1
|
Luenam S, Bantuchai T, Kosiyatrakul A, Chanpoo M, Phakdeewisetkul K, Puncreobutr C. Precision of computed tomography and cartilage-reproducing image reconstruction method in generating digital model for potential use in 3D printing of patient-specific radial head prosthesis: a human cadaver study. 3D Print Med 2021; 7:3. [PMID: 33507428 PMCID: PMC7842042 DOI: 10.1186/s41205-021-00093-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2020] [Accepted: 01/10/2021] [Indexed: 11/28/2022] Open
Abstract
Background A prosthetic replacement is a standard treatment for an irreparable radial head fracture; however, the surface mismatch of the commercially available designs is concerned for the long-term cartilage wear. The patient-specific implant created from 3D printing technology could be favorable in replicating the normal anatomy and possibly reduce such sequela. Our study aimed to assess the precision of the computed tomography (CT) and cartilage-reproducing image reconstruction method (CIRM) in generating digital models for potentially use in manufacturing the patient-specific prosthesis from 3D printing. Methods Eight intact elbows (3 right and 5 left) from 7 formalin-embalmed cadavers (4 males and 3 females) with mean age of 83 years (range, 79–94 years) were used for this study. Computerized 3D models were generated from CT, and CIRM. The cartilage-reproducing image reconstruction method has compensated the cartilage profile based on the distance between the subchondral surfaces of the radial head and surrounding bones in CT images. The models of actual radial head geometry used as the gold standard was generated from CT arthrography (CTA). All models of each specimen were matched by registering the surface area of radial neck along with the tuberosity. The difference of head diameter, head thickness, and articular disc depth among three models was evaluated and analyzed by Friedman ANOVA and multiple comparison test using Bonferroni method for statistical correction. A p-value of less than 0.01 was considered statistically significant. The difference of overall 3D geometry was measured with the root mean square of adjacent point pairs. Results The analysis displayed the difference of diameter, thickness, and disc depth across the models (p< 0.01). Pairwise comparisons revealed statistically significant difference of all parameters between CTA models and CT models (p< 0.01) whereas no difference was found between CTA models and CIRM models. The mean difference of overall 3D geometry between CTA models and CT models was 0.51±0.24 mm, and between CTA models and CIRM models was 0.24±0.10 mm. Conclusions CIRM demonstrated encouraging results in reestablish the normal anatomy and could be potentially used in production process of 3D printed patient-specific radial head prosthesis.
Collapse
Affiliation(s)
- Suriya Luenam
- Department of Orthopaedics, Phramongkutklao Hospital and College of Medicine, 315 Ratchawithi Road, Bangkok, 10400, Thailand.
| | - Theeraset Bantuchai
- Department of Orthopaedics, Phramongkutklao Hospital and College of Medicine, 315 Ratchawithi Road, Bangkok, 10400, Thailand
| | - Arkaphat Kosiyatrakul
- Department of Orthopaedics, Phramongkutklao Hospital and College of Medicine, 315 Ratchawithi Road, Bangkok, 10400, Thailand
| | - Malee Chanpoo
- Department of Anatomy, Phramongkutklao Hospital and College of Medicine, Bangkok, Thailand
| | | | - Chedtha Puncreobutr
- Advanced Materials Analysis Research Unit, Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand
| |
Collapse
|
2
|
Berkmortel C, Langohr GDG, King G, Johnson J. Hemiarthroplasty implants should have very low stiffness to optimize cartilage contact stress. J Orthop Res 2020; 38:1719-1726. [PMID: 32017162 DOI: 10.1002/jor.24610] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 08/12/2019] [Revised: 11/15/2019] [Accepted: 01/21/2020] [Indexed: 02/04/2023]
Abstract
Hemiarthroplasty is often preferred to total arthroplasty as it preserves native tissue; however, accelerated wear of the opposing cartilage is problematic. This is thought to be caused by the stiffness mismatch between the implant and cartilage-bone construct. Reducing the stiffness of the implant by changing the material has been hypothesized as a potential solution. This study employs a finite element model to study a concave-convex hemiarthroplasty articulation for various implant materials (cobalt-chrome, pyrolytic carbon, polyether ether ketone, ultra-high-molecular-weight polyethylene, Bionate-55D, Bionate-75D, and Bionate-80A). The effect of the radius of curvature and the degree of flexion-extension was also investigated to ensure any relationships found between materials were generalizable. The implant material had a significant effect (P < .001) for both contact area and maximum contact pressure on the cartilage surface. All of the materials were different from the native state except for Bionate-80A at two of the different flexion angles. Bionate-80A and Bionate-75D, the materials with the lowest stiffnesses, were the closest to the native state for all flexion angles and radii of curvature. No evident difference between materials occurred unless the modulus was below that of Bionate-55D (288 MPa), suggesting that hemiarthroplasty materials need to be less stiff than this material if they are to protect the opposing cartilage. This is clinically significant as the findings suggest that the development of new hemiarthroplasty implants should use materials with stiffnesses much lower than currently available devices.
Collapse
Affiliation(s)
- Carolyn Berkmortel
- Department of Mechanical and Materials Engineering, Western University, London, Ontario, Canada
| | - G Daniel G Langohr
- Department of Mechanical and Materials Engineering, Western University, London, Ontario, Canada.,Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, Lawson Health Research Institute, St Joseph's Health Care, Western University, Bone and Joint Institute, London, Ontario, Canada.,Department of Surgery, Western University, London, Ontario, Canada
| | - Graham King
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, Lawson Health Research Institute, St Joseph's Health Care, Western University, Bone and Joint Institute, London, Ontario, Canada.,Department of Surgery, Western University, London, Ontario, Canada
| | - James Johnson
- Department of Mechanical and Materials Engineering, Western University, London, Ontario, Canada.,Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, Lawson Health Research Institute, St Joseph's Health Care, Western University, Bone and Joint Institute, London, Ontario, Canada.,Department of Surgery, Western University, London, Ontario, Canada
| |
Collapse
|
3
|
Hemmingsen CK, Thillemann TM, Elmengaard B, de Raedt S, Nielsen ET, Mosegaard SB, Stentz-Olesen K, Stilling M. Elbow Biomechanics, Radiocapitellar Joint Pressure, and Interosseous Membrane Strain Before and After Radial Head Arthroplasty. J Orthop Res 2020; 38:510-522. [PMID: 31595550 DOI: 10.1002/jor.24488] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/04/2019] [Accepted: 09/17/2019] [Indexed: 02/04/2023]
Abstract
Complex radial head fracture and elbow instability can be treated with radial head arthroplasty. Good clinical results have been described after this surgical treatment. However, the revision and complication rate reported in the literature is concerning. This might be due to altered kinematics after radial head arthroplasty. Eight human native elbows were examined with dynamic radiostereometric analysis and compared with a radial head arthroplasty. Translations of the radial head in the x-, y-, and z-directions relative to the humerus and the ulna were measured. The radiocapitellar joint pressure was measured using a pressure sensor. The tension within the interosseous membrane was measured using a custom-made strain gauge. After radial head arthroplasty, the radial head was displaced approximately 1.8 mm medially and 1.4 mm distally at the starting point. During unloaded flexion motion the difference in all translations between the native radial head and the radial head arthroplasty was less than 1 mm (95% confidence interval [CI] ± 0.5 mm) (p = 0.001). With loading the difference was less than 1.5 mm (95% CI ± 1.5 mm) (p = 0.001). The mean difference in radiocapitellar joint contact pressure was less than 0.30 MPa (95% CI ± 0.40 MPa) (p = 0.001) during unloaded flexion motion. There were only submillimetre kinematic changes and small changes in joint pressure and interosseous membrane tension after the insertion of a radial head arthroplasty in an experimental setting. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:510-522, 2020.
Collapse
Affiliation(s)
- Chalotte K Hemmingsen
- Department of Clinical Medicine, Aarhus University, Groennehaven 25, 8520 Lystrup, Aarhus, Denmark.,Orthopedic Research Unit, Aarhus University Hospital, Aarhus, Denmark
| | - Theis M Thillemann
- Department of Orthopedic Surgery, Shoulder and Elbow Section, Aarhus University Hospital, Aarhus, Denmark
| | - Brian Elmengaard
- Department of Orthopedic Surgery, Shoulder and Elbow Section, Aarhus University Hospital, Aarhus, Denmark
| | | | - Emil T Nielsen
- Department of Clinical Medicine, Aarhus University, Groennehaven 25, 8520 Lystrup, Aarhus, Denmark.,Orthopedic Research Unit, Aarhus University Hospital, Aarhus, Denmark.,Department of Orthopedic Surgery, Hand Section, Aarhus University Hospital, Aarhus, Denmark
| | - Sebastian B Mosegaard
- Department of Clinical Medicine, Aarhus University, Groennehaven 25, 8520 Lystrup, Aarhus, Denmark.,Department of Orthopedic Surgery, Hand Section, Aarhus University Hospital, Aarhus, Denmark
| | | | - Maiken Stilling
- Department of Clinical Medicine, Aarhus University, Groennehaven 25, 8520 Lystrup, Aarhus, Denmark.,Orthopedic Research Unit, Aarhus University Hospital, Aarhus, Denmark.,Department of Orthopedic Surgery, Hand Section, Aarhus University Hospital, Aarhus, Denmark
| |
Collapse
|
4
|
Szmit J, King GJW, Johnson JA, Langohr GDG. The effect of stem fit on the radiocapitellar contact mechanics of a metallic axisymmetric radial head hemiarthroplasty: is loose fit better than rigidly fixed? J Shoulder Elbow Surg 2019; 28:2394-2399. [PMID: 31371158 DOI: 10.1016/j.jse.2019.05.019] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 01/23/2019] [Revised: 05/10/2019] [Accepted: 05/13/2019] [Indexed: 02/01/2023]
Abstract
BACKGROUND Radial head hemiarthroplasty is commonly used to manage comminuted displaced fractures. Regarding implant fixation, current designs vary, with some prostheses aiming to achieve a tight "fixed" fit and others using a smooth stem with an over-reamed "loose" fit. The purpose of this study was to evaluate the effect of radial head hemiarthroplasty stem fit on radiocapitellar contact using a finite element model that simulated both fixed (size-for-size) and loose (1-, 2-, and 3-mm over-reamed) stem fits. It was hypothesized that a loose stem fit would improve radiocapitellar contact mechanics, with an increased contact area and decreased contact stress, by allowing the implant to find its "optimal" position with respect to the capitellum. METHODS Finite element models of the elbow were produced to compare the effects of stem fit on radiocapitellar contact of a metallic axisymmetric radial head implant. Radiocapitellar contact mechanics (contact area and maximum contact stress) were computed for 0°, 45°, 90°, and 135° of elbow flexion with the forearm in neutral rotation, pronation, and supination. RESULTS The data suggest that the loose smooth stem radial head implant may be functioning like a bipolar implant in optimizing radiocapitellar contact. Over-reaming of 3 mm produced a larger amount of stress concentration on the capitellum, suggesting there may be a limit to how loose a smooth stem implant should be implanted. CONCLUSIONS The loose 1 to 2 mm over-reamed stem provided optimal contact mechanics of the metallic axisymmetric radial head implant compared with the fixed stem.
Collapse
|
5
|
Wegmann K, Knowles N, Lalone E, Müller LP, Athwal GS, King GJW. Computed Tomography Analysis of the Radial Notch of the Ulna. J Hand Surg Am 2019; 44:794.e1-794.e8. [PMID: 30502012 DOI: 10.1016/j.jhsa.2018.10.010] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/09/2017] [Revised: 08/19/2018] [Accepted: 10/09/2018] [Indexed: 02/02/2023]
Abstract
PURPOSE The anatomy of the radial head and capitellum has been extensively studied; however, the anatomy of the radial notch of the ulna (RNU) has received little attention. This imaging-based anatomic study characterizes the morphology of the RNU. METHODS Ninety-eight cadaveric arms (57 male, 72 ± 14 y) were imaged with computed tomography, and 3-dimensional reconstructions of the proximal ulna were constructed. The anteroposterior and proximal-distal dimensions of the RNU as well as the radius of curvature at standardized levels were measured in 2-mm increments. The orientation of the RNU was also determined. RESULTS The proximal-distal and anteroposterior dimensions of the RNU were 12 ± 2 mm (range, 7-16 mm) and 18 ± 3 mm (range, 12-24 mm), respectively. The average radius of curvature of the RNU was 15 ± 0 mm (range, 15-16 mm). The radius of curvature did not change significantly when comparing the proximal and distal aspect of the RNU. The RNU was rotated 33° ± 2° (range, 31° to 38°) externally relative to the transverse plane of the ulna. The average depth of the RNU at its deepest point was 2.2 ± 0.4 mm (range, 1.5-2.7 mm). The depth decreased from proximal to distal, being most shallow distally. The depth changed by an increase of the radius of curvature, as well as by rotation in the frontal plane. CONCLUSIONS The RNU anatomy was variable, generally extending laterally from proximal to distal. This suggests that a radial head implant should taper from proximal to distal to optimize contact at the RNU. CLINICAL RELEVANCE The present study investigates the detailed anatomy of the radial notch of the ulna using computed tomography scans. The data might help improve the design of prosthetic components.
Collapse
Affiliation(s)
- Kilian Wegmann
- Center for Orthopedic and Trauma Surgery, University Medical Center of Cologne, Cologne, Germany.
| | - Nikolas Knowles
- Roth
- McFarlane Hand and Upper Limb Center, St Joseph's Health Care, University of Western Ontario, London, Ontario, Canada
| | - Emily Lalone
- Roth
- McFarlane Hand and Upper Limb Center, St Joseph's Health Care, University of Western Ontario, London, Ontario, Canada
| | - Lars P Müller
- Center for Orthopedic and Trauma Surgery, University Medical Center of Cologne, Cologne, Germany
| | - George S Athwal
- Roth
- McFarlane Hand and Upper Limb Center, St Joseph's Health Care, University of Western Ontario, London, Ontario, Canada
| | - Graham J W King
- Roth
- McFarlane Hand and Upper Limb Center, St Joseph's Health Care, University of Western Ontario, London, Ontario, Canada
| |
Collapse
|
6
|
Sun Y, Hong H, Adikrishna A, Kim YJ, Jeon IH. Contact Mechanics of Anatomic Radial Head Prosthesis: Comparison Between Native Radial Head and Anatomic Radial Head Prostheses in the Dynamic Mode. J Hand Surg Am 2019; 44:517.e1-517.e7. [PMID: 30292716 DOI: 10.1016/j.jhsa.2018.08.005] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 05/11/2017] [Revised: 06/26/2018] [Accepted: 08/08/2018] [Indexed: 02/02/2023]
Abstract
PURPOSE The biomechanical characteristics of anatomic radial head prostheses have not been completely investigated. We compared and analyzed the contact kinematic characteristics of the native radial head and radial head prostheses replicating the native head contour, using a real-time flexion simulation model. METHODS Ten fresh-frozen cadavers were used in this pilot study. A simulating dynamic motion mode from 0° to 130° of elbow flexion was applied. Radiocapitellar contact pressure and area were measured using a real-time digitized pressure sensor. Further, contact area and pressure curves were obtained during flexion, using a motion-tracking device. RESULTS The mean contact area, mean contact pressure, and peak contact pressure of the native radial head and radial head prosthesis were 39 mm2, 0.0078 kgf/mm2, 0.0123 kgf/mm2, and 33 mm2, 0.0093 kgf/dm2, 0.0148 kgf/mm2, respectively. The contact area and pressure curves were parabolic nonlinear for the radial head prosthesis and more linear for the native radial head. CONCLUSIONS The radial head prosthesis mimics the mechanics of the native radial head in terms of mean contact area, mean contact pressure, and peak contact pressure; however, different patterns of contact pressure and area curves during elbow flexion-extension were observed. CLINICAL RELEVANCE We found that the biomechanics of the anatomic radial head prostheses used in the study were similar to those of the native radial head.
Collapse
Affiliation(s)
- Yucheng Sun
- Department of Orthopedic Surgery, ASAN Medical Center, College of Medicine, University of Ulsan, Seoul, Korea
| | - Hanpyo Hong
- Department of Orthopedic Surgery, ASAN Medical Center, College of Medicine, University of Ulsan, Seoul, Korea
| | - Arnold Adikrishna
- Department of Orthopedic Surgery, ASAN Medical Center, College of Medicine, University of Ulsan, Seoul, Korea
| | - Yoon-Jeong Kim
- Department of Orthopedic Surgery, ASAN Medical Center, College of Medicine, University of Ulsan, Seoul, Korea
| | - In-Ho Jeon
- Department of Orthopedic Surgery, ASAN Medical Center, College of Medicine, University of Ulsan, Seoul, Korea.
| |
Collapse
|
7
|
Abstract
OBJECTIVE To evaluate the effect of intentional undersizing of prosthetic radial head implant diameters on joint contact pressures. METHODS Eight fresh-frozen cadaveric elbows were aligned in neutral extension and loaded with 100 N using a custom testing apparatus. Radiocapitellar contact pressures were recorded using a Tekscan thin-film pressure sensor. Prosthetic radial head replacement was performed with 2 prostheses: the Anatomic Radial Head and the Evolve Proline Radial Head prostheses. Each design was sized according to the manufacturer's recommendations and then again using 2-mm smaller radial heads. RESULTS Average and peak pressures were significantly higher with the Evolve than the Anatomic prostheses (P < 0.03 and 0.02, respectively). Peak pressures decreased from 4.2 ± 0.5 MPa to 2.9 ± 0.3 MPa for the Anatomic Radial Heads and from 5.6 ± 0.5 MPa to 3.9 ± 0.6 MPa when the Evolve Radial Heads were undersized by 2 mm. The mean pressures of the Anatomic Radial Heads (1.4 ± 0.1 MPa) did not change significantly with undersizing (1.3 ± 0.1 MPa, P = 0.12), whereas the mean pressures of the Evolve Radial Heads (1.6 ± 0.1 MPa) were significantly reduced with undersizing (1.4 ± 0.1 MPa, P < 0.02). CONCLUSION Both mean and peak pressures were initially high for the Evolve Radial Head sized based on the short axis diameter and were improved with further undersizing by 2 mm. Peak, but not mean, contact pressures were improved by undersizing the Anatomic prosthesis based on the long axis diameter. CLINICAL RELEVANCE These findings support the clinical recommendation of some surgeons to undersize the Evolve prosthesis by 2-mm smaller diameter than the current manufacturer's suggestion and give reason to consider doing the same for the Anatomic prosthesis.
Collapse
|
8
|
Abstract
Background/purpose Radial head replacement is frequently used in treatment of radial head fractures or sequela. Impossibility to restore a correct anatomy, acute elbow traumatic instability and failure of osteosynthesis hardware are the most common indications. The authors describe their case studies and results on the implantation of various radial head prostheses. Materials Between June 2005 and June 2016, 28 radial head prostheses were implanted in the same number of patients with an average follow-up of 49 months (6–104). Indications for implantation were: Mason type III and IV radial head fractures and post-traumatic arthritis due to failure of previous treatments. Monopolar prostheses were used and were press-fit implanted via Kaplan’s lateral access and Kocher’s anconeus approach to the humeroradial joint. At the follow-up, assessments were made of the pain, according to the visual analogic scale, range of motion (ROM), stability and functionality according to the Mayo Elbow Performance Score, presence of osteolysis and mobilization during radiography tests, personal satisfaction of the patients, Disabilities of the Arm, Shoulder and Hand and Patient-Rated Wrist Evaluation outcomes measurements. Results At the follow-up, we recorded an average level of pain of 1.8 in patients under acute treatments for radial head fractures and a marked reduction in the remaining cases from 6.7 to 2.1. ROM was found on average to be 107° of flexion–extension and 159° of pronosupination. Personal satisfaction was good–excellent in 23 cases. There was no case of infection; removal of the implant was necessary in three cases due to mobilization of the stem and oversized implants. In six cases, bone resorption was seen at the level of the prosthetic collar and it was in all cases asymptomatic. Conclusions The results of this study suggest that the use of prostheses, if well positioned, is a valid solution in the treatment of secondary arthritis and fractures of the radial head with poor prognosis, with good results in the reduction of pain, recovery of movement and improved quality of life.
Collapse
|
9
|
Lalone EA, Shannon HL, Deluce SR, Giles JW, King GJW, Johnson JA. Effect of Radial Head Implant Shape on Radiocapitellar Joint Congruency. J Hand Surg Am 2017; 42:476.e1-476.e11. [PMID: 28450100 DOI: 10.1016/j.jhsa.2017.03.009] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 04/26/2016] [Revised: 02/14/2017] [Accepted: 03/09/2017] [Indexed: 02/02/2023]
Abstract
PURPOSE Radial head arthroplasty is indicated in displaced fractures in which comminution precludes successful internal fixation. Many types of radial head implants have been developed varying in material, methods of fixation, and degrees of modularity and geometry. The purpose of this study was to investigate the effect of radial head implant shape on radiocapitellar joint congruency. METHODS Joint congruency was quantified in 7 cadaveric specimens employing a registration and inter-surface distance algorithm and 3-dimensional models obtained using computed tomography. Forearm rotation was simulated after computer-guided implantation of an axisymmetric radial head, a population-based quasi-anatomic radial head implant, and a reverse-engineered anatomic radial head implant. Inter-surface distances were measured to investigate the relative position of the radial head implant and displayed on 3-dimensional color-contour maps. Surface area was measured for inter-surface distances (1.5 mm) and compared for each radial head geometry. RESULTS There were no statistical differences in the contact surface area between radial head implants during active or passive forearm rotation. The joint was more congruent (larger contact surface area) during active forearm rotation compared with passive forearm rotation. CONCLUSIONS This study investigated the effect of implant geometry on the radiocapitellar joint contact mechanics by examining a commercially available radial head system (axisymmetric), a quasi-anatomic design, and an anatomic reverse-engineered radial head implant. We found no statistical differences in radiocapitellar joint contact mechanics as measured by 3-dimensional joint congruency in cadaveric specimens undergoing continuous simulated forearm rotation. CLINICAL RELEVANCE The importance of choosing an implant that matches the general size of the native radial head is recognized, but the degree to which it is necessary to create an implant that replicates the native anatomy to restore elbow stability and prevent cartilage degenerative changes remains unclear. This study concluded that the geometry of the implant did not have a statistically significant effect on joint contact mechanics; therefore, future work is needed to examine additional factors related to implant design, such as material choice and implant positioning to investigate their influence on joint contact mechanics.
Collapse
Affiliation(s)
- Emily A Lalone
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, St Joseph's Hospital, London, Canada
| | - Hannah L Shannon
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, St Joseph's Hospital, London, Canada
| | - Simon R Deluce
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, St Joseph's Hospital, London, Canada
| | - Joshua W Giles
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, St Joseph's Hospital, London, Canada
| | - Graham J W King
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, St Joseph's Hospital, London, Canada; Department of Surgery, University of Western Ontario, London, Canada
| | - James A Johnson
- Bioengineering Laboratory, Roth McFarlane Hand and Upper Limb Centre, St Joseph's Hospital, London, Canada; Department of Mechanical and Materials Engineering, University of Western Ontario, London, Canada.
| |
Collapse
|
10
|
Willing R, King GJ, Johnson JA. Contact mechanics of reverse engineered distal humeral hemiarthroplasty implants. J Biomech 2015; 48:4037-4042. [DOI: 10.1016/j.jbiomech.2015.09.047] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2015] [Revised: 08/27/2015] [Accepted: 09/27/2015] [Indexed: 11/29/2022]
|