Microencapsulation of Lactobacillus rhamnosus ATCC 7469 in whey protein isolate-crystalline nanocellulose-inulin composite enhanced gastrointestinal survivability

Sodium alginate/low methoxyl pectin composite hydrogel beads prepared via gas-shearing technology for enhancing the colon-targeted delivery of probiotics and modulating gut microbiota

The probiotic encapsulation system has the potential to enhance the prebiotic effects of probiotics. However, challenges arise from the release behavior of this system in vivo and the large size of hydrogel beads. This study aims to address the issues related to the size of previous hydrogel beads and assess the colon-targeted delivery of probiotic polysaccharides composite hydrogel beads (PPHB). PPHB prepared by gas-shearing technique significantly reduced the average particle size and demonstrated a high protective capacity for probiotics (after simulating intestinal conditions for 4 h, the viability of encapsulated probiotics remained at 107 CFU/g). The use of indocyanine green along with near-infrared-II in vivo imaging technology demonstrated the colon-targeted delivery of PPHB in vivo, which also extended the retention time of probiotics in the cecum and colon. Additionally, the colon-targeted delivery of PPHB was also demonstrated by dietary supplementation in vivo. PPHB significantly enhanced the diversity and richness of intestinal microflora species, increased the levels of short-chain fatty acids, raised the relative abundance of beneficial bacteria, and significantly decreased the relative abundance of harmful bacteria. Alginate-based PPHB is more suitable for encapsulating functional ingredients for colon-targeted delivery and modulating gut microbiota.

Effect of Sodium Alginate-Bulk Chitosan/Chitosan Nanoparticle Wall Matrix on the Viability of Lactobacillus plantarum Under Simulated Gastrointestinal Fluids

The viability of probiotic cells decreases during passage through the gastrointestinal tract. The process of probiotics encapsulation with sodium alginate and chitosan polymers was carried out to protect the Lactobacillus plantarum in adverse conditions. Lactobacillus plantarum was entrapped in sodium alginate/chitosan (SA/BChi) and sodium alginate/nano-chitosan (SA/NChi) wall materials. Encapsulating L. plantarum with SA/BChi and SA/NChi resulted in a high encapsulation efficiency % of ~ 86.41 to 91.09%. In addition, coating bacteria cells in encapsulants improved the survivability of the cells under the simulated gastrointestinal fluids by ~ 52.61% in SA/Chi and 58.04% in SA/NChi compared to 29% for unencapsulated forms. Probiotic beads under field emission-scanning electron microscopy (FE-SEM) were morphologically compact with a cracked appearance of SA/NChi beads. The Fourier transform-infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) showed vigorous electrostatic interaction between polymers, as well as the high melting points, which corroborate the previous investigations in the field for using SA/BChi or SA/NChi as a promising encapsulating agent for ameliorating the survivability of probiotics under harsh conditions. The distinctive properties possessed by the two coatings make them excellent candidates for use as polymeric carriers in probiotic delivery systems.

Double Emulsion Microencapsulation System for Lactobacillus rhamnosus GG Using Pea Protein and Cellulose Nanocrystals

Microencapsulation using a double emulsion system can improve the viability of probiotic cells during storage and digestion. In this study, a double emulsion system WC/O/WF was designed to microencapsulate Lactobacillus rhamnosus GG using pea protein (PP) and cellulose nanocrystals (CNCs) at various proportions, and the effect of their proportions on the stability and efficacy of the encapsulation system was studied. The double emulsions were prepared by a two-step emulsification process: the internal aqueous phase containing probiotic strain (WC) was homogenized into the oil phase (O), which was then homogenized into the external aqueous phase (WF) containing 15% wall materials with varying proportions of PP and CNCs [F1 (100:0), F2 (96:4), F3 (92:8), F4 (88:12), F5 (84:16), F6 (80:20)]. The incorporation of CNCs significantly lowered the average particle size and improved the stability of the emulsions. The encapsulation efficiency did not differ significantly across the tested formulations (63-68%). To check the effectiveness of the designed system, a simulated digestion study was conducted in two phases: gastric phase and intestinal phase. The double emulsion microencapsulation significantly improved the viability of encapsulated cells during digestion compared against free cells. Microscopic analysis along with assessment of protein hydrolysis of the double emulsions during the simulated digestion demonstrated a two-stage protection mechanism. This study presented promising results for employing a double emulsion system for the microencapsulation of probiotics and the potential of PP and CNCs in designing such systems.

Viability and stability evaluation of microencapsulated Lactobacillus reuteri in polysaccharide-based bionanocomposite

Microencapsulation is one of the most important methods to enhance the survival of bacteria when exposed to various harsh conditions. The present study evaluated the viability of L. reuteri ATCC 23272 microencapsulated in polysaccharide-based bionanocomposite. Inulin, polydextrose, and pectin were utilized as prebiotics, and magnesium oxide nanoparticles (MgO NPs) as reinforcing agent in the microgel structure. The composition of bionanocomposite was optimized using the simplex-lattice mixture method. Bionanocomposite optimal formulation was achieved by combining 91.6 % inulin and 8.4 % pectin in the presence of MgO NPs. L. reuteri prebiotic score (1.33) and E. coli (1.08), extrusion efficiency (97.57 %), viability after drying (99.37 %), and viability in simulated gastrointestinal conditions (SGI) (91.74 %) were obtained. Not using MgO NPs in the optimal composite structure caused a decrease of 2.14 log CFU/g in SGI. During 28 days of storage of bacteria at 4 and 25 °C, respectively, a reduction of 2.56 and 3.04 log CFU/g was observed for free cells compared to encapsulated cells. SEM, FTIR, and XRD analyses were performed on ingredients and microcapsules with and without bacteria. The results exhibited that the optimal bionanocomposite could be used as a beneficial encapsulation system to improve the performance of probiotics in harsh conditions.

Recent trends in nanocellulose: Metabolism-related, gastrointestinal effects, and applications in probiotic delivery

Nanocellulose, a versatile and sustainable nanomaterial derived from cellulose fibers, has attracted considerable attention in various fields due to its unique properties. Similar to dietary fibers, nanocellulose is difficult to digest in the human gastrointestinal tract. The indigestible nanocellulose is fermented by gut microbiota, producing metabolites and potentially exhibiting prebiotic activity in intestinal diseases. Additionally, nanocellulose can serve as a matrix material for probiotic protection and show promising prospects for probiotic delivery. In this review, we summarize the classification of nanocellulose, including cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BNC), highlighting their distinct characteristics and applications. We discuss the metabolism-related characteristics of nanocellulose from oral ingestion to colon fermentation and introduce the prebiotic activity of nanocellulose in intestinal diseases. Furthermore, we provide an overview of commonly used nanocellulose-based encapsulation techniques, such as emulsification, extrusion, freeze drying, and spray drying, as well as the delivery systems employing nanocellulose matrix materials, including microcapsules, emulsions, and hydrogels. Finally, we discuss the challenges associated with nanocellulose metabolism, prebiotic functionality, encapsulation techniques, and delivery systems using nanocellulose matrix material for probiotics. This review will provide new insight into the application of nanocellulose in the treatment of intestinal diseases and probiotic delivery.

Formulation optimization of a probiotic low-calorie chocolate milk and investigating its qualitative properties during storage

Due to concern regarding the consumption of high amount of sugar in diet and role of diet in combating overweigh and related disease, the aim of present study was to optimize a reduced calorie probiotic chocolate milk formula with suitable physicochemical properties. The formula comprising inulin, stevia (Stevia rebaudiana Bertoni), chia (Salvia hispanica L.) seed gum (CSG), and whey protein concentrate (WPC) which optimized using Box-Behnken design (BBD) and then enriched with an encapsulated probiotic strain Lactobacillus acidophilus (DSM1643). The independent variables included inulin (2-8%), CSG (0.1-0.5 %), stevia (50-100 % replacement of sugar), and WPC (1-3%). The dependent variables were selected as viscosity, average particle size, sedimentation percentage, and general acceptance. Optimization done toward achieving the highest viscosity and general acceptance and the lowest sedimentation percentage and average particle size. The optimal conditions were found to be 7.99 % inulin, 70 % stevia, 0.34 % CSG, and 1 % WPC. Under these conditions, the viscosity, sedimentation percentage, average particle size, and general acceptance of the product were equal to 40.69 mPa s, 2.2 %, 434.221 nm, and 5.1, respectively. Next, the chocolate milk was enriched with at 109 CFU/g probiotic bacteria and evaluated. The probiotic strain was resistant to simulated gastrointestinal conditions and under this condition the free bacterial cells count declined by 8 logCFU/g while the encapsulated cells decreased approximate 3 logCFU/g. The bacteria count did not undergo a significant change until the 5th day of storage. The results showed that the inulin, stevia, CSG, and WPC at optimal concentrations and encapsulated probiotic bacteria could be simultaneously applied to produce a product with good properties. This formula could be considered as a new product with health improving properties, low calorie which is suitable for people suffering from diabetes and obesity.

Effect of Goji Berry extract on cell viability of Lactiplantibacillus plantarum M5 microcapsules during in vitro gastrointestinal digestion

Lactiplantibacillus plantarum M5 and Goji Berry extract were co-microencapsulated to maintain the activity of cells during gastrointestinal digestion, and the mechanism by which they could maintain high activity was investigated. The results showed that the microcapsules with 3% Goji Berry extract(A-GE-3) had the largest encapsulation efficiency(EE) of 92.41 ± 0.58%. SEM showed that the structure of A-GE-3 microcapsules were smoother and denser. Cell viability in A-GE-3 microcapsules remained at 7.17 log10 CFU/g after gastrointestinal digestion. Meanwhile, during the gastrointestinal digestion with 3% Goji Berry extract, cell membrane damage detected by fluorescent probes propidium iodide(PI) and 1.1-N-phenylnaphthylamine(NPN) was significantly reduced; the contents of arginine, glutamic acid and oleic acid in cell membrane were increased, which helped to maintain the dynamic balance of intracellular pH and regulated cell membrane fluidity in response to gastrointestinal environment. This study demonstrated the potential of Goji Berry extract as a probiotic protector in gastrointestinal digestion.

Revolutionizing lung health: Exploring the latest breakthroughs and future prospects of synbiotic nanostructures in lung diseases

The escalating prevalence of lung diseases underscores the need for innovative therapies. Dysbiosis in human body microbiome has emerged as a significant factor in these diseases, indicating a potential role for synbiotics in restoring microbial equilibrium. However, effective delivery of synbiotics to the target site remains challenging. Here, we aim to explore suitable nanoparticles for encapsulating synbiotics tailored for applications in lung diseases. Nanoencapsulation has emerged as a prominent strategy to address the delivery challenges of synbiotics in this context. Through a comprehensive review, we assess the potential of nanoparticles in facilitating synbiotic delivery and their structural adaptability for this purpose. Our review reveals that nanoparticles such as nanocellulose, starch, and chitosan exhibit high potential for synbiotic encapsulation. These offer flexibility in structure design and synthesis, making them promising candidates for addressing delivery challenges in lung diseases. Furthermore, our analysis highlights that synbiotics, when compared to probiotics alone, demonstrate superior anti-inflammatory, antioxidant, antibacterial and anticancer activities. This review underscores the promising role of nanoparticle-encapsulated synbiotics as a targeted and effective therapeutic approach for lung diseases, contributing valuable insights into the potential of nanomedicine in revolutionizing treatment strategies for respiratory conditions, ultimately paving the way for future advancements in this field.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Polysaccharides and proteins-based bionanocomposites for microencapsulation of probiotics to improve stability and viability in the gastrointestinal tract: A review

Probiotics have recently received significant attention due to their various benefits, such as the modulation of gut flora, reduction of blood sugar and insulin resistance, prevention and treatment of digestive disorders, and strengthening of the immune system. One of the major issues concerning probiotics is the maintenance of their viability in the presence of digestive conditions and extended shelf life during storage. To address this concern, numerous techniques have been explored to achieve success. Among these methods, the microencapsulation of probiotics has been proposed as the most effective way to overcome this challenge. The combination of nanomaterials with biopolymer coating is considered a novel approach to improve its viability and effective delivery. The use of polysaccharides and proteins-based bionanocomposites for microencapsulation of probiotics has emerged as an efficient and promising approach for maintaining cell viability and targeted delivery. This review article aims to investigate the use of different bionanocomposites in microencapsulation of probiotics and their effect on cell survival in long-term storage and harsh conditions in the gastrointestinal tract.

Development and application of fruit and vegetable based green films with natural bio-actives in meat and dairy products: a review

In recent years, foodborne outbreaks and food plastic waste accumulation in the environment have impelled a hunt for new, sustainable, novel and innovatory food packaging interventions to face microbial contamination, food quality and safety. Pollution caused from wastes generated by agricultural activities is one of chief rising concerns of the environmentalists across the globe. A solution to this problem is effective and economic valorization of residues from agriculture sector. It would ensure that the by-products/residues from one activity act as ingredients/raw materials for another industry. An example is fruit and vegetable waste based green films for food packaging. Edible packaging is a well-researched area of science where numerous biomaterials have been already explored. Along with dynamic barrier properties, these biofilms often exhibit antioxidant and antimicrobial properties as function of the bioactive additives (e.g. essential oils) often incorporated in them. Additionally, these films are made competent by use of recent technologies (e.g. encapsulation, nano-emulsions, radio-sensors) to ensure high end performance and meet the principles of sustainability. Livestock products such as meat, poultry and dairy products are highly perishable and depend largely upon the mercy of packaging materials to enhance their shelf life. In this review, all the above-mentioned aspects are thoroughly covered with a view to project fruit and vegetable based green films (FVBGFs) as a potential and viable packaging material for livestock products, along with a discussion on role of bio-additives, technological interventions, properties and potential applications of FVBGFs in livestock products. © 2023 Society of Chemical Industry.

Nanocoating of lactic acid bacteria: properties, protection mechanisms, and future trends

Lactic acid bacteria (LAB) is a type of probiotic that may benefit intestinal health. Recent advances in nanoencapsulation provide an effective strategy to protect them from harsh conditions via surface functionalization coating techniques. Herein, the categories and features of applicable encapsulation methods are compared to highlight the significant role of nanoencapsulation. Commonly used food-grade biopolymers (polysaccharides and protein) and nanomaterials (nanocellulose and starch nanoparticles) are summarized along with their characteristics and advances to demonstrate enhanced combination effects in LAB co-encapsulation. Nanocoating for LAB provides an integrity dense or smooth layer attributed to the cross-linking and assembly of the protectant. The synergism of multiple chemical forces allows for the formation of subtle coatings, including electrostatic attractions, hydrophobic interactions, π-π, and metallic bonds. Multilayer shells have stable physical transition properties that could increase the space between the probiotic cells and the outer environment, thus delaying the microcapsules burst time in the gut. Probiotic delivery stability can be promoted by enhancing the thickness of the encapsulated layer and nanoparticle binding. Maintenance of benefits and minimization of nanotoxicity are desirable, and green synthesized nanoparticles are emerging. Future trends include optimized formulation, especially using biocompatible materials, protein or plant-based materials, and material modification.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

The Effect of Encapsulating a Prebiotic-Based Biopolymer Delivery System for Enhanced Probiotic Survival

Orally delivered probiotics must survive transit through harsh environments during gastrointestinal (GI) digestion and be delivered and released into the target site. The aim of this work was to evaluate the survivability and delivery of gel-encapsulated Lactobacillus rhamnosus GG (LGG) to the colon. New hybrid symbiotic beads alginate/prebiotic pullulan/probiotic LGG were obtained by the extrusion method. The average size of the developed beads was 3401 µm (wet), 921 µm (dry) and the bacterial titer was 109 CFU/g. The morphology of the beads was studied by a scanning electron microscope, demonstrating the structure of the bacterial cellulose shell and loading with probiotics. For the first time, we propose adding an enzymatic extract of feces to an artificial colon fluid, which mimics the total hydrolytic activity of the intestinal microbiota. The beads can be digested by fecalase with cellulase activity, indicating intestinal release. The encapsulation of LGG significantly enhanced their viability under simulated GI conditions. However, the beads, in combination with the prebiotic, provided greater protection of bacteria, enhancing their survival and even increasing cell numbers in the capsules. These data suggest the promising prospects of coencapsulation as an innovative delivery method based on the inclusion of probiotic bacteria in a symbiotic matrix.

Nanotechnology impacting probiotics and prebiotics: a paradigm shift in nutraceuticals technology

This is proven for a long that the incorporation of probiotics and prebiotics in diet exhibits beneficial effects on intestinal and intrinsic health. Nevertheless, this may encounter loss of vitality all along the absorption in the gastrointestinal tract, leading to meager intestinal delivery of probiotic active ingredients. In recent times, nanotechnology has been passionately used to escalate the bioavailability of active ingredients. Versatile forms of nanoparticles (NPs) are devised to be used with probiotics/prebiotics/synbiotics or their different combinations. The NPs currently in trend are constituted of distinctive organic compounds like carbohydrates, proteins, fats, or inorganics such as oxides of silver and titanium or magnesium etc. This review critically explicates the emerging relationship of nanotechnology with probiotics and prebiotics for different applications in neutraceuticals. Here in this review, formulations of nanoprobiotics and nanoprebiotics are discussed in detail, which behave as an effective drug delivery system. In addition, these formulations exhibit anti-cancerous, anti-microbial, anti-oxidant and photo-protective properties. Limited availability of scientific research on nanotechnology concerning probiotics and prebiotics implies dynamic research studies on the bioavailability of loaded active ingredients and the effective drug delivery system by including the safety issues of food and the environment.

Whey protein hydrolysates as prebiotic and protective agent regulate growth and survival of Lactobacillus rhamnosus CICC22152 during spray/freeze-drying, storage and gastrointestinal digestion

BACKGROUND

Probiotic products are receiving increasing attention because of their tremendous beneficial health effects. However, it is still a great challenge to preserve probiotic viability during processing, storage and gastrointestinal digestion. Encapsulation is a widely known technology for enhancing bacterial viability and product stability. Hence highly hydrolyzed whey protein hydrolysate (HWPH) and moderately hydrolyzed whey protein hydrolysate (MWPH) used as a one-step culture medium and wall material for Lactobacillus rhamnosus were investigated.

RESULTS

H/MWPH-substitutive medium for the growth of Lactobacillus rhamnosus presented double the biomass production compared to other media. The H/MWPH-substitutive medium in combination with freeze drying also led to the highest survival ratio (97.13 ± 9.16%) and cell viability (10.62 log CFU g^-1 ). The highest survival rate of spray-dried cells was 85.56 ± 7.4%. In addition, the cell viability of spray-dried Lactobacillus rhamnosus with MWPH as culture and dry medium was 0.79 log CFU g^-1 higher than that of HWPH. Images confirmed that spray-dried Lactobacillus rhamnosus in MWPH provided better protection and it showed greater sustained viability after gastrointestinal digestion.

CONCLUSION

Overall, WPH just as carrier provides better thermal protection and MWPH is a preferable two-in-one medium for probiotics. © 2022 Society of Chemical Industry.

Polysaccharide-based porous biopolymers for enhanced bioaccessibility and bioavailability of bioactive food compounds: Challenges, advances, and opportunities

Bioactive food compounds, such as lycopene, curcumin, phytosterols, and resveratrol, have received great attention due to their potential health benefits. However, these bioactive compounds (BCs) have poor chemical stability during processing and low bioavailability after consumption. Several delivery systems have been proposed for enhancing their stability and bioavailability. Among these methods, porous biopolymers have emerged as alternative encapsulation materials, as they have superior properties like high surface area, porosity, and tunable surface chemistry to entrap BCs. This reduces the crystallinity (especially for the lipophilic ones) and particle size, and in turn, increases solubilization and bioavailability. Also, loading BCs into the porous matrix can protect them against environmental stresses such as light, heat, oxygen, and pH. This review introduces polysaccharide-based porous biopolymers for improving the bioaccessibility/bioavailability of bioactive food compounds and discusses their recent applications in the food industry. First, bioaccessibility and bioavailability are described with a special emphasis on the factors affecting them. Then, porous biopolymer fabrication methods, including supercritical carbon dioxide (SC-CO₂ ) drying, freeze-drying, and electrospinning and electrospraying, are thoroughly discussed. Finally, common polysaccharide-based biopolymers (i.e., starch, nanocellulose, alginate, and pectin) used for generating porous materials are reviewed, and their current and potential future food applications are critically discussed.

The encapsulation strategy to improve the survival of probiotics for food application: From rough multicellular to single-cell surface engineering and microbial mediation

The application of probiotics is limited by the loss of survival due to food processing, storage, and gastrointestinal tract. Encapsulation is a key technology for overcoming these challenges. The review focuses on the latest progress in probiotic encapsulation since 2020, especially precision engineering on microbial surfaces and microbial-mediated role. Currently, the encapsulation materials include polysaccharides and proteins, followed by lipids, which is a traditional mainstream trend, while novel plant extracts and polyphenols are on the rise. Other natural materials and processing by-products are also involved. The encapsulation types are divided into rough multicellular encapsulation, precise single-cell encapsulation, and microbial-mediated encapsulation. Recent emerging techniques include cryomilling, 3D printing, spray-drying with a three-fluid coaxial nozzle, and microfluidic. Encapsulated probiotics applied in food is an upward trend in which "classic probiotic foods" (yogurt, cheese, butter, chocolate, etc.) are dominated, supplemented by "novel probiotic foods" (tea, peanut butter, and various dry-based foods). Future efforts mainly include the effect of novel encapsulation materials on probiotics in the gut, encapsulation strategy oriented by microbial enthusiasm and precise encapsulation, development of novel techniques that consider both cost and efficiency, and co-encapsulation of multiple strains. In conclusion, encapsulation provides a strong impetus for the food application of probiotics.

Encapsulation of Vitamin B12 by Complex Coacervation of Whey Protein Concentrate-Pectin; Optimization and Characterization

Vitamin B12 (VB12) is one of the essential vitamins for the body, which is sensitive to light, heat, oxidizing agents, and acidic and alkaline substances. Therefore, the encapsulation of VB12 can be one of the ways to protect it against processing and environmental conditions in food. In this work, the influence of pectin concentration (0.5−1% w/v), whey protein concentrate (WPC) level (4−8% w/v) and pH (3−9) on some properties of VB12-loaded pectin−WPC complex carriers was investigated by response surface methodology (RSM). The findings showed that under optimum conditions (1:6.47, pectin:WPC and pH = 6.6), the encapsulation efficiency (EE), stability, viscosity, particle size and solubility of complex carriers were 80.71%, 85.38%, 39.58 mPa·s, 7.07 µm and 65.86%, respectively. Additionally, the formation of complex coacervate was confirmed by Fourier-transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM). In addition, it was revealed that the most important factor in VB12 encapsulation was pH; at a pH < isoelectric point of WPC (pH = 3), in comparison with higher pH values (6 and 9), a stronger complex was formed between pectin and WPC, which led to an increase in EE, lightness parameter, particle size and water activity, as well as a decrease in the zeta-potential and porosity of complex carriers.

Preparation and Characteristics of Alginate Microparticles for Food, Pharmaceutical and Cosmetic Applications

Alginates are the most widely used natural polymers in the pharmaceutical, food and cosmetic industries. Usually, they are applied as a thickening, gel-forming and stabilizing agent. Moreover, the alginate-based formulations such as matrices, membranes, nanospheres or microcapsules are often used as delivery systems. Alginate microparticles (AMP) are biocompatible, biodegradable and nontoxic carriers, applied to encapsulate hydrophilic active substances, including probiotics. Here, we report the methods most frequently used for AMP production and encapsulation of different actives. The technological parameters important in the process of AMP preparation, such as alginate concentration, the type and concentration of other reagents (cross-linking agents, oils, emulsifiers and pH regulators), agitation speed or cross-linking time, are reviewed. Furthermore, the advantages and disadvantages of alginate microparticles as delivery systems are discussed, and an overview of the active ingredients enclosed in the alginate carriers are presented.

Characteristics of Probiotic Preparations and Their Applications

The probiotics market is one of the fastest growing segments of the food industry as there is growing scientific evidence of the positive health effects of probiotics on consumers. Currently, there are various forms of probiotic products and they can be categorized according to dosage form and the site of action. To increase the effectiveness of probiotic preparations, they need to be specifically designed so they can target different sites, such as the oral, upper respiratory or gastrointestinal tracts. Here we review the characteristics of different dosage forms of probiotics and discuss methods to improve their bioavailability in detail, in the hope that this article will provide a reference for the development of probiotic products.

Layer-by-Layer Coating of Single-Cell Lacticaseibacillus rhamnosus to Increase Viability Under Simulated Gastrointestinal Conditions and Use in Film Formation

Probiotics and prebiotics are widely used as functional food ingredients. Viability of probiotics in the food matrix and further in the digestive system is still a challenge for the food industry. Different approaches were used to enhance the viability of probiotics including microencapsulation and layer-by-layer cell coating. The of aim of this study was to evaluate the viability of coated Lacticaseibacillus rhamnosus using a layer-by-layer (LbL) technique with black seed protein (BSP) extracted from Nigella sativa defatted seeds cakes (NsDSC), as a coating material, with alginate, inulin, or glucomannan, separately, and the final number of coating layers was 3. The viable cell counts of the plain and coated L. rhamnosus were determined under sequential simulated gastric fluid (SGF) for 120 min and simulated intestinal fluid (SIF) for 180 min. Additionally, the viability after exposure to 37, 45, and 55°C for 30 min was also determined. Generally, the survivability of coated L. rhamnosus showed significant (p ≤ 0.05) improvement (<4, 3, and 1.5 logs reduction for glucomannan, alginate and inulin, respectively) compared with plain cells (∼6.7 log reduction) under sequential exposure to SGF and SIF. Moreover, the cells coated with BSP and inulin showed the best protection for L. rhamnosus under high temperatures. Edible films prepared with pectin with LbL-coated cells showed significantly higher values in their tensile strength (TS) of 50% and elongation at the break (EB) of 32.5% than pectin without LbL-coated cells. The LbL technique showed a significant protection of probiotic cells and potential use in food application.

The assessment of microencapsulated Lactobacillus plantarum survivability in rose petal jam and the changes in physicochemical, textural and sensorial characteristics of the product during storage

The present study aimed to develop a probiotic rose petal jam containing microencapsulated L. plantarum. The attributes of L. plantarum microcapsules and bacteria viability in simulated gastrointestinal conditions and jam were assessed. In addition, L. plantarum effects on physicochemical, textural and sensorial properties of jam were studied. The microencapsulation yield, diameter, and zeta potential value of the microcapsules ranged from 90.23 to 92.75%, 14.80–35.02 µm, and − 16.83 to − 14.71 mV, respectively. The microencapsulation process significantly increases the survival of L. plantarum in simulated gastrointestinal tract and jam. In jam samples containing L. plantarum microencapsulated with 2% sodium alginate and 3.5% or 5% Arabic gum and stored for 90 days, the bacterial count was higher than the acceptable level (10⁶ CFU/g). While there was no significant difference (P > 0.05) between physicochemical characteristics of non-probiotic and probiotic jams, taste and overall acceptance scores of microencapsulated probiotic jams were higher. The microencapsulation of L. plantarum in sodium alginate (2%) and Arabic gum (5%) and its inoculation into rose petal jam could yield a new probiotic product with increased health benefits.

Encapsulation of probiotics: past, present and future

Background

Probiotics are live microbial supplements known for its health benefits. Consumption of probiotics reported to improve several health benefits including intestinal flora composition, resistance against pathogens. In the recent years, there is an increasing trend of probiotic-based food products in the market.

Main body

Probiotics cells are targeted to reach the large intestine, and the probiotics must survive through the acidic conditions of the gastric environment. It is recommended to formulate the probiotic bacteria in the range of 108–109 cfu/g for consumption and maintain the therapeutic efficacy of 106–107 cfu/g in the large intestine. During the gastrointestinal transit, the probiotics will drastically lose its viability in the gastric environment (pH 2). Maintaining cell viability until it reaches the large intestine remains challenging task. Encapsulating the probiotics cells with suitable wall material helps to sustain the survival of probiotics during industrial processing and in gastrointestinal transit. In the encapsulation process, cells are completely enclosed in the wall material, through different techniques including spray drying, freeze drying, extrusion, spray freeze drying, emulsification, etc. However, spray-drying and freeze-drying techniques are successfully used for the commercial formulation; thus, we limited to review those encapsulation techniques.

Short conclusions

The survival rate of spray-dried probiotics during simulated digestion mainly depends on the inlet air temperature, wall material and exposure in the GI condition. And fermentation, pH and freeze-drying time are the important process parameters for maintaining the viability of bacterial cells in the gastric condition. Improving the viability of probiotic cells during industrial processing and extending the cell viability during storage and digestion will be the main concern for successful commercialization.

Graphical abstract

Efficacy of the incorporation between self-encapsulation and cryoprotectants on improving the freeze-dried survival of probiotic bacteria

AIMS

This study aimed to improve the viability of probiotic bacteria during freeze-drying by the combination of self-encapsulation and cryoprotectants.

METHODS AND RESULTS

Lactiplantibacillus plantarum VAL6 and Lactobacillus acidophilus VAR1 were exposed to environmental stresses including temperature, pH, and increased CO₂ concentration before performing freeze-drying with the addition of cryoprotectants. The results proved that tested stresses can stimulate the bacteria to synthesize more extracellular polymeric substances to form self-encapsulation that increases their freeze-dried viability. In combination with cryoprotectants to form double-layered microencapsulation, L. plantarum VAL6 stressed at pH 3.5 in combination with whey protein isolate could achieve the highest Improving Cell Viability of 4,361 fold, while L. acidophilus VAR1 stressed at 25^o C in combination with alginate gave a maximum Improving Cell Viability of 73.33 fold.

CONCLUSIONS

The combination of self-encapsulation and cryoprotectants significantly improves the freeze-dried viability of probiotics.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report that uses environmental stress to stimulate EPS synthesis for self-encapsulation formation combined with the addition of cryoprotectants to enhance to the freeze-dried survival of probiotics. This could be a novel approach in improving the viability of probiotic strains for various applications.

Physicochemical and Functional Characterization of Newly Designed Biopolymeric-Based Encapsulates with Probiotic Culture and Charantin

The identification of novel sources of synbiotic agents with desirable functionality is an emerging concept. In the present study, novel encapsulates containing probiotic L. acidophilus LA-05^® (LA) and Charantin (CT) were produced by freeze-drying technique using pure Whey Protein Isolate (WPI), pure Maltodextrin (MD), and their combination (WPI + MD) in 1:1 core ratio, respectively. The obtained microparticles, namely WPI + LA + CT, MD + LA + CT, and WPI + MD + LA + CT were tested for their physicochemical properties. Among all formulations, combined carriers (WPI + MD) exhibited the highest encapsulation yields for LA (98%) and CT (75%). Microparticles showed a mean d (4, 3) ranging from 50.393 ± 1.26 to 68.412 ± 3.22 μm. The Scanning Electron Microscopy revealed uniformly amorphous and glass-like structures, with a noticeably reduced porosity when materials were combined. In addition, Fourier Transform Infrared spectroscopy highlighted the formation of strong hydrogen bonds supporting the interactions between the carrier materials (WPI and MD) and CT. In addition, the thermal stability of the combined WPI + MD was superior to that of pure WPI and pure MD, as depicted by the Thermogravimetric and Differential Scanning Calorimetry analysis. More interestingly, co-encapsulation with CT enhanced LA viability (8.91 ± 0.3 log CFU/g) and Cells Surface Hydrophobicity (82%) in vitro, in a prebiotic-like manner. Correspondingly, CT content was heightened when co-encapsulated with LA. Besides, WPI + MD + LA + CT microparticles exhibited higher antioxidant activity (79%), α-amylase inhibitory activity (83%), and lipase inhibitory activity (68%) than single carrier ones. Furthermore, LA viable count (7.95 ± 0.1 log CFU/g) and CT content (78%) were the highest in the blended carrier materials after 30 days of storage at 4 °C. Synbiotic microparticle WPI + MD + LA + CT represents an effective and promising approach for the co-delivery of probiotic culture and bioactive compounds in the digestive tract, with enhanced functionality and storage properties.

Application of Encapsulation Technology in Edible Films: Carrier of Bioactive Compounds

Nutraceuticals, functional foods, immunity boosters, microcapsules, nanoemulsions, edible packaging, and safe food are the new progressive terms, adopted to describe the food industry. Also, the rising awareness among the consumers regarding these has created an opportunity for the food manufacturers and scientists worldwide to use food as a delivery vehicle. Packaging performs a very imminent role in the food supply chain as well as it is a consequential part of the process of food manufacturing. Edible packaging is a swiftly emerging art of science in which edible biopolymers like lipids, polysaccharides, proteins, resins, etc. and other consumable constituents extracted from various non-conventional sources like microorganisms are used alone or imbibed together. These edible packaging are indispensable and are meant to be consumed with the food. This shift in paradigm from traditional food packaging to edible, environment friendly, delivery vehicles for bioactive compounds have opened new avenues for the packaging industry. Bioactive compounds imbibed in food systems are gradually degenerated, or may change their properties due to internal or external factors like oxidation reactions, or they may react with each other thus reducing their bioavailability and ultimately may result in unacceptable color or flavor. A combination of novel edible food-packaging material and innovative technologies can serve as an excellent medium to control the bioavailability of these compounds in food matrices. One promising technology for overcoming the aforesaid problems is encapsulation. It can be used as a method for entrapment of desirable flavors, probiotics, or other additives in order to apprehend the impediments of the conventional edible packaging. This review explains the concept of encapsulation by exploring various encapsulating materials and their potential role in augmenting the performance of edible coatings/films. The techniques, characteristics, applications, scope, and thrust areas for research in encapsulation are discussed in detail with focus on development of sustainable edible packaging.

Microencapsulation of Lactobacillus acidophilus LA-5 and Bifidobacterium animalis BB-12 in pectin and sodium alginate: A comparative study on viability, stability, and structure

The present study aimed at examining whether the microencapsulation of Lactobacillus acidophilus LA-5 and Bifidobacterium animalis BB-12 inside hydrogels could prolong their survival in freeze-drying conditions, stored at 4℃ and in the gastrointestinal medium. Microencapsulation was performed by emulsion with a syringe, while sodium alginate and high methoxyl pectin were used as a carrier material. A relatively high efficiency of encapsulation was obtained (>92%). Z-Average and pdI in samples were not significant (p < .05). In different treatments, changes in the number of bacteria after freeze-drying, 30 days of storage, and gastrointestinal conditions, compared to each other, were significant (p < .05). However, the survival rate after a reduction during storage was higher than 106 cfu/g, indicating the suitability of the microencapsulation process. The surface of microcapsules observed by a scanning electron microscope (SEM) confirmed the success of encapsulation. Finally, a lower decrease in the count of microencapsulated was observed in comparison to the free cells.

Co-Encapsulated Synbiotics and Immobilized Probiotics in Human Health and Gut Microbiota Modulation

Growing interest in the development of innovative functional products as ideal carriers for synbiotics, e.g., nutrient bars, yogurt, chocolate, juice, ice cream, and cheese, to ensure the daily intake of probiotics and prebiotics, which are needed to maintain a healthy gut microbiota and overall well-being, is undeniable and inevitable. This review focuses on the modern approaches that are currently being developed to modulate the gut microbiota, with an emphasis on the health benefits mediated by co-encapsulated synbiotics and immobilized probiotics. The impact of processing, storage, and simulated gastrointestinal conditions on the viability and bioactivity of probiotics together with prebiotics such as omega-3 polyunsaturated fatty acids, phytochemicals, and dietary fibers using various delivery systems are considered. Despite the proven biological properties of synbiotics, research in this area needs to be focused on the proper selection of probiotic strains, their prebiotic counterparts, and delivery systems to avoid suppression of their synergistic or complementary effect on human health. Future directions should lead to the development of functional food products containing stable synbiotics tailored for different age groups or specifically designed to fulfill the needs of adjuvant therapy.

Microencapsulation of Lactobacillus rhamnosus ATCC 7469 by spray drying using maltodextrin, whey protein concentrate and trehalose

This study aimed to microencapsulate Lactobacillus rhamnosus (L. rhamnosus) ATCC 7469 with whey protein concentrate (WPC), maltodextrin and trehalose by spray drying and to assess the impact of microencapsulation on cell viability and the properties of the dried powders. Spray-drying conditions, including inlet air temperature, air flow rate and feed pump, were fixed as independent variables, while probiotic survival, moisture content, water activity and effective yield were established as dependent variables. The survival of encapsulated L. rhamnosus by spray drying was optimized with response surface methodology, and the stability of the powder was assessed. The optimum spray-drying conditions were an inlet air temperature, air flow rate and feed pump rate of 169 °C, 33 m³·h^-1 and 16 mL·min^-1, respectively, survival of 70%, air aspiration of 84% and outlet air temperature of 52 °C, achieving an overall desirability of 0.96. The physicochemical and structural characteristics of the produced powder were acceptable for application with regard to residual water content, hygroscopicity, water activity, and particle size. The results indicated that a protein-trehalose-maltodextrin mixture is a good wall material to encapsulate L. rhamnosus, showing important thermal protection during the drying process and increasing survival. However, a decrease in this capacity is observed at an air outlet temperature of approximately 101 °C. The possible effects of the wall materials and the drying conditions on survival are also discussed.

Nanomaterial-based encapsulation for controlled gastrointestinal delivery of viable probiotic bacteria

Probiotics are microorganisms that have beneficial health effects when administered in adequate dosages. The oral administration of probiotic bacteria is widely considered beneficial for both intestinal as well as systemic health but its clinical efficacy is conflicted in the literature. This may at least in part be due to the loss of viability during gastrointestinal passage resulting in poor intestinal delivery. Microencapsulation technology has been proposed as a successful strategy to address this problem by maintaining the viability of probiotics, thereby improving their efficacy following oral administration. More recently, nanomaterials have demonstrated significant promise as encapsulation materials to improve probiotic encapsulation. The integration of nanotechnology with microencapsulation techniques can improve the controlled delivery of viable probiotic bacteria to the gut. The current review aims at summarizing the types of nanomaterials used for the microencapsulation of probiotics and showing how they can achieve the delivery and controlled release of probiotics at the site of action.

Preparation of Spray-Dried Functional Food: Effect of Adding Bacillus clausii Bacteria as a Co-Microencapsulating Agent on the Conservation of Resveratrol

The effect of bacteria (Bacillus clausii) addition on the culturability and antioxidant activity of resveratrol prepared by spray drying was studied in this work. Inulin and lactose were employed as carrying agents and their performance compared. Resveratrol microencapsulated in inulin showed the highest antioxidant activity (26%) against free radicals. The co-encapsulated materials (bacteria and resveratrol) in inulin and lactose showed similar activities (21%, and 23%, respectively) suggesting that part of resveratrol was absorbed by the bacteria. Particles showed a regular spherical morphology with smooth surfaces, and size in the micrometer range (2–25 μm). The absence of bacteria in the SEM micrographs and the culturability activity suggested the preservation of the organisms within the micro and co-microencapsulated particles. The present work proposes the preparation of a functional food with probiotic and antioxidant properties.