A novel approach for resistant starch production from green banana flour using amylopullulanase

Green banana resistant starch: A promising potential as functional ingredient against certain maladies

This review covers the significance of green banana resistant starch (RS), a substantial polysaccharide. The food industry has taken an interest in green banana flour due to its 30% availability of resistant starch and its approximately 70% starch content on a dry basis, making its use suitable for food formulations where starch serves as the base. A variety of processing techniques, such as heat-moisture, autoclaving, microwaving, high hydrostatic pressure, extrusion, ultrasound, acid hydrolysis, and enzymatic debranching treatments, have made significant advancements in the preparation of resistant starch. These advancements aim to change the structure, techno-functionality, and subsequently the physiological functions of the resistant starch. Green bananas make up the highest RS as compared to other foods and cereals. Many food processing industries and cuisines now have a positive awareness due to the functional characteristics of green bananas, such as their pasting, thermal, gelatinization, foaming, and textural characteristics. It is also found useful for controlling the rates of cancer, obesity, and diabetic disorders. Moreover, the use of GBRS as prebiotics and probiotics might be significantly proved good for gut health. This study aimed at the awareness of the composition, extraction and application of the green banana resistant starch in the future food products.

Preparation of Resistant Starch Types III + V with Moderate Amylopullulanase and Its Effects on Bread Properties

The potential of PulY103A (a moderate amylopullulanase originating from Bacillus megaterium) for resistant starch production under moderate conditions (40 °C; a pH of 6.5) was investigated. PulY103A was much more suitable for pea resistant starch production with a high growth rate of 3.63. The pea resistant starch (PSpa) produced with PulY103A had lower levels of swelling power and solubility and a better level of thermostability than native pea starch (PSn) and autoclaved PS (PSa). The starch crystallinity pattern was B + V, which indicated that the PSpa belonged to RS types III + V. In addition, PSpa was used for breadmaking. The results showed that the bread quality was not significantly influenced compared to the control group when the content of PSpa was under 10% (p > 0.05). The bread supplemented with 10% PSpa had a significantly increased TDF content compared to that of the control (p < 0.05). Moreover, the in vitro mineral bioavailability of the bread sample was influenced gently compared to other dietary fibers, and the bread sample changed from a high-glycemic-index (GI) food to a medium-GI food corresponding to white bread at the same concentration of PSpa. These results indicated that PSpa is a good candidate for the production of dietary foods.

Physicochemical changes and in vitro digestibility of three banana starches at different maturity stages

This study aimed to compare the changes in physicochemical properties of the starch isolated from three banana cultivars (Musa AAA group, Cavendish subgroup; Musa ABB group, Pisang Awak subgroup; Musa AA group, Huangdijiao subgroup) at five different maturity stages. The results revealed both similarities and significant differences in micromorphology and physicochemical characteristics of the three banana varieties during different growth stages. Apparent amylose content and particle size of the three starches increased with the ripeness of banana. Light microscopy and scanning electron microscopy revealed that starch particles of the three starches had different microscopic characteristics, and that banana starch morphology was basically unchanged at various growth stages. Moreover, the pasting and thermal properties of the banana starches were significantly different at various growth stages. The resistant starch content of the three banana cultivars was about 80% at all growth stages. Musa AAA group, Cavendish subgroup had the highest resistant starch content at stage Ⅴ. This study provides insights into the starch changes of three banana cultivars during ripening.

The Screening and Identification of a Dextranase-Secreting Marine Actinmycete Saccharomonospora sp. K1 and Study of Its Enzymatic Characteristics

In this study, an actinomycete was isolated from sea mud. The strain K1 was identified as Saccharomonospora sp. by 16S rDNA. The optimal enzyme production temperature, initial pH, time, and concentration of the inducer of this actinomycete strain K1 were 37 °C, pH 8.5, 72 h, and 2% dextran T20 of medium, respectively. Dextranase from strain K1 exhibited maximum activity at 8.5 pH and 50 °C. The molecular weight of the enzyme was <10 kDa. The metal ions Sr2+ and K+ enhanced its activity, whereas Fe3+ and Co2+ had an opposite effect. In addition, high-performance liquid chromatography showed that dextran was mainly hydrolyzed to isomaltoheptose and isomaltopentaose. Also, it could effectively remove biofilms of Streptococcus mutans. Furthermore, it could be used to prepare porous sweet potato starch. This is the first time a dextranase-producing actinomycete strain was screened from marine samples.

Exploring the effects of enzymatic and thermal treatments on banana starch characteristics

Banana starch has a highly resistant starch (RS) and slow-digested starch (SDS) content, making it attractive as a functional ingredient. Unfortunately, banana starch requires modification processes due to the loss of RS and SDS during gelatinization because of its thermolabile characteristics. This study explores the effect of banana starch modification by enzymatic, heat moisture treatment (HMT) and dual modification (HMT+ enzymatic) on its nutritional (RS, SDS) and functional properties (hydration, structural, gelation, rheological). HMT and dual modifications decrease RS (from 44.62 g/100 g to 16.62 and 26.66 g/100 g, respectively) and increase SDS (from 21.72 g/100 g to 33.91 and 26.95 g/100 g, respectively) in raw starch but induce structural changes that enhance RS (from 3.10 g/100 g to 3.94 and 4.4 g/100 g, respectively) and SDS (from 2.58 g/100 g to 9.58 and 11.48 g/100 g) thermo-resistance in gelled starch. Also, changes in the functional properties of starches were evidenced, such as weaker gels (hardness < 41 g), lower water absorption (<12.35 g/g), high starch solubility (>1.77 g/100 g) and increased gelatinization temperature. Improved gelatinization temperature and RS thermostability resulted from modifications that could expand banana starch applications as a beverage and compote thickener agent.

NADES assisted integrated biorefinery concept for pectin recovery from kinnow (Citrus reticulate) peel and strategic conversion of residual biomass to L(+) lactic acid

The present study aims to establish an integrated strategy for valorization of kinnow peel waste. A total of ten natural deep eutectic solvents (NADESs) were exploited for extraction of pectin. The highest yield of pectin enriched material was reported 35.66 % w/dw using choline chloride-Maltose based NADES. The extraction process parameters and chemical composition of NADES influenced the yield and different associated physico-chemical attributes of the pectin enriched material. All the recovered pectin enriched materials found to be composed of low methoxy pectin (degree of methylation: 18.41-40.26 %) and galacturonic acid (GalA) content was in range of 67.56-78.22 %. The Principal Component Analysis (PCA) was used to categorise isolated pectin enriched materials based on similarities and differences. The liquid fraction upon pectin extraction presented a considerable amount of fermentable sugar which was further utilized for lactic acid production by microbial intervention. The microbial strain Lactobacillus amylophilus GV6 was exploited for lactic acid fermentation where the highest yield reached 55.59 g/L. A sustainable and straight-forward biorefinery concept was developed for extraction of pectin enriched material and lactic acid production from kinnow peel waste with potential application in food and biotechnological sectors.

Green banana biomass (Musa spp.) as a natural food additive in artisanal tomato sauce

This study aimed to prepare artisanal tomato sauce (TSC, control) containing 10% (TS10) or 20% (TS20) of whole green banana biomass (GBB). Tomato sauce formulations were evaluated for storage stability, sensory acceptability, and color and sensory parameters correlations. Data were subjected to Analysis of Variance, followed by the comparison of means by Tukey's test (p < 0.05 and p < 0.01). Correspondence analysis was used to assess the responses to a Check-All-That-Apply questionnaire. A significant effect was observed (p > 0.05) for the interaction between storage time and GBB addition on all physicochemical parameters. GBB reduced titratable acidity and total soluble solids (p < 0.05), possibly because of its high content of complex carbohydrates. All tomato sauce formulations had adequate microbiological quality for human consumption after preparation. Sauce consistency increased with increasing GBB concentrations, improving the sensory acceptance of this attribute. All formulations achieved the minimum threshold for overall acceptability (70%). A thickening effect was observed with the addition of 20% GBB, resulting in significantly (p < 0.05) higher body, higher consistency, and reduced syneresis. TS20 was described as firm, very consistent, light orange in color, and very smooth. The results support the potential of whole GBB as a natural food additive.

Optimization of starch extraction from Amorphophallus paeoniifolius corms using response surface methodology (RSM) and artificial neural network (ANN) for improving yield with tenable chemical attributes

The development of the extraction process for improving the starch yield from unconventional plants is emerging as a topic of interest. In this respect, the present work aimed to optimize the starch extraction from the corms of elephant foot yam (Amorphophallus paeoniifolius) with the help of response surface methodology (RSM) and artificial neural network (ANN). The RSM model performed better than the ANN in predicting the starch yield with higher precision. In this connection, this study for the first time reports the significant improvement of starch yield from A. paeoniifolius (51.76 g/100 g of the corm dry weight). The extracted starch samples based on yield - high (APHS), medium (APMS), and low (APLS) exhibited a variable granule size (7.17-14.14 μm) along with low ash content, moisture content, protein, and free amino acid indicating purity and desirability. The FTIR analysis also confirmed the chemical composition and purity of the starch samples. Moreover, the XRD analysis showed the prevalence of C-type starch (2θ = 14.303°). Based on other physicochemical, biochemical, functional, and pasting properties, the three starch samples showed more or less similar characteristics thereby indicating the sustentation of beneficial attributes of starch molecules irrespective of the variation in extraction parameters.

Increase of resistant starch content by hydrolysis of potato amylopectin and its microstructural studies by 2D and 3D imaging

The effect of amylopullulanase treatment on recrystallization behaviour and the formation of resistant starch crystals have been investigated. Extracted potato starch (Solanum tuberosum) has been subjected to the enzymatic assisted bioprocessing without any physical or chemical treatment, where 120 min of incubation, 7 % (v/v) of enzyme and 8 mL/g of water content were found to be optimum to increase the resistant starch content by 41.88 %. The resistant starch crystals showed the characteristic behaviour of B-type allomorph with an increase in 21.32 % crystallinity. The modified crystals portrayed less reduction in actual weight when assessed by thermo-gravimetric analysis. The compact linear arrangement of the linear amylose chains within the crystallized granule of starch has been evidenced by Bright Field Microscopy. The microstructure of the resistant starch crystals showed 33.18 % reduction in porosity when the 3-dimensional structural form was analysed by X-ray micro-Computed Tomography.