Histology of NeoMTA Plus and Quick-Set2 in Contact with Pulp and Periradicular Tissues in a Canine Model

Clinical and radiographic comparison of primary molar pulpotomy using formocresol, portland cement, and NeoMTA plus: a randomized controlled clinical trial

The present study aimed to compare the clinical and radiographic success rates of Formocresol (FC), Portland Cement (PC), and NeoMTA Plus in primary molar pulpotomy. Ninety-six primary molars in ninety-six children aged 3‒9 years were randomly assigned to FC, PC, and NeoMTA Plus groups. Radiographic and clinical follow-up evaluations were performed at six and twelve months. After six and twelve months, clinical success rates were 100% in the three groups. The radiographic success rates in the 6-month follow-up were 96.7 and 96.7% in the FC and PC groups and 100% in the NeoMTA Plus group. At 12 months, radiographic success rate was 93.8, and 93.8% in the FC and PC groups and 96.9% in the NeoMTA Plus group. There were no significant differences between the three groups at all follow-up evaluations. NeoMTA Plus showed highest success rate, clinically and radiographically. PC and NeoMTA Plus can be considered as an alternative to FC.

Histological Evaluation of Photobiomodulation and Calcium Aluminosilicate on Direct Pulp Capping of Dogs' Permanent Teeth

Introduction: Photobiomodulation (PBM) is beneficial to biological tissues; depending on the optical dose that is absorbed by tissues, it can function as a biostimulative, analgesic, and anti-inflammatory mediator. Thus, the current research aimed to assess the impacts of PBM and Calcium aluminosilicate-based material on direct pulp capping (DPC) of dogs' permanent teeth through histological analysis. Methods: To study DPC of dogs' teeth, we separated 24 canines and premolars obtained from mature, healthy mongrel dogs into four equal groups: group 1, which served as the control (exposed pulp was covered with a sterile polytetrafluoroethylene, Teflon tape); group 2, which received PBM treatment using a 980 nm diode laser with a 100 mw output power for one minute; group 3: Calcium aluminosilicate-based material; group 4: Calcium aluminosilicate+PBM. In accordance with the assessment period, each group was divided into three equal subcategories: (A) 1 week; (B) 2 months; (C) 3 months. The teeth were evaluated histologically for inflammatory response and dentine bridge formation. Results: Statistical analysis detected that there was a significant difference between PBM, Calcium aluminosilicate cement, and the combination group of PBM and Calcium aluminosilicate related to the control group in variant evaluation periods regarding the inflammatory response and dentine bridge thickness through the histological analysis. In relation to the inflammatory response after one week, the combined group (Calcium silicate cement+PBM) exhibited a significantly decreased intensity of inflammation compared to other groups at an identical time. As for dentin bridge creation, the PBM+calcium aluminosilicate group detected thicker dentine bridge creation at three months than other studied groups. Conclusion: Combined with calcium aluminosilicate-based material, PBM using a 980 nm diode laser with output power of 100 mw for one minute decreased the initial inflammatory response and enhanced a complete thick dentine bridge formation.

Impact of different disinfection protocols on the bond strength of NeoMTA 2 bioceramic sealer used as a root canal apical plug (in vitro study)

INTRODUCTION

Treatment of an immature permanent tooth required a special disinfection protocol due to the presence of thin radicular walls, which are prone to fracture. Mineral Trioxide Aggregate (MTA) has been proposed as a root repair material for root canal treatment. The aim of this in vitro study was to compare the push-out bond strength of conventional White MTA cements and second generation NeoMTA 2 in imitated immature roots treated with different disinfection protocols, which are 5.25% sodium hypochlorite (NaOCl), followed by 17% ethylenediaminetetraacetic acid (EDTA), and NaOCl, followed by 20% etidronic acid (HEBP).

METHODS

The root canals of freshly extracted single-root teeth were manually prepared until 90 K-file to imitate immature roots. Roots were randomly divided into four groups (G) according to the disinfection protocol (n = 15 per group). where G1 (NaOCl + EDTA + White MTA) and G2 (NaOCl + EDTA + NeoMTA 2) While G3 (NaOCl + HEBP + White MTA) and G4 (NaOCl + HEBP + NeoMTA 2) All groups were activated with manual agitation. All specimens were incubated for 48 h. The apical third of each root was perpendicularly sectioned to attain a slice of 3 mm thickness. Push-out bond strength values were assessed using a two-way ANOVA and a Student's t test.

RESULTS

G3 and G4 that were treated with HEPB showed higher significant push-out bond strength mean values than G1 and G2 treated with an EDTA chelating agent. Irrespective of the chelating agent used, it was found that both NeoMTA 2 and White MTA had no significant influence on push-out bond strength mean values (p ≤ 0.05).

CONCLUSION

The combined use of 5.25% NaOCl and 20% HEBP increased the push-out strength values of both NeoMTA 2 and White MTA, rendering them suitable to be used as an alternative chelating agent to EDTA.

Effects of vehicles on the physical properties and biocompatibility of premixed calcium silicate cements

Premixed calcium silicate cements (pCSCs) contain vehicles which endow fluidity and viscosity to CSCs. This study aimed to investigate the effects of three vehicles, namely, polyethylene glycol (PEG), propylene glycol (PG), and dimethyl sulfoxide (DMSO), on the physicochemical properties and biocompatibility of pCSCs. The setting time, solubility, expansion rate, and mechanical strength of the pCSCs were evaluated, and the formation of calcium phosphate precipitates was assessed in phosphate-buffered saline (PBS). The effects of pCSC extracts on the osteogenic differentiation of mesenchymal stem cells (MSCs) were investigated. Finally, the tissue compatibility of pCSCs in rat femurs was observed. CSC containing PEG (CSC-PEG) exhibited higher solubility and setting time, and CSC-DMSO showed the highest expansion rate and mechanical strength. All pCSCs generated calcium phosphate precipitates. The extract of CSC-PG induced the highest expressions of osteogenic markers along with the greatest calcium deposites. When implanted in rat femurs, CSC-PEG was absorbed considerably, whereas CSC-PG remained relatively unaltered inside the femur.

The osteoinductive potential of different root-filling materials in a rat femur model

In pediatric dentistry, the enduring success of root-end filling materials employed for the establishment of apical plugs in immature teeth undergoing endodontic intervention is contingent upon their possessing a robust osteoinductive capacity. Hence, the primary objective of this study was to histologically assess the osteoinductive potential of four distinct dental materials, specifically recommended for retrograde filling applications, utilizing an animal hard tissue model. Within the designed experimental model, two bone defects measuring 2 mm in diameter and 2 mm in depth were created in both femurs of a cohort comprising 21 male Wistar albino rats. The first defect in the right femur was left blank as the control group, and Neo MTA Plus was placed in the second defect. The EndoSequence BCRRM Fast Set Putty was placed in the first of the defects on the left femur, and Endo Repair was placed in the second defect. Subjects were sacrificed after 7, 14, and 28 days of follow-up, and sections were examined to assess the degree of inflammation, connective tissue formation, and new bone formation. The data were statistically evaluated with Kruskal‒Wallis and post hoc Dunn's tests using SPSS 12 software. The bone healing levels of the Neo MTA Plus group were significantly higher than those of the other groups in all periods (p < 0.05). Bone organization in all groups decreased over time, and fibrous tissue was enriched. The results of this study demonstrate that NeoMta Plus has superior osteoinductive properties compared to other materials but that EndoSequence and Endo Repair have the potential to be developed.

A paradigm shift from calcium hydroxide to bioceramics in direct pulp capping: A narrative review

For many years, calcium hydroxide (CH) was the preferred material for direct pulp capping (DPC), occupying an elevated position. The collapse of this paradigm is due to the emergence of bioceramics with less pulpal inflammation and superior mineralization abilities than CH. The goal of the current article was directed to: (1) review the history of DPC "the idea of an exposed pulp as a hopeless organ has given way to one of healing and optimism," (2) classify the bioceramics in dentistry, and (3) explain and compare the mechanism by which dentin barriers for CH and bioceramics are formed. A comprehensive literature search of the database was conducted using PubMed, Google Scholar, and Scopus utilizing the following terms: Biodentine, calcium hydroxide, calcium aluminate, calcium phosphate, calcium silicate, direct pulp capping, NeoMTA Plus, Quick-Set2, and TotalFill. Reference mining of the selected publications was utilized to discover other studies and strengthen the results. Only works written in English were taken into consideration, and there were no restrictions on the year of publication. Bioceramic materials might be used as an intriguing substitute for CH. Compared to CH, they induced more positive pulpal reactions.

Clinical outcomes of non-surgical root canal obturations using NeoMTA: A retrospective series of case reports

NeoMTA is a commercially available tricalcium silicate-based cement intended for contact with pulp and periradicular tissues. The purpose of this study was to retrospectively evaluate the outcomes of non-surgical root canal treatments with NeoMTA obturations. Patients were treated in a private endodontic practice between 2015 and 2018. All cases, including initial treatments and retreatments, were either fully obturated with NeoMTA, or using gutta-percha with NeoMTA as an endodontic sealer. Outcomes were assessed using follow-up examination data with digital periapical radiographs with a minimum of a 1-year recall. Teeth were classified based on the clinical examination as: healed/healing (success), or non-healed (failure). 265 teeth were included with an average follow-up time of 1.3 years. The overall success rate was 91.7%. Only the presence of a pre-operative periapical radiolucency was found to significantly affect success. Comparison of obturation techniques demonstrated no effect on outcomes. NeoMTA is suitable for endodontic obturation.

Functional expression of oxytocin receptors in pulp-dentin complex

Dental pulp-derived stromal cells (DPSCs) are a crucial cell population for maintaining the tissue integrity of the pulp-dentin complex. The oxytocin receptor (OXTR), a member of the G protein-coupled receptor (GPCR) superfamily, plays versatile roles in diverse biological contexts. However, the role of OXTR in dental pulp has not yet been fully understood. Here, we demonstrate the biological functions and significance of OXTR in DPSCs through a multidisciplinary approach. Microarray data of 494 GPCR genes revealed high OXTR expression in human DPSCs (hDPSCs). Blocking OXTR activity increased the expression of osteogenic and odontogenic marker genes, promoting hDPSC differentiation. Additionally, we found that OXTR is involved in extracellular matrix (ECM) remodeling through the regulation of the gene expression related to ECM homeostasis. We further demonstrated that these genetic changes are mediated by trascriptional activity of Yes-associated protein (YAP). Based on the results, a preclinical experiment was performed using an animal model, demonstrating that the application of an OXTR inhibitor to damaged pulp induced significant hard tissue formation. These results provide new insight into the oxytocin-OXTR system in the regenerative process of pulp-dentin complex.

Biocompatibility and mineralization potential of new calcium silicate cements

Background/purpose

As calcium silicate cements (CSCs) have been successfully used in various types of vital pulp therapy, many new CSC products have been developed. The aim of this study was to evaluate the biocompatibilities and mineralization potential of new CSC. The experimental materials were NeoMTA Plus and EndoSequence Root Repair Material-Fast Set Putty (ERRM-FS) which were compared to ProRoot MTA.

Materials and methods

In vitro, the effects of the new CSC on stem cells were evaluated. Each CSC was prepared for cell viability testing, alkaline phosphatase (ALP) assay, and calcium ion release assay. In vivo, the exposed pulp model was used for the partial pulpotomy procedure. Thirty-six teeth were treated with three materials: ProRoot MTA, NeoMTA Plus, or ERRM-FS. After four weeks, the teeth were extracted and processed for histologic analysis. Dentin bridge formation, pulp inflammation, and odontoblastic cell layer were evaluated and the area of newly formed calcific barrier of each group was measured.

Results

Three CSCs demonstrated similar cell viability on stem cells and the levels of ALP and calcium release were not significantly different between tested materials. ProRoot MTA and ERRM-FS showed better tissue healing process than NeoMTA Plus after partial pulpotomy, in terms of quality of calcific barrier and pulp inflammation. The outcomes from measuring newly formed calcific area demonstrated no significant differences between the materials.

Conclusion

NeoMTA Plus and ERRM-FS displayed similar biocompatibilities and mineralization potential compared to ProRoot MTA. Therefore, these new CSCs can be used as desirable alternatives to ProRoot MTA.

4-Year Follow-up of Full Pulpotomy in Symptomatic Mature Permanent Teeth with Carious Pulp Exposure Using a Stainproof Calcium Silicate-based Material

INTRODUCTION

This study aimed to assess the pulpal and restorative outcome of full pulpotomy in symptomatic mature permanent teeth with carious pulp exposure over 4 years.

METHODS

Under local anesthesia, full pulpotomy was performed using the aseptic technique and a stainproof calcium silicate-based material (NeoMTA Plus; Avalon Biomed Inc, Bradenton, FL). The pain level was scored preoperatively and at 1 week posttreatment. Clinical and radiographic evaluation was performed at 6 months, 1, 2, and 4 years. Kaplan-Meier survival analysis and Cox proportional hazards regression were used to analyze the data. Failed cases were classified as endodontic or restorative failure.

RESULTS

Full pulpotomy was completed in 109 teeth in 90 patients with an age range of 14-60 years (mean = 25 years). The study sample available for follow-up was 100 teeth in 86 patients with a recall rate above 90%. Preoperative pulp diagnosis was reversible pulpitis in 39 teeth and irreversible pulpitis in 61 teeth. The cumulative survival rates of pulpotomy were generally high (ie, 98%, 97.4%, 93%, and 83.8% at 6 months and 1, 2, and 4 years, respectively). The overall mean survival time of pulpotomy was 3.89 years (95% confidence interval, 3.84-3.95). The mean survival time was significantly higher for patients aged ≤25 years. However, in the multivariate analysis, the only significant predictor of pulpotomy failure was severe preoperative pain. Over the 4 years, 23 cases failed; only 10 of 23 failures were classified as endodontic failure, and the success of pulpotomy can be assumed to be 90%.

CONCLUSIONS

Full pulpotomy in cariously exposed pulp of mature permanent teeth sustained a high success rate over 4 years. The coronal seal is crucial for long-term survival.

PRIASE 2021 guidelines for reporting animal studies in Endodontology: explanation and elaboration

Laws and ethics require that before conducting human clinical trials, a new material, device or drug may have to undergo testing in animals in order to minimize health risks to humans, unless suitable supporting grandfather data already exist. The Preferred Reporting Items for Animal Studies in Endodontology (PRIASE) 2021 guidelines were developed exclusively for the specialty of Endodontology by integrating and adapting the ARRIVE (Animals in Research: Reporting In Vivo Experiments) guidelines and the Clinical and Laboratory Images in Publications (CLIP) principles using a validated consensus-based methodology. Implementation of the PRIASE 2021 guidelines will reduce potential sources of bias and thus improve the quality, accuracy, reproducibility, completeness and transparency of reports describing animal studies in Endodontology. The PRIASE 2021 guidelines consist of a checklist with 11 domains and 43 individual items and a flowchart. The aim of the current document is to provide an explanation for each item in the PRIASE 2021 checklist and flowchart and is supplemented with examples from the literature in order for readers to understand their significance and to provide usage guidance. A link to the PRIASE 2021 explanation and elaboration document and PRIASE 2021 checklist and flowchart is available on the Preferred Reporting Items for study Designs in Endodontology (PRIDE) website (http://pride-endodonticguidelines.org/priase/).

In vivo Biocompatibility and Bioactivity of Calcium Silicate-Based Bioceramics in Endodontics

Endodontic therapy aims to preserve or repair the activity and function of pulp and periapical tissues. Due to their excellent biological features, a substantial number of calcium silicate-based bioceramics have been introduced into endodontics and simultaneously increased the success rate of endodontic treatment. The present manuscript describes the in vivo biocompatibility and bioactivity of four types of calcium silicate-based bioceramics in endodontics.

The Effectiveness of Laser-Activated Irrigation on the Apical Microleakage Qualities of MTA Repair HP and NeoMTA Plus in Simulated Immature Teeth: A Comparative Study

There are limited data regarding the potential effect of erbium, chromium: yttrium–scandium–gallium–garnet (Er,Cr:YSGG) laser-activated irrigation (LAI) on the microleakage qualities of calcium silicate-based cements. The objective of the present study was to assess the effect of LAI on the microleakage qualities of MTA Repair HP (MTA-HP) and NeoMTA Plus (Neo) used in root-end filling and to compare the antimicrobial effectiveness of MTA- HP. Two experimental sets were conducted: antimicrobial activity (agar diffusion test/at 24, 48 h) and microleakage (glucose leakage model/at 1st, 10th, 20th days). Antimicrobial activities of MTA-HP, Neo, Biodentine, ProRoot and MTA Angelus were evaluated, and inhibition zones were observed not only against a range of Gram-positive and Gram-negative bacteria but also against yeast at 48h. For microleakage evaluation, fifty teeth were prepared to simulate the clinical situation where the root-tips (apex) are open, and randomly divided into two experimental groups (n = 20/group) according to the cement type (MTA-HP and Neo), and two control (n = 5/group) groups. Each experimental group was further divided into two subgroups (n = 10/group) with respect to LAI: MTA-HP, L-HP, Neo, L-Neo. A statistical difference was only detected between Neo and L-HP groups on day 1. Subsequently, MTA-HP exhibited superior microleakage quality compared to Neo in the short-term. Er,Cr:YSGG laser-activated irrigation could be used as a reliable technique without creating adverse effects on the sealing abilities of MTA Repair HP and NeoMTA Plus.

Biological and microbiological behavior of calcium aluminate cement-based blend for filling of bone defects

Calcium aluminate cement (CAC) as a biomaterial has been evaluated for its physical, mechanical and biocompatibility properties. Furthermore, the application of CAC for bone repair is due to its composition and coefficient of thermal expansion, which is similar to that of human bone. Thus, the aim of this study was to evaluate compositions of CAC-based blends as substitutes for bone defects. Five compositions of blends (alumina, zirconia, hydroxyapatite, tricalcium phosphate, chitosan), in addition to the base cement consisting of homogeneous CAC were evaluated as a substitute for bone repair. Additionally, the monotypic biofilm formation was assessed. Creation of a monocortical bone defect was performed on the femurs of rats, which were randomly filled with the different materials. The polymethylmethacrylate (PMMA) group was used as a control. All the animals were euthanized 04 weeks after the surgery procedure. Subsequently, computerized microtomography, histological and histomorphometric analyses were performed to verify the bone repair. To evaluate the formation of biofilms, reference strains of Staphylococcus aureus, Streptococcus mutans and Pseudomonas aeruginosa were cultured on the samples, and the biofilm formed was quantified by the MTT method. In the microtomography and histomorphometry results, it was observed that the blends exhibited better results than the control group, with statistically significant differences (p < 0.05) for alumina and zirconia blends. In the biofilm formation, a statistical difference (p < 0.05) in general was observed between the alumina blends and the control group (p < 0.05). It was concluded that CAC-based blends with alumina and zirconia are promising for use in fillings for bone repair.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.