Carbon Nanotube–Manganese oxide nanorods hybrid composites for high-performance supercapacitor materials

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Hierarchical Activated Carbon-MnO2 Composite for Wide Potential Window Asymmetric Supercapacitor Devices in Organic Electrolyte

The consumption of electrical energy grows alongside the development of global industry. Generating energy storage has become the primary focus of current research, examining supercapacitors with high power density. The primary raw material used in supercapacitor electrodes is activated carbon (AC). To improve the performance of activated carbon, we used manganese dioxide (MnO₂), which has a theoretical capacitance of up to 1370 Fg^-1. The composite-based activated carbon with a different mass of 0-20% MnO₂ was successfully introduced as the positive electrode. The asymmetric cell supercapacitors based on activated carbon as the anode delivered an excellent gravimetric capacitance, energy density, and power density of 84.28 Fg^-1, 14.88 Wh.kg^-1, and 96.68 W.kg^-1, respectively, at 1 M Et₄NBF₄, maintaining 88.88% after 1000 test cycles.

Amino-functionalized NH2-MIL-125(Ti)-decorated hierarchical flowerlike Znln2S4 for boosted visible-light photocatalytic degradation

Developing novel heterojunction photocatalysts with visible-light response and remarkable photocatalytic activity have been verified to applying for the photodegradation of antibiotics in water environment. Herein, NH₂-MIL-125(Ti) was integrated with flowerlike ZnIn₂S₄ to construct NH₂-MIL-125(Ti)@ZnIn₂S₄ heterostructure using a one-pot solvothermal method. The photocatalytic performance was evaluated by the degradation of tetracycline (TC) under visible light illumination. The optimized NM(2%)@ZIS possesses a photodegradation rate (92.8%) and TOC removal efficiency (58.5%) superior to pristine components, which can be principally attributed to the positive cooperative effects of well-matched energy level positions, strong visible-light-harvesting capacity, and abundant coupling interfaces between the two. Moreover, the probable TC degradation mechanism was also clarified using the active species trapping experiments. This study inspires further design and construction of NH₂-MIL-125(Ti) and ZnIn₂S₄ based photocatalysts for effective removal of antibiotics in water environment.

Supramolecular-induced 2.40 V 130 °C working-temperature-range supercapacitor aqueous electrolyte of lithium bis(trifluoromethanesulfonyl) imide in dimethyl sulfoxide-water

Increasing the electrochemical stability window and working temperature range of supercapacitor aqueous electrolyte is the major task in order to advance aqueous electrolyte-based supercapacitors. Here, a supramolecular induced new electrolyte of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) in dimethyl sulfoxide (DMSO) and water co-solvent system is proposed. Adjusting the coordination structure among LiTFSI, DMSO, and water in the electrolyte via supramolecular interactions results in its high ionic conductivity, low viscosity, wide electrochemical stability window, and large working temperature range. The new electrolyte-based supercapacitors can work in 2.40 V working potential and 130 °C working-temperature range from -40 to 90 °C. The devices exhibit good electrochemical performances, especially the energy density over 21 Wh kg^-1, which is much higher than that with traditional aqueous electrolytes (<10 Wh kg^-1). The work paves a way to develop high-performance aqueous electrolytes for supercapacitors.

Glycosylated zein as a novel nanodelivery vehicle for lutein

Glucosamine-glycosylated zein (GLZ) generated by transglutaminase was developed as a novel delivery vehicle to prepare lutein-loaded glycosylated zein nanoparticles (GLZ-LUT). GLZ-LUT exhibited a polydispersed spherical microstructure, lutein was embedded into GLZ to form nanocomplexes via self-assembly, they had a lower zeta potential and an average particle size of less than 200 nm. Compared to lutein-loaded zein nanoparticles (Zein-LUT), the lutein entrapment efficiency of GLZ-LUT was increased from 81.55% to 89.60%. Infrared spectroscopy (FTIR) analysis results confirmed that zein was successfully modified and that lutein was encapsulated by hydrophobic zein and GLZ. Moreover, GLZ showed significantly higher solubilization of lutein than Zein-LUT and significantly improved the in vitro release of lutein in the simulated gastrointestinal tract. The in vitro antioxidant activity of lutein was also enhanced by the encapsulation of zein and glycosylated zein. These findings indicated that GLZ represent a potentially efficient and promising nanodelivery carrier for lutein compounds.

Green antimicrobial adsorbent containing grafted xanthan gum/SiO2 nanocomposites for malachite green dye

Recently, removal of synthetic dyes, especially cationic dye of malachite green (MG), and inhibition of the growth of pathogenic microorganism from drinking water have gained much interest due to their high toxic potency for aquatic biosystems. Herein, a new dye adsorbent with outstanding antibacterial activity was fabricated based on xanthan gum (XG) and SiO₂ nanoparticles through ultrasonication followed by the crosslinking polymerization with vinyl imidazole monomer. The nano adsorbents were characterized with various techniques such as FTIR, XRD, SEM, EDX, and TEM. The nanocomposites were applied as a filter for discarding MG dye and killing the growth of bacterial strains such as E.coli and S.aureus which are considered as the common impurities for drinking water. The data revealed that a maximum adsorption capacity was recorded as 99.5% (Q_max = 588.2 mg/g) at optimum conditions including 10 mg nanocomposite, 10 mL of MG dye (450 ppm), pH = 7, the temperature of 30 °C, and the adsorption time was adjusted within 6 h. The process of dye adsorption was applied to the common isotherm models of Langmuir, Temkin, and Freundlich, and the findings showed that the adsorption behavior was well fitted with the Langmuir one (R² = 0.9983). Moreover, different adsorption kinetic models such as pseudo-first order, pseudo-second order, and intra-particle diffusion were studied for understanding the mechanism of MG adsorption onto nanocomposite surface. It was found that both intraparticle diffusion and pseudo-first-order have participated evenly in the adsorption mechanism of MG dye. Ultimately, the as-prepared nanocomposites were tested against the growth of S. aureus, and E.coli manifesting a superior inhibition diameter as 23.5 ± 0.50, and 25.33 ± 0.47 mm against E.coli, and S. aureus, respectively. Therefore, our new XG-g-PVI/SiO₂ adsorbent is a very promising adsorbent for the fast and efficient capture of dyes from aqueous solutions.

N-methylene phosphonic acid chitosan/graphene sheets decorated with silver nanoparticles as green antimicrobial agents

A green and scalable approach for the preparation of few-layered graphene utilizing the biowaste of potato peels has been developed. The potato peels have been dried and carbonized to obtain a new graphite structure that has been exfoliated in N-methylene phosphonic acid chitosan (MPC). The exfoliation process assisted the formation of graphene sheets with a high size diameter and quality of 50% based on the weight of graphite structure. The graphene sheets were green decorated with silver nanoparticles using microwave power to obtain new nanocomposites. The mass ratio between the graphite and silver nitrate was optimized and observed to change the morphology and size diameter of silver nanoparticles. The as-prepared MPC structure, graphene, and silver decorated graphene nanocomposites were characterized using ¹HNMR, FTIR, XRD, UV/Vis spectrophotometer, SEM, and TEM besides tested as antimicrobial agents. The bacterial performance was also controlled by changing the number of AgNPs distributed on graphene sheets based on the mass ratios of graphite/AgNO₃. The inhibition diameter of silver decorated graphene was considerably increased to 24.8, and 20.1 mm as in the case of MPC-GRP-Ag30 composite compared to the pure graphene (11.2, 13.5 mm) for E. coli and S. aureus, consecutively proposing that the blade edge of graphene sheets can destroy the bacteria membrane and release silver cations promptly that are directed for the interaction with the cytoplasmic parts of the bacteria cell. Such findings offer green and biocompatible antibacterial agents based on the graphene derived from the biowaste products.