High efficient catalytic degradation of tetracycline and ibuprofen using visible light driven novel Cu/Bi2Ti2O7/rGO nanocomposite: Kinetics, intermediates and mechanism

Synergistic photocatalytic degradation of methylene blue and ibuprofen using Co₃O₄-Decorated hexagonal boron nitride (hBN) composites under Sun-like irradiation

In this study, we report the synthesis and photocatalytic performance of Co₃O₄-decorated hexagonal boron nitride (hBN) composites for degrading methylene blue (MB) and ibuprofen (IBF) under sunlight irradiation. Using a dry impregnation method, the composites were prepared with varying Co₃O₄ loadings (0.5%, 1%, 2%). Comprehensive characterization confirmed the successful incorporation and uniform distribution of Co₃O₄ on the hBN matrix. Photocatalytic experiments revealed that 1% Co₃O₄-hBN composite exhibited the highest activity, achieving nearly 100% MB degradation in 60 min and 90% IBF degradation in 120 min. The enhanced photocatalytic efficiency is attributed to the synergistic effects between Co₃O₄ and hBN, which extend light absorption and promote charge separation. Our findings demonstrate the potential of Co3O₄-decorated hBN composites as effective photocatalysts for environmental remediation. The study provides a foundation for further exploration of these materials, including their long-term stability and application to a broader range of pollutants.

Synergistic design of CuO/CoFe₂O₄/MWCNTs ternary nanocomposite for enhanced photocatalytic degradation of tetracycline under visible light

This study involves a novel CuO/CoFe₂O₄/MWCNTs (CCT) nanocomposite, developed by integrating cobalt ferrite (CoFe₂O₄) and copper oxide (CuO) nanoparticles onto multi-walled carbon nanotubes (MWCNTs), for the degradation of tetracycline (TC) under visible light. The photocatalyst was extensively characterized using XRD, HR-SEM, EDX, HR-TEM, UV-Vis, BET, and PL analysis. The synthesized CoFe₂O₄ and CuO nanoparticles exhibited crystallite sizes of 46.8 nm and 37.5 nm, respectively, while the CCT nanocomposite had a crystallite size of 53 nm. Microscopy confirmed a particle size of 49.2 nm for the nanocomposite, with MWCNTs measuring 15.65 nm in diameter. The band gap energy of the CCT nanocomposite was 1.6 eV, which contributed to its enhanced photocatalytic activity, as evidenced by the lower emission intensity in PL analysis. BET analysis revealed a pore volume of 0.37 cc/g and a surface area of 82.3 m²/g. Photocatalytic performance was tested across various conditions, with adjustments to nanocomposite dosages (0.1-0.5 g/L), TC concentrations (5-25 mg/L), and pH levels (2-10). Under optimized conditions (0.3 g/L CCT, 5 mg/L TC, pH 10, 120 min of visible light exposure), the CCT achieved 98.1% degradation of TC. The optimized parameters were subsequently used to assess TC degradation with individual photocatalysts: CoFe₂O₄, CuO, CT, and CCT. The enhanced photocatalytic efficiency observed can be largely attributed to the improved charge transfer dynamics and effective electron-hole separation facilitated by MWCNT doping. The reaction followed a pseudo-first-order kinetic model, with hydroxyl radicals (OH•) identified as the key species in the degradation process. Moreover, the catalyst exhibited 96% retention of its photocatalytic efficiency after five consecutive cycles, demonstrating exceptional stability and reusability. These results emphasize the CCT composite's potential as a highly efficient and sustainable photocatalyst for the remediation of pharmaceutical pollutants in aquatic systems.

Bioinspired graphene-based metal oxide nanocomposites for photocatalytic and electrochemical performances: an updated review

Considering the rapidly increasing population, the development of new resources, skills, and devices that can provide safe potable water and clean energy remains one of the vital research topics for the scientific community. Owing to this, scientific community discovered such material for tackle this issue of environment benign, the new materials with graphene functionalized derivatives show significant advantages for application in multifunctional catalysis and energy storage systems. Herein, we highlight the recent methods reported for the preparation of graphene-based materials by focusing on the following aspects: (i) transformation of graphite/graphite oxide into graphene/graphene oxide via exfoliation and reduction; (ii) bioinspired fabrication or modification of graphene with various metal oxides and its applications in photocatalysis and storage systems. The kinetics of photocatalysis and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) for the optimization of the degradation efficiency of organic dyes, phenol compounds, antibiotics, and pharmaceutical drugs are discussed. Further, we present a brief introduction on different graphene-based metal oxides and a systematic survey of the recently published research literature on electrode materials for lithium-ion batteries (LIBs), supercapacitors, and fuel cells. Subsequently, the power density, stability, pseudocapacitance charge/discharge process, capacity and electrochemical reaction mechanisms of intercalation, and conversion- and alloying-type anode materials are summarized in detail. Furthermore, we thoroughly distinguish the intrinsic differences among underpotential deposition, intercalation, and conventional pseudocapacitance of electrode materials. This review offers a meaningful reference for the construction and fabrication of graphene-based metal oxides as effective photocatalysts for photodegradation study and high-performance optimization of anode materials for LIBs, supercapacitors, and fuel cells.

Development of Co3O4/TiO2/rGO photocatalyst for efficient degradation of pharmaceutical pollutants with effective charge carrier recombination suppression

Pharmaceutical contaminations in the water resources becomes very serious global environmental issue. Therefore, these pharmaceutical molecules should be removed from the water resources. In the current work, 3D/3D/2D-Co3O4/TiO2/rGO nanostructures were synthesized through a facile self-assembly-assisted solvothermal method for an effective removal of pharmaceutical contaminations. The nanocomposite was finely optimized through the response surface methodology (RSM) technique with different initial reaction parameters and different molar ratios. Various characterization techniques were used to understand the physical and chemical properties of 3D/3D/2D heterojunction and its photocatalytic performance. The degradation performance of ternary nanostructure was rapidly increased owing formation of 3D/3D/2D heterojunction nanochannels. The 2D-rGO nanosheets play an essential role in trapping photoexcited charge carriers to reduce the recombination process rapidly as confirmed by photoluminescence analysis. Tetracycline and ibuprofen were used as model carcinogen molecules to examine the degradation efficiency of Co3O4/TiO2/rGO under visible light irradiation using halogen lamp. The intermediates produced during the degradation process were studied using LC-TOF/MS analysis. The pharmaceutical molecules tetracycline and ibuprofen follows pseudo first order kinetics model. The photodegradation results show that the 6:4 M ratio of Co3O4:TiO2 with 5% rGO exhibits 12.4 times and 12.3 higher degradation ability than pristine Co3O4 nanostructures against tetracycline and ibuprofen, respectively. These results shows high efficiency of Co3O4/TiO2/rGO composite against the degradation of tetracycline and ibuprofen.

Comprehensive analysis of NiFe2O4/MWCNTs nanocomposite to degrade a healthcare waste - tetracycline

Tetracycline (TC), a commonly used antibiotic for studying bacterial illnesses in living organisms, poses a significant risk to the aquatic environment. Despite various conventional methods having been attempted to remove TC antibiotics from water solutions, they have not proven effective. Consequently, the focus of the research is on the photocatalytic degradation of TC. According to the research, MWCNTs were successfully incorporated into NiFe2O4 nanoparticles, which reduced the pace at which charge carriers recombined after joining with MWCNTs. Subsequently, the catalyst's efficacy was assessed in a batch reactor by analyzing the weight percentage change of the nanocomposite, the initial concentration of TC antibiotics, the effects of pH and contact time. The identical operational parameters were employed to investigate the degradation of TC using NiFe2O4 and MWCNTs as individual pure materials. The findings indicated that the photocatalytic process using NiFe2O4/MWCNTs achieved a degradation efficiency of 95.8% for TC at a pH value of 9. This result was obtained after a reaction time of 120 minutes, the concentration of TC solution was 10 mg L-1, with a nanocomposite dose of 0.6 g L-1 of TN 04 and 120 W m-2. The pseudo-first-order approach was used to estimate the rate at which TC degrades. After four consecutive uses, it was observed that the photocatalysts maintained their original properties, with only a slight decrease of approximately 2.4% in the removal efficiency. The study demonstrated that the NiFe2O4/MWCNTs nanocomposite exhibited considerable efficiency in degrading TC. Due to its simple manufacture and useful recovery, it has the potential to function well as a catalyst for the removal and degradation of pharmaceutical organic contaminants.

Effective removal of azithromycin by novel g-C3N4/CdS/CuFe2O4 nanocomposite under visible light irradiation

In this study, the visible light active pristine, binary and ternary g-C₃N₄/CdS/CuFe₂O₄ nanocomposite is prepared through a coprecipitation-assisted hydrothermal technique. The characterization of the as-synthesized catalysts was conducted using various analytical techniques. When compared with pristine and binary nanocomposites, the ternary g-C₃N₄/CdS/CuFe₂O₄ nanocomposite exhibits higher photocatalytic degradation of azithromycin (AZ) under a visible light source. Ternary nanocomposite exhibits high AZ removal efficiency of about 85% within 90 min of the photocatalytic degradation experiment. Enhanced the visible light absorption ability and the suppression of photoexcited charge carriers is also achieved by forming heterojunctions between pristine materials. The ternary nanocomposite exhibited ∼2 times higher degradation efficiency than CdS/CuFe₂O₄ nanoparticles and ∼3 times higher degradation efficiency than CuFe₂O₄. The trapping experiments were conducted and it shows superoxide radicals (O₂^•-) are the predominant reactive species involved in the photocatalytic degradation reaction. This study provided a promising approach for the treatment of contaminated water using g-C₃N₄/CdS/CuFe₂O₄ as a photocatalyst.

Fe-N co-doped coral-like hollow carbon shell toward boosting peroxymonosulfate activation for efficient degradation of tetracycline: Singlet oxygen-dominated non-radical pathway

Fe-N co-doped coral-like hollow carbon shell (Fe-N-CS) was synthesized via a simply impregnation-pyrolysis method. The Fe-N-CS showed an excellent ability for activating peroxymonosulfate (PMS), which could degrade about 93.74% tetracycline (20 mg/L) in 12 min. The Fe-N-CS/PMS system exhibited a good anti-interference capacity of various pH, inorganic anions, HA and different water qualities. More importantly, the Fe nanoparticles were anchored uniformly in the carbon layer, effectively limiting the metal leaching. The quenching tests and electron spin resonance (ESR) manifested that non-radical singlet oxygen (¹O₂) was the main reactive oxygen species (ROS) for TC degradation. The mechanism study showed that Fe nanoparticles, defect and graphite N played a key role in activating PMS to produce ROS. Moreover, three probable degradation pathways were proposed by using LC-MS measurements. Generally, this work had a new insight for the synthesis of heterogeneous Fe-N-C catalysts in the advanced oxidation process based on PMS.

Construction of Ag2CO3/BiOBr/CdS ternary composite photocatalyst with improved visible-light photocatalytic activity on tetracycline molecule degradation

Photocatalytic degradation was considered as a best strategy for the removal of antibiotic drug pollutants from wastewater. The photocatalyst of ABC (Ag₂CO₃/BiOBr/CdS) composite synthesized by hydrothermal and precipitation method. The ABC composite used to investigate the degradation activity of tetracycline (TC) under visible light irradiation. The physicochemical characterization methods (e.g. scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution-transmission electron microscopy (HR-TEM), ultraviolet visible spectroscopy (UV), photoluminescence (PL) and time resolved photoluminescence (TRPL) clearly indicate that the composite has been construct successfully that enhances the widened visible light absorption, induces charge transfer and separation efficiency of electron - hole pairs. The photocatalytic activity of all samples was examined through photodegradation of tetracycline in aqueous medium. The photocatalytic degradation rate of ABC catalyst could eliminate 98.79% of TC in 70 min, which is about 1.5 times that of Ag₂CO_3, 1.28 times that of BiOBr and 1.1 times that of BC catalyst, respectively. The role of operation parameters like, TC concentration, catalyst dosage and initial pH on TC degradation activity were studied. Quenching experiment was demonstrated that ·OH and O₂^·- were played a key role during the photocatalysis process that was evidently proved in electron paramagnetic resonance (EPR) experiment. In addition, the catalyst showed good activity perceived in reusability and stability test due to the synergistic effect between its components. The mechanism of degradation of TC in ABC composite was proposed based on the detailed analysis. The current study will give an efficient and recyclable photocatalyst for antibiotic aqueous pollutant removal.

Two Coordination Polymers Synthesized from Various N-Donor Clusters Spaced by Terephthalic Acid for Efficient Photocatalytic Degradation of Ibuprofen in Water under Solar and Artificial Irradiation

Two coordination polymers CP1 {[Zn(II)(BIPY)(Pht)] _n } and CP2 {[Zn(HYD)(Pht)] _n } (BIPY = 4,4'-bipyridine, Pht = terephthalic acid, and HYD = 8-hydroxyquinoline) have been successfully synthesized by a hydrothermal process using zinc aqueous solution. The so-prepared compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-visible spectroscopy, thermogravimetric analysis (TGA), and cyclic voltammetry. XRD pointed to a crystalline phase for CP1, while CP2 required recrystallization, FTIR spectroscopy established the presence of characteristic bands for all the ligands, and TGA showed thermal stability up to 100 °C. The electrochemical study showed a good charge transfer between the ligands and Zn metal for both materials. The UV-vis spectra displayed a strong absorption band spreading over a wide wavelength range, encompassing UV and visible light, with a band gap of 2.69 eV for CP1 and 2.56 eV for CP2, both of which are smaller than that of ZnO. This provides an advantageous alternative to using ZnO. The 5 × 10^-5 mol L^-1 ibuprofen decomposition kinetics under solar and UV light were studied under different irradiation conditions. Good photocatalytic properties were observed due to their high surface area.

Transformation Products of Emerging Pollutants Explored Using Non-Target Screening: Perspective in the Transformation Pathway and Toxicity Mechanism—A Review

The scientific community has increasingly focused on forming transformation products (TPs) from environmental organic pollutants. However, there is still a lot of discussion over how these TPs are generated and how harmful they are to living terrestrial or aquatic organisms. Potential transformation pathways, TP toxicity, and their mechanisms require more investigation. Non-target screening (NTS) via high-resolution mass spectrometry (HRMS) in model organisms to identify TPs and the formation mechanism on various organisms is the focus of this review. Furthermore, uptake, accumulation process, and potential toxicity with their detrimental consequences are summarized in various organisms. Finally, challenges and future research initiatives, such as performing NTS in a model organism, characterizing and quantifying TPs, and evaluating future toxicity studies on TPs, are also included in this review.

Persulfate assisted photocatalytic degradation of tetracycline by bismuth titanate under visible light irradiation

Tetracycline is a commonly used broad-spectrum antibiotic to prevent and cure the bacterial infections. However, the incompletely metabolic tetracycline molecules by organisms discharged into aquatic environment increase the ecological toxicity....

Simultaneous hydrogen production and ibuprofen degradation by green synthesized Cu2O/TNTAs photoanode

This study aimed to produce a clean energy, hydrogen, and to remove pollutants simultaneously in water by photoelectrochemical (PEC) method. The photo-anode of cuprous oxide modified titanate nanotube arrays (Cu₂O/TNTAs) was synthesized by using lactic acid, green tea, and coffee as reductants individually. The characterizations of Cu₂O/TNTAs were performed by ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), field emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) to investigate the physical and chemical properties such as structure, crystallization, element contents, and optical performance. The electrochemical analyses of Cu₂O/TNTAs showed the photo-current of Cu₂O/TNTAs-t (using green tea as reductant) was 2.4 times higher than pure TNTAs, illustrating the effective separation of electron-hole pairs after Cu₂O modification. The photoelectrochemical performances of Cu₂O/TNTAs-t and Cu₂O/TNTAs-c (using coffee as the reductant) were better than Cu₂O/TNTAs-L (using lactic acid as the reductant) in terms of photo-current density, Ibuprofen degradation, and hydrogen generation, implying that depositing Cu₂O on TNTAs can significantly improve the electron mobility by reducing the recombination rate of electron-hole pairs, which is beneficial to simultaneously ibuprofen degradation and hydrogen production.

Biodegradation of L-Valine Alkyl Ester Ibuprofenates by Bacterial Cultures

Nowadays, we consume very large amounts of medicinal substances. Medicines are used to cure, halt, or prevent disease, ease symptoms, or help in the diagnosis of illnesses. Some medications are used to treat pain. Ibuprofen is one of the most popular drugs in the world (it ranks third). This drug enters our water system through human pharmaceutical use. In this article, we describe and compare the biodegradation of ibuprofen and ibuprofen derivatives-salts of L-valine alkyl esters. Biodegradation studies of ibuprofen and its derivatives have been carried out with activated sludge. The structure modifications we received were aimed at increasing the biodegradation of the drug used. The influence of the alkyl chain length of the ester used in the biodegradation of the compound was also verified. The biodegradation results correlated with the lipophilic properties (log P).

RETRACTED: Visible-light-induced photocatalytic mitigation of ibuprofen using magnetic black TiO2-x/CaFe2O4 decorated on diatomaceous earth

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editors-in-Chief. Jun Wang and Youtao Song are listed as authors on the manuscript but have informed the journal that this occurred without their consent or knowledge of the submission and the email addresses provided were fake. Jun Wang and Youtao Song do not support the scientific conclusions of the article. Qiong Wu and Yan Chen furthermore note significant scientific errors with the article (including the wrong deconvolution method used for analysis of the XPS data, misuse of some characterization images and inability to reproduce some of the photodegradation data). One of the conditions of submission of a paper for publication is that all authors must be aware of and agree with its submission. As such this article represents a misuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

A review on analytical methods for pharmaceutical and personal care products and their transformation products

Pharmaceutical and personal care products (PPCPs) and corresponding transformation products have caused widespread concern due to their persistent emissions and potential toxicity. They have wide octanol-water partition coefficients (K_ow) and different ionization constants (pK_a) resulting in a poor analysis accuracy and efficiency. A suitable analytical method is the first prerequisite for further research on their environmental behavior to prioritize the substances. This study reviewed a full-scale analytical protocol for environmental samples in the recent ten years: from sampling to instrumental methods. Passive sampling techniques were compared and recommended for long-term continuous and scientific observation. A quick and effective sample extraction and clean-up method are highly required. Chromatographic methods coupled to mass spectrometry for determining PPCPs with a wide range of logK_ow (-7.53 to 10.80) were summed up. High-resolution mass spectrometry was confirmed to be a promising strategy for screening unknown transformation products, which would provide a nanogram level of detection limits and more accurate mass resolution. Screening strategies and mass change principles were summarized in detail. The recovery rate was important in multiple contaminants analysis identification and factors affecting the recovery rate of PPCPs were also discussed in this review, including sample matrix, target compounds characteristics, extraction method and solid-phase adsorbent. This review provides useful information for the selection of appropriate analytical methods and future development directions.

Fabrication of black TiO2-x /NiFe2O4 supported on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports a facile fabrication of black TiO_2-x /NiFe₂O₄ (Ti³⁺ self-doped titania coupled with nickel ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation. Compared with TiO_2-x or NiFe₂O₄, TiO_2-x /NiFe₂O₄ heterojunction displayed higher sonocatalytic activity, and their immobilization onto diatomaceous earth further enhanced mitigation efficiency due to the synergy between adsorption and sonocatalysis. About 96.7% of 10 mg l^-1 IBP was removed in 100 min using 0.7 g l^-1 catalyst at pH = 6, with the ultrasonic power of 144 W and frequency of 60 KHz. Quenching experiment results demonstrated the roles of reactive species. The intermediates during IBP sono-oxidation were determined by HPLC-MS method, and the acute toxicity was evaluated. Furthermore, the reaction mechanism was proposed. The sonocatalyst revealed excellent reusability, suggesting itself promising for wastewater treatment.

Simple fabrication and unprecedented visible light response of NiNb2O6/RGO heterojunctions for the degradation of emerging pollutants in water

Utilization of environmentally friendly and effective synthesis methods to fabricate visible light responsive photocatalysts with impressive catalytic performance is desirable in photocatalytic water treatment.

WITHDRAWN: Fabrication of erbium and nitrogen modified TiO2/diatomaceous earth as a sunlight-driven floating photocatalyst for ibuprofen mitigation

This article has been withdrawn at the request of the authors. Zhaohong Zhang is listed as an author on the manuscript but has informed the journal that this occurred without their consent or knowledge of the submission, and the email address provided was fake. Zhaohong Zhang does not support the scientific conclusions of the article. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Fabrication of black TiO2−x/CuFe2O4 decorated on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports facile fabrication of black TiO_2−x/CuFe₂O₄ (Ti³⁺ self-doped titania coupled with copper ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation.

Photocatalytic degradation of ibuprofen in water using TiO2 and ZnO under artificial UV and solar irradiation

The degradation of anti-inflammatory and antipyretic drug (Ibuprofen; IBP) has been described in this study by using photocatalytic-based advanced oxidation processes. The catalysts (TiO₂ and ZnO) were activated by irradiation of artificial UV lamp and solar rays for the generation of highly oxidizing species which resulted in the degradation of IBP to intermediates and finally to carbon dioxide and water. In solar reactor, quartz and borosilicate tubes were installed for absorption of required ultraviolet rays and curved chrome plates were used to reflect and concentrate rays on the tubes containing feed mixture. The liquid chromatography, Total organic carbon (TOC), and Chemical oxygen demand (COD) tests were employed to determine the degradation rates and demineralization of solution samples. At catalyst dosing of 1-1.5 g/L, TiO₂ -based experiments showed high degradation rate under acidic conditions. Similarly, for ZnO catalyst, 1 g/L dozing rate was found to be effective under neutral conditions (pH = 7.0). UV lamp-based photocatalysis had higher degradation rate as compared to that of solar reactor. Moreover, better absorption of solar rays by quartz tubes resulted in higher degradation than that in borosilicate tubes. For UV lamp photocatalysis, the TOC and COD reduction was higher. With improved catalyst doping and better solar reactor design, solar-based IBP degradation could be more promising than UV-based catalysis. PRACTITIONER POINTS: TiO₂ and ZnO were employed to generate oxidizing agents for comparative photocatalytic degradation. Degradation rate of Ibuprofen with TiO₂ was much higher compared to ZnO. Quartz material was found more effective as radiation absorbing material than borosilicate glass for solar photo catalysis. Influence of catalyst loading (TiO₂ and ZnO) and pH conditions on degradation rate and mineralization of IBP was examined. IBP is a carcinogenic and endocrine disrupting drug so its degradation in water can protect ecological and human life.

Graphene and graphene-based nanocomposites used for antibiotics removal in water treatment: A review

Due to their extensive application in human and veterinary medicine, antibiotics have been found worldwide and studied as new pollutants in the aquatic environment. In order to remove such pollutants, adsorption and photocatalysis have attracted tremendous attention because of their great potential in antibiotics removal from aqueous solutions. Graphene, as a novel two-dimensional nanomaterial, possesses unique structure and physicochemical properties, which can be used to efficiently adsorb and photodegrade antibiotics. This review provides an overview of the adsorptive and catalytic properties of graphene, and recent advances in adsorption and photodegradation of antibiotics by graphene and its derivatives. The factors that affect the adsorption and photodegradation of antibiotics are reviewed and discussed. Furthermore, the underlying mechanisms of adsorption and photodegradation are summarized and analyzed. Meanwhile, statistical analysis is conducted based on the number of papers and the maximum adsorption and photodegradation ability on various antibiotics removal. Finally, some unsolved problems together with major challenges that exist in the fabrication and application of graphene-based nanocomposites and the development for antibiotics removal is also proposed. This work provides theoretical guidance for subsequent research in the field of adsorption and photocatalytic removal of antibiotics from aqueous solution, especially on influence factors and mechanisms aspects.