biochar), both PB and LB biochars (at concentrations of 0.2% and 0.5%) increased IMZ adsorption, although the extent of this effect varied depending on the dosage and type of biochar. The Freundlich adsorption isotherm provided a satisfactory explanation for IMZ adsorption in soil/soil mixed with biochar, with the adsorption process exhibiting high nonlinearity. The values of Gibb's free energy change (ΔG) were negative for both adsorption and desorption in soil/soil mixed with biochar, indicating that sorption was exothermic and spontaneous. Both types of biochar significantly affect IMZ dissipation, with higher degradation observed in LB-amended soil compared to PB-amended soil. Hence, the findings suggest that the preparation of biochar from invasive weeds and its utilization for managing the fate of herbicides can effectively reduce the residual toxicity of IMZ in treated agroecosystems in tropical and subtropical regions.

Reuse of polymeric waste for the treatment of marine water polluted by diesel

Accidental diesel spills can occur in marine environments such as harbors, leading to adverse effects on the environmental compartment and humans. This study proposes the surgical mask as an affordable and sustainable adsorbent for the remediation of diesel-contaminated seawater to cope with the polymeric waste generated monthly in hospital facilities. This approach can also be helpful considering a possible future pandemic, alleviating the pressure on the waste management system by avoiding improper mask incineration and landfilling, as instead occurred during the previous COVID-19. Batch adsorption-desorption experiments revealed a complete diesel removal from seawater after 120 min with the intact laceless mask, which showed an adsorption capacity of up to 3.43 g/g. The adsorption curve was better predicted via Weber and Morris's kinetic (R2 = 0.876) and, in general, with Temkin isotherm (R2 = 0.965-0.996) probably due to the occurrence of chemisorption with intraparticle diffusion as one of the rates-determining steps. A hysteresis index of 0.23-0.36 was obtained from the desorption isotherms, suggesting that diesel adsorption onto surgical masks was faster than the desorption mechanism. Also, the effect of pH, ionic strength and temperature on diesel adsorption was examined. The results from the reusability tests indicated that the surgical mask can be regenerated for 5 consecutive cycles while decreasing the adsorption capacity by only approximately 11%.

Synergistic approach for synthesis of functionalized biochar for efficient adsorption of Lopinavir from polluted water

The COVID-19 pandemic has led to a significant increase in antibiotic consumption, along with a 70% rise in antiviral drug concentrations in aquatic ecosystems. For the effective adsorption of antibiotics, biochar was modified by incorporating layered double hydroxide (LDH) through hydrothermal method. The results showed that LDH provides additional hydroxyl groups, positive surface charges and ion exchange. Whereas biochar component provides a larger specific surface area (467.8 m2/g). Batch adsorption experiments of biochar @ layered double hydroxide (BC@LDH) showed enhanced adsorption performance (832.9 mg/g), compared to pristine LDH (420.3 mg/g) and unmodified biochar (548.5 mg/g). Adsorption data were best interpreted (R2 = 0.99) by pseudo second order, Freundlich, and Temkin isotherm models. Adsorption was a synergism of LDH and biochar physiochemical properties, whereas pore-filling was the primary mechanism. The recyclability of BC@LDH confirmed its good structural stability. This study introduces a sustainable and efficient method for synthesizing a versatile adsorbent with superior antibiotic removal.

Competitive adsorption of acetaminophen and caffeine onto activated Tingui biochar: characterization, modeling, and mechanisms

Tingui biochar (TB) activated with potassium hydroxide (TB-KOH) was synthesized in the present study. The adsorption capacity of TB-KOH was evaluated for the removal of acetaminophen and caffeine in monocomponent and bicomponent solutions. As a result, the study of the TB-KOH characterization as well as the adsorption kinetics, isotherm, thermodynamics, and a suggestion of the global adsorption mechanism are presented. TB-KOH was characterized through physical-chemical analysis to understand its surface morphology and how it contributes to the adsorption of these drugs. Furthermore, modelling using advanced statistical physical models was performed to describe how acetaminophen and caffeine molecules are adsorbed in the active sites of TB-KOH. Through the characterizations, it was observed that the activation with KOH contributed to the development of porosity and functional groups (-OH, C-O, and C = O) on the surface of TB. The monocomponent adsorption equilibrium was reached in 90 min with a maximum adsorption capacity of 424.7 and 350.8 mg g-1 for acetaminophen and caffeine, respectively. For the bicomponent solution adsorption, the maximum adsorption capacity was 199.4 and 297.5 mg g-1 for acetaminophen and caffeine, respectively. The isotherm data was best fitted to the Sips model, and the thermodynamic study indicated that acetaminophen removal was endothermic, while caffeine removal was exothermic. The mechanism of adsorption of acetaminophen and caffeine by TB-KOH was described by the involvement of hydrogen bonds and π-π interactions between the surface of TB-KOH and the molecules of the contaminants.

In situ synthesis of multivariant zeolitic tetrazolate imidazole frameworks (ZTIFs) with uncoordinated N-heteroatom sites for efficient adsorption of antiviral drugs

The current outbreak of the coronavirus (COVID-19) pandemic has significantly increased the global usage of antiviral drugs (AVDs), leading to higher concentrations of antibiotics in water pollution. To address this current issue, a new kind of adsorbent named isostructural zeolitic tetrazolate imidazolate frameworks (ZTIFs) were synthesized by combining imidazole and tetrazolates into one self-assembly approach by adjusting pores and stability of frameworks. The incorporation of imidazole ligand progressively increased the stability of frameworks. Furthermore, increasing the content of tetrazolate ligand greatly improved the adsorption performance due to N-rich sites by increasing the pore size. The obtained adsorbent composite exhibits macroporous structure up to 53.05 nm with excellent structural stability. Owing to their macropores and highly exposed active sites, the synthesized ZTIFs exhibit the maximum adsorption capacity for oseltamivir (OT) and ritonavir (RT) of 585.2 mg/g and 435.8 mg/g, respectively. Moreover, the adsorption uptake and saturation process were rapid compared to simple MOF. Within 20 min, both pollutants achieved equilibrium. The adsorption isotherms were best interpreted by Pseudo second order kinetics. The adsorption of AVDs on ZTIFs was spontaneous, exothermic, and thermodynamically feasible. The DFT calculations and characterization results after adsorption demonstrate that π-π interaction, pore filling, surface complexation, and electrostatic interaction were the primary features of the adsorption mechanism. The prepared ZTIFs composite exhibits high chemical, mechanical and thermal stability and can be recycled multiple times without destroying its morphology and structure. The adsorbent regeneration for several cycles impacted the operational cost and the eco-friendly characteristic of the process.

Dose-response and type-dependent effects of antiviral drugs in anaerobic digestion of waste-activated sludge for biogas production

In the context of the COVID-19 pandemic, antiviral drugs (AVDs) were heavily excreted into wastewater and subsequently enriched in sewage sludge due to their widespread use. The potential ecological risks of AVDs have attracted increasing attention, but information on the effects of AVDs on sludge anaerobic digestion (AD) is limited. In this study, two typical AVDs (lamivudine and ritonavir) were selected to investigate the responses of AD to AVDs by biochemical methane potential tests. The results indicated that the effects of AVDs on methane production from sludge AD were dose- and type-dependent. The increased ritonavir concentration (0.05-50 mg/kg TS) contributed to an 11.27-49.43% increase in methane production compared with the control. However, methane production was significantly decreased at high lamivudine doses (50 mg/kg TS). Correspondingly, bacteria related to acidification were affected when exposed to lamivudine and ritonavir. Acetoclastic and hydrotropic methanogens were inhibited at a high lamivudine dose, while ritonavir enriched methylotrophic and hydrotropic methanogens. Based on the analysis of intermediate metabolites, the inhibition of lamivudine and the promotion of ritonavir on acidification and methanation were confirmed. In addition, the existence of AVDs could affect sludge properties. Sludge solubilization was inhibited when exposed to lamivudine and enhanced by ritonavir, perhaps caused by their different structures and physicochemical properties. Moreover, lamivudine and ritonavir could be partially degraded by AD, but 50.2-68.8% of AVDs remained in digested sludge, implying environmental risks.

Effect of soil amendments on the sorption behavior of atrazine in sandy loam soil

The sorption behavior of pesticides applied during cultivation of crops is affected by amendments such as farm yard manure (FYM) and vermicompost (VC) during land preparation. Among pesticides, atrazine, a widely used herbicide in many crops, was analyzed for its kinetics and sorption behavior through the addition of FYM and VC in sandy loam soil. The pseudo-second-order (PSO) model best fit the kinetics results in the recommended dose of FYM and VC mixed soil. More atrazine was sorbed onto VC mixed soil than FYM mixed soil. In comparison to control (no amendment), both FYM and VC (1, 1.5, and 2%) increased atrazine adsorption, but the effect varied with dosage and type of amendment. The Freundlich adsorption isotherm adequately explained atrazine adsorption in soil/soil + (FYM/VC) mixtures, and the adsorption was highly nonlinear. The values of Gibb's free energy change (ΔG) were negative for both adsorption and desorption in soil/soil + (FYM/VC) mixtures, suggesting sorption was exothermic and spontaneous in nature. The results revealed that the application of amendments used by farmers interferes the availability, mobility, and infiltration of atrazine in the soil. Therefore, the findings of this study suggest that amendments such as FYM and VC can be effectively used to minimize the residual toxicity of atrazine-treated ago-ecosystems in tropical and sub-tropical regions.

COVID-19 related antiviral drugs are less adsorbable on sediment under alkaline and high cation conditions

The COVID-19 pandemic resulted in unprecedented usage and elevated environmental concentrations of antiviral drugs. However, very limited studies have reported their sorption characteristics on environmental matrices. This study investigated the sorption of six COVID-19 related antivirals on Taihu Lake sediment with varied aqueous chemistry. Results showed that the sorption isotherms for arbidol (ABD), oseltamivir (OTV), and ritonavir (RTV) were linear, while the Freundlich model was the best-fit for ribavirin (RBV) and the Langmuir model for favipiravir (FPV) and remdesivir (RDV). Their distribution coefficient, K_d, varied between 5.051 L/kg to 248.6 L/kg with the sorption capacities ranked as FPV > RDV > ABD > RTV > OTV > RBV. Alkaline conditions (pH 9) and elevated cation strength (0.05 M to 0.1 M) decreased the sorption capacities of the sediment for these drugs. Thermodynamic analysis revealed that the spontaneous sorption of RDV, ABD, and RTV was between physisorption and chemisorption while FPV, RBV, and OTV were mainly physisorption. Functional groups related to hydrogen bonds, π - π interaction, and surface complexation were implicated in the sorption processes. These findings enhance our understanding about the environmental fate of COVID-19 related antivirals and provide basic data for predicting their distribution and risk in the environment.

Sorption and desorption of epiandrosterone and cortisol on sewage sludge: Comparison to aquatic sediment

Steroids have aroused global concern due to their potent endocrine-disrupting effects. Androgens and glucocorticoids are the most abundant species in sewage; however, our understanding of their fate and risks from the source to environmental sinks remains elusive. This study compared the sorption-desorption characteristics of epiandrosterone (EADR) and cortisol (CRL) in sewage sludge and aquatic sediment, and the surface and molecular interactions were tentatively investigated through infrared spectroscopy and the fluorescence excitation-emission matrix. The results showed that the sorption capacities of EADR and CRL in the sludge were 4015 L/kg and 81.17 L/kg, respectively, which are much larger than those in the sediment (EADR: 78.77 L/kg, CRL: 6.39 L/kg); 0.02%-1.2% of EADR and 0.2%-14.5% of CRL could be desorbed from sludge, while the desorption ratios were even lower in the sediment. The high organic content in the sludge might contribute to the larger sorption capacities, while the weak interaction between steroids and organic matter could lead to larger desorption potential. The sediment contained more mineral content and featured a larger specific surface area, which could be responsible for the greater desorption hysteresis for EADR and CRL. These results will help to better understand the potential risk of sewage sludge-associated steroids and their distribution in sediment-water systems.

Radially aligned hierarchical N-doped porous carbon beads derived from oil-sand asphaltene for long-life water filtration and wastewater treatment

The application of waste-derived highly efficient adsorbent for organic pollutants removal from water and wastewater is presented. Highly porous carbon beads with radially aligned macrochannels were prepared from asphaltene. Well-ordered inwardly aligned macrovoids favored solute diffusion and maximized the liquid accommodation capacity. A further N-doping could modulate the sorbent hydrophilicity leading to an outstanding absorption performance for a range of organic solvents and oily chemicals. N-doped carbon beads were effective sorbents of lopinavir (LNV) and ritonavir (RNV) from water and wastewater. The process of sorption was fast, and the highest removal was noted for RNV than LPV. N-doping favored LNV and RNV adsorption due to the increased porous structure of N-doped asphaltene beads. The chemisorption of both LPV and RTV was a rate-limiting step. The presence of co-pollutants in treated wastewater enhanced LPV and RNV removal and an up to 470 % increase was noted. The presence of LPV or RTV in distilled water was not toxic to Aliivibrio fischeri or even can stimulate their growth. However, after the adsorption process, the solution of RTV reduced its toxicity significantly and the final solution was not toxic. The opposite effect was noted for LPV. Given the repeatability, high removal performance, and cost-effectiveness of the asphaltene-based carbon microtubes when compared to other well-known sorbents such as carbon nanotubes, they demonstrated great potential as a low-cost and effective agent for long-life water filtration and wastewater treatment.

Chemical modification of biochars as a method to improve its surface properties and efficiency in removing xenobiotics from aqueous media

Biochar (BC) is a carbonaceous material produced by pyrolysis of biomass, applied in various areas such as water purification, fuel production, soil amendment, etc. Many types of BC are characterized by insufficient textural parameters or poor surface chemistry, and hence by low adsorption capacity. This makes innovative chemical methods increasing BC ability to remove xenobiotics from aquatic environments highly needed. Many of them have already been described in the literature. This review presents them in detail and evaluates their effectiveness in improving textural parameters, surface chemistry, and adsorption capacity of BC.

A sustainable approach for the removal methods and analytical determination methods of antiviral drugs from water/wastewater: A review

In the last years, antiviral drugs especially used for the treatment of COVID-19 have been considered emerging contaminants because of their continuous occurrence and persistence in water/wastewater even at low concentrations. Furthermore, as compared to antiviral drugs, their metabolites and transformation products of these pharmaceuticals are more persistent in the environment. They have been found in environmental matrices all over the world, demonstrating that conventional treatment technologies are unsuccessful for removing them from water/wastewater. Several approaches for degrading/removing antiviral drugs have been studied to avoid this contamination. In this study, the present level of knowledge on the input sources, occurrence, determination methods and, especially, the degradation and removal methods of antiviral drugs are discussed in water/wastewater. Different removal methods, such as conventional treatment methods (i.e. activated sludge), advanced oxidation processes (AOPs), adsorption, membrane processes, and combined processes, were evaluated. In addition, the antiviral drugs and these metabolites, as well as the transformation products created as a result of treatment, were examined. Future perspectives for removing antiviral drugs, their metabolites, and transformation products were also considered.

Enhanced removal of Eriochrome Black T from water using biochar/layered double hydroxide/chitosan hybrid composite: Performance evaluation and optimization using BBD-RSM approach

In this research work, a novel hybrid composite consisting of biochar (B), layered double hydroxide (CuFe) and chitosan (CS) (B-CuFe-CS) was produced using an ultrasonication-assisted co-precipitation method. The resultant composite was employed for adsorptive removal of Eriochrome black T (EBT) from water. Physicochemical characterization indicated that the B-CuFe-CS containing 10 wt % CS exhibited a heterogeneous structure with better crystallographic and textural characteristics. The B-CuFe-CS with abundant surface functionalities (-CO, -C-O, -OH, -NO_3, and MMO), facilitates faster and enhanced removal of the EBT. The kinetic results showed better fitting to the pseudo-second order model, and equilibrium was achieved within 30 min. Equilibrium data was well explained by Langmuir and Redlich Peterson isotherm models (R² > 0.98), indicating the EBT removal onto B-CuFe-CS followed monolayer adsorption. The maximum adsorption capacity was 806.4 mg/g, which was higher than pristine B-CuFe (476.19 mg/g) and many other adsorbents. The spectroscopic analysis (FTIR and XPS) and experimental results suggested that EBT adsorption is mainly governed by electrostatic, chemical and anion-exchange interactions. It is evident from these results that coupling B-CuFe composite with bio-filler (chitosan) resulted in an efficient bio-adsorbent to effectively purify dye-contaminated water streams.