Sensitive determination of ketoprofen using flow injection with chemiluminescence detection

Development of activated carbon from Schizolobium parahyba (guapuruvu) residues employed for the removal of ketoprofen

Schizolobium parahyba species can be found in all of South America, producing several residues that can be a major opportunity to develop activated carbon. This work presents the investigation regarding the development of a high specific surface activated carbon (981.55 m² g^-1) and its application in the adsorption of ketoprofen from the aqueous media. The ketoprofen molecules were better adhered to the adsorbent surface under acidic conditions (pH = 2), being the ideal adsorbent dosage determined as 0.7 g L^-1, resulting in satisfactory values. It was found that the system reached equilibrium in 200 to 250 min depending on the initial concentration studied, achieving an adsorption capacity of 229 mg g^-1. The general order was the most suitable model for describing the experimental data, with an R² ≥ 0.9985 and MSR ≤ 63.40 (mg g^-1)². The equilibrium adsorption found that the temperature increases the adsorption capacity, achieving 447.35 mg g^-1 at 328 K. Besides that, the Tóth model was the most suitable for describing the isotherms R² ≥ 0.9990 and MSR ≤ 25.67 (mg g^-1)², indicating a heterogeneous adsorbent. The thermodynamic values found that the adsorption of ketoprofen is spontaneous (average ΔG⁰ of - 32.79 kJ mol^-1) and endothermic (ΔH⁰ 10.44 kJ mol^-1). The treatment of simulated effluent with the developed adsorbent was efficient, removing 90% of ketoprofen, ibuprofen, and salts. It was found that the adsorbent is reaming its adsorption capacity up to the 5th cycle, progressively decreasing the adsorption capacity until the adsorption does not occur past the 12th cycle. Overall, the results demonstrated that the activated carbon from residual biomass of the Schizolobium parahyba species could be an excellent alternative in obtaining an effective adsorbent to treat wastewater-containing drugs.

Optical Detection of Ketoprofen by Its Electropolymerization on an Indium Tin Oxide-Coated Optical Fiber Probe

In this work an application of optical fiber sensors for real-time optical monitoring of electrochemical deposition of ketoprofen during its anodic oxidation is discussed. The sensors were fabricated by reactive magnetron sputtering of indium tin oxide (ITO) on a 2.5 cm-long core of polymer-clad silica fibers. ITO tuned in optical properties and thickness allows for achieving a lossy-mode resonance (LMR) phenomenon and it can be simultaneously applied as an electrode in an electrochemical setup. The ITO-LMR electrode allows for optical monitoring of changes occurring at the electrode during electrochemical processing. The studies have shown that the ITO-LMR sensor’s spectral response strongly depends on electrochemical modification of its surface by ketoprofen. The effect can be applied for real-time detection of ketoprofen. The obtained sensitivities reached over 1400 nm/M (nm·mg⁻¹·L) and 16,400 a.u./M (a.u.·mg⁻¹·L) for resonance wavelength and transmission shifts, respectively. The proposed method is a valuable alternative for the analysis of ketoprofen within the concentration range of 0.25–250 μg mL⁻¹, and allows for its determination at therapeutic and toxic levels. The proposed novel sensing approach provides a promising strategy for both optical and electrochemical detection of electrochemical modifications of ITO or its surface by various compounds.

CdS nanoparticles-enhanced chemiluminescence and determination of baicalin in pharmaceutical preparations

CdS nanoparticles (CdS NPs) of different sizes were synthesized by the citrate reduction method. It was found that CdS NPs could enhance the chemiluminescence (CL) of the luminol-potassium ferricyanide system and baicalin could inhibit CdS NPs-enhanced luminol-potassium ferricyanide CL signals in alkaline solution. Based on this inhibition, a flow-injection CL method was established for determination of baicalin in pharmaceutical preparations and human urine samples. Under optimized conditions, the linear range for determination of baicalin was 5.0 x 10(-6) to 1.0 x 10(-3) g/L. The detection limit at a signal-to-noise ratio of 3 was 1.7 x 10(-6) g/L. CL spectra, UV-visible spectra and transmission electron microscopy (TEM) were used to investigate the CL mechanism. The method described is simple, selective and obviates the need of extensive sample pretreatment.

Flow injection chemiluminescence determination of loxoprofen and naproxen with the acidic permanganate-sulfite system

A novel flow injection chemiluminescence (CL) method for the determination of loxoprofen and naproxen was proposed based on the CL system of KMnO₄, and Na₂SO₃ in acid media. The CL intensity of KMnO₄-Na₂SO₃ was greatly enhaneed in the presence of loxoprofen and naproxen. The mechanism of the CL reaction was studied by the kinetic proecss and UV-vis absorption and the conditions were optimized. Under optimized conditions, the CL intensity was linear with loxoprofen and naproxen concentration in the range of 7.0 × 10⁻⁸ – 1.0 × 10⁻⁵ g/mL and 2.0 × 10⁻⁷ – 4.0 × 10⁻⁶ g/mL with the detection limit of 2.0 × 10⁻⁸ g/mL and 3.0 × 10⁻⁸ g/mL (S/N = 3), respectively. Thc relative standard deviations were 2.39% and 1.37% for 5.0 × 10⁻⁷ g/mL naproxen and 5.0 × 10⁻⁷ g/mL loxoprofen (n = 10), respectively. The proposed method was satisfactorily applied to thc determination of loxoprofen and naproxen in pharmaceutical preparations.

Flow injection analysis of ketoprofen based on the order transform second chemiluminescence reaction

This paper explores an order-transform-second-chemiluminescence (OTSCL) method combining the flow injection technique for the determination of ketoprofen. When ketoprofen solution was injected into the mixture after the end of the reaction of alkaline luminol and sodium periodate or sodium periodate solution was injected into the reaction mixture of ketoprofen and alkaline luminol, a new chemiluminescence (CL) reaction was initiated and strong CL signal was detected. A mechanism for the OTSCL has been proposed on the basis of the chemiluminescence kinetic characteristic, UV-visible absorption and chemiluminescent spectra. Under optimal experimental conditions, the CL response is proportional to the concentration of ketoprofen over the range of 2.0×10(-7) to 1.0×10(-5)mol/L with a correlation coefficient of 0.9950 and a detection limit of 8.0×10(-9)mol/L (3σ). The relative standard deviation for 11 repetitive determinations of 1.0×10(-6)mol/L ketoprofen is 2.9%. The utility of this method was demonstrated by determining ketoprofen in pharmaceutical formulations without interference from its potential impurities.

Flow injection determination of benzhexol based on its sensitizing effect on the chemiluminescent reaction of Ce(IV)-sulfite

In this paper, a novel chemiluminescent (CL) method for the determination of benzhexol has been developed by combining the flow injection technique and its sensitizing effect on the weak CL reaction between sulfite and acidic cerium(IV). A mechanism for the CL reaction has been proposed on the basis of CL spectra. Under the optimized conditions, the proposed method allows the measurement of benzhexol hydrochloride over the range 0.1-10 microg/mL with a correlation coefficient of 0.9992 (n = 8), a detection limit of 0.02 microg/mL (3sigma), and a relative standard deviation for 2.0 microg/mL benzhexol (n = 11) of 1.65%. The utility of this method was demonstrated by determining benzhexol hydrochloride in tablets.

Acidic potassium permanganate as a chemiluminescence reagent—A review

A critical and comprehensive review of acidic potassium permanganate chemiluminescence is presented. This includes discussion on reaction conditions, the influence of enhancers such as polyphosphates, formaldehyde and sulfite, the relationship between analyte structure and chemiluminescence intensity, and the application of this chemistry to determine a wide variety of compounds, such as pharmaceuticals, biomolecules, antioxidants, illicit drugs, pesticides and pollutants. Previous proposals for the nature of the emitting species are re-evaluated in light of recent evidence.