Oxidative power loss control in ozonation: Nanobubble and ultrasonic cavitation

Ionic adsorption on bulk nanobubble interfaces and its uncertain role in diffusive stability

HYPOTHESIS

Bulk nanobubbles have been proposed to improve gas exchange in a variety of applications, such as in water treatment, theragnostics, and microfluidic surface cleaning. However, there is currently no consensus regarding the mechanism responsible for their reportedly long lifetimes, which contradicts classical understanding of diffusive bubble dynamics. Recently, there has been increasing support for an electrostatic stability mechanism, following from experiments that observe negatively charged zeta potentials around nanobubbles.

SIMULATIONS

We use high-fidelity Molecular Dynamics simulations to model bulk nanobubbles under mechanical equilibrium in a sodium iodide electrolyte solution, to investigate ionic adsorption on the liquid-gas interface, and resulting zeta potential. We critically examine the hypothesised electrostatic stress underpinning this previously suggested stability mechanism, which is theorised to stabilise the nanobubbles against dissolution by counteracting the otherwise dominant effects of surface tension, however, has been too difficult to directly measure in experiments.

FINDINGS

Ions adsorb onto the liquid-gas interface, confirming an Electric Double Layer (EDL) distribution around the nanobubble with an estimated zeta potential, in accordance with experiments. However, we find no significant electrostatic stress exerted on the nanobubble surface, as any ion charge density in the EDL is completely neutralised by the rearrangement of the water molecules. As a result, the internal gas pressure is still well predicted by the standard Laplace pressure equation (with a fitted Tolman length correction ), challenging an essential assumption underlying the previously proposed theories, and we instead speculate on alternative mechanisms for electrostatic-based stability.

Enhanced Hydrogen Production via Photothermal-Coupled Ultrasound Pyrolysis of Waste Bio-Oil

The creation of hydrogen using the lower-cost feedstock, waste organics (WOs), e. g. kitchen waste bio-oil, is a win-win solution, because it can both solve energy problems and reduce environmental pollution. Ultrasound has received considerable interest in organic decomposition; however, the application of ultrasound alone is not a good choice for the hydrogen production from WOs, because of the energy consumption and efficiency. To boost the hydrogen production based on ultrasonic cavitation cracking of bio-oil, photothermal materials are introduced into the hydrogen production system to form localized hot spots. Materials carbon black (CB), carbon nanotubes (CNT), and silicon dioxide (SiO2) all exhibit significant enhancing effects on the hydrogen production from bio-oil, and the CB exhibits the most significant strengthening effect among these materials. When the dosage of CB is 5 mg, hydrogen production rate is 180.1 μmol h-1, representing a notable 1.7-fold increase compared to the production rate without CB. In the presence of light and ultrasound, the hydrogen production rate can be increased by 66.7-fold compared to the situation where only light is present without ultrasound.

Advances in nanobubbles for cancer theranostics: Delivery, imaging and therapy

Maximizing treatment efficacy and forecasting patient prognosis in cancer necessitates the strategic use of targeted therapy, coupled with the prompt precise detection of malignant tumors. Theutilizationof gaseous systems as an adaptable platform for creating nanobubbles (NBs) has garnered significant attention as theranostics, which involve combining contrast chemicals typically used for imaging with pharmaceuticals to diagnose and treattumorssynergistically in apersonalizedmanner for each patient. This review specifically examines the utilization of oxygen NBsplatforms as a theranostic weapon in the field of oncology. We thoroughly examine the key factors that impact the effectiveness of NBs preparations and the consequences of these treatment methods. This review extensively examines recent advancements in composition schemes, advanced developments in pre-clinical phases, and other groundbreaking inventions in the area of NBs. Moreover, this review offers a thorough examination of the optimistic future possibilities, addressing prospective methods for improvement and incorporation into widely accepted therapeutic practices. As we explore the ever-changing field of cancer theranostics, the incorporation of oxygen NBs appears as a promising development, providing new opportunities for precision medicine and marking a revolutionary age in cancer research and therapy.

Study on the mechanism of ultrasonic cavitation effect on the surface properties enhancement of TC17 titanium alloy

In industrial production and scientific research, ultrasonic cavitation technology, with its outstanding physical and chemical processing capabilities, has been widely applied in fields such as material surface modification, chemical synthesis, and biotechnology, becoming a focal point of research and application. This article delves into the effects of different ultrasonic frequencies on cavitation outcomes through the combined use of numerical simulation, fluorescence analysis, and high-speed photography, specifically analyzing the quantitative improvement in the mechanical properties of TC17 titanium alloy under ultrasonic cavitation at frequencies of 20 kHz, 30 kHz, and 40 kHz. The study found that at an ultrasonic frequency of 20 kHz, the maximum expansion radius of cavitation bubbles can reach 51.4 μm, 8.6 times their initial radius. Correspondingly, fluorescence intensity and peak area also increased to 402.8 and 28104, significantly above the baseline level. Moreover, after modification by ultrasonic cavitation, the original machining marks on the surface of TC17 titanium alloy became fainter, with the emergence of new, uniformly distributed microfeatures. The microhardness of the material increased from 373.7 Hv to 383.84 Hv, 396.62 Hv, and 414.06 Hv, with a maximum improvement of 10.8 %. At the same time, surface height difference and roughness significantly decreased (to 3.168 μm and 0.61 μm respectively), with reductions reaching 45.1 % and 42.4 %, indicating a significant improvement in material surface quality. Notably, there is a negative correlation between the improvement of mechanical properties and ultrasonic frequency, suggesting that the improvement effects decrease as ultrasonic frequency increases. This research not only reveals the quantitative relationship between ultrasonic cavitation frequency and material surface modification effects but also provides a solid scientific basis and practical guidance for the application of ultrasonic cavitation technology in surface engineering, signifying the technology's potential for broad application in the future.

Dynamic Fluorescence Sensing of Bromide Ions by Photochromic Bi(III)-Coordination Polymers Based on a Ligand Integrated by Naphthalene Diimides and Pyridinium in Solution and Films

Bismuth(III)-based complexes have garnered increasing attention in fluorescence sensing due to their environmentally friendly and sustainable characteristics. A Bismuth(III) coordination polymer (CP),1-Cl based on a naphthalene diimides(NDI)-pyridinium is synthesized by an in situ reaction method. Notable for its sensitivity to visible light, 1-Cl shows excellent photochromic properties, and the integration of NDI and pyridinium in one ligand makes photogenerated radicals more stable. Structural analysis and theoretical calculations are employed to investigate the potential pathway of photoinduced electron transfer (ET) during the photochromic process. Notably, in aqueous solutions, 1-Cl displays an extraordinary fluorescence enhancement response to bromide ion (Br-), resulting in a distinct transition from yellow to orange in color. The potential mechanism of fluorescence sensing has been revealed through single-crystal X-ray diffraction analysis. This insight highlights a continuous substitution process where the Cl- ions are successively replaced by Br- ions. Consequently, a single-crystal-to-single-crystal transformation (SCSC) occurs, yielding the intermediate species, 1-Cl-Br, which ultimately transforms into the final product, 1-Br. Finally, the photochromic film is successfully prepared and applied to practical applications such as ink-free printing, information anti-counterfeiting, and the visual detection of Br- ions. This work combines photochromism with fluorescence sensing, broadening the research field and practical application of photochromic materials.

A clean and efficient route for extraction of vanadium from vanadium slag by electro-oxidation combined with ultrasound cavitation

Extracting vanadium (V) from vanadium slag (VS) by the traditional roasting-leaching process has disadvantages of high energy consumption and high poisonous gases emission. In this work, a green and efficient route was developed to extract V from VS without roasting by electro-oxidation combined with ultrasound cavitation (EOUC) intensification in sulfuric acid solution. The leaching parameters (e.g., leaching temperature, sulfuric acid concentration, anodic current density, ultrasound power, liquid to solid ratio, leaching time and particle size) were optimized. The leaching mechanism was explored by comparing the leaching behavior and mineralogical evolution of the direct sulfuric acidic leaching (DSL), electro-oxidation-assisted sulfuric acidic leaching (EOSL), ultrasound cavitation-assisted sulfuric acidic leaching (UCSL) and EOUC methods. The results show that introducing electric field strengthens the ultrasound cavitation effect on slag particles in sulfuric acid solution. Under the optimum parameter of EOUC method, the leaching rate of V from VS is as high as 94.64 %. Using EOUC method can open the silicate-wrapped structure of the spinel, increase pore volume of VS from 0.00127 cm3 g-1 to 0.01124 cm3 g-1, decrease slag particle size from 26.8 μm to 16.4 μm and improve specific surface area from 0.508 m2 g-1 to 10.855 m2 g-1, which significantly accelerate V leaching process. The exposed spinel was oxidized by both electrochemical route and chemical route, forming a mixture of V3+ ion and VO2+ ion after leaching.

Influence of static pressure on toluene oxidation efficiency in groundwater by micro-nano bubble ozonation

Micro-nano bubble ozonation has been widely applied in the purification of drinking water due to its superior characteristics such as high mass transfer rate and long resistance time. However, its application in groundwater remediation is limited, partially due to the unclear effect of static water pressure on the oxidation efficiency. This study constructed a batch reactor to investigate the influence of static pressure on toluene oxidation by ozone micro-nano bubble water. To achieve constant pressure, weight was added above the mobile reactor roof, and the initial concentrations of toluene and dissolved ozone were 1.00 mg L-1 and 0.68 mg L-1 respectively. Experimental results demonstrated that as the static water pressure increased from 0.0 to 2.5 m, the average microbubble diameter decreased significantly from 62.3 to 36.0 μm. Simultaneously, the oxidation percentage of toluene increased from 40.3% to 58.7%, and the reaction rate between toluene and hydroxyl radical (OH·) increased from 9.3 × 109 to 1.39 × 1010 M-1 s-1, indicating that the shrinkage of micro-nano bubbles generated an abundance of OH· that quickly oxidized toluene adsorbed at the bubble interface. A greater enhancement of oxidation efficiency for nitrobenzene, as compared to p-xylene, was observed after the addition of 2.5 m water pressure, which verified the larger contribution of OH· under static pressure. Although the improvement of oxidation efficiency was reduced under acid and alkaline environments, as well as in practical groundwater matrices, the overall results still demonstrated the promising application of micro-nano bubble ozonation in groundwater remediation.

Water Microdroplets-Initiated Methane Oxidation

The special redox reactivity of water microdroplets causes "mild ignition" of methane gas to form methane oxygenates. The C(sp3)-H bond of methane can be activated by the hydroxyl radical (OH·) or the hydrogen radical (H·) across the air-water interface (AWI) of microdroplets to generate the methyl radical (CH3·). Once CH3· is formed, it undergoes free-radical reactions with O2 in the air, excessive OH· and H· across the AWI, and H2O2 present at the AWI and generated CH3· itself to produce methanol and other species. Production of the methanol and other oxygenates was confirmed by gas chromatography, mass spectrometry, and 1H- and 13C-nuclear magnetic resonance. Formic acid, acetic acid, ethanol, carbon dioxide, and methyl peroxide were also detected as methane oxidation byproducts. This water microdroplet-initiated oxidation process can be further enhanced under ultrasonication to yield 2.66 ± 0.77 mM methanol conversion from the methane gas in a single spray run for 30 min, with a selectivity of 19.2% compared with all other oxygenated species.

Thermal Oscillations of Nanobubbles

Nanobubble cavitation is advancing technologies in enhanced wastewater treatment, cancer therapy and diagnosis, and microfluidic cleaning. Current macroscale models predict that nanobubble oscillations should be isothermal, yet recent studies suggest that they are adiabatic with an associated increase in natural frequency, which becomes challenging when characterizing nanobubble sizes using ultrasound in experiments. We derive a new theoretical model that considers the nonideal nature of the nanobubble's internal gas phase and nonequilibrium effects, by employing the van der Waals (vdW) equation of state and implementing a temperature jump term at the liquid-gas interface, respectively, finding excellent agreement with molecular dynamics (MD) simulations. Our results reveal how adiabatic behavior could be erroneously interpreted when analyzing the thermal response of the gas using the commonly employed polytropic process and explain instead how nanobubble oscillations are physically closer to their isothermal limit.