Piezo-promoted persulfate activation by SrBi2B2O7 for efficient sulfadiazine degradation from water

Application of catalytic technology based on the piezoelectric effect in wastewater purification

The demands of human life and industrial activities result in a significant influx of toxic contaminants into aquatic ecosystems. In particular, organic pollutants such as antibiotics and dye molecules, bacteria, and heavy metal ions are represented, posing a severe risk to the health and continued existence of living organisms. The method of removing pollutants from water bodies by utilizing the principle of the piezoelectric effect in combination with chemical catalytic processes is superior to other wastewater purification technologies because it can collect water energy, mechanical energy, etc. to achieve cleanliness and high removal efficiency. Herein, we briefly introduced the piezoelectric mechanisms and then reviewed the latest advances in the design and synthesis of piezoelectric materials, followed by a summary of applications based on the principle of piezoelectric effect to degrade pollutants in water for wastewater purification. Moreover, water purification technologies incorporating the piezoelectric effect, including piezoelectric effect-assisted membrane filtration, activation of persulfate, and battery electrocatalysis are elaborated. Finally, future challenges and research directions for the piezoelectric effect are proposed.

Peroxymonosulfate activation by cobalt-doped ferromanganese magnetic oxides through singlet oxygen and radical pathways for efficient sulfadiazine degradation

In this paper, cobalt-doped MnFe2O4 (CMFO-0.4) with oxygen vacancies was successfully synthesised by the sol-gel method and applied as a high-performance catalyst for the activation of peroxomonosulfate (PMS). The catalyst showed an excellent catalytic effect for the degradation of sulfadiazine (SDZ) by activated PMS, and the degradation rate can reach 100% in 10 minutes. The effects of different conditions on the degradation of SDZ were investigated, and it was determined that the optimal concentrations of catalyst and PMS were 0.2 g L-1 and 1 mM, respectively, and had good degradation effects in the pH 5-11 range. Free radical quenching experiments, XPS, and electron paramagnetic resonance (EPR) analyses revealed the presence of hydroxyl radicals (˙OH), sulphate radicals (SO4˙-), singlet oxygen (1O2), and superoxide radicals (˙O2 -) in the CMFO-0.4/PMS system, with 1O2 being the main reactive oxygen species (ROS). In addition, CMFO-0.4 has good reusability and adaptability to the presence of other substances.

Mechanistic insight into the degradation of sulfadiazine by electro-Fenton system: Role of different reactive species

Sulfadiazine (SDZ), a widely used effective antibiotic, is resistant to conventional biological treatment, which is concerning since untreated SDZ discharge can pose a significant environmental risk. Electro-Fenton (EF) technology is a promising advanced oxidation technology for efficiently removing SDZ. However, due to the limitations of traditional experimental methods, there is a lack of in-depth study on the mechanism of ·OH-dominated SDZ degradation in EF process. In this study, an EF system was established for SDZ degradation and the transformation products (TPs) were detected by mass spectrometry. Dynamic thermodynamic, kinetic and wave function analysis of reactants, transition states and intermediates were proposed by density functional theory calculations, which was applied to elucidate the underlying mechanism of SDZ degradation. Experimental results showed that amino, benzene, and pyrimidine sites in SDZ were oxidized by ·OH, producing TPs through hydrogen abstraction and addition reactions. ·OH was kinetically more likely to attack SDZ- than SDZ. Fe(IV) dominated the single-electron transfer oxidation reaction of SDZ, and the formed organic radicals can spontaneously generate the de-SO2 product via Smiles rearrangement. Toxicity experiments showed the toxicity of SDZ and TPs can be greatly reduced. The results of this study promote the understanding of SDZ degradation mechanism in-depth. ENVIRONMENTAL IMPLICATION: Sulfadiazine (SDZ) is one of the antibiotics widely used around the world. However, it has posed a significant environmental risk due to its overuse and cannot be efficiently removed by traditional treatment methods. The lack of in-depth study on SDZ degradation mechanism under reactive species limits the improvement of SDZ degradation efficiency. Therefore, this work focused on SDZ degradation mechanism in-depth under electro-Fenton system through reactive species investigation, mass spectrometry analysis, and theoretical calculation. The results in this study can provide a theoretical basis for improving the SDZ degradation efficiency which will contribute to solving SDZ pollution problems.

Piezoelectricity activates persulfate for water treatment: A perspective

Advanced oxidation processes (AOPs) utilizing persulfate (PS) offer great potential for wastewater treatment. Yet, the dependency on energy and chemical-intensive activation techniques, such as ultraviolet radiation and transition metal ions, constrains their widespread adoption. Recognizing this limitation, researchers are turning towards the piezoelectric effect-a novel, energy-efficient method for PS activation that capitalizes on the innate piezoelectric characteristics of materials. Intriguingly, this method taps into weak renewable mechanical forces omnipresent in nature, ranging from wind, tides, water flow, sound, and atmospheric forces. In this perspective, we delve into the burgeoning realm of piezoelectric/PS-AOPs, elucidating its fundamental principles, the refinement of piezoelectric materials, potential mechanical force sources, and pertinent application contexts. This emerging technology harbors significant potential as a pivotal element in wastewater pretreatment and may spearhead innovations in future water pollution control engineering.

Solvent-free synthesis of foam board-like CoSe2 alloy to selectively generate singlet oxygen via peroxymonosulfate activation for sulfadiazine degradation

Singlet oxygen (1O2) is a highly effective reactive species in selectively oxidizing organic pollutants. However, it is still challenging to rationally design robust catalysts for the selective generation of 1O2. Herein, the coordination and engineering architecture of the foam board-like CoSe2 alloy were facilely constructed through a green solvent-free method and displayed almost 100% 1O2 production selectivity. The CoSe2 alloy showed excellent catalytic ability for the efficient and fast removal of organic pollutants via peroxymonosulfate (PMS) activation compared with previously reported cobalt-based catalysts. The CoSe2/PMS system exhibited strong resistance for a broad pH range (3.0-11.0) and various coexisting inorganic ions owing to the advantage of the strong bonding of Co-Se in CoSe2 alloy. Mechanism studies revealed that 1O2 was the only reactive oxygen species in the CoSe2/PMS system. Theoretical calculations demonstrated that Co was the dominant adsorption site for PMS in CoSe2, and the production pathway of 1O2 was PMS* → *OH → *O → 1O2. In addition, it was proved that *OH and *O served as the rate-determining steps for the formation of 1O2 by PMS activation on CoSe2 alloy. These findings provide a rational strategy for preparing a series of low-cost transition metal-based alloy catalysts for PMS activation to achieve high-efficiency 1O2 production in the elimination of organic pollutants.

Efficient piezo-photocatalysis of 0D/2D α-Fe2O3/Bi2WO6: Synergy of weak force-driven piezoelectric polarization and Z-scheme junction

Photocatalysis shows huge potential in environmental purification, but suffers from fast photocharge recombination and finite photoabsorption. Piezoelectric polarization is perceived as a promising approach to drive charge separation, but it always relies on the energy-guzzling ultrasonic vibration. Herein, a piezo-photocatalytic system integrating dual electric fields constructed by weak force-driven piezoelectric polarization and Z-scheme junction is developed in 0D/2D α-Fe2O3/Bi2WO6. The introduction of low-frequency water flow-induced piezoelectric polarization field accelerates the migration of bulk photoexcited carriers of polar Bi2WO6, and forming Z-scheme junction with intimate interface guarantees the spatial separation of interfacial charges and strong visible light response. Benefiting from these merits, water flow-triggered α-Fe2O3/Bi2WO6 delivers a superb tetracycline hydrochloride photodegradation efficiency of 82% within 20 min, which outperforms related piezo-photocatalysts in previous reports, even those driven by high-frequency ultrasound. KPFM and DFT calculations provide forceful evidence for the Z-scheme transfer pathway between α-Fe2O3 and Bi2WO6. Additionally, the synergetic effect of constructing the Z-scheme junction and introducing piezoelectric polarization is well confirmed by PFM, COMSOL simulation, ESR and photoelectrochemical characterization. This work offers a novel strategy to design the piezo-photocatalytic system and maybe realize the in-situ treatment of sewage taking full advantage of hydrodynamic characteristics.

Piezoelectric materials and techniques for environmental pollution remediation

With the rapid development of industrialization and agriculture, a series of critical imminent environmental problems and water pollution have caught wide attention from the public and society. Piezoelectric catalysis technology with piezoelectric materials is a green and environmental method that can efficiently improve the separation of electron-hole pairs, then generating the active substances such as OH, H₂O₂ and O₂^-, which can degrade water pollutants. Therefore, we firstly surveyed the piezoelectric catalysis in piezoelectric materials and systematically concluded and emphasized the relationship between piezoelectric materials and the piezoelectric catalytic mechanism, the goal to elucidate the effect of polarization on piezoelectric catalytic performance and enhance piezoelectric catalytic performance. Subsequently, the applications of piezoelectric materials in water treatment and environmental pollutant remediation were discussed including degradation of organic pollutants, removal of heavy mental ions, radionuclides, bacteria disinfection and water splitting for H₂ generation. Finally, the development prospects and future outlooks of piezoelectric catalysis were presented in detail.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

Enhanced Piezocatalytic Reactive Oxygen Species Production Activity and Recyclability of the Dual Piezoelectric Cu3B2O6/PVDF Composite Membrane

Piezocatalysts have attracted considerable attention due to their ability to convert natural mechanical energy into chemical energy. However, the inefficient chemical reactions of the free charges and the poor mechanical endurance of the powder piezoelectric materials have largely restricted their wide application. Here, by combining piezocatalyst Cu₃B₂O₆ (CBO) and polyvinylidene fluoride (PVDF), a composite membrane CBO/PVDF with superior stability and excellent piezo-performance is prepared for the first time. This composite membrane shows a high efficiency for the degradation of antibiotics and organic dyes under ultrasonication; particularly, the removal efficiency is 33.9 times higher than that of a pure PVDF membrane for amoxicillin degradation, and it maintains a high efficiency after 16 cycling tests. The polarization electric field in the dual piezoelectric composite membrane significantly enhances the redox reaction of the intrinsic free carrier with dissolved oxygen and water molecules to generate reactive oxygen species. The results provide a strategy for combining the borate with the polymer membrane to lead piezocatalysis to real future applications.