Catalytic hydrogenation of organic dyes by Ag nanoparticles on reduced graphene oxide

Dicarboxylate cellulose nanofibrils-supported silver nanoparticles as a novel, green, efficient and recyclable catalyst for 4-nitrophenol and dyes reduction

This study reports dicarboxylate cellulose nanofibrils (DCNF) as a novel reducing and supporting agent for producing silver nanoparticles (AgNPs) with high efficiency (63.82 % reduction) and loading (6.88 %) using UV light. Unlike previous research, AgNPs formation with DCNF doesn't involve cellulose oxidation. Instead, it appears to involve a loss of carboxyl groups from DCNF. In comparative studies, pristine CNF (PCNF) and TEMPO-oxidized CNF (TOCNF) were also examined for AgNPs production. The resulting AgNPs from DCNF exhibited a significantly smaller average size (3.9 ± 0.7 nm) compared to those from PCNF (26.9 ± 10.9 nm) and TOCNF (13.5 ± 4.5 nm). Catalytic activity evaluation by the 4-nitrophenol (4-NP) reduction reaction revealed a high rate constant of 8.47× 10-3 s-1 by AgNPs/DCNF, which surpassed AgNPs/TOCNF (1.79 × 10-3 s-1) and AgNPs/PCNF (0.63 × 10-3 s-1) by 4.7 and 13.4 times, respectively. Besides 4-NP, AgNPs/DCNF aerogels were also applied for methyl orange and Rhodamine B dyes reduction. The aerogels showed excellent reusability, maintaining over 95 % conversion even after five cycles and also effective in treating real samples and mixed dye solutions. This study opens the door for future research exploring DCNF as a support material for various metal, metal oxide, and carbon nanoparticles.

A composite of AgNPs and lignin porous microspheres via in-situ reduction of Ag+ and its catalytic performance

Despite the widespread utilization of nano silver composites in the domain of catalytic hydrogenation of aromatic pollutants in wastewater, certain challenges persist, including the excessive consumption of chemical reagents during the preparation process and the difficulty in recycling. In this study, silver ions were reduced in-situ by taking advantage of the adsorptive and reducing capacities of hydroxyls and amino groups on lignin porous microspheres (LPMs) under mild ultrasonic conditions, and lignin porous microspheres loaded with silver nanoparticles (Ag@LPMs) were conveniently prepared. Ag@LPMs had excellent catalytic and cycling performances for p-nitrophenol (4-NP), methylene blue (MB) and methyl orange (MO). The 4-NP could be completely reduced to 4-AP within 155 s under the catalysis of Ag@LPMs, with a pseudo-first-order kinetic constant of 1.28 min-1. Furthermore, Ag@LPMs could still complete the catalytic reduction of 4-NP within 10 min after five cycles. Ag@LPMs with the particle size ranging from 100 to 200 μm conferred ease of recycling, and the porous structure effectively resolved the issue of sluggish mass transfer encountered during the catalytic process. At the same time, the binding force of nano silver and LPMs obtained by ultrasonic was stronger than that of heating, so the materials prepared by ultrasonic had better cycling performance. Silver ions concentration and pH value in the preparation process affected the catalytic performance of Ag@LPMs, 50 mmol/L Ag+ and pH value of 7 turned out to be the optimization conditions.

Optimization of methyl orange decolorization by bismuth(0)-doped hydroxyapatite/reduced graphene oxide composite using RSM-CCD

In the current study, the catalyst for the decolorization of methyl orange (MO) was developed HAp-rGO by the aqueous precipitation approach. Then, bismuth(0) nanoparticles (Bi NPs), which expect to show high activity, were reduced on the surface of the support material (HAp-rGO). The obtained catalyst was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The parameters that remarkably affect the decolorization process (such as time, initial dye concentration, NaBH4 amount, and catalyst amount) have been examined by response surface methodology (RSM), an optimization method that has acquired increasing significance in recent years. In the decolorization of MO, the optimum conditions were identified as 2.91 min, Co: 18.85 mg/L, NaBH4 amount: 18.35 mM, and Bi/HAp-rGO dosage: 2.12 mg/mL with MO decolorization efficiency of 99.60%. The decolorization process of MO with Bi/HAp-rGO was examined in detail kinetically and thermodynamically. Additionally, the possible decolorization mechanism was clarified. The present work provides a new insight into the use of the optimization process for both the effective usage of Bi/HAp-rGO and the catalytic reduction of dyes.

Catalytic innovations: Improving wastewater treatment and hydrogen generation technologies

The effective reduction of hazardous organic pollutants in wastewater is a pressing global concern, necessitating the development of advanced treatment technologies. Pollutants such as nitrophenols and dyes, which pose significant risks to both human and aquatic health, making their reduction particularly crucial. Despite the existence of various methods to eliminate these pollutants, they are not without limitations. The utilization of nanomaterials as catalysts for chemical reduction exhibits a promising alternative owing to their distinguished catalytic activity and substantial surface area. For catalytically reducing the pollutants NaBH4 has been utilized as a useful source for it because it reduces the pollutants quiet efficiently and it also releases hydrogen gas as well which can be used as a source of energy. This paper provides a comprehensive review of recent research on different types of nanomaterials that function as catalysts to reduce organic pollutants and also generating hydrogen from NaBH4 methanolysis while also evaluating the positive and negative aspects of nanocatalyst. Additionally, this paper examines the features effecting the process and the mechanism of catalysis. The comparison of different catalysts is based on size of catalyst, reaction time, rate of reaction, hydrogen generation rate, activation energy, and durability. The information obtained from this paper can be used to steer the development of new catalysts for reducing organic pollutants and generation hydrogen by NaBH4 methanolysis.

Enhanced catalytic reductive hydrogenation of an organic dye by Ag decorated graphitic carbon nitride modified MCM-41

Utilization of efficient, stable and reusable catalysts for wastewater treatment and catalytic elimination of toxic pollutants is a challenge among researchers. This present work shows the synthesis of high-surface-activity Ag nanoparticle decorated gC3N4 modified MCM-41 and its efficiency towards catalytic hydrogenation of organic dye in the presence of reducing agent NaBH4. The proposed mechanism is based on the transfer of H+ and 2e- between the dye and the catalyst. Adsorption of dye stuff on the catalyst is a rate-determining step and is accelerated by the MCM-41 support which enhances the surface area. The catalytic efficiency and optimum time requirement were examined through the adsorption-desorption equilibrium, pseudo-first-order reaction kinetic model for the dye. The result obtained was 98% catalytic efficiency followed by the catalytic hydrogenation reaction.

Direct sunlight induced room temperature synthesis of anticancer and catalytic silver nanoparticles by shrimp shell waste derived chitosan

The use of marine waste derived chitosan (CS) for the synthesis of nanomaterials is considered as one of the effective routes for bio-waste management and recovering functional products. Herein, CS capped silver nanoparticles (Ag NPs-CS) with potential anticancer and dye pollutants adoption properties have been synthesized photochemically under direct sunlight. To obtain, CS, shrimp shell waste was subjected to a serious of standard demineralization, deproteinization and deacetylation processes. The electronic absorption peak (400 nm) denoting surface plasmonic resonance of Ag NPs and infrared peaks relevant to CS (3364 cm-1 of OH/NH2, 2932 cm-1 of CH, and 1647 cm-1 of -CO) exhibited peaks confirmed the formation of CS-Ag NPs. Ag NPs-CS exhibited anticancer activity against Human lung adenocarcinoma cell lines (A549), the maximum cell death noticed at the concentration of 20 μg/mL and 70 μg/mL was 20 and 52 %, respectively. An aqueous Ag NPs-CS (100 μg/mL) was degraded ≥95 % of mixed dye target solution (25 mg/mL) containing equal volume of cationic dye (Methylene blue and Rhodamine B) and anionic dye (methyl orange). Therefore, these findings suggest that the shrimp shell waste derived CS can be used for the synthesis of CS-Ag NPs with potential biomedical and environmental applications.

Biogenic preparation of copper oxide nanoparticles using table olive: Catalytic reduction, cytotoxicity, and burn wound healing activities

Green strategy for the preparation of copper oxide nanoparticles (CuO NPs) using table olive has been researched in the present work. Some characterization assays viz., transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) was used for evaluation of the crystal structure, size and morphology of the manufactured NPs. As a catalyst, the prepared material demonstrated remarkable catalytic capability (>99% in 4 min) for the reduction of rhodamine B using sodium borohydride. In addition, the treated cells with the CuO NPs were examined by regarding the cytotoxicity properties on normal (HUVEC) cell line. The results showed that the prepared CuO NPs did not have any cytotoxicity effects on HUVEC (up to 500 μg/mL). Furthermore, in vivo experiments on burn wounds in rats show that the synthesized CuO NPs ointment significantly diminished (p ≤ 0.01) the wound area. On the other hand, the wound contracture factor was increased in comparison with the control groups. Collectively, the CuO NPs prepared by biological method have potential applications in organic pollutants reduction and wound care applications. In this viewpoint, CuO NPs may be considered as an effective for treatment of different wounds including burn wounds or injuries from surgeries such as plastic surgery.

Cu-Based Catalysts Supported on H3PO4-Activated Coffee Biochar for Selective Reduction of Nitroaromatics

Selective reduction of nitroaromatics to the corresponding aromatic amines is extremely an attractive chemical process for both fundamental research and potential commercial applications. Herewith, we report that a highly dispersed Cu catalyst supported on H₃PO₄-activated coffee biochar and the resulting Cu/PBCR-600 catalyst show complete conversion of the nitroaromatics and >97.0% selectivity for the corresponding aromatic amines. The TOF of catalyzing the reduction of nitroaromatics (1.55-460.74 min^-1) is approximately 2 to 15 times higher than those of previously reported non-noble and even noble metal catalysts. Additionally, Cu/PBCR-600 also shows high stability in catalytic recycles. Furthermore, it exhibits long-term catalytic stability (660 min) for practical application in a continuous-flow reactor. The characterizations and activity tests reveal that Cu⁰ existing in Cu/PBCR-600 acts as an active site in nitroaromatics reduction. Also, the further characterization by FTIR and UV-vis demonstrates that N, P co-doped coffee biochar could selectively adsorb and activate the nitro group of nitroaromatics.

Catalytic reduction of organic pollutants, antibacterial and antifungal activities of AgNPs@CuO nanoparticles-loaded mesoporous silica

In this work, the mesoporous silica MCM-41 was prepared by a hydrothermal method and then modified using silver and copper. The obtained samples were used as antibacterial/antifungal agents and as catalysts for the reduction of the following dyes: Methylene Blue (MB), Congo Red (CR), Methyl Orange (MO), and Orange G (OG). Several parameters affecting the reduction of dyes were investigated and discussed such as the catalyst nature, the initial concentration of the dye, the dye nature, the selectivity of the catalyst in a binary system as well as the catalyst reuse. The catalysts were characterized using XRD, nitrogen sorption measurements, XRF, FTIR, XPS, SEM/EDS, and TEM. XRD, XPS, and TEM analysis clearly showed that the calcination of copper- and silver-modified silica leads to the formation of well-dispersed CuO and AgNPs having sizes between 5 and 10 nm. As determined by XRF analysis, the content of silver nanoparticles was higher compared to CuO in all samples. It has been shown that the dye reduction is influenced by the size and the content of nanoparticles as well as by their dispersions. The catalytic activity was shown to be the highest for the Ag-Cu-MCM(0.05) catalyst with a rate constant of 0.114, 0.102, 0.093, and 0.056 s^-1 for MO, MB, CR, and OG dyes in the single-dye system, respectively. In the binary system containing MB/OG or MB/MO, the catalyst Ag-Cu-MCM(0.05) was more selective toward the MB dye. The reuse of the catalyst for three consecutive cycles showed higher MB conversion in a single system with an increase in reaction time. For antifungal and antibacterial properties, the application of calcined and uncalcined materials toward six different strains showed good results, but uncalcined materials showed the best results due to the synergistic effect between CuO and unreduced species Ag⁺ which are considered responsible for the antibacterial and antifungal action.