Global response of Acidithiobacillus ferrooxidans ATCC 53993 to high concentrations of copper: A quantitative proteomics approach

Potential applications of extremophilic bacteria in the bioremediation of extreme environments contaminated with heavy metals

Protecting the environment from harmful pollutants has become increasingly difficult in recent decades. The presence of heavy metal (HM) pollution poses a serious environmental hazard that requires intricate attention on a worldwide scale. Even at low concentrations, HMs have the potential to induce deleterious health effects in both humans and other living organisms. Therefore, various strategies have been proposed to address this issue, with extremophiles being a promising solution. Bacteria that exhibit resistance to metals are preferred for applications involving metal removal due to their capacity for rapid multiplication and growth. Extremophiles are a special group of microorganisms that are capable of surviving under extreme conditions such as extreme temperatures, pH levels, and high salt concentrations where other organisms cannot. Due to their unique enzymes and adaptive capabilities, extremophiles are well suited as catalysts for environmental biotechnology applications, including the bioremediation of HMs through various strategies. The mechanisms of resistance to HMs by extremophilic bacteria encompass: (i) metal exclusion by permeability barrier; (ii) extracellular metal sequestration by protein/chelator binding; (iii) intracellular sequestration of the metal by protein/chelator binding; (iv) enzymatic detoxification of a metal to a less toxic form; (v) active transport of HMs; (vi) passive tolerance; (vii) reduced metal sensitivity of cellular targets to metal ions; and (viii) morphological change of cells. This review provides comprehensive information on extremophilic bacteria and their potential roles for bioremediation, particularly in environments contaminated with HMs, which pose a threat due to their stability and persistence. Genetic engineering of extremophilic bacteria in stressed environments could help in the bioremediation of contaminated sites. Due to their unique characteristics, these organisms and their enzymes are expected to bridge the gap between biological and chemical industrial processes. However, the structure and biochemical properties of extremophilic bacteria, along with any possible long-term effects of their applications, need to be investigated further.

Cloning, expression, and bioinformatics analysis of heavy metal resistance-related genes fd-I and fd-II from Acidithiobacillus ferrooxidans

Five heavy metals were introduced into the bacterial heavy metal resistance tests. The results showed that apparent inhibition effects of Cd2+ and Cu2+ on the growth of Acidithiobacillus ferrooxidans BYSW1 occurred at high concentrations (>0.04 mol l-1). Significant differences (P < 0.001) were both noticed in the expression of two ferredoxin-encoding genes (fd-I and fd-II) related to heavy metal resistance in the presence of Cd2+ and Cu2+ . When exposed to 0.06 mol l-1 Cd2+, the relative expression levels of fd-I and fd-II were about 11 and 13 times as much as those of the control, respectively. Similarly, exposure to 0.04 mol l-1 Cu2+ caused approximate 8 and 4 times higher than those of the control, respectively. These two genes were cloned and expressed in Escherichia coli, and the structures, functions of two corresponding target proteins, i.e. Ferredoxin-I (Fd-I) and Ferredoxin-II (Fd-II), were predicted. The recombinant cells inserted by fd-I or fd-II were more resistant to Cd2+ and Cu2+ compared with wild-type cells. This study was the first investigation regarding the contribution of fd-I and fd-II to enhancing heavy metal resistance of this bioleaching bacterium, and laid a foundation for further elucidation of heavy metal resistance mechanisms caused by Fd.

Molecular Insights into a Novel Cu(I)-Sensitive ArsR/SmtB Family Repressor in Extremophile Acidithiobacillus caldus

Acidithiobacillus caldus is a common bioleaching bacterium that is inevitably exposed to extreme copper stress in leachates. The ArsR/SmtB family of metalloregulatory repressors regulates homeostasis and resistance in bacteria by specifically responding to metals. Here, we characterized A. caldus Cu(I)-sensitive repressor (AcsR) and gained molecular insights into this new member of the ArsR/SmtB family. Transcriptional analysis indicated that the promoter (PIII) of acsR was highly active in Escherichia coli but inhibited upon AcsR binding to the PIII-acsR region. Size exclusion chromatography and circular dichroism spectra revealed that Cu^I-AcsR shared an identical assembly state with apo-AcsR, as a dimer with fewer α helices, more extended strands, and more β turns. Mutation of the cysteine site in AcsR did not affect its assembly state. Copper(I) titrations revealed that apo-AcsR bound two Cu(I) molecules per monomer in vitro with an average dissociation constant (K_D) for bicinchoninic acid competition of 2.55 × 10^-9 M. Site-directed mutation of putative Cu(I)-binding ligands in AcsR showed that replacing Cys64 with Ala reduces copper binding ability from two Cu(I) molecules per monomer to one, with an average K_D of 6.05 × 10^-9 M. Electrophoretic mobility shift assays revealed that apo-AcsR has high affinity for the 12-2-12 imperfect inverted repeats P2245 and P2270 in the acsR gene cluster and that Cu-loaded AcsR had lower affinity for DNA fragments than apo-AcsR. We developed a hypothetical working model of AcsR to better understand Cu resistance mechanisms in A. caldus. IMPORTANCE Copper (Cu) resistance among various microorganisms is attracting interest. The chemolithoautotrophic bacterium A. caldus, which can tolerate extreme copper stress (≥10 g/L Cu ions), is typically used to bioleach chalcopyrite (CuFeS₂). Understanding of Cu resistance in A. caldus is limited due to scant investigation and the absence of efficient gene manipulation tools. Here, we characterized a new member of the ArsR/SmtB family of prokaryotic metalloregulatory transcriptional proteins that repress operons linked to stress-inducing concentrations of heavy metal ions. This protein can bind two Cu(I) molecules per monomer and negatively regulate its gene cluster. Members of the ArsR/SmtB family have not been investigated in A. caldus until now. The discovery of this novel protein enriches understanding of Cu homeostasis in A. caldus.

Characterization and genomic analysis of two novel psychrotolerant Acidithiobacillus ferrooxidans strains from polar and subpolar environments

The bioleaching process is carried out by aerobic acidophilic iron-oxidizing bacteria that are mainly mesophilic or moderately thermophilic. However, many mining sites are located in areas where the mean temperature is lower than the optimal growth temperature of these microorganisms. In this work, we report the obtaining and characterization of two psychrotolerant bioleaching bacterial strains from low-temperature sites that included an abandoned mine site in Chilean Patagonia (PG05) and an acid rock drainage in Marian Cove, King George Island in Antarctic (MC2.2). The PG05 and MC2.2 strains showed significant iron-oxidation activity and grew optimally at 20°C. Genome sequence analyses showed chromosomes of 2.76 and 2.84 Mbp for PG05 and MC2.2, respectively, and an average nucleotide identity estimation indicated that both strains clustered with the acidophilic iron-oxidizing bacterium Acidithiobacillus ferrooxidans. The Patagonian PG05 strain had a high content of genes coding for tolerance to metals such as lead, zinc, and copper. Concordantly, electron microscopy revealed the intracellular presence of polyphosphate-like granules, likely involved in tolerance to metals and other stress conditions. The Antarctic MC2.2 strain showed a high dosage of genes for mercury resistance and low temperature adaptation. This report of cold-adapted cultures of the At. ferrooxidans species opens novel perspectives to satisfy the current challenges of the metal bioleaching industry.

Bioleaching of Heavy Metals from Printed Circuit Boards with an Acidophilic Iron-Oxidizing Microbial Consortium in Stirred Tank Reactors

In this study, bioleaching was carried out for the recovery of metals (copper, zinc, tin, lead, gold and silver) from printed circuit boards residues (PCBs), one of the most important wastes from electrical and electronic equipment, using an acidophilic iron-oxidizing bacterial consortium enriched with minerals from a gold mine in the Arequipa region, Peru. High-throughput sequencing and analysis of the 16S rRNA biomarker revealed that this consortium was predominantly composed of Tissierella, Acidiphilium and Leptospirillum bacteria, from which the latter is known to grow by chemolithotrophy through iron oxidation. After the enrichment process, the acidophilic iron-oxidizing consortium was first tested for its tolerance to different PCBs concentrations, showing best growth up to 10 g/L of PCBs and a tolerance index of 0.383. Based on these results, the bioleaching efficiency of the consortium was investigated for 10 g/L of PCBs in stirred tank reactors coupled to an aeration system, for 18 days. High bioleaching efficiencies were achieved for copper and zinc (69% and 91%, respectively), indicating that these two metals can be easily extracted in this leaching system. Lower extraction efficiencies were achieved for tin (16%) and gold (28%), while for lead and silver only a residual recovery (<0.25%) was detected. These results indicate that the enriched bacterial consortium originating from the Arequipa region, Peru, has a high capacity to recover different metals of economic importance.

Recent progress in the application of omics technologies in the study of bio-mining microorganisms from extreme environments

Bio-mining microorganisms are a key factor affecting the metal recovery rate of bio-leaching, which inevitably produces an extremely acidic environment. As a powerful tool for exploring the adaptive mechanisms of microorganisms in extreme environments, omics technologies can greatly aid our understanding of bio-mining microorganisms and their communities on the gene, mRNA, and protein levels. These omics technologies have their own advantages in exploring microbial diversity, adaptive evolution, changes in metabolic characteristics, and resistance mechanisms of single strains or their communities to extreme environments. These technologies can also be used to discover potential new genes, enzymes, metabolites, metabolic pathways, and species. In addition, integrated multi-omics analysis can link information at different biomolecular levels, thereby obtaining more accurate and complete global adaptation mechanisms of bio-mining microorganisms. This review introduces the current status and future trends in the application of omics technologies in the study of bio-mining microorganisms and their communities in extreme environments.

Molecular Insights into the Copper-Sensitive Operon Repressor in Acidithiobacillus caldus

The copper-sensitive operon repressor (CsoR) family, which is the main Cu(I)-sensing family, is widely distributed and regulates regulons involved in detoxification in response to extreme copper stress (a general range of ≥3 g/liter copper ions). Here, we identified CsoR in hyper-copper-resistant Acidithiobacillus caldus (CsoR^Ac), an organism used in the bioleaching process of copper ores. CsoR^Ac possesses highly conserved Cu(I) ligands and structures within the CsoR family members. Transcriptional analysis assays indicated that the promoter (PIII) of csoR was active but weakly responsive to copper in Escherichia coli. Copper titration assays gave a stoichiometry of 0.8 mol Cu(I) per apo-CsoR^Ac monomer in vitro combined with atomic absorption spectroscopy analysis. Cu^I-CsoR^Ac and apo-CsoR^Ac share essentially identical secondary structures and assembly states, as demonstrated by circular dichroism spectra and size exclusion chromatography profiles. The average dissociation constants (K_D = 2.26 × 10^-18 M and 0.53 × 10^-15 M) and Cu(I) binding affinity of apo-CsoR^Ac were estimated by bathocuproine disulfonate (BCS) and bicinchoninic acid (BCA) competition assays, respectively. Site-directed mutations of conserved Cu(I) ligands in CsoR^Ac did not significantly alter the secondary structure or assembly state. Competition assays showed that mutants had the same order of magnitude of Cu(I) binding affinity as apo-CsoR^Ac. Moreover, apo-CsoR^Ac could bind to the DNA fragment P08430 in vitro, although with low affinity. Finally, a working model was developed to illustrate putative copper resistance mechanisms in A. caldus. IMPORTANCE Research on copper resistance among various species has attracted considerable interest. However, due to the lack of effective and reproducible genetic tools, few studies regarding copper resistance have been reported for A. caldus. Here, we characterized a major Cu(I)-sensing family protein, CsoR^Ac, which binds Cu(I) with an attomolar affinity higher than that of the Cu(I)-specific chelator bathocuproine disulfonate. In particular, CsoR family proteins were identified only in A. caldus, rather than A. ferrooxidans and A. thiooxidans, which are both used for bioleaching. Meanwhile, A. caldus harbored more copper resistance determinants and a relatively full-scale regulatory system involved in copper homeostasis. These observations suggested that A. caldus may play an essential role in the application of engineered strains with higher copper resistance in the near future.

Determinants of Copper Resistance in Acidithiobacillus Ferrivorans ACH Isolated from the Chilean Altiplano

The use of microorganisms in mining processes is a technology widely employed around the world. Leaching bacteria are characterized by having resistance mechanisms for several metals found in their acidic environments, some of which have been partially described in the Acidithiobacillus genus (mainly on ferrooxidans species). However, the response to copper has not been studied in the psychrotolerant Acidithiobacillus ferrivorans strains. Therefore, we propose to elucidate the response mechanisms of A. ferrivorans ACH to high copper concentrations (0-800 mM), describing its genetic repertoire and transcriptional regulation. Our results show that A. ferrivorans ACH can grow in up to 400 mM of copper. Moreover, we found the presence of several copper-related makers, belonging to cop and cus systems, as well as rusticyanins and periplasmatic acop protein in the genome. Interestingly, the ACH strain is the only one in which we find three copies of copB and copZ genes. Moreover, transcriptional expression showed an up-regulation response (acop, copZ, cusA, rusA, and rusB) to high copper concentrations. Finally, our results support the important role of these genes in A. ferrivorans copper stress resistance, promoting the use of the ACH strain in industrial leaching under low temperatures, which could decrease the activation times of oxidation processes and the energy costs.

High copper concentration reduces biofilm formation in Acidithiobacillus ferrooxidans by decreasing production of extracellular polymeric substances and its adherence to elemental sulfur

Acidithiobacillus ferrooxidans is an acidophilic bacterium able to grow in environments with high concentrations of metals. It is a chemolithoautotroph able to form biofilms on the surface of solid minerals to obtain its energy. The response of both planktonic and sessile cells of A. ferrooxidans ATCC 23270 grown in elemental sulfur and adapted to high copper concentration was analyzed by quantitative proteomics. It was found that 137 proteins varied their abundance when comparing both lifestyles. Copper effllux proteins, some subunits of the ATP synthase complex, porins, and proteins involved in cell wall modification increased their abundance in copper-adapted sessile lifestyle cells. On the other hand, planktonic copper-adapted cells showed increased levels of proteins such as: cupreredoxins involved in copper cell sequestration, some proteins related to sulfur metabolism, those involved in biosynthesis and transport of lipopolysaccharides, and in assembly of type IV pili. During copper adaptation a decreased formation of biofilms was measured as determined by epifluorescence microscopy. This was apparently due not only to a diminished number of sessile cells but also to their exopolysaccharides production. This is the first study showing that copper, a prevalent metal in biomining environments causes dispersion of A. ferrooxidans biofilms. SIGNIFICANCE: Copper is a metal frequently found in high concentrations at mining environments inhabitated by acidophilic microorganisms. Copper resistance determinants of A. ferrooxidans have been previously studied in planktonic cells. Although biofilms are recurrent in these types of environments, the effect of copper on their formation has not been studied so far. The results obtained indicate that high concentrations of copper reduce the capacity of A. ferrooxidans ATCC 23270 to form biofilms on sulfur. These findings may be relevant to consider for a bacterium widely used in copper bioleaching processes.

Metabolic transcriptional analysis on copper tolerance in moderate thermophilic bioleaching microorganism Acidithiobacillus caldus

Bioleaching, an alternative environmental smelting technology, typically uses high concentrations of heavy metal ions, especially in the subsequent phase, due to metal ion accumulation from the mineral. In this study, we analyzed the overall response of the bioleaching microorganism Acidithiobacillus caldus to copper stress through physiological and transcriptomic analyses. Scanning electron microscopy results showed higher extracellular polymeric substances secretion and cell aggregation under copper stress. Intracellular levels of glutamic acid, glycine and cysteine increased, favoring the synthesis of glutathione for maintenance of the oxidation-reduction state. GSH, during copper stress conditions, the activity of GSH-PX and CAT increased, resulting in reduced oxidative damage while maintaining stable intracellular pH. Higher unsaturated and cyclopropane fatty acid levels resulted in increased membrane fluidity and compactness and decreased ATP levels to support the energy requirements for stress resistance. Initially, H⁺-ATPase activity increased to provide energy for proton output and decreased later at higher copper ion stress. From transcriptome analysis, 140 genes were differentially expressed under low copper stress (1 g/L), while 250 genes exhibited altered transcriptional levels at higher copper stress (3 g/L). These differentially expressed genes were involved primarily in metabolic pathways such as energy metabolism, two-component systems, amino acid metabolism, and signal transduction. The Sox family cluster gene cluster involved in the conversion of thiosulfate to sulfate was upregulated in the sulfur metabolism pathway. In the oxidative phosphorylation pathway, genes participating in the synthesis of NADH oxidoreductase and cytochrome c oxidase, nuoL, cyoABD (cyoA, cyoB and cyoD) and cydAB (cydA and cydB), were downregulated. The TCS element ompR, closely associated with the osmotic pressure, exhibited active response, while Cu²⁺ efflux system gene cusRS was upregulated. In the amino acid metabolism, the glnA involved in nitrogen fixation was upregulated and promoted the synthesis of glutamine synthetase for reducing excessive oxidative stress. This study provides new insights into the mechanism underlying A. caldus response to heavy-metal ion stress under harsh bioleaching conditions.

Analysis of copper response inAcinetobactersp. by comparative proteomics

Metal contamination exerts environmental pressure on several lifeforms.

Possible Role of Envelope Components in the Extreme Copper Resistance of the Biomining Acidithiobacillus ferrooxidans

Acidithiobacillus ferrooxidans resists extremely high concentrations of copper. Strain ATCC 53993 is much more resistant to the metal compared with strain ATCC 23270, possibly due to the presence of a genomic island in the former one. The global response of strain ATCC 53993 to copper was analyzed using iTRAQ (isobaric tag for relative and absolute quantitation) quantitative proteomics. Sixty-seven proteins changed their levels of synthesis in the presence of the metal. On addition of CusCBA efflux system proteins, increased levels of other envelope proteins, such as a putative periplasmic glucan biosynthesis protein (MdoG) involved in the osmoregulated synthesis of glucans and a putative antigen O polymerase (Wzy), were seen in the presence of copper. The expression of A. ferrooxidansmdoG or wzy genes in a copper sensitive Escherichia coli conferred it a higher metal resistance, suggesting the possible role of these components in copper resistance of A. ferrooxidans. Transcriptional levels of genes wzy, rfaE and wzz also increased in strain ATCC 23270 grown in the presence of copper, but not in strain ATCC 53993. Additionally, in the absence of this metal, lipopolysaccharide (LPS) amounts were 3-fold higher in A. ferrooxidans ATCC 53993 compared with strain 23270. Nevertheless, both strains grown in the presence of copper contained similar LPS quantities, suggesting that strain 23270 synthesizes higher amounts of LPS to resist the metal. On the other hand, several porins diminished their levels in the presence of copper. The data presented here point to an essential role for several envelope components in the extreme copper resistance by this industrially important acidophilic bacterium.

Extremophilic Microfactories: Applications in Metal and Radionuclide Bioremediation

Metals and radionuclides (M&Rs) are a worldwide concern claiming for resilient, efficient, and sustainable clean-up measures aligned with environmental protection goals and global change constraints. The unique defense mechanisms of extremophilic bacteria and archaea have been proving usefulness towards M&Rs bioremediation. Hence, extremophiles can be viewed as microfactories capable of providing specific and controlled services (i.e., genetic/metabolic mechanisms) and/or products (e.g., biomolecules) for that purpose. However, the natural physiological plasticity of such extremophilic microfactories can be further explored to nourish different hallmarks of M&R bioremediation, which are scantly approached in the literature and were never integrated. Therefore, this review not only briefly describes major valuable extremophilic pathways for M&R bioremediation, as it highlights the advances, challenges and gaps from the interplay of ‘omics’ and biological engineering to improve extremophilic microfactories performance for M&R clean-up. Microfactories’ potentialities are also envisaged to close the M&R bioremediation processes and shift the classical idea of never ‘getting rid’ of M&Rs into making them ‘the belle of the ball’ through bio-recycling and bio-recovering techniques.

Acidithiobacillus ferrooxidans and its potential application

The widely distributed Acidithiobacillus ferrooxidans (A. ferrooxidans) lives in extremely acidic conditions by fixing CO₂ and nitrogen, and by obtaining energy from Fe²⁺ oxidation with either downhill or uphill electron transfer pathway and from reduced sulfur oxidation. A. ferrooxidans exists as different genomovars and its genome size is 2.89-4.18 Mb. The chemotactic movement of A. ferrooxidans is regulated by quorum sensing. A. ferrooxidans shows weak magnetotaxis due to formation of 15-70 nm magnetite magnetosomes with surface functional groups. The room- and low-temperature magnetic features of A. ferrooxidans are different from other magnetotactic bacteria. A. ferrooxidans has potential for removing sulfur from solids and gases, metals recycling from metal-bearing ores, electric wastes and sludge, biochemical production synthesizing, and metal workpiece machining.

Global effect of the lack of inorganic polyphosphate in the extremophilic archaeon Sulfolobus solfataricus: A proteomic approach

Inorganic polyphosphates (polyP) are present in all living cells and several important functions have been described for them. They are involved in the response to stress conditions, such as nutrient depletion, oxidative stress and toxic metals amongst others. A recombinant strain of Sulfolobus solfataricus unable to accumulate polyP was designed by the overexpression of its endogenous ppx gene. The overall impact of the lack of polyP on this S. solfataricus polyP (-) strain was analyzed by using quantitative proteomics (isotope-coded protein label, ICPL). Stress-related proteins, such as peroxiredoxins and heat shock proteins, proteins involved in metabolism and several others were produced at higher levels in the ppx expression strain. The polyP deficient strain showed an increased copper sensitivity and an earlier transcriptional up-regulation of copA gene coding for the P-type copper-exporting ATPase. This implies a complementary function of both copper resistance systems. These results strongly suggests that the lack of polyP makes this hyperthermophilic archaeon more sensitive to toxic conditions, such as an exposure to metals or other harmful stimuli, emphasizing the importance of this inorganic phosphate polymers in the adaptations to live in the environmental conditions in which thermoacidophilic archaea thrive. SIGNIFICANCE: Inorganic polyphosphate (polyP) are ubiquitous molecules with many functions in living organisms. Few studies related to these polymers have been made in archaea. The construction of a polyP deficient recombinant strain of Sulfolobus solfataricus allowed the study of the global changes in the proteome of this thermoacidophilic archaeon in the absence of polyP compared with the wild type strain. The results obtained using quantitative proteomics suggest an important participation of polyP in the oxidative stress response of the cells and as having a possible metabolic role in the cell, as previously described in bacteria. The polyP deficient strain also showed an increased copper sensitivity and an earlier transcriptional up-regulation of copA, implying a complementary role of both copper resistance systems.

Phosphate Favors the Biosynthesis of CdS Quantum Dots in Acidithiobacillus thiooxidans ATCC 19703 by Improving Metal Uptake and Tolerance

Recently, we reported the production of Cadmium sulfide (CdS) fluorescent semiconductor nanoparticles (quantum dots, QDs) by acidophilic bacteria of the Acidithiobacillus genus. Here, we report that the addition of inorganic phosphate to Acidithiobacillus thiooxidans ATCC 19703 cultures favors the biosynthesis of CdS QDs at acidic conditions (pH 3.5). The effect of pH, phosphate and cadmium concentrations on QDs biosynthesis was studied by using Response Surface Methodology (RSM), a multivariate technique for analytical optimization scarcely used in microbiological studies to date. To address how phosphate affects intracellular biosynthesis of CdS QDs, the effect of inorganic phosphate on bacterial cadmium-uptake was evaluated. By measuring intracellular levels of cadmium we determined that phosphate influences the capacity of cells to incorporate this metal. A relation between cadmium tolerance and phosphate concentrations was also determined, suggesting that phosphate participates in the adaptation of bacteria to toxic levels of this metal. In addition, QDs-biosynthesis was also favored by the degradation of intracellular polyphosphates. Altogether, our results indicate that phosphate contributes to A. thiooxidans CdS QDs biosynthesis by influencing cadmium uptake and cadmium tolerance. These QDs may also be acting as a nucleation point for QDs formation at acidic pH. This is the first study reporting the effect of phosphates on QDs biosynthesis and describes a new cadmium-response pathway present in A. thiooxidans and most probably in other bacterial species.

Characterization of Rhodococcus sp. A5wh isolated from a high altitude Andean lake to unravel the survival strategy under lithium stress

Lithium (Li) is widely distributed in nature and has several industrial applications. The largest reserves of Li (over 85%) are in the so-called "triangle of lithium" that includes the Salar de Atacama in Chile, Salar de Uyuni in Bolivia and Salar del Hombre Muerto in Argentina. Recently, the use of microorganisms in metal recovery such as copper has increased; however, there is little information about the recovery of lithium. The strain Rhodococcus sp. A5_wh used in this work was previously isolated from Laguna Azul. The assays revealed that this strain was able to accumulate Li (39.52% of Li/g microbial cells in 180min) and that it was able to grow in its presence up to 1M. In order to understand the mechanisms implicated in Li tolerance, a proteomic approach was conducted. Comparative proteomic analyses of strain A5_wh exposed and unexposed to Li reveal that 17 spots were differentially expressed. The identification of proteins was performed by MALDI-TOF/MS, and the obtained results showed that proteins involved in stress response, transcription, translations, and metabolism were expressed under Li stress. This knowledge constitutes the first proteomic approach to elucidate the strategy followed by Rhodococcus to adapt to Li.

Valorization of Phosphorus Secondary Raw Materials by Acidithiobacillus ferrooxidans

This paper presents the possibility of producing phosphorus fertilizers through Acidithiobacillus ferrooxidans utilization in secondary raw materials solubilization. Phosphorus was obtained from the bones of poultry and fish as well as from Morocco phosphorite. Four doses of poultry bones and fish bones were used in the experiment (2, 4, 10 and 20 g/L) and two doses (2 and 4 g/L) of phosphorite were also used. The experimenters measured the final pH, which increased in proportion to the increase in the number of poultry bone doses, whereas in the case of fish bones it decreased in proportion to the increase in the number of fish bone doses. Only in the case of phosphorite, where 10 g/L were used, there was a slight increase in pH during solubilization observed. The highest phosphorus concentration of 1.9% (expressed as P₂O₅) was found for the solubilization performed on fish bones with the highest dose (20 g/L). The formulation obtained in this study meets the necessary requirements for use as a bio-fertilizer because of the relatively low content of P₂O₅ and the low content of toxic elements. The results confirm the utilization of Acidithiobacillus ferrooxidans in the biosolubilization of phosphorus renewable raw materials that can alleviate the problem of the world's depleting phosphorite deposits.

Microbial copper resistance: importance in biohydrometallurgy

Industrial biomining has been extensively used for many years to recover valuable metals such as copper, gold, uranium and others. Furthermore, microorganisms involved in these processes can also be used to bioremediate places contaminated with acid and metals. These uses are possible due to the great metal resistance that these extreme acidophilic microorganisms possess. In this review, the most recent findings related to copper resistance mechanisms of bacteria and archaea related to biohydrometallurgy are described. The recent search for novel metal resistance determinants is not only of scientific interest but also of industrial importance, as reflected by the genomic sequencing of microorganisms present in mining operations and the search of those bacteria with extreme metal resistance to improve the extraction processes used by the biomining companies.