A review of heavy metals inhibitory effects in the process of anaerobic ammonium oxidation

The inhibition of anammox system under Cu2 + stress and mechanisms of biochar-mediated recovery

Copper (Cu2+)-containing wastewater has proven difficult to effectively treat using the anammox process. In this study, the nitrogen removal efficiency (NRE), sludge characteristics, microbial community and recovery mechanisms of biochar-mediated anammox under Cu2+ stress were elucidated. At a Cu2+stress of 5 mg/L, a 73.52 % decrease in NRE (from 99 % to 25.48 %) was observed within the control setup (no biochar). The highest average NH4+-N removal for 36.28 % was observed at a reduced Cu2+ concentration of 3 mg/L with biochar addition compared to only 16.63 % in control reactor. The differences in the protein/polysaccharide (PN/PS) content in sludge from different biochar systems under long-term Cu2+ stress was a key factor influencing overall nitrogen removal performance, with the sludge predominantly displaying tightly bound extracellular polymeric substances (TB-EPS). The relative abundance of Candidatus Brocadia increased from 2.61 % to 15.28 % in the nitric acid-modified bamboo biochar group following cessation Cu2+ addition, while the control group only recovered to 0.76 %. The Cu2+ inhibition alleviation effect of biochar, facilitated via enhanced EPS secretion and selective proliferation of key functional microorganisms, has thus been demonstrated.

Leveraging big data to elucidate the impact of heavy metal nanoparticles on anammox processes in wastewater treatment

Anammox is a highly efficient nitrogen removal process, yet the effects of metal/metal-oxide nanoparticles (M/MONPs) on these systems remain underexplored. This study investigates the impact of various M/MONPs on the nitrogen removal rate (NRR). Pearson correlation analysis and statistical evaluation indicates that silver and copper oxide nanoparticles exhibit the highest inhibitory effect, with an inhibition rate of 83.4 % and 73.7 %, respectively. Furthermore, Machine learning models, particularly extreme gradient boost (XGBoost), demonstrate superior performance, with R2 values exceeding 0.91. SHapley Additive exPlanations (SHAP) feature importance analysis highlighted nanoparticles concentration, influent ammonia nitrogen concentration as the most influential factors. Additionally, Partial Dependence Plots (PDP) analysis of key features provided further clarity on the optimal ranges for these critical variables. The present study provides a novel predictive methodology and optimization strategies for enhancing the NRR of anammox system under M/MONPs stress, informed by comprehensive big data analysis.

Global trends and prospects in research on heavy metal pollution at contaminated sites

Soil contamination by heavy metals is a global environmental challenge, poses a serious risk to plant life, human health, and global food supply. In recent years, advanced and effective remediation strategies for heavy metal-contaminated soils have developed rapidly, and a systematic summarization of this progress is important. Based on 2822 bibliographic data (2014-2023) acquired from the Web of Science Core Collection, the research status, hotspots and trends of heavy metal-contaminated sites worldwide had been synthetically analyzed in scientometrics. The results showed that China, India, and the USA were the most active countries in related research, and the main research subjects were the assessment of contaminated sites and remediation methods. The keywords showed 3 co-occurrence clusters, focusing on site characterization, phytoremediation and physical-chemical remediation. The time zone view shows a multidisciplinary amalgamation tendency particular in methods such as using artificial intelligence and remote sensing to predict spatial distribution and migration characteristics of heavy metals. Regarding the types of contaminated sites, the most frequently studied are mining sites and industrial waste sites. Among heavy metals, Cd, Pb, and Zn are the most commonly studied pollutants. The heavy metal contamination in soil, ranked by the geo-accumulation index, is as follows: Cd (5.91) > Pb (4.12) > Zn (3.73) > Cu (2.37) > Cr (1.85) > Ni (1.34). In terms of remediation technologies, the frequency of utilization is ranked as follows: phytoremediation > microbial remediation > soil washing > electrokinetic remediation > oxidation reduction > solidification/stabilization > thermal desorption > soil replacement. Additionally, phytoremediation and soil washing are the most effective technologies for removing Cd, Pb, and Zn. The insights derived from this study contribute to a deeper understanding of the state-of-the-art in this field and help to develop/select applicable methods for the effective remediation of heavy metal-contaminated sites.

Distinct response of nitrogen metabolism to exogenous cadmium (Cd) in river sediments with and without Cd contamination history

The role of metal resistance on nitrogen metabolism function and community resilience against Cd is important for elucidating the evolutionary dynamics of key ecological functions in river ecosystems. In this study, the response of nitrogen transforming function to Cd exposure in river sediments from the Yangtze River Basin with varying levels of heavy metal contamination history (Cd-contaminated and Cd-free sediments) was compared to understand how Cd influenced nitrogen metabolism under varying metal resistance conditions. The results showed that chronic and persistent Cd pollution of sediments caused an elevation of transport efflux metal resistance genes (MRGs) and a reduction in the uptake MRGs, leading to a stronger tolerance to Cd for Cd-contaminated sediment than Cd-free ones. Specifically, denitrification, anaerobic ammonium oxidation (anammox) and dissimilatory nitrate reduction to ammonium (DNRA) respectively responded to Cd through different mechanisms. Exogenous Cd (5-100 mg kg-1) influenced denitrification rates (-70 %-100 % deviation to control group) by regulating key genera (Thiobacillus, Magnetospirillum, Sideroxydans etc.) and gene clusters for denitrification. Both adaptive nature of anammox bacteria and co-regulation of key genera (Candidatus_Scalindua, Candidatus_Jettenia, Planctomyces etc.) and gene hzsA were drivers of differential responses in sediments from various contamination history. Environmental factors rather than contamination history, key genera or genes were probably critical ones determining Cd-resistance in DNRA, being more tolerant to Cd in sediments with higher TOC and NH4+. Stimulation of N2O reduction process (genera Gemmatimonas and Gemmatirosa and genes nosZ) in Cd-contaminated sediments by exogenous Cd lowered N2O emission risk, whereas the reverse was true for Cd-free sediments. These results enrich our understanding about the linkages among MRGs and nitrogen reduction functions in river.

High lead-tolerant mutant Bacillus tropicus AT31-1 from rhizosphere soil of Pu-erh and its remediation mechanism

In this study, we successfully generated the mutant strain Bacillus tropicus AT31-1 from AT31 through atmospheric room-temperature plasma mutagenesis. This mutant strain AT31-1 demonstrated an impressive 48.6 % removal efficiency in 400 mg/L lead medium. Comparative genomic analysis showed that the mutant strain AT31-1 had three mutation sites, which affect the efflux RND transporter permease subunit, the response regulator transcription factor, and a gene with unknown function. The transcriptional analysis showed a notable upregulation in the expression of 283 genes in AT31-1 as lead concentrations increased from 0 to 200 mg/L and then to 400 mg/L, which include zinc-transporting ATPase, ferrous iron transport protein B, NADH dehydrogenase, and others. The Gene ontology function of the peptide metabolic process, along with the KEGG pathway of carbon metabolism were identified as closely linked to the extreme lead tolerance of AT31-1. This study presents novel insights into the lead tolerance mechanisms of bacteria.

Organic acids released by submerged macrophytes with damaged leaves alter the denitrification microbial community in rhizosphere

Submerged macrophytes have important impacts on the denitrification and anaerobic ammonia-oxidizing (anammox) processes. Leaf damage in these plants probably changes the rhizosphere environment, affecting organic acid release and denitrifying bacteria. However, there is a lack of comprehensive understanding of the specific changes. This study investigated these changes in the rhizosphere of Potamogeton crispus with four degrees of leaf excision. When 0 %, 30 %, 50 % and 70 % of leaves were excised, the concentrations of total organic acid were 31.45, 32.67, 38.26, and 35.16 mg/L, respectively. The abundances of nirS-type denitrifying bacteria were 2.10 × 1010, 1.59 × 1010, 2.54 × 1010, and 4.67 × 1010 copies/g dry sediment, respectively. The abundances of anammox bacteria were 7.58 × 109, 4.59 × 109, 3.81 × 109, and 3.90 × 109 copies/g dry sediment, respectively. The concentration of total organic acids and the abundance of two denitrification microorganisms in the rhizosphere zone were higher than those in the root zone and non-rhizosphere zone. With increasing leaf damage, the number of OTUs in the Pseudomonas genus of nirS-type denitrifying bacteria first increased and then decreased, while that of the Thauera genus was relatively stable. The overall increase in the OTU number of anammox bacteria indicated that leaf damage promotes root exudates release, thereby leading to an increase in their diversity. The co-occurrence network revealed that the two denitrification microorganisms had about 60.52 % positive connections in rhizosphere while 64.73 % negative connections in non-rhizosphere. The abundance and community composition of both denitrification microorganisms were positively correlated with the concentrations of various substances such as oxalic acid, succinic acid, total organic acids and NO2--N. These findings demonstrate that submerged plant damage has significantly impacts on the structure of denitrification microbial community in the rhizosphere, which may alter the nitrogen cycling process in the deposit sediment. SYNOPSIS: This study reveals leaf damage of macrophyte changed the rhizosphere denitrification microbial community, which is helpful to further understand the process of nitrogen cycle in water.

Inhibition effect of Cu(II) on nitrogen removal in anammox-denitrification couple system

Due to the wide application in industries, copper can be detected in some nitrogen-rich wastewater. In this research, short-term and long-term experiments were conducted to explore the effects of Cu(II) on the anammox-denitrification couple system. It concluded that the half inhibition concentration (IC50) of Cu(II) was 35.54 mg/L. The system in reactor could tolerate low concentrations of Cu(II) (≤5 mg/L), while the total nitrogen removal efficiency decreased from 93 % to 33 % under 10 mg/L of Cu(II). After 45 days exposure to Cu(II) (1-10 mg/L), 14.54 mg/g SS copper accumulated in the sludge, which largely inhibited the microbial activity. More extracellular polymeric substances (EPS) were secreted to defend against copper toxicity. Proteobacteria (19.18 %-44.04 %) was the dominant phylum and showed excellent tolerance and adaptability to Cu(II). The dominant anammox bacteria, Candidatus_Brocadia, was slightly enhanced under low concentrations of Cu(II), but was highly inhibited under 10 mg/L of Cu(II). PICRUSt2 results showed that some metabolic activities were suppressed under the exposure of copper while defensive responses were also induced. Metabolic disorders eventually led to the death of some microbes, resulting in unrecoverable deterioration in microbial activity. Overall, this study explores the effect of Cu(II) on the anammox-denitrification process and provides a possible inhibition mechanism.

Unveiling long-term combined effect of salinity and Lead(II) on anammox activity and microbial community dynamics in saline wastewater treatment

The study assessed the effect of salinity and lead (Pb(II)) on the anammox sludge for nitrogen removal from saline wastewater. Results showed decreased nitrogen removal and specific anammox activity (SAA) with elevated salinity and Pb(II). SAA reduced from 541.3 ± 4.3 mg N g-1 VSS d-1 at 0.5 mg/L Pb(II) to 436.0 ± 0.2 mg N g-1 VSS d-1 at 30 g/L NaCl, further to 303.6 ± 7.1 mg N g-1 VSS d-1 under 30 g/L NaCl + 0.5 mg/L Pb(II). Notably, the combined inhibition at salinity (15-20 g/L NaCl) and Pb(II) (0.3-0.4 mg/L) exhibited synergistic effect, while higher salinity and Pb(II) aligned with independent inhibition models. Combined inhibition decreased protein/polysaccharides ratio, indicating more severe negative effect on anammox aggregation capacity. Metagenomics confirmed decreased Candidatus Kuenenia, and enhanced denitrification under elevated salinity and Pb(II) conditions. This study offers insights into anammox operation for treating saline wastewater with heavy metals.

Toxic effect of copper ions on anammox in IFFAS process filled with ZVI-10 modified carriers

The inhibitory effects of heavy metals on anammox bacteria (AnAOB) have attracted attention worldwide. However, most are conducted in activated sludge rather than biofilm systems. The toxic effect and resistance response of anammox biofilm are not predictable from those of free-living AnAOB. Zero valent iron (ZVI) has been demonstrated to enhance anammox performance, but whether ZVI can promote AnAOB resistance to heavy metal stress remains unclear. Herein, the toxic effect of copper ions (Cu(II)) on anammox in integrated floating-film activated sludge (IFFAS) process filled with 10 wt% ZVI modified carriers (R1) was investigated. Results indicated half inhibiting concentration (IC50) of Cu(II) in R1 was 9.13 mg/L, which was much higher than that in R0 filled with conventional carriers made of high density polyethylene (HDPE) (3.94 mg/L). Long-term effect of Cu(II) demonstrated that Cu(II) concentrations less than 1.0 mg/L could not inhibit anammox biofilm significantly, whereas R1 performed better anammox process than R0 under the stress of 0.1-1.0 mg/L Cu(II). The ZVI modified carriers induced more extracellular polymeric substances (EPS) to trap Cu(II) to attenuate the toxicity to AnAOB. Besides, the activities of functional enzymes related to anammox (NIR and HDH), as well as heme-c contents, were always higher in R1 than R0 regardless of the Cu(II) dosage. Candidatus Kuenenia was identified as the predominant AnAOB, which had stronger resistance to Cu(II) stress compared to other genera in the IFFAS process. Metal resistance genes (MRGs) analysis identified AnAOB induced multi-responses to resist Cu(II) stress, such as the up-regulation of copC, cutA, cutC, cutF, cueR and cueO, to synthesize more proteins with functions of copper exocytosis, conjugation and oxidation.

Biofilm reactors for the treatment of used water in space:potential, challenges, and future perspectives

Water is not only essential to sustain life on Earth, but also is a crucial resource for long-duration deep space exploration and habitation. Current systems in space rely on the resupply of water from Earth, however, as missions get longer and move farther away from Earth, resupply will no longer be a sustainable option. Thus, the development of regenerative reclamation water systems through which useable water can be recovered from "waste streams" (i.e., used waters) is sorely needed to further close the loop in space life support systems. This review presents the origin and characteristics of different used waters generated in space and discusses the intrinsic challenges of developing suitable technologies to treat such streams given the unique constrains of space exploration and habitation (e.g., different gravity conditions, size and weight limitations, compatibility with other systems, etc.). In this review, we discuss the potential use of biological systems, particularly biofilms, as possible alternatives or additions to current technologies for water reclamation and waste treatment in space. The fundamentals of biofilm reactors, their advantages and disadvantages, as well as different reactor configurations and their potential for use and challenges to be incorporated in self-sustaining and regenerative life support systems in long-duration space missions are also discussed. Furthermore, we discuss the possibility to recover value-added products (e.g., biomass, nutrients, water) from used waters and the opportunity to recycle and reuse such products as resources in other life support subsystems (e.g., habitation, waste, air, etc.).

Performance changes in the anammox process under the stress of rare-earth element Ce(III) and the evolution of microbial community and functional genes

The high Ce(III) content in ionic rare-earth tailings wastewater has hindered the application of anammox process in this field. Here, the effect of Ce(III) on the performance of anammox processes was investigated, and the evolution of microbial communities and functional genes was explored using metagenomic sequencing. The results showed that the reactor nitrogen removal rate decreased when the Ce(III) concentration reached 25 mg/L, although ammonia nitrogen removal (92.31%) and nitrogen removal efficiency (81.33%) remained at a high level; however, both showed a significant decreasing trend. The relative abundance of anammox bacteria increased continuously from P1-P5, reaching 48.81%, whereas the relative abundance of Candidatus jettenia reached 33.71% at P5, which surpassed that of Candidatus brocadia as the most abundant anammox bacteria, and further analysis of functional genes and metabolic pathways revealed that Candidatus brocadia was richer in biochemical metabolic genes, whereas Candidatus jettenia had richer efflux genes.

An Advanced Synergy of Partial Denitrification-Anammox for Optimizing Nitrogen Removal from Wastewater: A Review

Anammox is a widely adopted process for energy-efficient removal of nitrogen from wastewater, but challenges with NOB suppression and NO₃^- accumulation have led to a deeper investigation of this process. To address these issues, the synergy of partial denitrification and anammox (PD-anammox) has emerged as a promising solution for sustainable nitrogen removal in wastewater. This paper presents a comprehensive review of recent developments in the PD-anammox system, including stable performance outcomes, operational parameters, and mathematical models. The review categorizes start-up and recovery strategies for PD-anammox and examines its contributions to sustainable development goals, such as reducing N₂O emissions and saving energy. Furthermore, it suggests future trends and perspectives for improving the efficiency and integration of PD-anammox into full-scale wastewater treatment system. Overall, this review provides valuable insights into optimizing PD-anammox in wastewater treatment, highlighting the potential of simultaneous processes and the importance of improving efficiency and integration into full-scale systems.

Elucidating nitrogen removal performance and response mechanisms of anammox under heavy metal stress using big data analysis and machine learning

In this study, machine learning algorithms and big data analysis were used to decipher the nitrogen removal rate (NRR) and response mechanisms of anammox process under heavy metal stresses. Spearman algorithm and Statistical analysis revealed that Cr⁶⁺ had the strongest inhibitory effect on NRR compared to other heavy metals. The established machine learning model (extreme gradient boost) accurately predicted NRR with an accuracy greater than 99%, and the prediction error for new data points was mostly less than 20%. Additionally, the findings of feature analysis demonstrated that Cu²⁺ and Fe³⁺ had the strongest effect on the anammox process, respectively. According to the new insights from this study, Cr⁶⁺ and Cu²⁺ should be removed preferentially in anammox processes under heavy metal stress. This study revealed the feasible application of machine learning and big data analysis for NRR prediction of anammox process under heavy metal stress.

Insights into heavy metals shock on anammox systems: Cell structure-based mechanisms and new challenges

Anaerobic ammonium oxidation (anammox) as a low-carbon and energy-saving technology, has shown unique advantages in the treatment of high ammonia wastewater. However, wastewater usually contains complex heavy metals (HMs), which pose a potential risk to the stable operation of the anammox system. This review systematically re-evaluates the HMs toxicity level from the inhibition effects and the inhibition recovery process, which can provide a new reference for engineering. From the perspective of anammox cell structure (extracellular, anammoxosome membrane, anammoxosome), the mechanism of HMs effects on cellular substances and metabolism is expounded. Furthermore, the challenges and research gaps for HMs inhibition in anammox research are also discussed. The clarification of material flow, energy flow and community succession under HMs shock will help further reveal the inhibition mechanism. The development of new recovery strategies such as bio-accelerators and bio-augmentation is conductive to breaking through the engineered limitations of HMs on anammox. This review provides a new perspective on the recognition of toxicity and mechanism of HMs in the anammox process, as well as the promotion of engineering applicability.

Sidestream characteristics in water resource recovery facilities: A critical review

This review compiles information on sidestream characteristics that result from anaerobic digestion dewatering (conventional and preceded by a thermal hydrolysis process), biological and primary sludge thickening. The objective is to define a range of concentrations for the different characteristics found in literature and to confront them with the optimal operating conditions of sidestream processes for nutrient treatment or recovery. Each characteristic of sidestream (TSS, VSS, COD, N, P, Al³⁺, Ca²⁺, Cl^-, Fe^2+/3+, Mg²⁺, K⁺, Na⁺, SO₄^2-, heavy metals, micro-pollutants and pathogens) is discussed according to the water resource recovery facility configuration, wastewater characteristics and implications for the recovery of nitrogen and phosphorus based on current published knowledge on the processes implemented at full-scale. The thorough analysis of sidestream characteristics shows that anaerobic digestion sidestreams have the highest ammonium content compared to biological and primary sludge sidestreams. Phosphate content in anaerobic digestion sidestreams depends on the type of applied phosphorus treatment but is also highly dependent on precipitation reactions within the digester. Thermal Hydrolysis Process (THP) mainly impacts COD, N and alkalinity content in anaerobic digestion sidestreams. Surprisingly, the concentration of phosphate is not higher compared to conventional anaerobic digestion, thus offering more attractive recovery possibilities upstream of the digester rather than in sidestreams. All sidestream processes investigated in the present study (struvite, partial nitrification/anammox, ammonia stripping, membranes, bioelectrochemical system, electrodialysis, ion exchange system and algae production) suffer from residual TSS in sidestreams. Above a certain threshold, residual COD and ions can also deteriorate the performance of the process or the purity of the final nutrient-based product. This article also provides a list of characteristics to measure to help in the choice of a specific process.

Carrier type affects anammox community assembly, species interactions and nitrogen conversion

The impacts of carrier type on anammox community assembly, species interactions and nitrogen conversion were studied in this work. It was found that in addition to shared species with higher abundance, different carrier types recruited rare species by imposing selection pressure. Results from co-occurrence networks revealed that carrier type strongly influenced interactions between keystone species inhabiting within anammox biofilm through potentially inducing niche differences. Overall, elastic cubic sponges would lead to closer cooperation between different populations, whereas plastic hollow cylinders would trigger fiercer competition. Meanwhile, the results based on metagenomics sequencing showed carrier type significantly affected nitrogen conversion related genes abundances, and higher reads number was detected on the elastic cubic sponges. The information obtained in this work could provide some valuable information for the selection and optimization of carrier type in the anammox process.

Enhancement and mechanisms of iron-assisted anammox process

Anaerobic ammonium oxidation (anammox) is a sustainable biological nitrogen removal technology that has limited large-scale applications owing to the low cell yield and high sensitivity of anammox bacteria (AnAOB). Fortunately, iron-assisted anammox, being a highly practical method could be an effective solution. This review focused on the iron-assisted anammox process, especially on its performance and mechanisms. In this review, the effects of iron in three different forms (ionic iron, zero-valent iron and iron-containing minerals) on the performance of the anammox process were systematically reviewed and summarized, and the strengthening effects of Fe (II) seem to be more prominent. Moreover, the detailed mechanisms of iron-assisted anammox in previous researches were discussed from macro to micro perspectives. Additionally, applicable iron-assisted methods and unified strengthening mechanisms for improving the stability of nitrogen removal and shortening the start-up time of the system in anammox processes were suggested to explore in future studies. This review was intended to provide helpful information for scientific research and engineering applications of iron-assisted anammox.

Factors affecting N2O fluxes from heavy metal-contaminated mangrove soils in a subtropical estuary

A 1-year field monitoring program was carried out to observe seasonal variation in N₂O fluxes at two typical mangrove wetlands in a subtropical estuary. The soils in the island-type mangrove wetland had a higher level of heavy metal(loid) contamination and a lower level of salinity compared to the small bay-type mangrove wetland. While there was a high level of similarity in the seasonal variation pattern of N₂O fluxes between the two investigated sites with both being significantly higher in summer than in other seasons, the average of N₂O fluxes in the island-type mangrove wetland was 7.19 μg·m^-2·h^-1， which tended to be lower compared to the small bay-type mangrove wetland (15.63 μg·m^-2·h^-1). Overall, N₂O flux was closely related to soil-borne heavy metal(loid)s, showing a trend to decrease with increasing concentration of these heavy metal(loid)s. The N₂O fluxes increased with decreasing abundance of either denitrifiers or nitrifiers. But the opposite was observed for the anammox bacteria present in the soils. The anammox bacteria were more sensitive to heavy metal(loid) stress but more tolerated high salinity encountered in the investigated soils compared to the denitrifiers or nitrifiers. It appears that anammox reactions mediated by anammox bacteria played a key role in affecting the spatial variation in N₂O fluxes from the mangrove soils in the study area. And an increased level of ammonium in soils tended to promote the activity of anammox bacteria and consequently enhanced N₂O emission from the mangrove soils.

Different responses to joint exposure to cadmium and zinc depends on the sex in Populus cathayana

The alarming increase in soil contamination by heavy metals, such as cadmium and zinc demands immediate attention. The dioecious tree Populus cathayana, a phytoremediation plant, plays an important role in rehabilitating heavy metal contaminated areas. In this study, male and female P. cathayana plants were treated with Cd (20 mg kg^-1) and different levels of Zn (25, 50, or 100 mg kg^-1) to study their physiological responses. The results showed that Cd exposure alone caused stress by inhibiting the growth of both male and female plants. In both males and females, photosynthesis and antioxidant enzymes activities decreased substantially under Cd stress alone. Cd was largely located in the roots, but Zn was present in the shoots of both sexes. Zn supplementation considerably increased the photosynthetic rate from 14.62 % to 60.45 % and also enhanced the antioxidant enzymes activities from 24.11 % to 86.21 %. Zn treatment decreased the translocation ability of Cd compared to the Cd-only treatment, alleviating Cd toxicity. In addition, when sufficient Zn was made available, males showed a high degree of Cd accumulation, low root-to-shoot translocation, elevated antioxidant defense abilities, and an increased photosynthetic rate, while females were less responsive to Cd stress than males. Thus, combined exposure to Cd and Zn caused differential responses in plant growth and physiological processes between males and females P. cathayana. Male plants exhibit better Cd tolerance and accumulation capacity under optimum Zn supplementation. This study increases the fundamental knowledge regarding P. cathayana plants, which can be applied to enhance their remediation capacity in Cd-contaminated soils.

Thermophilic-mesophilic biodegradation: An optimized dual-stage biodegradation technique for expeditious stabilization of sewage sludge

The present study investigated the stabilization of fresh sewage sludge through a dual-stage biodegradation process; rotary drum composting in series with vermicomposting. After thermophilic exposure in a rotary drum composter, the partially degraded feedstock was separated into S1 without vermiculture, S2 and S3 with Eudrilus eugeniae and Eisenia fetida vermi-monocultures, respectively. The S3-derived vermicompost exhibited an 80% and 88% reduction in CO₂ and ammonium-nitrogen evolution rates, respectively, demonstrating the expedient stabilization of sludge. The robust, more than 85% seed germination index supported S2 and S3 derived vermicompost viability. A significant decrease in heavy metals was evinced with S2 and S3-derived vermicompost; the S1-derived end product exhibited higher Zn, Cr, and Pb levels in the absence of vermicomposting. Furthermore, soil amended with 20% vermicompost from S3 displayed 50% more plant growth than S1. Thus, the optimized thermophilic-mesophilic dual-biodegradation technique stabilizes sewage sludge quickly, has a lot of potential in sludge management facilities around the world, and produces a marketable end product.

Short-term responses of the anammox process to Ni(II): nitrogen removal, mechanisms and inhibition recovery

Anaerobic ammonia oxidizing (anammox) has already been recognized as an innovative and economical nitrogen removal technology. However, the effect of heavy metals on anammox bacteria in aquatic ecosystem remains largely unknown. Ni(II) is a common kind of heavy metals detected in industrial wastewater and municipal sewage treatment plants. Hence, the responses of the anammox process to Ni(II) were studied here. The results showed that anammox was the dominant reaction with Ni(II) concentrations no more than 25 mg/L. 1 mg/L of Ni(II) addition promoted nitrogen removal by anammox. The higher the Ni(II) concentrations and longer exposure time, the more inhibition for anammox bacteria was gotten. The IC₅₀ of Ni(II) to anammox was determined as 83.86 mg/L by an exponential regression equation. The inhibition of Ni(II) on anammox activity was mainly attributed to intracellular accumulation Ni(II) inhibition to HDH activity. Two times increase of IC₅₀ after 4 times circles of domestication suggests multiple intermittent domestication can increase the tolerance of anammox bacteria to Ni(II). EDTA washing can eliminate the inhibition of anammox activity by Ni(II) with Ni(II) addition no more than 25 mg/L.

Recovery Strategies for Heavy Metal-Inhibited Biological Nitrogen Removal from Wastewater Treatment Plants: A Review

Biological nutrient removal is an integral part of a wastewater treatment plant. However, the microorganism responsible for nutrient removal is susceptible to inhibition by external toxicants such as heavy metals which have the potential to completely inhibit biological nutrient removal. The inhibition is a result of the interaction between heavy metals with the cell membrane and the deoxyribonucleic acid (DNA) of the cell. Several attempts, such as the addition of pretreatment steps, have been made to prevent heavy metals from entering the biological wastewater systems. However, the unexpected introduction of heavy metals into wastewater treatment plants result in the inhibition of the biological wastewater treatment systems. This necessitates the recovery of the biological process. The biological processes may be recovered naturally. However, the natural recovery takes time; additionally, the biological process may not be fully recovered under natural conditions. Several methods have been explored to catalyze the recovery process of the biological wastewater treatment process. Four methods have been discussed in this paper. These include the application of physical methods, chelating agents, external field energy, and biological accelerants. These methods are compared for their ability to catalase the process, as well as their environmental friendliness. The application of bio-accelerant was shown to be superior to other recovery strategies that were also reviewed in this paper. Furthermore, the application of external field energy has also been shown to accelerate the recovery process. Although EDTA has been gaining popularity as an alternative recovery strategy, chelating agents have been shown to harm the metal acquisition of bacteria, thereby affecting other metabolic processes that require heavy metals in small amounts. It was then concluded that understanding the mechanism of inhibition by specific heavy metals, and understanding the key microorganism in the inhibited process, is key to developing an effective recovery strategy.

Oxidative stress and antioxidant mechanisms of obligate anaerobes involved in biological waste treatment processes: A review

In-depth understanding of the molecular mechanisms and physiological consequences of oxidative stress is still limited for anaerobes. Anaerobic biotechnology has become widely accepted by the wastewater/sludge industry as a better alternative to more conventional but costly aerobic processes. However, the functional anaerobic microorganisms used in anaerobic biotechnology are frequently hampered by reactive oxygen/nitrogen species (ROS/RNS)-mediated oxidative stress caused by exposure to stressful factors (e.g., oxygen and heavy metals), which negatively impact treatment performance. Thus, identifying stressful factors and understanding antioxidative defense mechanisms of functional obligate anaerobes are crucial for the optimization of anaerobic bioprocesses. Herein, we present a comprehensive overview of oxidative stress and antioxidant mechanisms of obligate anaerobes involved in anaerobic bioprocesses; as examples, we focus on anaerobic ammonium oxidation bacteria and methanogenic archaea. We summarize the primary stress factors in anaerobic bioprocesses and the cellular antioxidant defense systems of functional anaerobes, a consortia of enzymatic and nonenzymatic mechanisms. The dual role of ROS/RNS in cellular processes is elaborated; at low concentrations, they have vital cell signaling functions, but at high concentrations, they cause oxidative damage. Finally, we highlight gaps in knowledge and future work to uncover antioxidant and damage repair mechanisms in obligate anaerobes. This review provides in-depth insights and guidance for future research on oxidative stress of obligate anaerobes to boost the accurate regulation of anaerobic bioprocesses in challenging and changing operating conditions.