A simple and robust approach to immobilization of antibody fragments

On the spot immunocapture in targeted biomarker analysis using paper-bound streptavidin as anchor for biotinylated antibodies

The modification of an easily available resource like paper to circumvent expensive or intensive sample pretreatment could be the answer to sample analysis in resource-poor regions. Therefore, a novel on-paper device combining sample collection with affinity sample pretreatment is introduced here. Universal smart affinity samplers are produced by a simple KIO₄-mediated oxidation of cellulose, which functionalizes the paper. This is followed by immobilization of streptavidin. Streptavidin serves as a universal anchor for biotinylated antibodies, enabling simple preparation of tailor-made affinity samplers. The functionality of the device was tested using a model protein (human chorionic gonadotropin, hCG) and biotinylated anti-hCG antibodies for affinity capture. In a laboratory setting, the performance was demonstrated, and a 14-fold increase of target binding compared to binding without bmAb was achieved. The recovery of hCG captured with bmAb-treated samplers was determined to be 33% and comparable to previously described affinity capture approaches. Application of the smart affinity samplers to human serum containing hCG showed an R² of 0.98 (200–1000 pg mL⁻¹), precision of ≤ 9.1% RSD, and estimated limit of detection of 65 pg mL⁻¹. Although further optimization and validation are necessary prior to application to real samples in clinical settings, the potential of the device for use in determination of low abundant biomarkers in complex samples has been demonstrated.

Glycosylation-on-a-Chip: A Flow-Based Microfluidic System for Cell-Free Glycoprotein Biosynthesis

In recent years, cell-free synthetic glycobiology technologies have emerged that enable production and remodeling of glycoproteins outside the confines of the cell. However, many of these systems combine multiple synthesis steps into one pot where there can be competing reactions and side products that ultimately lead to low yield of the desired product. In this work, we describe a microfluidic platform that integrates cell-free protein synthesis, glycosylation, and purification of a model glycoprotein in separate compartments where each step can be individually optimized. Microfluidics offer advantages such as reaction compartmentalization, tunable residence time, the ability to tether enzymes for reuse, and the potential for continuous manufacturing. Moreover, it affords an opportunity for spatiotemporal control of glycosylation reactions that is difficult to achieve with existing cell-based and cell-free glycosylation systems. In this work, we demonstrate a flow-based glycoprotein synthesis system that promotes enhanced cell-free protein synthesis, efficient protein glycosylation with an immobilized oligosaccharyltransferase, and enrichment of the protein product from cell-free lysate. Overall, this work represents a first-in-kind glycosylation-on-a-chip prototype that could find use as a laboratory tool for mechanistic dissection of the protein glycosylation process as well as a biomanufacturing platform for small batch, decentralized glycoprotein production.

Engineering Single Pan-Specific Ubiquibodies for Targeted Degradation of All Forms of Endogenous ERK Protein Kinase

Ubiquibodies (uAbs) are a customizable proteome editing technology that utilizes E3 ubiquitin ligases genetically fused to synthetic binding proteins to steer otherwise stable proteins of interest (POIs) to the 26S proteasome for degradation. The ability of engineered uAbs to accelerate the turnover of exogenous or endogenous POIs in a post-translational manner offers a simple yet robust tool for dissecting diverse functional properties of cellular proteins as well as for expanding the druggable proteome to include tumorigenic protein families that have yet-to-be successfully drugged by conventional inhibitors. Here, we describe the engineering of uAbs composed of human carboxyl-terminus of Hsc70-interacting protein (CHIP), a highly modular human E3 ubiquitin ligase, tethered to differently designed ankyrin repeat proteins (DARPins) that bind to nonphosphorylated (inactive) and/or doubly phosphorylated (active) forms of extracellular signal-regulated kinase 1 and 2 (ERK1/2). Two of the resulting uAbs were found to be global ERK degraders, pan-specifically capturing all endogenous ERK1/2 protein forms and redirecting them to the proteasome for degradation in different cell lines, including MCF7 breast cancer cells. Taken together, these results demonstrate how the substrate specificity of an E3 ubiquitin ligase can be reprogrammed to generate designer uAbs against difficult-to-drug targets, enabling a modular platform for remodeling the mammalian proteome.

Screen printed electrode-based biosensor functionalized with magnetic cobalt/single-chain antibody fragments for cocaine biosensing in different matrices

On-site detection of substance abuse is an important approach in the preventive and intervention protocols implementations. It is known that the traditional methods are heavy, time-consuming, and need a high level of logistical requirements. As such, biosensors represent great potential to simplify and improve substance abuse detection. In this study, we have designed a functionalized screen-printed electrode (SPE) electrochemical biosensor with cobalt oxide nanoparticles and single-chain antibody fragments (scFvs) for cocaine detection. Different electrochemical techniques such as differential pulse voltammetry, cyclic voltammetry, and electrochemical impedance spectrometry were used to examine the functionality of the designed biosensor. Furthermore, SEM observations were performed to observe the surface changes after functionalization. The results showed that the linearity ranged between 5.0 and 250 ng/mL and a detection limit of 3.6 ng/mL (n = 6). These results were compared to results obtained from Q-TOF/MS where four different matrices (serum, sweat, urine, and saliva) were spiked with 100 ng/mL cocaine and were analyzed by both methods (Biosensor and Q-TOF/MS). Results showed a higher performance of the biosensor compared to traditional methods. In addition, the selectivity of the biosensor was shown in the presence of different interferents where the designed platform showed a specific response to only cocaine. In conclusion, the designed biosensor proposes great potential for portable and on-site substance abuse detection in addition to boasting the capability of reuse of the SPE and thus, reducing the costs related to such applications.

Effect of linkers on immobilization of scFvs with biotin-streptavidin interaction

Single-chain variable fragment antibodies (scFvs) are attractive for use in applications that require high specificity and binding to a target, such as biosensors. Previously, we demonstrated that a variety of scFvs can be immobilized onto a streptavidin surface through in vivo biotinylation of the biotin carboxyl carrier protein (BCCP) or smaller AviTag fused to the scFvs. However, the BCCP constructs showed better immobilization than the AviTag constructs. In this work, we investigated whether the discrepancy between the biotinylation tags could be alleviated by incorporating a flexible (G₄ S)_n linker of varying lengths or a rigid (EA₃ K)₃ linker between the biotinylation tags and the scFvs scFv13R4 and scFv5. Fusion of the (G₄ S)₅ linker or the (G₄ S)₃ linker to the AviTag construct of scFv13R4 or scFv5, respectively, and fusion of the (EA₃ K)₃ linkers to the AviTag constructs of both scFvs enhanced immobilization. Meanwhile, the robust immobilization of the BCCP construct of the scFv constructs remained unaffected. The positive to neutral effects of the linkers, with no adverse effects, make them beneficial tools to incorporate into fusion proteins that show poor immobilization without a linker.

Biotin-tagged proteins: Reagents for efficient ELISA-based serodiagnosis and phage display-based affinity selection

The high-affinity interaction between biotin and streptavidin has opened avenues for using recombinant proteins with site-specific biotinylation to achieve efficient and directional immobilization. The site-specific biotinylation of proteins carrying a 15 amino acid long Biotin Acceptor Peptide tag (BAP; also known as AviTag) is effected on a specific lysine either by co-expressing the E. coli BirA enzyme in vivo or by using purified recombinant E. coli BirA enzyme in the presence of ATP and biotin in vitro. In this paper, we have designed a T7 promoter-lac operator-based expression vector for rapid and efficient cloning, and high-level cytosolic expression of proteins carrying a C-terminal BAP tag in E. coli with TEV protease cleavable N-terminal deca-histidine tag, useful for initial purification. Furthermore, a robust three-step purification pipeline integrated with well-optimized protocols for TEV protease-based H10 tag removal, and recombinant BirA enzyme-based site-specific in vitro biotinylation is described to obtain highly pure biotinylated proteins. Most importantly, the paper demonstrates superior sensitivities in indirect ELISA with directional and efficient immobilization of biotin-tagged proteins on streptavidin-coated surfaces in comparison to passive immobilization. The use of biotin-tagged proteins through specific immobilization also allows more efficient selection of binders from a phage-displayed naïve antibody library. In addition, for both these applications, specific immobilization requires much less amount of protein as compared to passive immobilization and can be easily multiplexed. The simplified strategy described here for the production of highly pure biotin-tagged proteins will find use in numerous applications, including those, which may require immobilization of multiple proteins simultaneously on a solid surface.