A three-dimensional computed tomography study of distal femoral morphology in Japanese patients: gender differences and component fit

Clinical significance of distal femur morphology in a healthy Mongolian youth population

Morphological parameters of knee joint are related to race and nationality. At present, knee prosthesis come from white male population. Due to the mismatch between the prosthesis and other ethnic groups, the prosthesis life span is reduced, revision surgery and the patients' economic burden are increased. There is no data of the Mongolian ethnic group. In order to treat patients more accurately, we measured the Mongolian data of the femoral condyle. A total of 122 knee joints were scanned in 61 volunteers (21 males and 40 females) with an average age of 23.259 ± 1.395 years. The Mimics software was used to reconstruct the 3D image and measure the data of each line. The data were analyzed by statistical methods such as t test, and P < 0.05 was taken as the significant. 122 normal femoral condyle data were obtained. The mean transverse diameter of femoral condyle is 76.472 ± 5.952 mm, medial condyle is 29.259 ± 11.461 mm, and the sagittal diameter of the medial condyle was 56.758 ± 4.163 mm. The transverse diameter of the lateral femoral condyle is 29.388 ± 3.157 mm, the sagittal diameter of the lateral condyle is 58.937 ± 3.527 mm and the femoral plane rate is 1.264 ± 0.072. (1) There was no statistical significance in the left and right knee joint data (P > 0.05). (2) The different genders data of femoral condyle were statistically significant (P < 0.05). (3) Compared with other nationalities and races, the data of femoral condyle are different. (4) There are differences between femoral surface ratio and mainstream prosthesis data.

Does One Size Really Fit All? Morphometric Analysis of Distal Femur and Proximal Tibia in an Ethnic Indian Population and Correlation to the Sizing of Existing Total Knee Arthroplasty Implants

BACKGROUND

Total knee arthroplasty (TKA) has been proven to be a highly efficacious procedure for patients with end-stage osteoarthritis who have persistent symptoms not managed by conservative treatment. A large percentage of standard commercially available total knee arthroplasty (TKA) implants are imported and designed based on morphometric data of Western populations, which are known to have a larger build compared to their Asian counterparts. Hence, these prostheses may sometimes not be the best fit for Indian patients. We conducted this study to examine the anthropometry of osteoarthritic knees of Indian patients, analyze anatomical differences between males and females, and compare these measurements with commercially available five TKA implants.

METHODS

Morphometric data were collected from 150 Indian patients with osteoarthritis of the knee using computed tomography (CT) scans. The mediolateral (ML) and anteroposterior (AP) dimensions of the distal femur and proximal tibia were measured, and aspect ratios (ML/AP) were calculated. These measurements were correlated with current commercially available implant sizes.

RESULTS

We examined CT scans of 100 female and 50 male patients' knees with a combined average age of 58.2 ± 7.5 years. The mean mediolateral and anteroposterior dimensions of the distal femur for Indian knees were 74.5 ± 5.8 mm and 58.0 ± 4.2 mm, respectively, whereas for the proximal tibia, 69.1 ± 5.5 mm and 43.8 ± 3.6, respectively. The mean aspect ratio for the femur was 129.0 ± 6.0 and for the tibia was 158.1 ± 9.1. Male dimensions were found to be greater than female dimensions in all measured aspects of the distal femur and proximal tibia for the Indian population. However, the aspect ratio of the tibia was not found to vary with gender. When compared with the dimensions of other ethnic groups, the size of Indian knees was found to be smaller than Caucasians.

CONCLUSIONS

There is a mismatch between the anatomy of Indian knees and currently available TKA implants, and these implants may have drawbacks when implanted in Indian patients. The obtained anthropometric data may provide useful directions for designing TKA implants of more suitable sizes and aspect ratios for Indian patients.

Sexual dimorphism and racial diversity render bone-implant mismatch inevitable after off-the-shelf total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the variability in femoral geometric ratios among knees of different sexes and races, and to appreciate whether the observed variability is accommodated by commonly implanted total knee arthroplasty (TKA) components. The hypothesis was that the anthropometric studies report considerable variability of femoral geometric ratios among sexes and races.

METHODS

This systematic review and meta-analysis was performed according to the Preferred Reporting Items for Systematic reviews and Meta-analyses (PRISMA) criteria. Two authors independently conducted an electronic search using MEDLINE^® and Embase^® on 6 July 2020 for clinical studies reporting on femoral geometric ratios among sexes and races. Femoral geometric ratios were graphically represented as means and 2 standard deviations, and compared to those of 13 commonly implanted femoral components.

RESULTS

A total of 15 studies were identified that reported on a combined total of 2627 knees; all reported the aspect ratio, and 2 also reported the asymmetry ratio and trapezoidicity ratio. Men had wider knees than women, and compared to Caucasian knees, Arabian and Indian knees were wider, while East Asian were narrower. There were no differences in asymmetry ratio between men and women, nor among Caucasian and East Asian knees. Men had more trapezoidal knees than women, and East Asian knees were more trapezoidal than Caucasian knees. The commonly implanted femoral components accommodated less than a quarter of the geometric variability observed among sexes and races.

CONCLUSION

Anthropometric studies reported considerable sexual dimorphism and racial diversity of femoral geometric ratios. Since a surgeon generally only uses one or a few TKA brands, bone-implant mismatch remains unavoidable in a large proportion of knees. These findings support the drive towards personalized medicine, and accurate bone-implant fit may only be achievable through customisation of implants, though the clinical benefits of custom TKA remain to be confirmed.

LEVEL OF EVIDENCE

IV.

Do the distal femur and the proximal tibia have narrower aspect ratios in smaller knees? : A morphological analysis of osteoarthritic knees in the Japanese population using computed tomography

BACKGROUND

Whether the distal femur and the proximal tibia have narrower aspect ratios in smaller knees has not been clarified. The purpose of this study was to confirm the dimensional characteristics of the distal femur and the proximal tibia using a novel method for consistently determining knee size.

METHODS

A total of 220 Japanese osteoarthritic knees (160 female and 60 male knees) were analyzed using computed tomography. The mediolateral (ML) and the anteroposterior (AP) dimensions of the distal femur (fML, fAP) and the proximal tibia (tML, tAP) were measured. The aspect ratios (ML/AP) of the distal femur (fML/fAP) and the proximal tibia (tML/tAP) were assessed against the product of AP × ML as a consistent determination of knee size.

RESULTS

The fML/fAP ratios positively correlated with knee size (fAP × fML) (r = 0.420, p < 0.001), only in the combined cohort, attributable to the narrower aspect ratios of female knees. No correlations were found between the tML/tAP ratios and knee size (tAP × tML) among females, males, nor all subjects (p = 0.299, 0.994, and 0.996, respectively). Aspect ratio correlations to knee size diverged between the three knee size indices, AP, ML, and AP × ML.

CONCLUSIONS

AP × ML was the meaningful option for knee size indexing in our morphological analyses. The distal femur, but not the proximal tibia, was found to have a narrower aspect ratio in female knees in the Japanese population.

Measurement of distance between femoral insertion of fibular collateral ligament and popliteus tendon: A magnetic resonance imaging based study

BACKGROUND

Fibular collateral ligament (FCL), popliteus tendon (PT) and popliteofibular ligament are key components of posterolateral corner (PLC) of the knee. These structures play a vital role in stabilizing the knee against varus and external rotation. The Anatomical location of these structures should be well understood for adequate reconstruction of PLC injuries.Purpose of our study is to measure mean distance between femoral insertion of FCL and PT; femoral medio-lateral dimension (MLD) and antero-posterior dimension (APD) of lateral femoral condyle on Magnetic Resonance Imaging (MRI) images and its relevance to anatomical reconstruction of PLC injuries of knee.

METHODS

The knee MRI data of 68 patients (43 males and 25 females) were studied. Measurement of PT-FCL distance was done in sagittal proton density fat-saturated (PDFS) sequence images. The femoral MLD and APD were measured in axial PDFS sequence images. The mean of each parameter was calculated and analyzed. To identify inter-observer agreement, we calculated Intra-Class Correlation Coefficient (ICC) for each parameter.

RESULTS

The mean PT-FCL distance was 16.85 ± 1.55 mm (range 12.9-21.2 mm). In our observation, PT always inserts anteriorly and distally to FCL insertion on the lateral femoral condyle. The mean MLD was 78.74 ± 5.84 mm (range 65-90 mm). The Mean APD of the lateral femoral condyle was 60.47 ± 4.00 mm (range 52.5-69.5 mm). The difference between the mean values of all the above parameters in both genders was statistically significant (p-value <0.05). Inter-observer agreement was very good for measurement of PT-FCL distance (ICC 0.96), MLD (ICC 0.98) and APD (ICC 0.97).

CONCLUSION

The mean distance between femoral insertion of FCL and PT in our study was less in comparison to most of the western literature. However, despite this anatomical variation, the method of PLC reconstruction proposed in western literature can be safely advocated in the Indian population as well.

Gender differences in femoral trochlea morphology

PURPOSE

This study aimed to analyze the morphology of the anterior femoral condyle using a quantitative three-dimensional reconstruction method. The morphological data were compared between genders.

METHODS

Computed tomography scans of femurs were taken from 90 healthy subjects and then reconstructed in 3D modeling software. Coaxial cutting planes were created at 10° increments to measure the lateral and medial anterior condylar heights (LACH and MACH, respectively), lateral and medial trochlear groove widths (LTW and MTW, respectively), and for trochlear groove tracking. The absolute values and normalized data were compared between male and female subjects. The sulcus angle and deepest point of the trochlear groove at each cross-section were also analyzed to determine the differences in the depth of the trochlear groove.

RESULTS

The absolute dimensions of LACH, MACH, LTW, and MTW were significantly smaller in the female subjects, by 10.5%, 36.9%, 10.3%, and 11.0%, respectively, than in the males (p < 0.05). After normalization, no significant difference was found in the condylar height between the genders. However, the female subjects had a significantly larger value of approximately 7.9% for the normalized trochlear width.

CONCLUSION

Male subjects had greater condylar heights and widths than the female subjects. Although the trajectory of the trochlear groove varied greatly among the subjects, the trochlear groove appeared to be wider and shallower in the female subjects than in the male subjects. These results provide important information for the design of femoral trochlea to fit Asian female patients.

LEVEL OF EVIDENCE

III.

Impact of posterior femoral condylar cartilage and posterior intercondylar distance on rotation of femoral component in total knee arthroplasty

Background

Greater accuracy is needed when determining the final femoral component (FC) rotation during total knee arthroplasty (TKA), because this parameter affects soft tissue balance during flexion and patellar tracking. Anatomical markers, such as the epicondylar axis, are typically used to determine the final FC rotation, although intraoperative confirmation may be challenging. Therefore, rotational position is frequently determined with the posterior condylar axis (PCA) as a landmark. However, the thickness of the posterior condylar cartilage has not been considered and may not be represented on preoperative images. We used plain X-rays to measure the thickness of the medial and lateral posterior condylar cartilage fragments postoperatively, and investigated the effects of differences in cartilage thickness on final FC rotation.

Methods

Fifty knees (19 men, 31 women) underwent primary TKA to treat medial knee osteoarthritis at our hospital between August 2015 and May 2017. All knees were treated using an Attune PS (DePuy Synthes, Inc., Warsaw, IN). We first measured the distance between the posterior femoral condyles, resected the posterior condyle, and measured the thickness of the resected cartilage fragments. We then took X-ray images from a direction tangential to the osteotomy surface, secured the cartilage fragments with digital calipers, and measured the thickness of the cartilage. We investigated the effects of differences in cartilage thickness on final FC rotation of the residual medial and lateral cartilage with a trigonometric function.

Results

Medial condylar cartilage thickness averaged 0.6 ± 0.5 mm and the lateral condylar thickness averaged 1.8 ± 0.6 mm; posterior intercondylar distance averaged 46.1 ± 3.3 mm and average impact on rotation of the cartilage remnant was 1.5 ± 0.9° (− 0.1–3.9°). There may be measurement error of up to 4° in the maximum values compared with the preoperative plan in cases with short intercondylar distance.

Conclusions

In cases where the FC external rotation angle is determined using the posterior condyles as landmarks, this angle can be affected by the intercondylar distance, especially in Japanese women who have small physical stature. This angle can potentially be much larger, so caution is advised. Our results suggest that several anatomical landmarks should be referenced to achieve accurate FC rotation.

Measurement of proximal tibial morphology in northeast Chinese population based on three-dimensional reconstruction computer tomography

Tibial component of total knee arthroplasty (TKA) is designed according to morphology of proximal tibia to a large extent. Owing to racial difference, current design of tibial component based on Caucasian may not be suitable for Chinese patients. Meanwhile, data of proximal tibial morphology in Chinese population is lacking. The objective of this research was to investigate proximal tibial morphology of northeast Chinese population.Computer tomography (CT) image of 164 northeast Chinese participants was collected. After three-dimensional (3D) reconstruction, size of tibia plateau and TKA resected surface were gauged to guide the design of TKA tibia prothesis in northeast Chinese population. Measurement of tibial size mainly includes tibial mediolateral length (tML), tibial medial/lateral anteroposterior length (tMAP and tLAP). Afterwards, tML/tAP ratio of tibia plateau and TKA resected surface were calculated as feature point of tibia prothesis. tMAP/tLAP ratio of TKA resected surface was calculated to represent tibial asymmetry degree. Medial and lateral posterior tibial slope (MPTS and LPTS) were also measured to give reference to posterior angle of tibia prothesis and angle of tibia osteotomy in TKA. Independent sample t test was performed to conduct statistical analysis, P < .05 was regarded as statistically significance.Northeast Chinese male has larger knee size than female. Significant difference of tML/tAP ratio was also observed between male and female on tibia plateau (1.71 ± 0.07 vs 1.77 ± 0.09) but not on TKA resected surface (1.60 ± 0.05 versus 1.61 ± 0.06). Significant difference of tMAP/tLAP ratio between male and female was also found and they were 1.31 ± 1.03 and 1.11 ± 0.05 respectively. Northeast Chinese female has higher PTS than male (MPTS: 9.56 ± 2.96° vs 8.81 ± 2.87° and LPTS: 8.57 ± 3.19° vs 8.44 ± 2.76°).Significant gender-difference of tibial size and asymmetry degree of tibial resected surface were found between northeast Chinese male and female. Meanwhile, northeast Chinese population has smaller knee size, larger PTS and tML/tAP ratio than that of Caucasian population. Therefore, Chinese-specific and gender-specific tibial prostheses were strongly recommended to be designed.

Sexual and ethnic polymorphism render prosthetic overhang and under-coverage inevitable using off-the shelf TKA implants

PURPOSE

Unexplained pain and stiffness after total knee arthroplasty (TKA) often result from mismatch between implant geometry and knee morphology, which depends on patient size, sex, and ethnicity. This study aimed to determine whether size, sex, or ethnicity are independently associated with distal femoral morphology in healthy Caucasian and Asian knees, and to compare anatomic ratios to those of commercially available TKA implants.

METHODS

Two series of computed tomography (CT) angiograms from France (264 knees) and China (259 knees) were used to digitize osteometric landmarks at the level of the femoral epicondyles, to measure anteroposterior (AP) and mediolateral (ML) dimensions at the anterior, posterior, medial, and lateral zones. The aspect (ML/AP), trapezoidicity (MLp/MLa), and asymmetry (APl/APm) ratios, as well as the sulcus angle were calculated and compared to those of 9 TKA models. Multivariable analyses were performed to determine whether anatomic ratios were independently associated with sex, origin, or size.

RESULTS

Multivariable analyses revealed that, independently from size, female knees were narrower (β = - 0.03; p < 0.001) and more asymmetric (β = 0.02; p < 0.001), while Chinese knees were more trapezoidal (β = 0.04; p = 0.002) and asymmetric (β = 0.02; p < 0.001) with shallower trochleae (β = 6.4°; p < 0.001). Compared to native knees, most implants were too wide, and many of the recent models too 'trapezoidal'. Most prosthetic trochleae were too shallow compared to French knees, but within the third quartile of Chinese knees.

CONCLUSIONS

The morphology of the distal femur depends on sex and ethnicity independently from size. The wide spectrum of morphotypes observed cannot be covered by 'off-the-shelf' TKA models, and until customized implants become more accessible, prosthetic overhang, and under-coverage remain inevitable.

LEVEL OF EVIDENCE

III, Retrospective comparative study.

Analysis of Defect Size and Ratio to Condylar Size With Respect to Outcomes After Isolated Osteochondral Allograft Transplantation

BACKGROUND

Osteochondral allograft transplantation (OCA) is a successful knee joint preservation technique; however, the effects of defect size and defect size:condyle ratio (DSCR) are poorly understood.

PURPOSE

To quantify clinical outcomes of isolated OCA of the knee based on defect size and DSCR.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

Data from patients who underwent OCA of the knee without major concomitant procedures by a single surgeon were analyzed at a minimum follow-up of 2 years. Osteochondral defect size was measured intraoperatively, and femoral condyle size was measured with preoperative imaging. Patient-reported outcomes, reoperations, and survival rates were analyzed per defect size and DSCR, comparing males and females and patients <40 and ≥40 years old.

RESULTS

Sixty-eight patients were included, of whom 57% were male (mean ± SD: age, 34.5 ± 10.3 years; follow-up, 5.2 ± 2.6 years). Mean osteochondral defect size and DSCR were 3.48 ± 1.72 cm² and 0.2 ± 0.1, respectively. Defect size was larger among males as compared with females (3.97 ± 1.71 cm² vs 2.81 ± 1.16 cm², P = .005), while DSCRs were not significantly different between sexes ( P = .609). The cohort as a whole demonstrated improvements in the following scores: Lysholm, International Knee Documentation Committee, Knee injury and Osteoarthritis Outcome Score, Western Ontario and McMaster Universities Osteoarthritis Index, and 12-Item Short Form Health Survey Physical ( P < .05). There were 27 reoperations (39.7%) at a mean of 2.5 ± 1.92 years and 8 failures (11.8%) at a mean of 2.62 ± 1.3 years. Mean DCSR was higher among patients with graft failure (0.26 ± 0.20 vs 0.19 ± 0.07, P = .049). After stratification by age, failures among patients ≥40 years old were associated with a larger defect size (mean 5.37 ± 3.50 cm² vs 3.22 ± 1.32 cm², P = .03) and higher DSCR (mean 0.30 ± 0.25 vs 0.19 ± 0.06, P = .05) when compared with nonfailures. Failures among patients <40 years old were not significantly associated with defect size or DSCR ( P > .05) as compared with nonfailures.

CONCLUSION

Patients undergoing isolated OCA transplantation demonstrated significant clinical improvements and a graft survival of 88.2% at 5.2 years. Failures overall were associated with a larger DSCR, and failures among patients ≥40 years old with a larger DSCR and larger defect size. Increasing defect size among males was positively correlated with some improved outcomes, although this was not maintained in analysis of the DSCR, suggesting similar prognosis after OCA regardless of sex.

CLINICAL RELEVANCE

Failed osteochondral allografts are associated with larger defect sizes and defect:condyle ratios in this study, providing additional information to surgeons for appropriate patient consultation.

Anthropometric Measurements of Knee Joints in the Hispanic Population

BACKGROUND

Total knee arthroplasty (TKA) systems provide a set of incrementally sized tibial and femoral components intended to accommodate most knee parameters. However, the most commonly used systems in the United States were developed using data from Caucasian patients which might not lead to the best fit in non-Caucasians. Therefore, we wanted to evaluate whether these TKA systems proportionally match femoral and tibial measurements in Hispanics.

METHODS

All lower extremity magnetic resonance imaging performed at our institution between January 2007 and October 2015 were screened. A total of 500 nonarthritic knees from the same number of Hispanic patients were included in this retrospective descriptive radiographic study. Intraoperative osseous TKA resections were simulated on magnetic resonance imaging. Linear regression analyses were used to contrast the mediolateral (ML) width/anteroposterior (AP) length of simulated resected femoral condyle and tibia with the ML/AP dimensions of components offered by 4 current TKA systems.

RESULTS

Simulated resected male femurs tended to be wider than most TKA system components for a given AP size, probably leading to component ML underhang. Altogether, systems studied accommodated most AP and ML measurements of female condyles. However, we identified subsets of Hispanic female patients with certain AP lengths and/or ML widths that particular knee systems could not accommodate. Resected male and female tibias tended to be slightly narrower than all TKA systems for a given AP size.

CONCLUSION

The results of our study provide valuable data concerning the unique morphology of the Hispanic knee. These data can assist surgeons in the selection of the most suitable TKA systems for these patients.

The Posterior Condylar Cartilage Affects Rotational Alignment of the Femoral Component in Varus Knee Osteoarthritis

Rotational alignment of the femoral component in total knee arthroplasty (TKA) is important for patellar tracking and ligament balance. Preoperative planning based on radiography might have a potential risk for over-rotation because these X-ray based measurements can not detect asymmetric cartilage wear on posterior condyle. The purpose of this study is to evaluate the effect of the posterior condylar cartilage of varus osteoarthritic knee on rotational alignment of the femoral component in TKA. We established two different condylar twist angles (CTA) from intraoperative multiplanar reconstruction (MPR) images and intraoperative information of navigation system. The CTA measured by a navigation system that includes the cartilage (4.8±2.0°) was smaller than those measured by MPR images, which does not include the cartilage (6.6±2.1°) (p<0.05). The difference between these two angles that corresponds to the remaining posterior condylar cartilage was 1.7±1.2°. This result demonstrated that the posterior condylar cartilage might lead to over-rotational of the femoral component in varus osteoarthritic knee. Therefore, when determining rotational alignment of the femoral component, surgeons should consider the effect of the remaining posterior condylar cartilage to avoid the over-rotation of the femoral component, especially in severe varus knees. J. Med. Invest. 64: 24-29, February, 2016.

What Differences in Morphologic Features of the Knee Exist Among Patients of Various Races? A Systematic Review

BACKGROUND

Most TKA prostheses are designed based on the anatomy of white patients. Individual studies have identified key anthropometric differences between the knees of the white population and other major ethnic groups, yet there is limited understanding of what these findings may indicate if analyzed collectively.

QUESTION/PURPOSE

What are the differences in morphologic features of the distal femur and proximal tibia among and within various ethnicities?

METHODS

A systematic review of the PubMed database and a hand-search of article bibliographies identified 235 potentially eligible English-language studies. Studies were excluded if they did not include morphology results or had insufficient data for analysis, were unrelated to the distal femur or proximal tibia, were conducted in pediatric patients or those undergoing unicondylar knee arthroplasty, or bone surface measurements were obtained for trauma products. This left 30 eligible studies (9050 knees). Study quality was assessed and reported as good, fair, or poor according to the NIH Quality Assessment Tool for Observational Cohort and Cross-Sectional Studies. Morphometric data for the distal femur and proximal tibia were available for four ethnic groups: East Asian (23 studies; 5543 knees), white (11 studies; 3111 knees), Indian (three studies; 283 knees), and black (three studies; 113 knees). Although relatively underrepresented, the knees from the Indian and black studies were maintained for hypothesis-generating purposes and to highlight crucial gaps in the data. The two key dimensions for selecting a suitable implant based on a patient's unique anatomy-AP length and mediolateral (ML) width-were assessed for the femur and tibia, in addition to aspect ratio, calculated by dividing the ML width by the AP length. Study measurement techniques were compared visually when possible to ensure that each pooled study conducted a similar measurement process. Any significant measurement outliers were reviewed for eligibility to determine if the measurement techniques and landmarks used were comparable to the other studies included.

RESULTS

White patients had larger femoral AP measurements than East Asians (62 mm, [95% CI, 57-66 mm] vs 59 mm, [95% CI, 54-63 mm]; mean difference, 3 mm; p < 0.001), a smaller femoral aspect ratio than East Asians (1.20, [95% CI, 1.11-1.29] vs 1.25, [95% CI, 1.16-1.34]; mean difference, 0.05; p = 0.001), and a larger tibial aspect ratio than black patients (1.55, [95% CI, 1.40-1.71] vs 1.49, [95% CI, 1.33-1.64]; mean difference, 0.06; p = 0.005).

CONCLUSIONS

This analysis uncovered differences of size (AP height and ML width of the femur and tibia) and shape (tibial and femoral aspect ratios) among knees from white, East Asian, and black populations. Future research is needed to understand the clinical implications of these discrepancies and to provide additional data with underrepresented groups.