A green, and eco-friendly bionanocomposite film (poly(vinyl alcohol)/TiO2/chitosan/chlorophyll) by photocatalytic ability, and antibacterial activity under visible-light irradiation

Preparation of O-g-C3N4 nanowires/Bi2O2CO3 porous plate composite photocatalysts for the efficient degradation of tetracycline hydrochloride in wastewater

Both g-C3N4 and Bi2O2CO3 are good photocatalysts for the removal of antibiotic pollutants, but their morphological modulation and catalytic performance need to be further improved. In this study, the calcination-hydrothermal method is used to prepare a O-g-C3N4@Bi2O2CO3 (CN@BCO) composite photocatalyst from dicyandiamide and bismuth nitrate. The prepared catalyst is characterized through various methods, including X-ray diffraction (XRD) and transmission electron microscopy (TEM). Further, the effects of different parameters, such as catalyst concentration and initial pH of the reaction solution, on its photocatalytic activity are investigated. The results show that the CN@BCO sample achieves an optimal degradation rate of 98.1% for tetracycline hydrochloride (TCH) with a concentration of 20 mg/L and a removal rate of 69.4% for total organic carbon (TOC) at 40 min. The quenching experiments show that ·O2-, h+, and ·OH participate in the photocatalytic process, with ·O2- being the most dominant active species. The toxicity of the predicted TCH degradation intermediates is analyzed using Toxicity Estimation Software Tool (TEST). Overall, the CN@BCO composite exhibits excellent photocatalytic performance, making it a promising candidate for environmental purification and wastewater treatment.

Sustainable chitosan-based materials as heterogeneous catalyst for application in wastewater treatment and water purification: An up-to-date review

Water pollution is one of serious environmental issues due to the rapid development of industrial and agricultural sectors, and clean water resources have been receiving increasing attention. Recently, more and more studies have witnessed significant development of catalysts (metal oxides, metal sulfides, metal-organic frameworks, zero-valent metal, etc.) for wastewater treatment and water purification. Sustainable and clean catalysts immobilized into chitosan-based materials (Cat@CSbMs) are considered one of the most appealing subclasses of functional materials due to their high catalytic activity, high adsorption capacities, non-toxicity and relative stability. This review provides a summary of various upgrading renewable Cat@CSbMs (such as cocatalyst, photocatalyst, and Fenton-like reagent, etc.). As for engineering applications, further researches of Cat@CSbMs should focus on treating complex wastewater containing both heavy metals and organic pollutants, as well as developing continuous flow treatment methods for industrial wastewater using Cat@CSbMs. In conclusion, this review abridges the gap between different approaches for upgrading renewable and clean Cat@CSbMs and their future applications. This will contribute to the development of cleaner and sustainable Cat@CSbMs for wastewater treatment and water purification.

Starch/chitosan nanoparticles bionanocomposite membranes for methylene blue dye removal

This research aims to develop relatively new membranes from starch biopolymer incorporated with different concentrations (0, 5, 10, 15, 20% w/w of solid starch) of chitosan nanoparticles (CNP) that can be used for water treatment. The membranes were fabricated using the solvent casting method while the CNP was produced using the ionic gelation method. The membranes were characterized in terms of morphology, porosity, water vapor permeability (WVP), and water contact angle. The application of the membranes to treat water was demonstrated on methylene blue solution because methylene blue is a commonly used dye in many industries. It was found that the starch/10% CNP membrane was the optimum membrane for methylene blue dye treatment because the membrane exhibits a smooth surface, high WVP (1.67 × 10-10g Pa-1h-1m-1), high porosity (59.92%), low water contact angle value (44.8°), and resulted in the highest percentage removal of methylene blue (94.0%) after the filtration. After filtration, the starch/10% CNP membrane was still in good condition without breakage. In conclusion, the starch/CNP membranes produced in this study are promising for sustainable and environmentally friendly water treatment, especially for water containing methylene blue dye. This research aligns with current thematic trends in bionanohybrid composite materials utilization, offering innovative solutions for addressing water pollution challenges.

High-efficiency removal of pyrethroids using a redesigned odorant binding protein

Pyrethroids are ubiquitously present in environmental media and threaten both the ecosystem and human health. To explore effective ways to remove pyrethroids from the environment, an odorant binding protein (OBP) with affinity for various pyrethroids was investigated. Initially, the target OBP, Spodoptera littoralis pheromone binding protein 1 (SlitPBP1), underwent redesign to enhance its affinity for pyrethroids. The modified SlitPBP1E97ND106E demonstrated a substantially increased affinity for deltamethrin (DeltaM), with a dissociation constant of 0.77 ± 0.17 μM. The affinity of SlitPBP1E97ND106E for other pyrethroids also increased to varying extents. Consequently, SlitPBP1E97ND106E displayed a markedly enhanced capability to adsorb and remove pyrethroids. When exposed to free SlitPBP1E97ND106E in solution, the reduction in DeltaM surged from 16.78 ± 0.32% to 97.51 ± 0.56%. SlitPBP1E97ND106E was immobilized by coupling the protein to Ni2+-NTA agarose resin. Liquid chromatography results attested to the superior efficacy of immobilized SlitPBP1E97ND106E in removing pyrethroids, especially DeltaM. No significant differences in pyrethroid removal were detected across various water samples. Our findings introduce a potent tool for pyrethroid removal. A wider range of OBPs can similarly be optimized and applied to remove organic pollutants, including but not limited to pesticides.

In vitro and in vivo investigations on arsenic-induced cartilage degeneration in osteoarthritis

Heavy metals found in the environment, including arsenic (As) pose significant risks to human health and present a risk factor for osteoarthritis (OA). This study researched the impact of As on cartilage degeneration by focusing on the role of As in causing OA in mice. We employed chemical inhibition and inductively coupled plasma mass spectrometry analyses to identify the effect of As on chondrocytes as well as studying its accumulation in organs after oral administration in mice. Additionally, the study examined the effect of intra-articular As treatment on the levels of crucial catabolic factors, namely Hif-2α (Epas1) and Zip8 (Slc39a8), during OA progression. Mice that were administered As orally in conjunction with surgically induced joint instability, had heightened cartilage destruction compared to wild-type mice. Quantitative analysis revealed a significant increase in Hif-2α and Zip8 mRNA expression (p = 0.0352,0.0004 respectively) and protein expression (p = 0.0101,0.008 respectively) post oral administration. Our findings illustrated the role of As in influencing crucial cellular functions that are triggered by reactive oxygen species. These events consequently activate the Akt/Hif-2α/NF-κB pathways, leading to disruptions in articular cartilage homeostasis. This study provides a comprehensive understanding of the impact of As on the development of osteoarthritis.

MOF-derived Co-Ni layered double hydroxides/polyethyleneimine modified chitosan micro-nanoreactor for high-efficiency capture of uranium from seawater

The preparation of powder adsorbent into microsphere adsorbent is one of the effective methods for the industrialization of uranium extraction from seawater. Herein, a MOF-derived Co-Ni layered double hydroxides/polyethyleneimine modified chitosan micro-nanoreactor (DNPM) was prepared by a simple method in this work. The microstructure and chemical structure of DNPM were comprehensively characterized. The pH value, adsorption time, initial solution concentration, temperature, competitive ions, regeneration performance, and bed column heights were investigated for the adsorption performance of DNPM by batch adsorption and fixed-bed column continuous adsorption experiments. When the contact time was 8 h, the initial concentration was 150 mg/L, and the pH value was 6, the adsorption capacity of DNPM was 334.67 mg/g. The uranium adsorption by DNPM fits with the pseudo-second-order kinetic and Langmuir models, which was a spontaneous and endothermic process. In addition, DNPM has good adsorption selectivity and reusability. The fixed-bed column continuous adsorption experiment shows that the adsorption capacity increased with the increase of bed column height. The adsorption mechanism can be attributed to coordination chelation and electrostatic interaction. In general, this work provides an effective strategy for developing environmentally friendly uranium adsorbent that can be industrially used.

Complete oxidative degradation of diclofenac via coupling free radicals and oxygenases of a micro/nanostructured biogenic Mn oxide composite from engineered Pseudomonas sp. MB04R-2

Oxidative degradation can effectively degrade aromatic emerging contaminants (ECs). However, the degradability of lone inorganic/biogenic oxides or oxidases is typically limited when treating polycyclic ECs. Herein, we report a dual-dynamic oxidative system comprising engineered Pseudomonas and biogenic Mn oxides (BMO), which completely degrades diclofenac (DCF), a representative halogen-containing polycyclic EC. Correspondingly, recombinant Pseudomonas sp. MB04R-2 was constructed via gene deletion and chromosomal insertion of a heterologous multicopper oxidase cotA, allowing for enhanced Mn(II)-oxidizing activity and rapid formation of the BMO aggregate complex. Additionally, we characterized it as a micro/nanostructured ramsdellite (MnO₂) composite using multiple-phase composition and fine structure analyses. Furthermore, using real-time quantitative polymerase chain reaction, gene knockout, and expression complementation of oxygenase genes, we demonstrated the central and associative roles of intracellular oxygenases and cytogenic/BMO-derived free radicals (FRs) in degrading DCF and determined the effects of FR excitation and quenching on the DCF degradation efficiency. Finally, after identifying the degraded intermediates of ²H-labeled DCF, we constructed the DCF metabolic pathway. In addition, we evaluated the degradation and detoxification effects of the BMO composite on DCF-containing urban lake water and on biotoxicity in zebrafish embryos. Based on our findings, we proposed a mechanism for oxidative degradation of DCF by associative oxygenases and FRs.

Photocatalytic and Antimicrobial Properties of Electrospun TiO2-SiO2-Al2O3-ZrO2-CaO-CeO2 Ceramic Membranes

In this study, TiO₂-based ceramic nanofiber membranes in the system of TiO₂-SiO₂-Al₂O₃-ZrO₂-CaO-CeO₂ were synthesized by combining sol-gel and electrospinning processes. In order to investigate the thermal treatment temperature effect, the obtained nanofiber membranes were calcined at different temperatures ranging from 550 to 850 °C. Different characterization methods such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and high-resolution transmission electron microscopy (HR-TEM) were conducted on the obtained membranes to investigate the structural and morphological properties of the nanofibers. The Brunauer-Emmett-Teller surface area of the nanofiber membranes was very high (46.6-149.2 m²/g) and decreased with increasing calcination temperature as expected. Photocatalytic activity investigations were determined using methylene blue (MB) as a model dye under UV and sunlight irradiation. High degradation performances were achieved with the calcination temperatures of 650 and 750 °C because of the high specific surface area and the anatase structure of the nanofiber membranes. Moreover, the ceramic membranes showed antibacterial activity against Escherichia coli as a Gram-negative bacterium and Staphylococcus aureus as a Gram-positive bacterium. The superior properties of the novel TiO₂-based multi-oxide nanofiber membranes proved as a promising candidate for various industries, especially the removal of textile dyes from wastewater.

Surface modification of TiO2 nanoparticles with organic molecules and their biological applications

In recent years, titanium(IV) dioxide nanoparticles (TiO₂NPs) have shown promising potential in various biological applications such as antimicrobials, drug delivery, photodynamic therapy, biosensors, and tissue engineering. For employing TiO₂NPs in these fields, their nanosurface must be coated or conjugated with organic and/or inorganic agents. This modification can improve their stability, photochemical properties, biocompatibility, and even surface area for further conjugation with other molecules such as drugs, targeting molecules, polymers, etc. This review describes the organic-based modification of TiO₂NPs and their potential applications in the mentioned biological fields. In the first part of this review, around 75 recent publications (2017-2022) are mentioned on the common TiO₂NP modifiers including organosilanes, polymers, small molecules, and hydrogels, which improve the photochemical features of TiO₂NPs. In the second part of this review, we presented 149 recent papers (2020-2022) about the use of modified TiO₂NPs in biological applications, in which specific bioactive modifiers are introduced in this part with their advantages. In this review, the following information is presented: (1) the common organic modifiers for TiO₂NPs, (2) biologically important modifiers and their benefits, and (3) recent publications on biological studies on the modified TiO₂NPs with their achievements. This review shows the paramount significance of the organic-based modification of TiO₂NPs to enhance their biological effectiveness, paving the way toward the development of advanced TiO₂-based nanomaterials in nanomedicine.

A sustainable and green chlorophyll/TiO2:W composite supported on recycled plastic bottle caps for the complete removal of Rhodamine B contaminant from drinking water

This investigation reports the photocatalytic performance of the tungsten doped titania (TiO₂:W or TW) with and without coating of chlorophyll (Chl) for the removal of the RhB dye from the drinking water. These particles were also supported on recycled plastic bottle caps (Bcap) to form other photocatalytic composites (TW/Bcap and TW + Chl/Bcap). The SEM images demonstrated that the TW particles without Chl had irregular shapes and sizes of 0.8-12 μm. The TW particles coated by the Chl presented shapes of quasi-rounded grains and smaller particle sizes of 0.8-1.8 μm. The photocatalytyic experiments showed that the photocatalyst powders containing Chl removed completely the RhB dye from the water after 2h under UV-VIS light, while the photocatalyst without Chl removed a maximum of 95% of the RhB. Interestingly, the TW/Bcap and TW + Chl/Bcap composites removed 94-100% of the RhB after 2h. Those ones removed such dye by photocatalysis and by physical adsorption at the same time (as confirmed by the absorbance and FTIR measurements), therefore, the removal of RhB was still very high. Scavenger experiments were also achieved and found that the •OH radicals are the main oxidizing species generated by the photocatalysts with and without Chl. The •O₂^- radicals and holes (h⁺) were the secondary oxidizing species. The presence of the chlorophyll on the photocatalyst increased in general the light absorption and the photocurrent. Overall, our work demonstrated that making composites with recycled plastic bottle caps is a feasible alternative to remove dyes from contaminated drinking water with high efficiency and low cost.

Investigation of the antibacterial and biofilm inhibitory activities ofPrangos acaulis(DC.) Bornm in nanoparticulated formulation

Here in, a chitosan-based nanoformulation ofP.acauliswas evaluated for its antibacterial and antibiofilm inhibitory activities against some known food-borne bacteria. The FTIR, FE-SEM, DLS and zeta-potential analysis were performed for confirming loading process, morphological appearance, hydrodynamic diameter and surface charge of the nanoparticles respectively. The results confirmed that, the nanoparticles had semi-spherical shape with the mean hydrodynamic diameter and surface charge of 89.8 ± 5.8 nm and 10.78 ± 2.7 mv respectively. Furthermore, the FTIR analysis approved that the nanoparticles were successfully loaded with ethyl acetate fraction fromP.acaulis. The antibacterial and biofilm inhibitory activities of the nanoformulated fraction were significantly increased against the tested Gram positive strains than free sample. The results also confirmed that the fraction release from the nanoparticles follows a sustained manner release after 30 h in a logarithmic pattern. Based on the obtained results, chitosan based nanoformulation ofP. acauliscan be considered for more evaluations to serve as an alternative natural antibiotic.

Design, synthesis, and characterization of novel eco-friendly chitosan-AgIO3 bionanocomposite and study its antibacterial activity

This work reports a facile and green approach to preparing AgIO₃ nanoparticles decorated with chitosan (chitosan-AgIO₃). The bionanocomposite was fully characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM) images, energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction analysis (XRD). The antibacterial effect of chitosan-AgIO₃ bionanocomposite was investigated for Pseudomonas aeruginosa, Klebsiella pneumoniae, Staphylococcus saprophyticus, Escherichia coli, and Staphylococcus aureus as pathogen microorganisms via the plate count method, disk diffusion method, and optical density (OD) measurements. The antibacterial performance of the bionanocomposite was compared with two commercial drugs (penicillin and silver sulfadiazine) and in some cases, the synthesized bionanocomposite has a better effect in the eradication of bacteria. The bionanocomposite represented great antibacterial properties. Flow cytometry was performed to investigate the mechanism of bionanocomposite as an antibacterial agent. Reactive oxygen species (ROS) production was responsible for the bactericidal mechanisms. These results demonstrate that the chitosan-AgIO₃ bionanocomposite, as a kind of antibacterial material, got potential for application in a broad range of biomedical applications and water purification. The design and synthesis of green and biodegradable antibacterial materials with simple processes and by using readily available materials cause the final product to be economically affordable and could be scaled in different industries.

Recent advances in biobased and biodegradable polymer nanocomposites, nanoparticles, and natural antioxidants for antibacterial and antioxidant food packaging applications

Inorganic nanoparticles (NPs) and natural antioxidant compounds are an emerging trend in the food industry. Incorporating these substances in biobased and biodegradable matrices as polysaccharides (e.g., starch, cellulose, and chitosan) and proteins has highlighted the potential in active food packaging applications due to more significant antimicrobial, antioxidant, UV blocking, oxygen scavenging, water vapor permeability effects, and low environmental impact. In recent years, the migration of metal NPs and metal oxides in food contact packaging and their toxicological potential have raised concerns about the safety of the nanomaterials. In this review, we provide a comprehensive overview of the main biobased and biodegradable polymer nanocomposites, inorganic NPs, natural antioxidants, and their potential use in active food packaging. The intrinsic properties of NPs and natural antioxidant actives in packaging materials are evaluated to extend shelf-life, safety, and food quality. Toxicological and safety aspects of inorganic NPs are highlighted to understand the current controversy on applying some nanomaterials in food packaging. The synergism of inorganic NPs and plant-derived natural antioxidant actives (e.g., vitamins, polyphenols, and carotenoids) and essential oils (EOs) potentiated the antibacterial and antioxidant properties of biodegradable nanocomposite films. Biodegradable packaging films based on green NPs-this is biosynthesized from plant extracts-showed suitable mechanical and barrier properties and had a lower environmental impact and offered efficient food protection. Furthermore, AgNPs and TiO₂ NPs released metal ions from packaging into contents insufficiently to cause harm to human cells, which could be helpful to understanding critical gaps and provide progress in the packaging field.

Facile fabrication of highly dispersed Pd catalyst on nanoporous chitosan and its application in environmental catalysis

With the development of society, the problem of environmental pollution is becoming increasingly serious, such as the typical pollution of nitro compounds or dyes in wastewater. An effective strategy to remove these organic pollutants is catalytic conversion, including converting them into more chemically valuable compounds. Herein, a nanoporous chitosan microsphere derived from seafood waste resources of chitin was constructed via sol-gel method, which was used as supports to successfully fabricate a highly dispersed Pd nano-catalyst (mean diameter ~ 1.8 nm) via a facile way based on its interconnected nanoporous structure and rich functional -OH/-NH₂ groups. The synthetic catalyst was applied to the hydrogenation of toxic nitro compounds, which could efficiently and selectively catalyze the conversion of nitro compounds. The catalyst was also used for the degradation of some representative dyes, which also showed good activity and stability, suggesting potential of applications in green environmental governance.

Silver Nanoparticle-Loaded Gelatin-Based Nanocomposite Films toward Enhanced Mechanical Properties and Antibacterial Activity

Gelatin (GH) is a natural polymer material with unique physical, chemical, and biological properties that render it a good base material for biomedical material production. Herein, Ag nanoparticles (NPs) were loaded onto a waterborne polyurethane-GH composite (WPU-g-GH) to prepare a GH-based nanocomposite (AgNP/WPU-g-GH) films). The prepared nanocomposite films were characterized using several analyses including Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray diffraction, transmission emission microscopy, mechanical strength tests, and other analyses. The results demonstrated that the nanocomposite films had high mechanical strength, good thermal stability, and controllable biodegradability. In particular, when the AgNP loading content was 0.03%, the tensile strength, elongation at break, and average particle size of the nanocomposite film reached 45.13 MPa, 476.04%, and 13.02978 ± 1.64406 nm, respectively. Disk diffusion and cytotoxicity analyses revealed that the nanocomposite films exhibited significant antibacterial activity against Gram-negative and Gram-positive bacteria without affecting the cell viability of fibroblasts. These findings indicate that the nanocomposite films with high mechanical strength and antibacterial activity could be used for wound management, tissue adhesion, and biomaterial surface coating.

Facile fabrication of ternary MWCNTs/ZnO/Chitosan nanocomposite for enhanced photocatalytic degradation of methylene blue and antibacterial activity

Developing a cheap, stable and effective photocatalyst is necessary for remediation of persistent organic pollutants. To address this challenge, we proposed a unique interfacial engineering technique and proper bandgap matching strategy to synthesize MWCNTs/ZnO/Chitosan ternary nanocomposite for effective photocatalytic application. The features of the prepared samples were determined by FESEM, TEM, EDX, elemental mapping, AFM, FT-IR, XRD, UV–Vis spectroscopy and BET surface analysis. The obtained results showed successful fabrication of synthesized nanocomposites with enhanced surface area. Degradation effect of nanostructures on methylene blue (MB) and antibacterial activity against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Bacillus subtilis (B. subtilis) pathogenic strains were investigated. The proposed photocatalytic mechanism illustrated the electron transfer facilitated by MWCNTs/ZnO/Chitosan structure which results in spatial separation of electron–hole pairs. Compared with ZnO and ZnO/Chitosan, the prepared MWCNTs/ZnO/Chitosan ternary nanocomposite showed high usage of UV illumination and superior separation of photogenerated electron–hole pairs. MWCNTs/ZnO/Chitosan illustrated 86.26% adsorption rate and outstanding increased photocatalytic activity on MB degradation efficiency of 98.76% after 20 min. Stability of photocatalyst reached from 98.76% initial decolorization to 85% at the fourth cycle. In addition, the ternary nanocomposite also exhibited remarkable bactericidal activity against gram-positive (S. aureus) and (B. subtilis) and gram-negative (E. coli) bacteria strains. Due to the obtained results, the prepared nanocomposite would be an efficient candidate photocatalyst with antibacterial properties.

Antibacterial, antifungal, antiviral, and photocatalytic activities of TiO2 nanoparticles, nanocomposites, and bio-nanocomposites: Recent advances and challenges

The applications of nanomaterials specifically metal and metal nanoparticles in various medical and industrial fields have been due to their unique properties compared to bulk materials. A combination of pharmacology and nanotechnology has helped the production of novel antimicrobial agents to control resistant microorganisms of bacteria and fungi. The properties of metal nanoparticles and metal oxides such as titanium dioxide (TiO2), zinc oxide (ZnO), silver (Ag), and copper (Cu) are well known as efficient antimicrobial agents. In particular, TiO2 nanoparticles have been considered as an attractive antimicrobial compound due to their photocatalytic intrinsic and their stable, non-toxic, inexpensive, and safe physicochemical properties. Therefore, in this review, recent advances and challenges of antibacterial, antifungal, antiviral, and photocatalytic activities of TiO2 nanoparticles, nanocomposites, and bio-nanocomposites are presented to help future studies.

High antibacterial activity of chitosan films with covalent organic frameworks immobilized silver nanoparticles

In this study, chitosan (CS) film containing covalent organic frameworks (COFs) immobilized silver nanoparticles (AgNPs) were developed for food packaging with improved antibacterial activities and film properties. COFs-AgNPs were fabricated via in-situ synthesis of immobilizing AgNPs on COFs. Transmission electron microscope, Zeta potential, X-ray diffraction, element mapping and Fourier transform infrared spectroscopy confirmed the successful fabrication of COFs-AgNPs, and COFs-AgNPs showed superior antibacterial activity against S. aureus and E. coli. Furthermore, the as-prepared COFs-AgNPs composite was further used to fabricate CS composite films (CS/COFs-AgNPs) by a solution casting method. The findings showed that the tensile strength of the nanocomposite films enhanced dramatically with the increase of the COFs-AgNPs content, while the UV-visible light barrier property, water swelling and solubility properties, and water vapor permeability (WVP) decreased significantly. Not only that, the CS/COFs-AgNPs nanocomposite films also showed outstanding antibacterial activity and effectively prolonged the storage time of white crucian carp (Carassius auratus). As a result, CS/COFs-AgNPs nanocomposite films show great potential in active food packaging.

Recent progress in green and biopolymer based photocatalysts for the abatement of aquatic pollutants

Enormous research studies on the abatement of anthropogenic aquatic pollutants including organic dyes, pesticides, cosmetics, antibiotics and inorganic species by using varieties of semiconductor photocatalysts have been reported in recent decades. Besides, many of these photocatalysts suffer in real applications owing to their high production cost and low stability. In many cases, the photocatalysts themselves are being considered as secondary pollutants. To eliminate these drawbacks, the green synthesized photocatalysts and the use of biopolymers as photocatalyst supports are considered in recent years. In this context, recent developments in green synthesized metals, metal oxides, other metal compounds, and carbon based photocatalysts in water purification are critically reviewed. Furthermore, the pivotal role of biopolymers including chitin, chitosan, cellulose, natural gum, hydroxyapatite, alginate in photocatalytic removal of aquatic pollutants is comprehensively reviewed. The presence of functional groups, electron trapping ability, biocompatibility, natural occurrence, and low production cost are the major reasons for using biopolymers in photocatalysis. Finally, the summary and conclusion are presented along with existing challenges in this research area.

Antifungal Effect of Chitosan/Nano-TiO2 Composite Coatings against Colletotrichum gloeosporioides, Cladosporium oxysporum and Penicillium steckii

Postharvest pathogens such as C. gloeosporioides (MA), C.oxysporum (ME) and P. steckii (MF) are the causal agents of disease in mangoes. This paper presents an in vitro investigation into the antifungal effect of a chitosan (CTS)/nano-titanium dioxide (TiO₂) composite coating against MA, ME and MF. The results indicated that, the rates of MA, ME and MF mortality following the single chitosan treatment were 63.3%, 84.8% and 43.5%, respectively, while the rates of mycelial inhibition were 84.0%, 100% and 25.8%, respectively. However, following the addition of 0.5% nano-TiO₂ into the CTS, both the mortality and mycelial inhibition rates for MA and ME reached 100%, and the mortality and mycelial inhibition rate for MF also increased significantly, reaching 75.4% and 57.3%, respectively. In the MA, the dry weight of mycelia after the CTS/0.5% nano-TiO₂ treatment decreased by 36.3% in comparison with the untreated group, while the conductivity value was about 1.7 times that of the untreated group, and the protein dissolution rate and extravasation degree of nucleic acids also increased significantly. Thus, this research revealed the potential of CTS/nano-TiO₂ composite coatings in the development of new antimicrobial materials.

Bifunctional PVA/ZnO/AgI/Chlorophyll Nanocomposite Film: Enhanced Photocatalytic Activity for Degradation of Pollutants and Antimicrobial Property under Visible-Light Irradiation

Here, poly(vinyl alcohol) (PVA) with numerous hydroxyl groups has been applied as a suitable substrate for efficient formation of zinc oxide (ZnO) nanoparticles with a flower shape (confirmed by electron-scanning microscopy), silver iodide (AgI) nanoparticles, and chlorophyll (Chl), as a natural-based photocatalyst (PVA/ZnO/AgI/Chl). First, an efficient preparation route for the PVA/ZnO/AgI/Chl nanophotocatalyst is presented starting from the extraction of Chl from fresh spinach. Then, the catalytic role of the prepared composite is precisely investigated in degradation of methylene blue (MB). The effects of visible-light irradiation, different contact times, and the employed ingredients on the architecture of the PVA/ZnO/AgI/Chl are screened in the degradation process of MB. It is demonstrated that the best result (MB removal efficiency ca. 95.5%) is achieved by applying the visible-light irradiation using a LED lamp (70 W, λ = 425 nm) for a 60 min duration. Moreover, the photocatalytic performance of PVA/ZnO/AgI/Chl has been further confirmed by degradation of Congo red (CR) (ca. 92%, in 150 min) and 4-chlorophenol (4-CP) (88%, in 270 min), as well. As another function of the prepared PVA/ZnO/AgI/Chl composite, a substantial antibacterial property against human bacterial pathogens such as Staphylococcus aureus and Escherichia coli as Gram-positive and Gram-negative bacteria has been noticed, studied by agar diffusion cup plate and colony methods. The zones of inhibition have been evaluated ca. 20 and 12 mm for the S. aureus and E. coli cell lines, respectively. Finally, a great synergy between the prepared composite and the visible light has been observed through the examination of the live bacteria: 99.6% for S. aureus and 99.8% for E. coli in the presence of visible light, after the subjection of PVA/ZnO/AgI/Chl particles to the bacteria, verified by the colony counter method.

Alloy-Electrode-Assisted High-Performance Enhancement-Type Neodymium-Doped Indium-Zinc-Oxide Thin-Film Transistors on Polyimide Flexible Substrate

Flexible thin-film transistors with high current-driven capability are of great significance for the next-generation new display technology. The effect of a Cu-Cr-Zr (CCZ) copper alloy source/drain (S/D) electrode on flexible amorphous neodymium-doped indium-zinc-oxide thin-film transistors (NdIZO-TFTs) was investigated. Compared with pure copper (Cu) and aluminum (Al) S/D electrodes, the CCZ S/D electrode changes the TFT working mode from depletion mode to enhancement mode, which is ascribed to the alloy-assisted interface layer besides work function matching. X-ray photoelectron spectroscopy (XPS) depth profile analysis was conducted to examine the chemical states of the contact interface, and the result suggested that chromium (Cr) oxide and zirconium (Zr) oxide aggregate at the interface between the S/D electrode and the active layer, acting as a potential barrier against residual free electron carriers. The optimal NdIZO-TFT exhibited a desired performance with a saturation mobility (μ_sat) of 40.3 cm²·V⁻¹·s⁻¹, an I_on/I_off ratio of 1.24 × 10⁸, a subthreshold swing (SS) value of 0.12 V·decade⁻¹, and a threshold voltage (V_th) of 0.83 V. This work is anticipated to provide a novel approach to the realization of high-performance flexible NdIZO-TFTs working in enhancement mode.