Species formed during NO adsorption and NO + O 2 co-adsorption on ceria: A combined FTIR and DFT study

Enhancing Water Tolerance and N2 Selectivity in NH3-SCR Catalysts by Protecting Mn Oxide Nanoparticles in a Silicalite-1 Layer

Mn-based catalysts are promising candidates for eliminating harmful nitrogen oxides (NOx) via selective catalytic reduction with ammonia (NH3-SCR) due to their inherent strong redox abilities. However, poor water tolerance and low N2 selectivity are still the main limitations for practical applications. Herein, we succeeded in preparing an active catalyst for NH3-SCR with improved water tolerance and N2 selectivity based on protecting MnOx with a secondary growth of a hydrophobic silicalite-1. This protection suppressed catalyst deactivation by water adsorption. Interestingly, impregnating MnOx on MesoTS-1 followed by silicalite-1 protection allowed for a higher dispersion of MnOx species, thus increasing the concentration of acid sites. Consequently, the level of N2O formation is decreased. These improvements resulted in a broader operating temperature of NOx conversion and a modification of the NH3-SCR mechanism. Diffuse reflectance infrared Fourier transform spectroscopy analysis revealed that unprotected Mn/MesoTS-1 mainly followed the Eley-Rideal mechanism, while Mn/MesoTS-1@S1 followed both Langmuir-Hinshelwood and Eley-Rideal mechanisms.

Hydroxyls on CeO2 Support Promoting CuO/CeO2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. In this study, we report the preparation and application of a novel CuO/CeO2 catalyst using a hydroxyl-rich Ce(OH)x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO2 support, the new CuO/CeO2 catalyst prepared from the OH-rich Ce(OH)x (CuO/CeO2-OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO2 support on the catalytic performance and physicochemical properties of the CuO/CeO2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuOx dispersion on CeO2, increased the CuOx-CeO2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO2-OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH)x is a superior support for the preparation of highly efficient metal catalysts for different applications.

Comparison of the heterogeneous reaction of NO2 on the surface of clay minerals and desert dust particles

Mineral particles in air could provide atmospheric chemical reaction interface for gaseous substances and participate in atmospheric chemical reaction process, and affecting the status and levels of gaseous pollutants in air. However, differences of the heterogenous reaction on the surface minerals particles are not very clear. Considering main mineral composition of ambient particles was from dust emission, therefore, typical clay minerals (chlorite, illite) and desert particles (Taklimakan Desert) were selected to analysize chemical reaction of NO2, one of major gaseous pollutants, on mineral particles by using of In-situ DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy) under different condition. And In situ near-ambient pressure X-ray photoelectron spectroscopy (In situ NAP-XPS) was employed to investigate iron (one of the major metals) species variation on the surface of mineral dust particles during the heterogeneous reactions. Our data show that humidity controlled by deuterium oxide (D2O) has a greater effect on chemical reactions compared to light and temperature. Under dry conditions, the amount of heterogeneous reaction products of NO2 on the particles shows Xiaotang dust > chlorite > illite > Tazhong dust regardless of dark or light conditions. In contrast, under humidity conditions, the order of nitrate product quantity under moderate conditions was chlorite > illite > Xiaotang dust > Tazhong dust. In situ NAP-XPS results demonstrate that specie variation of the Fe could promote the heterogenous reactions. These data could provide useful information for understanding the formation mechanism of nitrate aerosols and removal of nitrogen oxides in the atmosphere.

Integrated Biochip-Electronic System with Single-Atom Nanozyme for in Vivo Analysis of Nitric Oxide

Nitric oxide (NO) exhibits a crucial role in various versatile and distinct physiological functions. Hence, its real-time sensing is highly important. Herein, we developed an integrated nanoelectronic system comprising a cobalt single-atom nanozyme (Co-SAE) chip array sensor and an electronic signal processing module (IND_Co-SAE) for both in vitro and in vivo multichannel qualifying of NO in normal and tumor-bearing mice. The high atomic utilization and catalytic activity of Co-SAE endowed an ultrawide linear range for NO varying from 36 to 4.1 × 10⁵ nM with a low detection limit of 12 nM. Combining in situ attenuated total reflectance surface enhanced infrared spectroscopy (ATR-SEIRAS) measurements and density function calculation revealed the activating mechanism of Co-SAE toward NO. The NO adsorption on an active Co atom forms *NO, followed by the reaction between *NO and OH^-, which could help design relevant nanozymes. Further, we investigated the NO-producing behaviors of various organs of both normal and tumor-bearing mice using the proposed device. We also evaluated the NO yield produced by the wounded mouse using the designed device and found it to be approximately 15 times that of the normal mouse. This study bridges the technical gap between a biosensor and an integrated system for molecular analysis in vitro and in vivo. The as-fabricated integrated wireless nanoelectronic system with multiple test channels significantly improved the detection efficiency, which can be widely used in designing other portable sensing devices with multiplexed analysis capability.

Electrosynthesis of formamide from methanol and ammonia under ambient conditions

Electrochemical conversion of abundant carbon- and nitrogen-containing small molecules into high-valued organonitrogen compounds is alluring to reducing current dependence on fossil energy. Here we report a single-cell electrochemical oxidation approach to transform methanol and ammonia into formamide under ambient conditions over Pt electrocatalyst that provides 74.26% selectivity from methanol to formamide and a Faradaic efficiency of 40.39% at 100 mA cm-2 current density, gaining an economic advantage over conventional manufacturing based on techno-economic analysis. A 46-h continuous test performed in the flow cell shows no performance decay. The combined results of in situ experiments and theoretical simulations unveil the C-N bond formation mechanism via nucleophilic attack of NH3 on an aldehyde-like intermediate derived from methanol electrooxidation. This work offers a way to synthesize formamide via C-N coupling and can be extended to substantially synthesize other value-added organonitrogen chemicals (e.g., acetamide, propenamide, formyl methylamine).

Nickel-Decorated Mesoporous Iron-Cerium Mixed Oxides: Microstructure and Catalytic Activity in Methanol Decomposition

Nickel-decorated mesoporous cerium-iron oxide composites were synthesized by a combination of incipient wetness impregnation and template-assisted hydrothermal techniques. The effects of the Fe/Ce ratio and the calcination temperature of cerium-iron oxides on the phase composition, texture, structure, and redox properties of the composites were studied by a combination of N₂ physisorption, XRD, high-resolution transmission electron microscopy, SEM, Mössbauer, Raman, XPS, ultraviolet-visible and FTIR spectroscopies, H₂-temperature-programmed reduction, and total oxidation of ethyl acetate as a catalytic test. The combined physicochemical characterization and in situ FTIR investigation of methanol decomposition was used for a proper understanding of the microstructure of the Ni/FeCe oxide composites and the mechanism of the reaction occurring on them. The complex role of the FeCe support in the stabilization of highly dispersed Ni particles, the generation of surface intermediates, and the impact of the support phase transformation under the reaction medium are discussed.

The role of platinum on the NOx storage and desorption behavior of ceria: an online FT-IR study combined with in situ Raman and UV-vis spectroscopy

The role of platinum on the room temperature NOx storage mechanism and the NOx desorption behavior of ceria was investigated by combining online FT-IR gas-phase analysis with in situ Raman and UV-vis spectroscopy. The type of pretreatment, leading to the presence of different platinum states (Pt0, and mixed Pt0/Pt2+), is shown to have a major effect on the NOx storage and desorption properties. Upon loading of ceria with platinum (1 wt%), NOx storage capacities decrease except for reductively pretreated Pt/CeO2, enabling new reaction pathways via activation of gas-phase oxygen. In the absence of oxygen, NO is reduced by metallic platinum leading to N2O and N2 formation. In situ Raman spectra provide mechanistic information, by monitoring changes in ceria surface and subsurface oxygen, as well as PtOx during NOx storage. In the presence of gas-phase oxygen, NOx storage is related to the consumption of (sub)surface oxygen and PtOx, and proposed to involve NO2 or [NO + O2] intermediates reacting with surface oxygen. The NOx desorption behavior is shown to be strongly related to the stored NOx species. Oxidative pretreatment of ceria resulted in the largest amount of stored nitrates, consistent with NOx being mostly desorbed at elevated temperatures, i.e., within 300-500 °C. Reductive pretreatment and/or addition of platinum significantly increased the fraction of stored nitrite, thereby shifting the main NOx desorption temperature to values <300 °C. Storage and subsequent desorption of NOx in PtOx/CeO2 was associated with PtOx reduction and reoxidation, as monitored by in situ UV-vis and Raman spectra. Through detailed analysis we were able to elucidate the influence of platinum on NOx storage/desorption and demonstrate the participation of different platinum states in room temperature NOx storage, with each platinum state opening a distinct new reaction pathway.

Adsorption mechanism of NH3, NO, and O2 molecules over the FexOy/AC catalyst surface: a DFT-D3 study

The surface model of the Fe_xO_y/AC catalyst was constructed and the adsorption mechanism of gas molecules on its surface was revealed.

Structure and reducibility of yttrium-doped cerium dioxide nanoparticles and (111) surface

Using periodic density functional calculations, we studied the local structure and preferred locations of yttrium cations and oxygen vacancies in Y-doped cerium dioxide. We employed three kinds of models – a slab of the CeO₂(111) surface and two ceria nanoparticles of different sizes and shapes. In the slab models, which represent the (111) surface of ceria and the corresponding extended terraces on the facets of its nanoparticles, Y³⁺ cation dopants were calculated to be preferentially located close to each other. They tend to surround a subsurface oxygen vacancy that forms to maintain the charge balance. Such general behavior was not found for the nanoparticle models, in which structural flexibility and the presence of various low-coordinated surface centers seem to be crucial and suppress most of the trends. Configurations with four Y³⁺ cations were calculated to be particularly stable when they combined two of the most stable configurations with two Y³⁺ cations. However, no clear trend was found regarding the preferential spatial distribution of the Y³⁺ pairs – they can be stable both in isolation and close to each other. In general, doping by yttrium does not notably change the reducibility of ceria systems but selectively facilitates the formation of oxygen vacancies at the ceria surface in comparison with pristine ceria. Yttrium cations also slightly increase the basicity of the nearby oxygen centers with respect to a stoichiometric ceria surface.

Energetics and mutual locations of Y³⁺ ion dopants and O vacancies in CeO₂ nanomaterials relevant to catalysis have been studied.