Anatomic placement of the femoral tunnel by a modified transtibial technique using a large-offset femoral tunnel guide: A cadaveric study

The method of femoral tunnel drilling in anterior cruciate ligament reconstruction does not influence the return to sport rate

Background

Limited evidence is available comparing the modified transtibial (MTT) and transportal (TP) techniques in anterior cruciate ligament (ACL) reconstruction and their impact on returning to sports participation. The objective was to analyze the outcomes after arthroscopic reconstruction of the ACL in recreational athletes with a 2-year postoperative follow-up, comparing the MTT and TP techniques, based on the method used to drill the femoral tunnel.

Hypotesis

The rate of return to sport would be comparable regardless of the surgical technique used.

Material and methods

A retrospective study was conducted with 66 patients who underwent arthroscopic monofascicular ACL reconstruction between September 2016 and March 2020. Patients aged between 16 and 50 years old, recreational athletes at Tegner levels 6 and 7, with a 2-year follow-up were included. Groups were established for comparative analysis (MTT vs TP) based on the method for drilling the femoral tunnel. The main outcome variable was the return to sport at the same level. Secondary variables included patient satisfaction evaluated with a visual analogue scale (VAS) and knee function according to the Lysholm scale.

Results

At 2 years of postoperative follow-up, the return to sport rate was 30.3 % in the MTT group and 33.3 % in the TP group (p = 0.791). There were no significant differences between both groups in patient satisfaction (p = 0.664) and knee function (p = 0.113).

Conclusion

Drilling the femoral tunnel with the MTT and TP techniques did not influence the rate of return to sport, patient satisfaction, and knee function in recreational athletes with 2 years of postoperative follow-up.

Level of evidence

III.

Clinical Outcomes of a Novel Hybrid Transtibial Technique for Femoral Tunnel Drilling in Anterior Cruciate Ligament Reconstruction: A Large Single-Center Case Series With a Minimum 2-Year Follow-up

Background

A novel hybrid transtibial (HTT) approach to femoral tunnel drilling in anterior cruciate ligament reconstruction (ACLR) has been developed that circumvents the need for knee hyperflexion and orients the graft in the most anatomic position without sacrificing the tunnel length or aperture.

Hypothesis

Patients who underwent ACLR utilizing the HTT technique would achieve excellent patient-reported outcome scores and experience low rates of graft failure and reoperations.

Study Design

Case series; Level of evidence, 4.

Methods

Patients who underwent primary ACLR at a single institution between 2005 and 2020 were retrospectively reviewed. Patients treated with the HTT, anteromedial portal (AMP), and transtibial (TT) approaches were matched based on age, sex, and body mass index ±3 kg/m2. Demographic and surgical data as well as femoral tunnel angle measurements on anteroposterior and lateral radiographs were collected for the 3 groups. However, clinical outcomes were only reported for the HTT group because of concerns of graft heterogeneity.

Results

A total of 170 patients (median age, 26.5 years [interquartile range (IQR), 18.0-35.0 years]) who underwent ACLR using the HTT approach were included. The median coronal- and sagittal-plane femoral tunnel angles were 47° (IQR, 42°-53°) and 40° (IQR, 34°-46°), respectively. The sagittal-plane femoral tunnel angles in the HTT group were significantly more horizontal compared with those in the TT group (P < .0001), whereas the coronal-plane femoral tunnel angles in the HTT group were found to be significantly more vertical compared with those in the AMP group (P = .001) and more horizontal compared with those in the TT group (P < .0001). The graft failure and reoperation rates in the HTT group at a minimum 2-year follow-up were 1.8% (3/170) and 4.7% (8/170), respectively. The complication rate was 6.5% (11/170), with the most common complication being subjective stiffness in 7 patients. The median Lysholm score was 89.5 (IQR, 79.0-98.0); the median International Knee Documentation Committee score was 83.9 (IQR, 65.5-90.8); and the median Veterans RAND 12-Item Health Survey physical and mental component summary scores were 55.0 (IQR, 52.6-55.9) and 56.2 (IQR, 49.1-59.3), respectively.

Conclusion

ACLR using the HTT technique was associated with low graft retear and revision surgery rates and good patient-reported outcome scores at medium-term follow-up and demonstrated femoral tunnel obliquity on postoperative radiographs that correlated with optimal parameters previously reported in cadaveric and biomechanical studies.

Clinical outcome of anterior cruciate ligament reconstruction with modified transtibial and anteromedial portal

Arthroscopic ACL reconstruction is the current standard care of treatment for anterior cruciate ligament (ACL) injuries. Modified transtibial (mTT) and anteromedial portal (AMP) techniques aim at the anatomical placement of femoral tunnel. Controversy existed in the literature with regard to the outcome of these techniques. Hence, we designed a retrospective comparative study to analyse the clinical and functional outcomes of mTT and AMP techniques. We hypothesized that there would be no difference between the clinical and functional outcomes in mTT and AMP techniques. This retrospective observational study was conducted in consecutive patients who underwent arthroscopic ACL reconstruction using semitendinosus-gracilis (STG) quadrupled graft in our tertiary care centre with a minimum follow-up of two years. Out of 69 patients, 37 had undergone ACL reconstruction by mTT technique and remaining by AMP technique. All the patients were assessed clinically by anterior drawer, Lachman's, pivot shift and single-legged hop test. Lysholm Knee Scoring Scale and International Knee Documentation Committee (IKDC) subjective knee evaluation score were used for the functional status. Knee instability was assessed objectively by KT-1000 arthrometer. There was no statistically significant difference in baseline demographic characteristics between mTT and AMP groups. At the end of 2 years, no statistically significant difference was noted in the anterior drawer and Lachman's test. Though not significant, IKDC scores and Lysholm's scores showed a better outcome in the AMP group when compared to the mTT group. AMP group showed significantly better outcome with KT-1000 arthrometer. Based on the results obtained, we presume that overall both mTT and AMP have similar functional outcome. However, as AMP technique offers significantly improved subjective rotational stability on pivot shift test, better hop limb symmetry index and KT 1000 readings compared to mTT, we suggest AMP over mTT.

Evaluation of Tibial Tunnel Location with the Femoral Tunnel Created Behind the Resident's Ridge in Transtibial Anterior Cruciate Ligament Reconstruction

Few studies have determined whether a femoral bone tunnel could be created behind the resident's ridge by using a transtibial (TT) technique-single bundle (SB)-anterior cruciate ligament (ACL) reconstruction. The aim of this study was to clarify (1) whether it is possible to create a femoral bone tunnel behind the resident's ridge by using the TT technique with SB ACL reconstruction, (2) to define the mean tibial and femoral tunnel angles during anatomic SB ACL reconstruction, and (3) to clarify the tibial tunnel inlet location when the femoral tunnel is created behind resident's ridge. Arthroscopic TT-SB ACL reconstruction was performed on 36 patients with ACL injuries. The point where 2.4-mm guide pin was inserted was confirmed, via anteromedial portal, to consider a location behind the resident's ridge. Then, an 8-mm diameter femoral tunnel with a 4.5-mm socket was created. Tunnel positions were evaluated by using three-dimensional computed tomography (3D-CT) 1 week postoperatively. Quadrant method and the resident's ridge on 3D-CT were evaluated to determine whether femoral tunnel position was anatomical. Radiological evaluations of tunnel positions yielded mean ( ±  standard deviation) X- and Y-axis values for the tunnel centers: femoral tunnel, 25.2% ± 5.1% and 41.6% ± 10.2%; tibial tunnel, 49.2% ± 3.5%, and 31.5% ± 7.7%. The bone tunnels were anatomically positioned in all cases. The femoral tunnel angle relative to femoral axis was 29.4 ± 5.5 degrees in the coronal view and 43.5 ± 8.0 degrees in the sagittal view. The tibial tunnel angle relative to tibial axis was 25.5 ± 5.3 degrees in the coronal view and 52.3 ± 4.6 degrees in the sagittal view. The created tibial bone tunnel inlet had an average distance of 13.4 ± 2.7 mm from the medial tibial joint line and 9.7 ± 1.7 mm medial from the axis of the tibia. Femoral bone tunnel could be created behind the resident's ridge with TT-SB ACL reconstruction. The tibial bone tunnel inlet averaged 13.4 mm from the medial tibial joint line and 9.7 mm medial from the tibia axis.

Comparison of Modified Transtibial and Outside-In Techniques in Anatomic Single-Bundle Anterior Cruciate Ligament Reconstruction

PURPOSE

To compare the bending angle of anterior cruciate ligament (ACL) graft at femoral tunnel, graft maturation, and tunnel positions and the clinical outcomes of the modified transtibial (mTT) and outside-in (OI) techniques.

METHODS

Patients who met the inclusion criteria were divided into the mTT group (n = 50) and the OI group (n = 50). Using 3-dimensional computed tomography (3-D CT), tunnel placement and femoral tunnel bending angle were analyzed. The 3.0-T magnetic resonance imaging (MRI) was used to assess the graft signal intensity (indicative of maturation) with signal/noise quotient (SNQ). Graft tension and synovialization were evaluated with second-look arthroscopy in all cases. Clinical and functional tests were completed at 36 months of follow-up.

RESULTS

When tunnel placements were analyzed using the quadrant method, no significant differences were found between the mTT group and the OI group. The femoral graft bending angle was reduced in the mTT group, and the total mean of SNQ values and mean SNQ values at the femoral intraosseous and proximal graft of the mTT group were significantly lower than in the OI group (P < .001), respectively. The femoral graft bending angle on the coronal and axial planes showed moderate-to-strong correlation with the SNQ values at the femoral intraosseous and proximal graft. Second-look arthroscopy revealed better synovialization in the mTT group than in the OI group (P = .040), with no significant difference in graft tension between the 2 groups (P = .328).

CONCLUSIONS

Anatomic tunnel placements did not vary between the mTT group and the OI group. However, the mTT group had more benefits in femoral graft bending angle and showed higher graft maturity and better synovial coverage than the OI group, although there were no significant differences in clinical outcomes. The acute femoral graft bending angle might negatively affect the maturation of proximal graft. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Intraoperative Graft Isometry in Anatomic Single-Bundle Anterior Cruciate Ligament Reconstruction

Purpose

Little is known about the isometry of anatomic single-bundle anterior cruciate ligament (ACL) tunnel positions in vivo although it is closely related to graft tension throughout the range of motion. The purpose of this study was to evaluate intraoperative graft isometry in anatomic single-bundle ACL reconstruction in vivo.

Materials and Methods

Graft length changes were assessed before bio-screw fixation in the tibial tunnel by pulling the graft with tensions of 20 lbs and 30 lbs in full extension at flexion angles of 30°, 60°, 90°, and 120°.

Results

At the flexion angle of 30°, 20 lbs and 30 lbs of tension showed −0.4 mm and −0.6 mm length changes, respectively. The greater the flexion angle of the knee, the shorter the graft length in the joint. At the flexion angles of 90° and 120°, there was significant difference in the graft length change between 20 lbs and 30 lbs of tension.

Conclusions

Anatomic single-bundle ACL reconstruction was non-isometric. The graft length was the longest in full extension. The tension of graft became loose in flexion. At the flexion angles of 90° and 120°, there was significant difference in the graft length change between 20 lbs and 30 lbs of tension.

Current Strategies and Future Directions to Optimize ACL Reconstruction in Adolescent Patients

The incidence of anterior cruciate ligament (ACL) injuries in the pediatric population has risen in recent years. These injuries have historically presented a management dilemma in skeletally immature patients with open physes and significant growth remaining at time of injury. While those nearing skeletal maturity may be treated with traditional, transphyseal adult techniques, these same procedures risk iatrogenic damage to the growth plates and resultant growth disturbances in younger patients with open physes. Moreover, conservative management is non-optimal as significant instabilities of the knee remain. Despite the development of physeal-sparing reconstructive techniques for younger patients, there remains debate over which procedure may be most suitable on a patient to patient basis. Meanwhile, the drivers behind clinical and functional outcomes following ACL reconstruction remain poorly understood. Therefore, current strategies are not yet capable of optimizing surgical ACL reconstruction on an individualized basis with absolute confidence. Instead, aims to improve surgical treatment of ACL tears in skeletally immature patients will rely on additional approaches in the near future. Namely, finite element models have emerged as a tool to model complex knee joint biomechanics. The inclusion of several individualized variables such as bone age, three dimensional geometries around the knee joint, tunnel positioning, and graft tension collectively present a possible means of better understanding and even predicting how to enhance surgical decision-making. Such a tool would serve surgeons in optimizing ACL reconstruction in the skeletally immature individuals, in order to improve clinical outcomes as well as reduce the rate of post-operative complications.