Low quantity of Pt loaded onto CeCoOx nanoboxes: Surface-rich reactive oxygen species for catalytic oxidation of toluene

MOF-engineered Cu2O nanozymes with boosted peroxidase-like activity for colorimetric-fluorescent dual-mode detection of deoxynivalenol

The development of a high sensitivity biosensor for the detection of highly toxic deoxynivalenol (DON) is vital for human health and food security. In this work, by integrating metal-organic frameworks (MOF) with cubic Cu2O nanoparticles (Cu2O@MOF), the nanocomposite achieved a 4.8-fold increase in specific surface area compared to pristine Cu2O, which synergistically enhanced its peroxidase-like (POD) activity through optimized substrate affinity and accelerated charge transfer. Consequently, based on the marriage properties of POD activity and fluorescence signal from Cu2O@MOF nanoparticles and carbon dots (CDs), a colorimentric-fluorescent dual-mode biosensor was constructed for DON detection. Concurrently, the competitive binding of DON with immobilized antigens on Cu2O@MOF-CDs results in antibody displacement, leading to progressive reduction of captured probes with increasing DON concentrations, thereby inducing proportional attenuation in both colorimetric and fluorescence signal intensities. Under the optimum conditions, the established biosensor achieved a detection limit of 0.0018 ng/mL for DON. Furthermore, the prepared dual-mode biosensor was successfully applied to detect DON in tap water, wheat and corn, demonstrating its practical utility for real-world applications. Overall, this work not only advances nanozyme design through MOF-mediated interface engineering but also provides a rapid, accurate, and field-deployable strategy for monitoring mycotoxins in complex matrices.

Influence of atomic coordination on the activity of lattice oxygen and catalytic oxidation of toluene over regular Cu2O crystalline

VOCs oxidation over transition metal catalyst is commonly understood via the Mars-van Krevelen mechanism involving the crucial role of lattice oxygen (OL) activity, however, how it is influenced by atomic coordination is still unclear. Herein, we use model catalysts of Cu2O-cub, Cu2O-oct and Cu2O-dod with crystal planes of (100), (111) and (110), respectively, to investigate the OL activity and catalytic oxidation of toluene. The activity of Cu2O-oct is found to be the highest, followed by Cu2O-cub and Cu2O-dod. Experiments results combined with density functional theory show that, although low di-coordinated O atoms leads to the lowest surface oxygen vacancy formation energy (2.47 eV) and the highest surface OL activity of Cu2O-cub, it cannot determine the activity. The lowest bulk oxygen vacancy formation energy (3.16 eV) in Cu2O-oct terminated with tri-coordinated O atoms and open surface can accelerate the migration and replenishment of OL, thereby promoting the catalytic activity.

Recent Advances of the Effect of H2O on VOC Oxidation over Catalysts: Influencing Factors, Inhibition/Promotion Mechanisms, and Water Resistance Strategies

Water vapor is a significant component in real volatile organic compounds (VOCs) exhaust gas and has a considerable impact on the catalytic performance of catalysts for VOC oxidation. Important progress has been made in the reaction mechanisms of H2O and water resistance strategies for VOC oxidation in recent years. Despite advancements in catalytic technology, most catalysts still exhibit low activity under humid conditions, presenting a challenge in reducing the adverse effects of H2O on VOC oxidation. To develop water-resistant catalysts, understanding the mechanistic role of H2O and implementing effective water-resistance strategies with influencing factors are imperative. This Perspective systematically summarizes related research on the impact of H2O on VOC oxidation, drawing from over 390 papers published between 2013 and 2024. Five main influencing factors are proposed to clarify their effects on the role of H2O. Five inhibition/promotion mechanisms of H2O are introduced, elucidating their role in the catalytic oxidation of various VOCs. Additionally, different kinds of water resistance strategies are discussed, including the fabrication of hydrophobic materials, the design of specific structures and morphologies, and the introduction of additional elements for catalyst modification. Finally, scientific challenges and opportunities for enhancing the design of efficient and water-resistant catalysts for practical applications in VOC purification are highlighted.

Supported nano-sized precious metal catalysts for oxidation of catalytic volatile organic compounds

Volatile organic compounds (VOCs) are common contaminants found as indoor as well as outdoor pollutants, which can induce acute or chronic health hazards to the human physiological system. The catalytic oxidation method is widely considered as one of the effective methods for removing VOCs, and the development of highly effective catalysts is highly urgent for booming this interesting field. This review focuses on the recent progress of VOC oxidation catalyzed by supported nano-sized precious metal catalysts, and discusses the effects of metal composition, supports, size, and morphology on the catalytic activity. In addition, the roles played by both nano-sized precious metals and supports in enhancing the performance of catalytic VOCs are also systematically discussed, which will guide the further development of more advanced VOC catalysts.

Constructing surface oxygen defects at CuO-Co3O4 interface to boost toluene oxidation over CuO/Co3O4 catalysts

As a typical heterogeneous catalytic process, the catalytic combustion of toluene over Co3O4-based catalysts is strongly depends on the surface properties of catalysts, especially the concentration of surface oxygen defects. Here, a novel way was proposed to construct chemically bonded CuO-Co3O4 interface by chemical deposition of CuO onto Co3O4 nanoflowers. The interfacial refinement effect between CuO and Co3O4 support disrupted the ordered atomic arrangement and created countless unsaturated coordination sites at CuO-Co3O4 interface, inducing a significant generation of surface oxygen defects. Surface-rich oxygen vacancies enhanced the capacity of 20%CuO/Co3O4-R to adsorb and activate oxygen species. Benefiting from this, 90 % toluene conversion was reached at 228 °C over 20%CuO/Co3O4-R, which was much lower than that over 20%CuO/Co3O4-S prepared by impregnation method and CuO/Co3O4-mix obtained by mechanically mixing way. In-situ DRIFTS analysis revealed that toluene could be directly decomposed into benzaldehyde at the highly defective CuO-Co3O4 interface, leading to toluene oxidation following the path of toluene → benzaldehyde → benzoate → maleic anhydride → water and carbon dioxide over 20%CuO/Co3O4-R, which was significantly different from decomposition mechanism over 20%CuO/Co3O4-S. Additionally, 20%CuO/Co3O4-R displayed terrific recyclability and outstanding stability, showing good application potential.

Ultrathin LayCoOx Nanosheets with High Porosity Featuring Boosted Catalytic Oxidation of Benzene: Mechanism Elucidation via an Experiment-Theory Combined Paradigm

Designing transition-metal oxides for catalytically removing the highly toxic benzene holds significance in addressing indoor/outdoor environmental pollution issues. Herein, we successfully synthesized ultrathin LayCoOx nanosheets (thickness of ∼1.8 nm) with high porosity, using a straightforward coprecipitation method. Comprehensive characterization techniques were employed to analyze the synthesized LayCoOx catalysts, revealing their low crystallinity, high surface area, and abundant porosity. Catalytic benzene oxidation tests demonstrated that the La0.029CoOx-300 nanosheet exhibited the most optimal performance. This catalyst enabled complete benzene degradation at a relatively low temperature of 220 °C, even under a high space velocity (SV) of 20,000 h-1, and displayed remarkable durability throughout various catalytic assessments, including SV variations, exposure to water vapor, recycling, and long time-on-stream tests. Characterization analyses confirmed the enhanced interactions between Co and doped La, the presence of abundant adsorbed oxygen, and the extensive exposure of Co3+ species in La0.029CoOx-300 nanosheets. Theoretical calculations further revealed that La doping was beneficial for the formation of oxygen vacancies and the adsorption of more hydroxyl groups. These features strongly promoted the adsorption and activation of oxygen, thereby accelerating the benzene oxidation processes. This work underscores the advantages of doping rare-earth elements into transition-metal oxides as a cost-effective yet efficient strategy for purifying industrial exhausts.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Insights into non-crystalline structure of solid solution Ce-Mn co-oxide nanofibers for efficient low-temperature toluene oxidation

The controllable preparation of efficient non-crystalline solid solution catalysts is a great challenge in the catalytic oxidation of volatile organic compounds. In this work, series non-crystalline solid solution structured Ce-Mn co-oxide nanofibers were creatively prepared by adjusting Ce/Mn molar ratios using electrospinning. 0.20CeMnOx (the ratio of Ce to Mn was 0.2) displayed an outstanding low-temperature toluene oxidation activity (T90 = 233 °C). The formation of the amorphous solid solution and the unique nanofiber structure both contributed to a large specific surface area (S = 173 m2 g-1) and high adsorbed oxygen content (Oads/O = 41.3%), which enhanced the number of active oxygen vacancies. The synergies between non-crystalline structure and active oxygen species markedly improved oxygen migration rate as well as redox ability of the catalysts. Additionally, in situ diffuse reflectance infrared Fourier transform spectra showed that the absorbed toluene could be completely oxidized to CO2 and H2O with benzyl alcohol, benzaldehyde, benzoic acid, and maleic anhydride as intermediates. In summary, this study provided an alternative route for the synthesis of non-crystalline metal co-oxide nanofibers.