Lanthanum tin oxide-modified sensor electrode for the rapid detection of environmentally hazardous insecticide carbaryl in soil, water, and vegetable samples

Electrochemical sensor for selective diquat detection based on samarium-stannate-nanoparticle-anchored titanium aluminum carbide MXene nanocomposites

The persistent presence of diquat (DQ) residue poses a significant threat to human health, underscoring the need to monitor DQ levels in agricultural samples. This is crucial for both precision and post-harvest agriculture, which require non-destructive, rapid, and cost-effective analytical methods using electrochemical detection. We developed a novel nanocomposite, composed of samarium stannate (Sm2Sn2O7) nanoparticles anchored on an MXene (Ti3Al(1-x)C2-OH(x); TAC-1), for the electrochemical quantification of DQ. A three-dimensional titanium aluminum carbide MXene surface was hydroxylated and functionalized with Sm2Sn2O7 nanoparticles using a combustion method. The resulting heterogeneous TAC-1-Sm2Sn2O7 composite contained active sites that enabled selective and sensitive DQ detection owing to the synergistic effects of the enhanced electrocatalytic sites and rapid charge transfer. Under real-world conditions, a TAC-1-Sm2Sn2O7-modified screen-printed carbon electrode sensor exhibited outstanding electrochemical activity toward DQ, with good recovery (98 %) from prepared samples. Hence, the designed sensor electrode is well suited for DQ monitoring.

Controllable construction of γ-Fe2O3 nanocubes anchored on carbon nanotube nanoribbons; boosting electrocatalytic activity for organic pollutant detection in vegetables

Developing a highly efficient electrocatalyst for detecting hazardous bisphenol S (BPS) is essential to minimize health risks. Herein, we fabricate γ-Fe2O3 nanocubes (IONCs) anchored on carbon nanotube nanoribbons (CNRs) (denoted as IONCs-CNRs) for the electrochemical detection of BPS in vegetables. Importantly, the IONCs can be selectively formed only on CNRs via amperometric deposition, while γ-Fe2O3 cubic clusters (IOCCs) form in the absence of CNRs. This results in a remarkable 300 % increase in electrocatalytic activity compared to that exhibited by IOCCs. As a result, the IONCs-CNRs sensor exhibits high sensitivity (S = 14.7548 μAμM-1 cm-2), a low detection limit of 1.9 nM, and good selectivity for BPS detection. Moreover, the sensor shows a good recovery rate of 96.23 to 99.95 % in detecting BPS in vegetable samples. The controlled IONCs-CNRs, with enhanced catalytic activity, represent a promising electrocatalyst for the on-site detection of trace amounts of BPS in food safety applications.

Apple polysaccharide stabilized palladium nanoparticles for sensitive detection of organophosphorus pesticide

The widespread application of organophosphorus pesticides (OPs) has inflicted significant damage on human well-being and food security. Hence, it is imperative to develop a friendly and accessible biosensor for the detection of OPs. Herein, apple polysaccharide (AP) stabilized palladium nanoparticles (AP-PdnNPs) with a particle size of 2.75-5.95 nm were prepared using AP as a stabilizer and reducing agent. AP-Pd30NPs exhibited good peroxidase-like activity and effectively decomposed H2O2 to ·OH, which catalyzed the 3,3',5,5'-tetramethylbenzidine system to become blue. The catalytic kinetics of AP-Pd30NPs conformed to the typical Michelis-Menten equation. Furthermore, OPs directly inhibited the peroxidase-like activity of AP-Pd30NPs. Thus, a highly effective colorimetric biosensor was developed for the detection of OPs. The detection range of the biosensor was 0.050 μg/L - 200 mg/L, and the limit of detection was extremely low to 0.010 μg/L. Compared with other nanomaterials, the detection platform based on AP-Pd30NPs can effectively detect organophosphorus pesticides without coupling natural enzymes；this method is more economical and practical. Therefore, this established method explores good perspective for the detection of OPs.

A Portable Electrochemical Dopamine Detector Using a Fish Scale-Derived Graphitized Carbon-Modified Screen-Printed Carbon Electrode

In this paper, a highly conductive alkali-activated graphitized carbon (a-GC) was prepared using tilapia fish scales as precursors through enzymolysis, activation and pyrolytic carbonization methods. The prepared a-GC was modified on the surface of a screen-printed carbon electrode to construct a flexible portable electrochemical sensing platform, which was applied to the differential pulse voltametric detection of dopamine (DA) using a U-disk electrochemical workstation combined with a smart phone and Bluetooth. The prepared a-GC possesses good electrical conductivity, a large specific surface area and abundant active sites, which are beneficial for the electrooxidation of DA molecules and result in excellent sensitivity and high selectivity for DA analysis. Under the optimal conditions, the oxidation peak current of DA increased gradually, with its concentrations in the range from 1.0 μmol/L to 1000.0 μmol/L, with the detection limit as low as 0.25 μmol/L (3S/N). The proposed sensor was further applied to the determination of DA in human sweat samples, with satisfactory results, which provided an opportunity for developing noninvasive early diagnosis and nursing equipment.

Platinum nanoflowers stabilized with aloe polysaccharides for detection of organophosphorus pesticides in food

Organophosphorus pesticides can inhibit the activity of acetylcholinesterase and cause neurological diseases. Therefore, it is crucial to establish an efficient and sensitive platform for organophosphorus pesticide detection. In this work, we extracted aloe polysaccharide (AP) from aloe vera with the number average molecular weight of 27760 Da and investigated its reducing property. We prepared aloe polysaccharide stabilized platinum nanoflowers (AP-Ptn NFs), their particle size ranges were 29.4-67.3 nm. Furthermore, AP-Ptn NFs exhibited excellent oxidase-like activity and the catalytic kinetics followed the typical Michaelis-Menten equation. They showed strong affinity for 3,3',5,5'-tetramethylbenzidine substrates. More importantly, we developed a simple and effective strategy for the sensitive colorimetric detection of organophosphorus pesticides in food using biocompatible AP-Ptn NFs. The detection range was 0.5 μg/L - 140 mg/L, which was wider than many previously reported nanozyme detection systems. This colorimetric biosensor had good selectivity and good promise for bioassay analysis.

Engineered tenorite structure of barium-enriched copper oxide for on-site monitoring of cytotoxic methotrexate in environmental samples

Emerging pharmaceutical pollutants pose a threat to both human and environmental health. The removal and monitoring of such pollutants necessitate the use of practical on-site monitoring devices; however, the designs of such devices are underdeveloped. This study involves the fabrication of a low-cost sensor based on barium-incorporated copper oxide (Ba-CuO) for the on-site monitoring of the cytotoxic drug methotrexate (MTRX) in water and sediment samples. The tenorite structure of CuO was slightly enriched with Ba ions at the td sites, distorting the tetrahedron and enhancing its electrochemical properties. Ba-CuO was obtained from Cu(NO₃)₂ and Ba(OH)₂ by a ligand exchange protocol and was characterized using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray analysis. In addition, the Ba-CuO sensor was tested under various conditions, and it could detect MTRX at concentrations as low as 0.4 nM, with a high sensitivity of 1.3567 µA µM^-1 cm^-2. On-site monitoring yielded recoveries of greater than 93 % from spiked samples, thus exhibiting excellent reproducibility and stability. Therefore, the developed method is practical and has no matrix effect on the MTRX sensor.

Integration of Metallic Nanomaterials and Recognition Elements for the Specifically Monitoring of Pesticides in Electrochemical Sensing

Although all countries have been controlling the excessive use of pesticides, incidents of pesticide residues still existed. Electrochemical biosensors are extensively applied detection techniques to monitor pesticides with the help of different types of biorecognition components mainly including, antibodies, aptamers, enzymes (i.e., acetylcholinesterase, organophosphorus hydrolase, etc.), and synthetic molecularly imprinted polymers. Besides, the electrode materials mainly affected the sensitivity of electrochemical biosensors. Metallic nanomaterials with various structures and excellent electrical conductivity were desirable choice to construct electrochemical platforms to achieve the detection with high sensitivity and good specificity toward the target. This work reviewed the developed metallic materials including monometallic nanoparticles, bimetallic nanomaterials, metal atoms, metal oxides, metal molybdates, metal-organic frameworks, MXene, etc. Integration of recognition elements endowed the electrode materials with higher specificity toward the target pesticide. Besides, future challenges of metallic nanomaterials-based electrochemical biosensors for the detection of pesticides are also discussed and described.

Strategy of In Situ Electrochemical Regulation for Highly Enhanced Nonenzymatic Sensing of Carbaryl

Specific and sensitive sensing of most pesticide residues relies on enzymes such as acetylcholinesterase and advanced materials, which need to be loaded on the surface of working electrodes, leading to instability, uneven surface, tedious process, and high cost. Meanwhile, employing certain potential or current in electrolyte solution could also modify the surface in situ and overcome these drawbacks. However, this method is only regarded as electrochemical activation widely applied in the pretreatment of electrodes. In this paper, by means of regulating the electrochemical technique and its parameters, we prepared a proper sensing interface and derivatized the carbaryl (a carbamate pesticide) hydrolyzed form (1-naphthol) to enhance sensing by 100 times within several minutes. After regulation I by chronopotentiometry with 0.2 mA for 20 s or chronoamperometry with 2 V for 10 s, abundant oxygen-containing groups form and the ordered carbon structure is destroyed. Sweeping from -0.5 to 0.9 V through cyclic voltammetry for only one segment, following regulation II, the composition of oxygen-containing groups changes and the disordered structure is alleviated. Finally, on the constructed sensing interface, test by regulation III through differential pulse voltammetry from 0.8 to -0.4 V, resulting in derivatization of 1-naphthol during 0.8-0 V, followed by electroreduction of the derivative at around -0.17 V. Compared with the electro-oxidation peak at 0.5 V in previous reports, it is essential to improve specificity, even toward several other carbamate pesticides with similar structures. Hence, the in situ electrochemical regulation strategy has demonstrated great potential for effective sensing of electroactive molecules.

Ultrasensitive detection of ineradicable and harmful antibiotic chloramphenicol residue in soil, water, and food samples

Chloramphenicol (CAP) is a harmful antibiotic that inevitably enters our food chain through natural or manmade means. Its ineradicable residue pollutes soils and water, accumulates in plants and animal products, and eventually affects human health. An ultrasensitive method for detecting and monitoring CAP is therefore urgently required. Herein, we report an ultrafast extraction and amperometry detection method based on a graphite-sulfate-modified electrode for detecting CAP in soil, water, and food samples. The graphite sulfate is prepared by the oxidation method and its structural properties are comprehensively investigated. The developed sensor electrode showed a wider linear range of 0.3-32.0 μg kg^-1 and an ultralow detection limit of 0.1 μg kg^-1, both of which meet the European Commission Reg 1871/2019 reference points for action. The method works well with both meat and plant samples, achieving CAP recoveries ranging from 90.8 to 99.1% even at low concentrations. Moreover, the sensor electrode shows more than 95% selectivity toward CAP detection in the soil, water, and food matrices. The developed method exhibits good repeatability and reproducibility in the analysis of real samples.