A simple method for rapid microbial identification from positive monomicrobial blood culture bottles through matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Blood culture quality and turnaround time of clinical microbiology laboratories in Chinese Teaching Hospitals: A multicenter study

PURPOSE

Blood culture (BC) remains the gold standard for the diagnosis of bloodstream infections. Improving the quality of clinical BC samples, optimizing BC performance, and accelerating antimicrobial susceptibility test (AST) results are essential for the early detection of bloodstream infections and specific treatments.

METHODS

We conducted a retrospective multicenter study using 450,845 BC specimens from clinical laboratories obtained from 19 teaching hospitals between 1 January 2021 and 31 December 2021. We evaluated key performance indicators (KPIs), turnaround times (TATs), and frequency distributions of processing in BC specimens. We also evaluated the AST results of clinically significant isolates for four different laboratory workflow styles.

RESULTS

Across the 10 common bacterial isolates (n = 16,865) and yeast isolates (n = 1011), the overall median (interquartile range) TATs of AST results were 2.67 (2.05-3.31) and 3.73 (2.98-4.64) days, respectively. The specimen collections mainly occurred between 06:00 and 24:00, and specimen reception and loadings mainly between 08:00 and 24:00. Based on the laboratory workflows of the BCs, 16 of the 19 hospitals were divided into four groups. Time to results (TTRs) from specimen collection to the AST reports were 2.35 (1.95-3.06), 2.61 (1.98-3.32), 2.99 (2.60-3.87), and 3.25 (2.80-3.98) days for groups I, II, III, and IV, respectively.

CONCLUSION

This study shows the related BC KPIs and workflows in different Chinese hospitals, suggesting that laboratory workflow optimization can play important roles in shortening time to AST reports and initiation of appropriate timely treatment.

Diagnostic efficiency of the FilmArray blood culture identification (BCID) panel: a systematic review and meta-analysis

Introduction. The FilmArray blood culture identification panel (BCID) panel is a multiplex PCR assay with high sensitivity and specificity to identify the most common pathogens in bloodstream infections (BSIs).Hypothesis. We hypothesize that the BCID panel has good diagnostic performance for BSIs and can be popularized in clinical application.Aim: To provide summarized evidence for the diagnostic accuracy of the BCID panel for the identification of positive blood cultures.Methodology. We searched the MEDLINE, EMBASE and Cochrane databases through March 2021 and assessed the efficacy of the diagnostic test of the BCID panel. We performed a meta-analysis and calculated the summary sensitivity and specificity of the BCID panel. Systematic review protocols were registered in the International Prospective Register of Systematic Reviews (PROSPERO) (registration number CRD42021239176).Results. A total of 16 full-text articles were eligible for analysis. The overall sensitivities of the BCID panel on Gram-positive bacteria, Gram-negative bacteria and fungi were 97 % (95 % CI, 0.96-0.98), 100 % (95 % CI, 0.98-01.00) and 99 % (95 % CI, 0.87-1.00), respectively. The pooled diagnostic specificities were 99 % (95 % CI, 0.97-1.00), 100 % (95 % CI, 1.00-1.00) and 100 % (95 % CI, 1.00-1.00) for Gram-positive bacteria, Gram-negative bacteria and fungi, respectively.Conclusions. The BCID panel has high rule-in value for the early detection of BSI patients. The BCID panel can still provide valuable information for ruling out bacteremia or fungemia in populations with low pretest probability.

Fast Track Diagnostic Tools for Clinical Management of Sepsis: Paradigm Shift from Conventional to Advanced Methods

Sepsis is one of the deadliest disorders in the new century due to specific limitations in early and differential diagnosis. Moreover, antimicrobial resistance (AMR) is becoming the dominant threat to human health globally. The only way to encounter the spread and emergence of AMR is through the active detection and identification of the pathogen along with the quantification of resistance. For better management of such disease, there is an essential requirement to approach many suitable diagnostic techniques for the proper administration of antibiotics and elimination of these infectious diseases. The current method employed for the diagnosis of sepsis relies on the conventional culture of blood suspected infection. However, this method is more time consuming and generates results that are false negative in the case of antibiotic pretreated samples as well as slow-growing microbes. In comparison to the conventional method, modern methods are capable of analyzing blood samples, obtaining accurate results from the suspicious patient of sepsis, and giving all the necessary information to identify the pathogens as well as AMR in a short period. The present review is intended to highlight the culture shift from conventional to modern and advanced technologies including their limitations for the proper and prompt diagnosing of bloodstream infections and AMR detection.

Orthopedic Device-Related Infections Due to Emerging Pathogens Diagnosed by a Combination of Microbiological Approaches: Case Series and Literature Review

Orthopedic and trauma device-related infections (ODRI) due to high virulence microorganisms are a devastating complication after orthopedic surgery. Coagulase-negative Staphylococci (CoNS) are mainly involved but commensal bacteria, located in human mucous membranes, are emerging pathogens in ODRI. Currently, bacterial culture is the gold standard for ODRI but the diagnostic process remains time consuming and laborious. We evaluated a combination of microbiological approaches in the diagnosis of emerging pathogens involved in ODRI. We analyzed two synovial fluids, five tissue samples and five surgical wound swabs from two different patients with ODRI, attending the Department of Orthopedic and Trauma Surgery of Mater Domini Teaching Hospital, Catanzaro, Italy. Identification was carried out with a combination of microbiological approaches (culture, mass spectrometry and 16s rRNA gene sequencing). We demonstrated the importance of a combination of microbiological approaches for the diagnosis of emerging pathogens in ODRI, because the low number of cases in the literature makes it very difficult to formulate guidelines for the management of patients.

Rapid and Simple Approaches for Diagnosis of Staphylococcus aureus in Bloodstream Infections

Staphylococcus aureus is an important causative pathogen of bloodstream infections. An amplification assay such as real-time PCR is a sensitive, specific technique to detect S. aureus. However, it needs well-trained personnel, and costs are high. A literature review focusing on rapid and simple methods for diagnosing S. aureus was performed. The following methods were included: (a) Hybrisep in situ hybridization test, (b) T2Dx system, (c) BinaxNow Staphylococcus aureus and PBP2a, (d) Gram staining, (e) PNA FISH and QuickFISH, (f) Accelerate Pheno^TM system, (g) MALDI-TOF MS, (h) BioFire FilmArray, (i) Xpert MRSA/SA. These rapid and simple methods can rapidly identify S. aureus in positive blood cultures or direct blood samples. Furthermore, BioFire FilmArray and Xpert MRSA/SA identify methicillin-resistant S. aureus (MRSA), and the Accelerate Pheno^TM system can also provide antimicrobial susceptibility testing (AST) results. The rapidity and simplicity of results generated by these methods have the potential to improve patient outcomes and aid in the prevention of the emergence and transmission of MRSA.

Timing and Spectrum of Antibiotic Treatment for Suspected Sepsis and Septic Shock: Why so Controversial?

Sepsis guidelines and mandates encourage increasingly aggressive time-to-antibiotic targets for broad-spectrum antimicrobials for suspected sepsis and septic shock. This has caused considerable controversy due to weaknesses in the underlying evidence and fear that overly strict antibiotic deadlines may harm patients by perpetuating or escalating overtreatment. Indeed, a third or more of patients currently treated for sepsis and septic shock have noninfectious or nonbacterial conditions. These patients risk all the potential harms of antibiotics without their possible benefits. Updated Surviving Sepsis Campaign guidelines now emphasize the importance of tailoring antibiotics to each patient's likelihood of infection, risk for drug-resistant pathogens, and severity-of-illness.

Mortality Risk Factors of Early Neonatal Sepsis During COVID-19 Pandemic

Purpose

This study aimed to determine predisposing factors for negative outcome in infants with early neonatal sepsis during COVID-19.

Patients and Methods

A prospective cohort study of 172 newborns up to 4 days diagnosed with neonatal sepsis was carried out in Karaganda (Kazakhstan). The microbiological examination was used to identify a causative agent of bloodstream infection. ELISA was performed to determine the total anti-SARS-CoV-2 antibodies. Gestational age, mode of delivery, birth weight, C-reactive protein and procalcitonin levels, comorbidities, type of pathogen, duration of hospitalization and mother’s infection diseases were used for statistical analysis.

Results

Mortality in infants with neonatal sepsis was 22% (38/172). Anti-SARS-CoV-2 antibodies were detected in 68.3% of the newborns. Culture-negative ELBW infants have a 5.3-fold higher risk of death (p<0.001). Low gestational age and a shorter period of hospitalization were statistically associated with fatality. CRP is generally higher in deceased children (p=0.002). Necrotizing enterocolitis (p<0.001), pneumonia (p=0.009) and anemia (p=0.016) were significantly associated with negative outcome. And, 31.4% of the infants with sepsis had positive blood cultures. The leading cause of sepsis in newborns was CoNS – 57%.

Conclusion

During COVID-19 pandemic neonatal sepsis mortality was associated with low birth weight, gestational age, and comorbidities as in non-pandemic time. The relationship between COVID-19 in the mother and neonatal mortality was not found. However, anti-SARS-CoV-2 antibodies were detected in more than half of newborns.

Rapid diagnosis of bacteria and determination of sensitivity in blood culture

Aim: In patients with bloodstream infection; identifying the causative agent in a short time and applying appropriate antimicrobial therapy is very important in terms of reducing morbidity and mortality. In this study, it was aimed to evaluate a new method developed for direct identification and antibiotic susceptibility testing from blood culture. Materials and Methods: Bacterial pellet was obtained from blood culture samples that showed positive signals in the BacT/Alert 3D system by washing and centrifugation. Identification was made from this pellet using Vitek MS, followed by direct antibiotic susceptibility testing in the VITEK 2 automated system. The results were compared with the standard method. Results: Identification was performed on 80 blood culture samples. In the direct identification process, 73 samples were identified, of which 72 (90%) resulted in agreement with the standard method. Direct antibiotic susceptibility tests were found to be compatible with a rate of 97.9%. Among the evaluated 635 antibiotic susceptibility results; it was observed that 10 of them had major errors and 3 of them had minor errors. Conclusions: Using the procedures applied in the study from blood culture samples, without the need for costly reagents or long processing time, it has been observed that identification and antibiotic susceptibility results can be obtained within 24 hours, similar to standard results.

Liquid extraction surface analysis-mass spectrometry: An advanced and environment-friendly analytical tool in modern analysis

The Liquid Extraction Surface Analysis technique is a new high-throughput instrument for ambient mass spectrometry. The benefits of the Liquid Extraction Surface Analysis-Mass Spectrometry approach are the high throughput screening of samples and the absence of sample preparation. Liquid Extraction Surface Analysis-Mass Spectrometry also consumes less solvent for extraction, making it more environmentally friendly and there is no substrate restriction. It utilizes advanced instrumentation like the use of robotic pipettes, nanoelectrospray systems, electronspray ionization chips which makes it highly efficient. In recent years, Liquid Extraction Surface Analysis-Mass Spectrometry has seen widespread use in a variety of analytical fields including drug metabolite analysis, mapping drug distribution in tissues, protein and lipid characterization etc. In this review, we have summarized the basic working principles of the Liquid Extraction Surface Analysis-Mass Spectrometry approach in detail along with a detailed description of the recently reported applications in the analysis of proteins, lipids, drugs and foods. The investigated analytes along with detection methodologies and significant outcomes of various research reports have been presented with the help of tables. This tool has also been utilized in clinical investigations of biological fluids, fingerprint analysis and authentication of agarwood. This article is protected by copyright. All rights reserved.

Impact of Direct From Blood Culture Identification of Pathogens Paired With Antimicrobial Stewardship Interventions in a Pediatric Hospital

OBJECTIVE

Identification of organisms directly from positive blood culture by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has the potential for improved clinical outcomes through earlier organism identification and shorter time to appropriate clinical intervention. The uses of this technology in pediatric patients and its impact in this patient population have not been well described.

METHODS

Direct from positive blood culture organism identification via MALDI-TOF was implemented in September 2019. A quality improvement project was performed to assess its impact on admissions for contaminant blood cultures and time to effective and optimal antimicrobials and clinical decision-making. A pre- and post-implementation retrospective review for consecutive September through February time periods, was conducted on patients with positive monomicrobial blood cultures. Statistics were evaluated using Mann-Whitney U and χ² tests.

RESULTS

One hundred nineteen patients with 131 unique blood cultures (65 in pre- and 66 in post-implementation) were identified. Time to identification was shorter, median 35.4 hours (IQR, 22.7-54.3) versus 42.3 hours (IQR, 36.5-49) in post- and pre-groups, respectively (p = 0.02). Patients were less likely to be admitted for a contaminated blood culture in the post-implementation, 26% versus 11% in the pre-implementation (p = 0.03) group. In patients treated for bacteremia, there was a shorter time to optimal therapy from Gram stain reporting in the post-implementation (median 42.7 hours [IQR, 27.2-72]) versus pre-implementation (median 60.8 hours [IQR, 42.9-80.6]) (p = 0.03).

CONCLUSIONS

Direct from positive blood culture identification by MALDI-TOF decreased time to effective and optimal antimicrobials and decreased unnecessary admission in pediatric patients for contaminated blood cultures.

Future potential of metagenomics in clinical laboratories

INTRODUCTION

Rapid and sensitive diagnostic strategies are necessary for patient care and public health. Most of the current conventional microbiological assays detect only a restricted panel of pathogens at a time or require a microbe to be successfully cultured from a sample. Clinical metagenomics next-generation sequencing (mNGS) has the potential to unbiasedly detect all pathogens in a sample, increasing the sensitivity for detection and enabling the discovery of unknown infectious agents.

AREAS COVERED

High expectations have been built around mNGS; however, this technique is far from widely available. This review highlights the advances and currently available options in terms of costs, turnaround time, sensitivity, specificity, validation, and reproducibility of mNGS as a diagnostic tool in clinical microbiology laboratories.

EXPERT OPINION

The need for a novel diagnostic tool to increase the sensitivity of microbial diagnostics is clear. mNGS has the potential to revolutionise clinical microbiology. However, its role as a diagnostic tool has yet to be widely established, which is crucial for successfully implementing the technique. A clear definition of diagnostic algorithms that include mNGS is vital to show clinical utility. Similarly to real-time PCR, mNGS will one day become a vital tool in any testing algorithm.

Liquid Extraction Surface Analysis Mass Spectrometry of ESKAPE Pathogens

The ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter cloacae) represent clinically important bacterial species that are responsible for most hospital-acquired drug-resistant infections; hence, the need for rapid identification is of high importance. Previous work has demonstrated the suitability of liquid extraction surface analysis mass spectrometry (LESA MS) for the direct analysis of colonies of two of the ESKAPE pathogens (Staphylococcus aureus and Pseudomonas aeruginosa) growing on agar. Here, we apply LESA MS to the remaining four ESKAPE species (E. faecium E745, K. pneumoniae KP257, A. baumannii AYE, and E. cloacae S11) as well as E. faecalis V583 (a close relative of E. faecium) and a clinical isolate of A. baumannii AC02 using an optimized solvent sampling system. In each case, top-down LESA MS/MS was employed for protein identification. In total, 24 proteins were identified from 37 MS/MS spectra by searching against protein databases for the individual species. The MS/MS spectra for the identified proteins were subsequently searched against multiple databases from multiple species in an automated data analysis workflow with a view to determining the accuracy of identification of unknowns. Out of 24 proteins, 19 were correctly assigned at the protein and species level, corresponding to an identification success rate of 79%.

Evaluation of a Rapid and Simplified Protocol for Direct Identification of Microorganisms From Positive Blood Cultures by Using Matrix Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS)

Early and rapid identification of microorganisms is critical for reducing the mortality rate caused by bloodstream infections (BSIs). The accuracy and feasibility of directly identifying pathogens in positive blood cultures by matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been intensely confirmed. In this study, we combined density centrifugation and extra chemical lysis-extraction to develop an optimized method in the blood culture process, which significantly improved the effectiveness of direct identification by MALDI-TOF MS. The accuracy was evaluated by 2,032 positive blood culture samples (115 species of microorganism). The overall MALDI-TOF MS based identification rate with scores ≥ 1.700 was 87.60%. 94.06% of gram-negative bacteria were identified consistently to the genus level, followed by anaerobes (93.33%), gram-positive bacteria (84.46%), and fungi (60.87%). This protocol could obtain results within 10–20 min at a cost of less than $0.1 per sample, which saved up to 24 h in identifying 87.60% of the microorganism from positive blood cultures. This rapid and simplified protocol facilitates the direct identification of microorganism in positive blood cultures, and exhibits the advantages of cost-effective, time-saving, and easy-to-use. It could provide the causative organism of the patient to clinicians in time for targeted treatment and reduce mortality.

In-house protocol and performance of MALDI-TOF MS in the early diagnosis of bloodstream infections in a fourth-level hospital in Colombia: Jumping to full use of this technology

BACKGROUND

Bloodstream infections (BSIs) are a major cause of mortality in hospitalized patients. Rapid diagnosis is crucial because any delay in the antimicrobial treatment is associated with an increase in adverse patient outcomes. The application of matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) technology directly to blood cultures permits earlier identification of BSIs and facilitates treatment management.

METHODS

A total of 470 positive blood cultures from patient samples were analyzed using Standard Aerobic/F and Anaerobic/F blood culture media. Isolates were identified using conventional identification methods and by the direct method using the MALDI-TOF MS system.

RESULTS

In 470 blood cultures, the direct method showed good identification results (420/470, 89%); specifically, accurate species and genus identification in 283/470 (60%), and only correct genus identification in 137/470 (29%). The direct protocol had better performance for Gram-negative compared to Gram-positive bacteria (97% vs 76%) and was unable to identify the positive blood cultures for both yeasts and some bacteria, mostly Gram-positive (50/470).

CONCLUSIONS

The protocol used here gave good and reliable results, being available up to 24 h earlier, while also leading to better use of MALDI-TOF.

Rapid method for direct identification of positive blood cultures by MALDI-TOF MS

Application of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) using positive blood cultures (BCs) is a revolution in identification of microorganisms in clinical microbiology laboratories. Although there are several commercial pretreatment protocols they are expensive. Here, we evaluated the performance of a locally produced Bioyong pre-treatment kit for the direct identification of microorganisms in positive BCs by MALDI-TOF MS method. The mocked positive BCs were performed using 200 Thermo aerobic blood culture bottles and 200 aerobic Scenker blood culture bottles. A total of 200 organisms were invovled, including 91 strains of Gram-positive bacteria, 97 strains of Gram-negative bacteria and 12 strains of Candida. The positive BCs were subcultured and identified by classical biochemical Vitek II testing as the gold standard of identification. The Bioyong pre-treatment kit could successfully identify microorganisms in 189 (94.5%) Thermo positive BCs and 189 (94.5%) Scenker positive blood cultures, respectively. In total, 94 (96.9%) Gram-negative bacteria, 86 (94.5%) Gram-positive bacteria and 9 (75.0%) candida isolated from Thermo positive BCs were correctly identified to species level and 95 (97.9%) Gram-negative bacteria, 86 (94.5%) Gram-positive bacteria and 8 (66.7%) candida isolated from Scenker positive BCs were correctly identified to species level. This method provides a rapid, accurate identification of bacteria and Candida within one hour in positive blood cultures. Routine application of this technique will improve the antimicrobial treatment within 24 h among the patients with bacteremia and candidemia.

Rapid diagnosis of periprosthetic joint infection from synovial fluid in blood culture bottles by direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Background

The aim of this prospective study was to use direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) to rapidly diagnose periprosthetic joint infections (PJIs).

Method

Synovial fluid was taken from 77 patients (80 joints, 41 hips and 39 knees) who met the International Consensus Meeting criteria for PJI, and inoculated into blood culture bottles (BCBs) and onto conventional swabs. Positive blood cultures were analyzed using either direct or routine MALDI-TOF MS. Pathogen identification and the time to identification was recorded. Differences between groups were analyzed using the Kruskal-Wallis test and Bonferroni's post-hoc test.

Results

Direct and routine MALDI-TOF MS both detected 64 positive results (80%), compared to 47 (59%) by conventional swabs (p = 0.002). Direct MALDI-TOF MS identified 85.3% of the gram-positive organisms and 92.3% of the gram-negative organisms. No fungi were identified by direct MALDI-TOF MS. In 17 BCBs that were flagged positive, identification by direct MALDI-TOF MS failed. Among the positive results in the direct MALDI-TOF MS group, Staphylococcus aureus accounted for 47%, followed by Staphylococcus epidermidis (17%), Escherichia coli (9%) and Klebsiella pneumoniae (9%). The median time to microorganism identification was significantly shorter with direct MALDI-TOF MS (12.7 h, IQR: 8.9–19.6 h) than with routine MALDI-TOF MS (39.5 h, IQR: 22.8–46.0 h) or swabs (44.4 h, IQR: 27.2–72.6 h) (p < 0.0001). In pairwise comparisons, there were significant differences in the time of microorganism identification between direct MALDI-TOF MS and routine MALDI-TOF MS (p < 0.0001) or swab culture (p < 0.0001). There was no significant difference between routine MALDI-TOF MS and swab culture (p = 0.0268).

Conclusion

Compared with current laboratory practice, direct MALDI-TOF MS shortened the time to microorganism identification and had superior results compared to conventional swabs, except for fungi. Further studies should investigate whether the earlier administration of appropriate antimicrobial agents can improve the treatment outcomes of PJIs.

Direct identification of bacterial and human proteins from infected wounds in living 3D skin models

Trauma is one of the leading causes of death in people under the age of 49 and complications due to wound infection are the primary cause of death in the first few days after injury. The ESKAPE pathogens are a group of bacteria that are a leading cause of hospital-acquired infections and a major concern in terms of antibiotic resistance. Here, we demonstrate a novel and highly accurate approach for the rapid identification of ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp.) directly from infected wounds in 3D in vitro skin models. Wounded skin models were inoculated with bacteria and left to incubate. Bacterial proteins were identified within minutes, directly from the wound, by liquid extraction surface analysis mass spectrometry. This approach was able to distinguish closely related strains and, unlike genomic approaches, can be modified to provide dynamic information about pathogen behaviour at the wound site. In addition, since human skin proteins were also identified, this method offers the opportunity to analyse both host and pathogen biomarkers during wound infection in near real-time.

Rapid identification of bloodstream bacterial and fungal pathogens and their antibiotic resistance determinants from positively flagged blood cultures using the BioFire FilmArray blood culture identification panel

BACKGROUND/PURPOSE

Rapid and accurate identification of pathogens and their antibiotic resistance directly from flagged blood cultures can aid clinicians in optimizing early antibiotic treatment and improve the clinical outcomes, especially in settings associated with high rates of bloodstream infection caused by vancomycin-resistant Enterococci (VRE) and carbapenem-resistant Enterobacteriaceae (CRE). We compared the results of the BioFire FilmArray Blood Culture Identification (BCID) panel with those of conventional methods for identifying the pathogens and their antibiotic susceptibility status.

METHODS

In total, 100 randomly selected positive blood cultures (BACTEC Plus Aerobic/F bottles or BACTEC Anaerobic Lytic/10 bottles) were analyzed. The pathogen detection efficiency of FilmArray BCID panel was compared with that of conventional method using MALDI-TOF MS system (Bruker MALDI Biotyper) and susceptibility testing by the Vitek 2 system. The sequencing analysis of antibiotic resistance genes was performed for discrepant results obtained from MALDI Biotyper and Vitek 2.

RESULTS

Among the 100 positively flagged blood cultures, 94% of FilmArray BCID panel results were consistent with the MALDI Biotyper results. All five VRE isolates positive for vanA/vanB genes, 10 of 12 Staphylococcus species positive for mecA gene, and only one Klebsiella pneumoniae isolate positive for K. pneumoniae carbapenemase gene (bla_KPC) detected in the FilmArray BCID panel were also concordant with results by the results by conventional susceptibility testing/molecular confirmation.

CONCLUSIONS

The FilmArray BCID panel results not only demonstrated good correlation with conventional blood culture identification and susceptibility results but also provided results rapidly, especially for the early detection of MRSA, VRE and bla_KPC-mediated CRE.

Integrating Bacterial Identification and Susceptibility Testing: A Simple and Rapid Approach to Reduce the Turnaround Time in the Management of Blood Cultures

We evaluated a rapid bacterial identification (rID) and a rapid antimicrobial susceptibility testing by disk diffusion (rAST) from positive blood culture to overcome the limitations of the conventional methods and reduce the turnaround time in bloodstream infection diagnostics. The study included hemocultures flagged as positive by bacT/ALERT®, identification by MALDI-TOF MS, and rAST. The results were compared to identification and antimicrobial susceptibility testing (AST) results by current standard methods, after 24 h incubation. For rAST categorical agreement (CA), very major errors (VME), major errors (ME), and minor errors (mE) were calculated. A total of 524 bacterial samples isolated from blood cultures were obtained, including 246 Gram-negative (GN) and 278 Gram-positive (GP) aerobes. The overall concordance of rID was 88.6%, and it was highest among GN (96%). A total of 2196 and 1476 antimicrobial agent comparisons were obtained for GN and GP, respectively. Evaluation of rAST, CA, VME, ME, and mE disclosed 97.7, 0.7, 0.5, and 1.1% for GN and 98.0, 0.5, 0.7, and 0.8% for GP, respectively. Meropenem CA, VME, and ME were 98.3, 0.5, and 0.5%, respectively; mE was not observed. Oxacillin CA, ME, and mE were 97.4, 1.6, and 0.6%, respectively; VME was not observed. Overall, kappa scores of the results of the comparisons demonstrated the high agreement between rAST and the standard method. Identification and AST of aerobic bacteria from positive blood cultures after a short period of incubation on solid blood agar is a fast and reliable method that may improve the management of bloodstream infections.

Detection of Methicillin Resistance in Staphylococcus aureus From Agar Cultures and Directly From Positive Blood Cultures Using MALDI-TOF Mass Spectrometry-Based Direct-on-Target Microdroplet Growth Assay

Matrix-assisted laser desorption/ionization time-of-flight-mass spectrometry (MALDI-TOF MS)-based direct-on-target microdroplet growth assay (DOT-MGA) was recently described as a novel method of phenotypic antimicrobial susceptibility testing (AST). Here, we developed the application of MALDI-TOF MS-based DOT-MGA for Gram-positive bacteria including AST from agar cultures and directly from positive blood cultures (BCs) using the detection of methicillin resistance as example. Consecutively collected, a total of 14 methicillin-resistant Staphylococcus aureus (MRSA) and 14 methicillin-susceptible S. aureus (MSSA) clinical isolates were included. Furthermore, a collection of MRSA challenge strains comprising different SCCmec types, mec genes, and spa types was tested. Blood samples were spiked with MRSA and MSSA and positive BC broth processed by three different methods: serial dilution of BC broth, lysis/centrifugation, and differential centrifugation. Processed BC broth was directly used for rapid AST using DOT-MGA. Droplets of 6 μl with and without cefoxitin at the EUCAST breakpoint concentration were spotted in triplicates onto the surface of a MALDI target. Targets were incubated in a humidity chamber, followed by medium removal and on-target protein extraction with formic acid before adding matrix with an internal standard as a quality control (QC). Spectra were acquired and evaluated using MALDI Biotyper software. First, tests were considered as valid, if the growth control achieved an identification score of ≥1.7. For valid tests, same score criterion was used for resistant isolates when incubated with cefoxitin. An identification score <1.7 after incubation with cefoxitin defined susceptible isolates. On-target protein extraction using formic acid considerably improved detection of methicillin resistance in S. aureus and DOT-MGA showed feasible results for AST from agar cultures after 4 h incubation time. Comparing the different processing methods of positive BC broth, lysis/centrifugation method with a final dilution step 10^–1 of the 0.5 McFarland suspension resulted in best test performance after 4 h incubation time. Overall, 96.4% test validity, 100% sensitivity, and 100% specificity were achieved for detection of methicillin resistance in clinical isolates. All strains of the MRSA challenge collection were successfully tested as methicillin-resistant. This first study on Gram-positive organisms showed feasibility and accuracy of MALDI-TOF MS-based DOT-MGA for rapid AST of S. aureus from agar cultures and directly from positive BCs.

Rapid direct identification of positive paediatric blood cultures by MALDI-TOF MS technology and its clinical impact in the paediatric hospital setting

OBJECTIVE

Rapid diagnostic tools are imperative for timely clinical decision making, particularly in bacteraemic patients. This study evaluated the performance of a fast, inexpensive novel in house method for processing positive blood cultures for immediate identification of microorganisms by matrix-assisted laser desorption ionization-time of flight mass spectrometry (Vitek MS bioMérieux). We prospectively analyzed the clinical impact of such method on the management of pediatric patients.

RESULT

In total, 360 positive blood cultures were included. Among 318 mono-microbial cultures, in-house method achieved correct identification in 270 (85%) cultures to the species level, whilst 43 (13.5%) gave no identification, and 7 (2.2%) gave discordant identifications. Identification of Gram-negative organisms was accurate to both species and genus level in 99% of isolates, and for Gram positives accuracy was 84% to genus and 81% to species level overall, with accuracy of 100% for Staphylococcus aureus and Enterococcus to the species level. Assessment of the potential impact of direct identification in sixty sequential cases revealed a clear clinical benefit in 35.5% of cases. Benefits included timely antibiotic rationalization, change of medical intervention, and early confirmation of contamination. This study demonstrates a highly accurate in-house method with considerable potential clinical benefits for paediatric care.

Untargeted accurate identification of highly pathogenic bacteria directly from blood culture flasks

To improve the preparedness against exposure to highly pathogenic bacteria and to anticipate the wide variety of bacteria that can cause bloodstream infections (BSIs), a safe, unbiased and highly accurate identification method was developed. Our liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based method can identify highly pathogenic bacteria, their near-neighbors and bacteria that are common causes of BSIs directly from positive blood culture flasks. The developed Peptide-Based Microbe Detection Engine (http://proteome2pathogen.com) relies on a two-step workflow: a genus-level search followed by a species-level search. This strategy enables the rapid identification of microorganisms based on the analyzed proteome. This method was successfully used to identify strains of Bacillus anthracis, Brucella abortus, Brucella melitensis, Brucella suis, Burkholderia pseudomallei, Burkholderia mallei, Francisella tularensis, Yersinia pestis and closely related species from simulated blood culture flasks. This newly developed LC-MS/MS method is a safe and rapid method for accurately identifying bacteria directly from positive blood culture flasks.

Evaluation of VITEK MS, Clin-ToF-II MS, Autof MS 1000 and VITEK 2 ANC card for identification of Bacteroides fragilis group isolates and antimicrobial susceptibilities of these isolates in a Chinese university hospital

BACKGROUND AND PURPOSE

Bacteroides fragilis group isolates are most frequently isolated anaerobic pathogens. This study aimed to evaluate the accuracy of VITEK MS, Clin-ToF-II MS, Autof MS 1000 and VITEK 2 ANC card on the identification of clinical B. fragilis group isolates, as well as to determine their antimicrobial susceptibilities.

METHODS

A total of 138 isolates of B. fragilis group isolates were identified with the three MALDI-TOF MS systems and VITEK 2 ANC cards. 16S rRNA gene sequencing was used as the reference identification method for comparison. Antimicrobial susceptibilities were determined by agar dilution method to 19 antimicrobial agents recommended by Clinical and Laboratory Standards Institute (CLSI).

RESULTS

Hundred thirty three isolates of Bacteroides spp. and 5 isolates of Parabacteroides spp. were identified by 16S rRNA sequencing. The rates of accurate identification at species level of VITEK MS, Clin-ToF-II MS, Autof MS 1000 and VITEK 2 ANC card were 94.2%, 94.2%, 98.6% and 94.9%, respectively, while that at genus level were 99.3%, 100%, 100% and 97.8%, respectively. Metronidazole and chloramphenicol were the most susceptible agents (99.3% and 92.8%, respectively), followed by meropenem, ertapenem, imipenem and piperacillin/tazobactam to which the susceptible rates ranged from 76.8% to 79.0%. The susceptible rates to carbapenems decreased 12.4-15.3% from 2010-2013 to 2014-2017.

CONCLUSION

All the four systems provided high accurate rate on the identification of B. fragilis group isolates. Metronidazole showed highest activity against these isolates. Attention should be paid to the higher resistant rates to carbapenems, clindamycin, moxifloxacin and tigecycline than the other countries.

Evaluation of modified saponin preparation method for the direct identification and antimicrobial susceptibility testing from positive blood culture

BACKGROUND

We evaluated the two in-house sample preparation methods (saponin method (SAP) and [saponin + Sputazyme] method (SSPZ)) for direct identification of microorganisms using MALDI-TOF MS from positive blood culture bottles. Also, we evaluated the [saponin + Sputazyme] method for direct antimicrobial susceptibility testing (AST) using Vitek 2 system.

METHODS

For direct identification, 163 prospective, monomicrobial positive blood culture bottles and 25 contrived blood culture bottles spiked with 25 infrequently isolated bacterial strains were included. For direct AST, pellets obtained by SSPZ method from 102 prospective blood culture bottles were tested. The results from the direct identification and AST were compared with those from the routine diagnostic method performed with colonies sub cultured on solid media.

RESULTS

In 163 prospective specimens, SAP method correctly identified 132/163 (81.0%) isolates and SSPZ method correctly identified 148/163 (90.8%) isolates (P = .018). Among the 92 Gram-positive isolates, the correct identification rate was significantly higher with the SSPZ method than the SAP method (92.4% vs. 81.5%), respectively (P = .041). However, the SSPZ method failed to identify Streptococcus pneumoniae. Among the 64 Gram-negative isolates, the correct identification rate was 82.8% (53/64) and 87.5% (56/64) for the former and the latter method, respectively (P = .491). Compared with standard methods direct AST showed 98.5% (1523/1547) agreement.

CONCLUSION

The addition of Sputazyme improved the identification of commonly isolated bacteria, especially for Gram-positive isolates and yeasts and can be applied for direct antimicrobial susceptibility testing of bacteria. Although SAP method showed better results for Campylobacter spp. and anaerobic bacteria, considering their very low incidence, routine use of SSPZ will be more practical.

Simple Sample Preparation Method for Direct Microbial Identification and Susceptibility Testing From Positive Blood Cultures

Rapid identification and determination of the antibiotic susceptibility profiles of the infectious agents in patients with bloodstream infections are critical steps in choosing an effective targeted antibiotic for treatment. However, there has been minimal effort focused on developing combined methods for the simultaneous direct identification and antibiotic susceptibility determination of bacteria in positive blood cultures. In this study, we constructed a lysis-centrifugation-wash procedure to prepare a bacterial pellet from positive blood cultures, which can be used directly for identification by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) and antibiotic susceptibility testing by the Vitek 2 system. The method was evaluated using a total of 129 clinical bacteria-positive blood cultures. The whole sample preparation process could be completed in <15 min. The correct rate of direct MALDI-TOF MS identification was 96.49% for gram-negative bacteria and 97.22% for gram-positive bacteria. Vitek 2 antimicrobial susceptibility testing of gram-negative bacteria showed an agreement rate of antimicrobial categories of 96.89% with a minor error, major error, and very major error rate of 2.63, 0.24, and 0.24%, respectively. Category agreement of antimicrobials against gram-positive bacteria was 92.81%, with a minor error, major error, and very major error rate of 4.51, 1.22, and 1.46%, respectively. These results indicated that our direct antibiotic susceptibility analysis method worked well compared to the conventional culture-dependent laboratory method. Overall, this fast, easy, and accurate method can facilitate the direct identification and antibiotic susceptibility testing of bacteria in positive blood cultures.