Effect of sorption properties on the content, ecotoxicity, and bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) in bottom sediments

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased. Thanks to its excellent characteristics (high stability, abundant benzene rings), Ni@C-acid was used as fiber coatings in headspace solid-phase microextraction (HS-SPME) technology for extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) prior to gas chromatography-flame ionization detector (GC-FID) analysis. The experimental parameters of extraction temperature, extraction time, agitation speed, desorption temperature, desorption time and sodium chloride (NaCl) concentration were studied. Under optimal experimental conditions, the wide linear range (0.01-30 ng mL-1), the good correlation coefficient (0.9916-0.9984), the low detection limit (0.003-0.011 ng mL-1), and the high enrichment factor (5273-13793) were obtained. The established method was successfully used for the detection of trace PAHs in actual tea infusions samples and satisfied recoveries ranging from 80.94-118.62 % were achieved. The present work provides a simple method for the preparation of highly stable and adsorbable porous carbon microsphere materials with potential applications in the extraction of environmental pollutants.

Distribution, levels, sources and risk assessment of polycyclic aromatic hydrocarbons in the bottom sediments of a Mediterranean river under multiple anthropopressures (Soummam River), Algeria

The Soummam River, a vital watercourse in Algeria is threatened by anthropogenic activities despite its protected wetland status. This study is the first to assess sediment pollution in the Soummam River, examining levels, compositions, sources of 16 PAHs and their effects on the environment and human health. Analysis employing Principal Component Analysis (PCA) and molecular diagnostic ratios pointed to petrogenic sources, likely stemming from petroleum leaks originating from aging pipeline and vehicles, as well as pyrogenic sources arising from vehicle exhaust and biomass combustion. Environmental and health risks were assessed through risk quotients (RQ), Sediments Quality Guidelines (SQG) and Total Lifetime Cancer Risk (TLCR). Ecological risk was found to range from moderate to high, with anticipated biological impacts, while cancer risk was deemed low. Toxicity assessment, measured by TEQ, revealed that the majority of monitoring stations exceeded safe levels. Consequently, urgent action by local authorities is warranted to implement ecosystem rehabilitation measures.

Polycyclic aromatic hydrocarbons and their halogenated derivatives in soil from Yellow River Delta: Distribution, source apportionment, and risk assessment

The distribution of polycyclic aromatic hydrocarbons (PAHs) and halogenated PAHs (HPAHs) in surface soils from the petroleum industrial area of the Yellow River Delta (YRD) in China were investigated. The total concentrations of 16 PAHs ranged from 19.6 to 1560 ng/g, while 22 HPAHs ranged from 2.44 to 14.9 ng/g. Moreover, a high degree of spatial distribution heterogeneity was observed for both PAHs and HPAHs, which is likely attributed to the distinct industrial activities in studied area. The combustion of biomass and petroleum were identified as primary sources of soil PAHs and HPAHs in the YRD. Furthermore, benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo[g,h,i]perylene exhibited high ecological risks (with risk quotients of 1.47, 1.44, and 1.02, respectively) in specific sites within the YRD. Considering the high toxicity of HPAHs and their potential joint environmental effects with PAHs, continuous attention should be directed towards the environmental risks associated with both PAHs and HPAHs.

Enhanced phenanthrene biodegradation in river sediments by harnessing calcium peroxide nanoparticles and minerals in Sphingomonas sp. DSM 7526 cultivation

Coupling chemical oxidation and biodegradation to remediate polycyclic aromatic hydrocarbon (PAH)-contaminated sediment has recently gained significant attention. In this study, calcium peroxide nanoparticles (nCaO2) were utilized as an innovative oxygen-releasing compound for in-situ chemical oxidation. The study investigates the bioremediation of phenanthrene (PHE)-contaminated sediment inoculated with Sphingomonas sp. DSM 7526 bacteria and treated with either aeration or nCaO2. Using three different culture media, the biodegradation efficiencies of PHE-contaminated anoxic sediment, aerobic sediment, and sediment treated with 0.2% w/w nCaO2 ranged from 57.45% to 63.52%, 69.87% to 71.00%, and 92.80% to 94.67%, respectively. These values were significantly higher compared to those observed in non-inoculated sediments. Additionally, the type of culture medium had a prominent effect on the amount of PHE removal. The presence of minerals in the culture medium increased the percentage of PHE removal compared to distilled water by about 2-10%. On the other hand, although the application of CaO2 nanoparticles negatively impacted the abundance of sediment bacteria, resulting in a 30-42% decrease in colony-forming units after 30 days of treatment, the highest PHE removal was obtained when coupling biodegradation and chemical oxidation. These findings demonstrate the successful application of bioaugmentation and chemical oxidation processes for treating PAH-contaminated sediment.

Variations in the concentration, inventory, source, and ecological risk of polycyclic aromatic hydrocarbons in sediments of the Lake Chaohu

In this study, the ecological risk assessment of PAHs pollution, the existing S-T model was improved and applied to this PAHs pollution assessment in surface sediment in Lake Chaohu. The potential sources and contributions of PAHs in the surface sediment were estimated by molecular diagnostic ratio (MDR) and positive matrix factorization (PMF). The results showed that the average concentration of 16 priority PAHs in the surface sediment was 718.16 ng/g in 2009 and 334.67 ng/g in 2020. In 2020, PAHs concentration has decreased compared to 2009 and the dominant composition has changed from high- to low-molecular-weight PAHs. The estimated PAHs mass inventory of the top 2 cm surface sediment was 2712 tons in 2009 and 1263 tons in 2020. Ecosystem risk assessment by improved S-T models suggested that the overall ecosystem risk of the studied regions was acceptable.

A machine learning and experimental-based model for prediction of soil sorption capacity toward phenanthrene

Sorption by soil is the fundamental basis for environment fate of hydrophobic organic contaminants (HOCs), which varies significantly depending on diverse properties of soils. Therefore, a generalized approach to predict HOC sorption by soils is required. In this study, 488 data points were extracted from references and adopted to develop models for estimating the sorption capacities of phenanthrene in soils using six different machine learning (ML) approaches. The extreme gradient boosting (XGBT) model demonstrated the most favorable performance, achieving a coefficient of determination of 0.91 and root-mean-square errors of 0.24 for the testing dataset. The XGBT model's performance was further demonstrated by comparing with experimental data from batch sorption tests conducted on 20 soil samples collected from 17 provinces of China. The differences between the predicted values and the experimental values were statistically equal to zero (p = 0.14). Leveraging the XBGT model together with soil properties from the Harmonized World Soil Database, the distribution of sorption capacities in Chinese soils was successfully depicted on a national scale. This research is expected to contribute to a deeper understanding of the migration of persistent organic pollutants in terrestrial system. Furthermore, the established model holds implications for more precise and scientific soil environmental management.

Metagenomics reveals mechanism of pyrene degradation by an enriched bacterial consortium from a coking site contaminated with PAHs

A bacterial consortium, termed WPB, was obtained from polycyclic aromatic hydrocarbons (PAHs) contaminated soil from a coking site. The consortium effectively degraded 100 mg L-1 pyrene by 94.8 % within 12 days. WPB was also able to degrade phenanthrene (98.3 %) and benzo[a]pyrene (24.6 %) in 12 days, while the individual isolates showed no PAHs degrading ability. Paracoccus sp. dominated the bacterial consortium (65.0-86.2 %) throughout the degradation process. Metagenomic sequencing reveals the proportion of sequences with xenobiotics biodegradation and metabolism increased throughout the degradation process indicating the great potential of WPB to degrade pollutants. The annotation of genes by metagenomic analysis help reconstruct the degradation pathways ("phthalate pathway" and "naphthalene degradation") and reveal how different bacteria contribute to the degradation process. Mycobacterium gilvum was found to carry nidAB genes that catalyze the first step of high-molecular-weight (HMW) PAHs in the degradation process despite Mycobacterium gilvum accounting for only 0.005-0.06 %. In addition, genomes of Paracoccus denitrificans and some other genera affiliated with Devosia, Pusillimonas caeni and Eoetvoesia caeni were successfully recovered and were found to carry genes responsible for the degradation of the intermediates of pyrene. These results enable further understanding of the metabolic patterns of pyrene-degrading consortia and provide direction for further cultivation and discovery of key players in complex microbial consortia.

Acid-base potentiometric titration using a stainless steel electrode without oxidative treatment

An AISI 304 stainless steel laminar electrode without oxidative treatment was investigated for the potentiometric titration of hydrochloric acid with sodium hydroxide. The proposed electrode was obtained from metalworking cuttings. Scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence spectroscopy and X-ray diffraction were used to study the surface morphology and chemical composition of the electrode. The electrode showed a sensitivity of 59.18 ± 0.37 mV/pH, which was reproducible under intermediate conditions. Potentiometric titration showed a curve with deviations from pH 9.5 with respect to the glass electrode. However, this did not affect the quantification as the jumps of the curves coincided. The endpoint was 9.25 mL for both electrodes and the hydrochloric acid concentration was 0.0845 mol/L, with a deviation of 0.0004 mol/L from the standard concentration of 0.0841 mol/L. The nonartificially oxidised electrode did not show any crystalline oxide phases, whereas after oxidation it showed semicrystalline phases of iron and chromium oxides and increased the crystallinity of the steel. Despite the low content of surface oxides, stainless steel electrodes can give a Nernstian response to pH, depending on the surface characteristics of the material. This leads to the need to calibrate any electrode prior to oxidative treatment to rule out a Nernstian response without surface modification.