One pot synthesis of bismuth oxide/graphitic carbon nitride composites with high photocatalytic activity

Bismuth drug-inspired ultra-small dextran coated bismuth oxide nanoparticles for targeted computed tomography imaging of inflammatory bowel disease

Bismuth (Bi)-based computed tomography (CT) imaging contrast agents (CAs) hold significant promise for diagnosing gastrointestinal diseases due to their cost-effectiveness, heightened sensitivity, and commendable biocompatibility. Nevertheless, substantial challenges persist in achieving an easy synthesis process, remarkable water solubility, and effective targeting ability for the potential clinical transformation of Bi-based CAs. Herein, we show Bi drug-inspired ultra-small dextran coated bismuth oxide nanoparticles (Bi2O3-Dex NPs) for targeted CT imaging of inflammatory bowel disease (IBD). Bi2O3-Dex NPs are synthesized through a simple alkaline precipitation reaction using bismuth salts and dextran as the template. The Bi2O3-Dex NPs exhibit ultra-small size (3.4 nm), exceptional water solubility (over 200 mg mL-1), high Bi content (19.75 %), excellent biocompatibility and demonstrate higher X-ray attenuation capacity compared to clinical iohexol. Bi2O3-Dex NPs not only enable clear visualization of the GI tract outline and intestinal loop structures in CT imaging but also specifically target and accumulate at the inflammatory site in colitis mice after oral administration, facilitating a precise diagnosis and enabling targeted CT imaging of IBD. Our study introduces a novel and clinically promising strategy for synthesizing high-performance Bi2O3-Dex NPs for diagnosing gastrointestinal diseases.

Strategic rationalization for improved photocatalytic decomposition of toxic pollutants: Immobilizing Bi2Te3 nanorods and V2O5 nanoparticles over MoS2 nanosheets

Researchers have become increasingly interested in solar energy based on semiconductor photocatalysts to remove hazardous pollutants and clean the environment. In this work, an efficient MoS2-Bi2Te3-V2O5 nanocomposite has been prepared through wet impregnation method. MoS2-Bi2Te3-V2O5 photocatalyst was utilized to decompose the MB and Rh B dyes. The photocatalytic efficiency (Rh B) of MoS2-Bi2Te3-V2O5 nanocomposite (95.19 %) was higher than 2.70 times of Bi2Te3 nanorods, 1.55 times of V2O5 nanoparticles, 1.68 times of MoS2 nanosheets, 1.50 times of MoS2-Bi2Te3, and 1.21 times of MoS2-V2O5 nanocomposite, respectively. Recycling tests conducted on the MoS2-Bi2Te3-V2O5 nanocomposite revealed its high stability and durability. The outcomes obtained from the scavenger test suggest that the photogenerated hydroxyl radicals play a chief role in the photocatalytic performance of Rh B dye in the MoS2-Bi2Te3-V2O5 nanocomposite, respectively. The enhanced photocatalytic performance of the MoS2-Bi2Te3-V2O5 nanocomposite is ascribed to the strong hybrid formation of Bi2Te3, V2O5, and MoS2 nanosheets, respectively. Consequently, the straightforward and readily synthesized MoS2-Bi2Te3-V2O5 nanocomposite can serve as an economical, highly effective material for environmental applications.

Novel visible-light-active P-g-CN-based α-Bi2O3/WO3 ternary photocatalysts with a dual Z-scheme heterostructure for the efficient decomposition of refractory ultraviolet filters and environmental hormones: Benzophenones

The ubiquitous and refractory benzophenone (BP)-type ultraviolet filters, which are also endocrine disruptors, were commonly detected in the aquatic matrix and could not be efficiently removed by conventional wastewater treatment processes, thus causing extensive concern. Herein, a novel ternary nanocomposite, P-g-CN/α-Bi2O3/WO3 (P-gBW), was successfully fabricated by mixing cocalcinated components and applied to the decomposition of BP-type ultraviolet filters. The dual-Z-scheme heterostructure of P-gBW enhances visible-light absorption, efficiently facilitates separation and mobility, and prolongs the lifetime of photoinduced charge carriers via double charge transfer mechanisms. The optimum 95 wt% P-gBW exhibited excellent photocatalytic activity, degrading 96% 4-hydroxy benzophenone (4HBP) within 150 min and 93% 2,2',4,4'-tetrahydroxybenzophenone (BP-2) within 100 min under visible-light illumination, respectively. The pseudo-first-order rate constant of 4HBP (1.15 h-1) was 6.8-, 3.1-, 3.3- and 2.2-fold higher than those of WO3, P-g-CN, α-Bi2O3, and P-g-CN/α-Bi2O3, respectively, while that of BP-2 (1.71 h-1) was 5.2-, 2.2-, 3.2- and 1.5-fold higher, respectively. The improved photocatalytic degradation was attributed to efficient photoinduced charge carrier separation and migration and prevented the recombination of electron holes, as verified by photoluminescence, transient photocurrent response, and electrochemical impedance spectroscopy. Trapping experiments, electron paramagnetic resonance, and band energy position indicated an efficient dual-Z-scheme heterostructure.

Preparation of Porous Ellipsoidal Bismuth Oxyhalide Microspheres and Their Photocatalytic Performances

Well-dispersed and uniform porous ellipsoidal-shaped bismuth oxyhalides (nominal composition: 80%BiOCl/20%BiOI) microspheres were obtained by a facile solvothermal method, in which process the use of polyvinylpyrrolidone (PVP) as template agent was found to be crucial. At 150 °C, elliptical porous particles with a particle size of 0.79 μm were formed. Instead of forming solid solutions, the study of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) shows that the prepared 80%BiOCl/20%BiOI microspheres are composite of BiOCl and BiOI in nature and the obtained crystallite size is about 5.6 nm. The optical bandgap of 80%BiOCl/20%BiOI was measured to be 2.93 eV, which is between the bandgap values of BiOCl and BiOI. The 80%BiOCl/20%BiOI microspheres were able to decompose various organic dyes (rhodamine B-RhB, methyl orange-MO, methylene blue-MB, methyl violet-MV) under an illuminated condition with the degradation rate in the order of RhB > MB > MV > MO, and 98% of RhB can be degraded in 90 min. Radical scavenger tests showed that photogenerated holes are the main active species for the photocatalytic decomposition of all of the tested organic dyes. Our results show that the obtained porous ellipsoidal-shaped 80%BiOCl/20%BiOI microspheres are promising for the degradation of various organic pollutants under the illumination of visible light.

Template-Free Synthesis of g-C3N4 Nanoball/BiOCl Nanotube Heterojunction with Enhanced Photocatalytic Activity

There are many reports on g-C3N4 nanosheet and BiOCl nanosheet, but few studies on other morphologies of g-C3N4 and BiOCl. Herein, a g-C3N4 nanoball/BiOCl nanotube heterojunction prepared by a simple one-step acetonitrile solvothermal method is reported. The XRD results prove that the g-C3N4/BiOCl composites can be prepared in one step. SEM results revealed that the g-C3N4 was spherical and the BiOCl was tubular. The HRTEM results indicate that g-C3N4 has an amorphous structure and that the (100) crystal plane of BiOCl borders the g-C3N4. Spherical g-C3N4 has a narrow band gap (approximately 1.94 eV), and the band gap of g-C3N4/BiOCl after modification was also narrow. When the BiOCl accounted for 30% of the g-C3N4/BiOCl by mass, the quasi-primary reaction rate constant of RhB degradation was 45 times that of g-C3N4. This successful preparation method for optimizing g-C3N4 involving simple one-step template-free synthesis may be adopted for the preparation of diverse-shapes and high-performance nanomaterials in the future.

Dimensional-matched two dimensional/two dimensional TiO2/Bi2O3 step-scheme heterojunction for boosted photocatalytic performance of sterilization and water splitting

A Step-scheme (S-scheme) heterojunction can regulate the directional migration of powerful photogenerated carriers and realize high photocatalytic activity. Herein, we propose a novel dimensional matched S-scheme photocatalyst comprising of two-dimensional (2D) TiO₂ nanosheets and 2D Bi₂O₃ nanosheets for environmental and energy applications, such as water sterilization and water splitting. X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance, in-situ irradiated XPS and theoretical calculations provided strong evidence that the photocarrier migration in the TiO₂/Bi₂O₃ composite followed the S-scheme mode, which efficiently prevented the recombination of powerful photocarriers, thereby enabling the heterojunction with a strong redox ability for producing abundant reactive oxygen species. The tight and large 2D/2D interface minimized the distance of photocarrier migration to further extend the lifetime of useful photocarriers (active radicals for sterilization and photoelectrons for H₂ generation). The 2D/2D TiO₂/Bi₂O₃ heterojunction demonstrated an improved photocatalytic antibacterial performance with complete inactivation of 4.63 × 10⁷ CFU mL^-1Escherichia coli cells within 6 h in water. In addition, the heterojunction displayed a H₂ generation rate of 12.08 mmol h^-1g^-1 through water splitting process. This study provides a potential bifunctional photocatalyst for minimizing the adverse impact of pollution on the environment.

High-Efficacy Hierarchical Dy2O3/TiO2 Nanoflower toward Wastewater Reclamation: A Combined Photoelectrochemical and Photocatalytic Strategy

Developing a sustainable photocatalyst is crucial to mitigate the foreseeable energy shortage and environmental pollution caused by the rapid advancement of global industry. We developed Dy₂O₃/TiO₂ nanoflower (TNF) with a hierarchical nanoflower structure and a near-ideal anatase crystallite morphology to degrade aqueous rhodamine B solution under simulated solar light irradiation. The prepared photocatalyst was well-characterized using powder X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, energy-dispersive spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller, diffuse reflectance UV-vis spectra, and X-ray photoelectron spectroscopy. Further analysis was performed to highlight the photoelectrochemical activity of the prepared photocatalysts such as electrochemical impedance spectroscopy, linear sweep voltammetry, photocurrent response, and a Mott-Schottky study. The crystalline Dy₂O₃/TNF exhibits superb photocatalytic activity attributed to the improved charge transfer, reduced recombination rate of the electron-hole pairs, and a remarkable red-shift in light absorption.

Photocatalytic hydrogen evolution over a nickel complex anchoring to thiophene embedded g-C3N4

Evolution of hydrogen from water by utilizing solar energy and photocatalysts is one of the most promising ways to solve energy crisis. However, designing a cost-effective and stable photocatalyst without any noble metals is of vital importance for this process. Herein, an extremely active molecular complex cocatalyst NiL₂(Cl)₂ is successfully designed. After being covalently linked to thiophene-embedded polymeric carbon nitride (TPCN), the hybrid catalyst NiL₂(Cl)₂/TPCN exhibits extraordinary H₂ production activity of 95.8 μmol h^-1 without Pt (λ ≥ 420 nm), together with a remarkable apparent quantum yield of 6.68% at 450 nm. In such a composite catalyst, the embedded π-electron-rich thiophene-ring not only extends the π-conjugated system to enhance visible light absorption, but also promotes the charge separation through electron-withdrawing effect. It turns out that the CN covalent bonds formed between NiL₂(Cl)₂ and TPCN skeleton accelerate the transfer of electrons to the Ni active sites. Our finding reveals that the strategy of embedding π-electron-rich compounds to graphitic carbon nitride provides potentials to develop excellent photocatalysts. The strong covalent combination of molecular complexes cocatalyst onto organic semiconductors represents an important step towards designing noble-metal-free photocatalysts with superior activity and high stability for visible light driven hydrogen evolution.

Novel determination of Cd and Zn in soil extract by sequential application of bismuth and gallium thin films at a modified screen-printed carbon electrode

This study describes a novel electrochemical technique for the detection of bioavailable cadmium(II) (Cd) and zinc(II) (Zn), in real soil samples. This was made possible by the sequential deposition of bismuth and gallium thin films on modified screen-printed carbon electrodes (SPEs). A range of graphitic modifications were evaluated, and a reduced graphene oxide/graphitic carbon nitride (RGO/g-C₃N₄) modification proved most suitable. Electrochemical characterisation demonstrated superior stability, attributed to the functional groups of GO, and an increased electron transfer rate, attributed to the intercalated g-C₃N₄. For voltammetric analysis, cadmium was determined in acetate buffer (pH 4.6) using a bismuth thin film (BiTF). Zn was then determined in the same cell, after adjustment of the pH to 5.1, using a gallium thin film (GaTF). The rationale for two separate thin films is described. Optimisations, such as concentration of bismuth(III), gallium(III), potassium ferrocyanide, pH and deposition potentials, were conducted in the matrix of real samples. The LODs and LOQs were determined in the extracted soil matrix as 0.01 and 0.03 mg kg^-1, respectively, for bioavailable Cd and 0.01 and 0.04 mg kg^-1, respectively, for bioavailable Zn. Good agreement was observed for Cd and Zn levels in numerous soil samples when compared to the established technique of ICP-OES. This approach opens up the possibility for rapid on-site portable testing of Cd and Zn in real soil samples to determine the probability of Cd uptake by crops.

Graphitic carbon nitride/SmFeO3 composite Z-scheme photocatalyst with high visible light activity

In this work, novel heterostructured photocatalysts associating graphitic carbon nitride (g-CN) and SmFeO₃ were prepared via a mixing-ultrasonication process. Structural, optical and morphological characterizations demonstrate that the interfacial junction between g-CN and SmFeO₃ is well established for all g-CN/SmFeO₃ composites prepared with g-CN:SmFeO₃ weight ratio of 20:80, 50:50 and 80:20. The g-CN/SmFeO₃ (80:20) composite exhibits the highest photocatalytic activity for the degradation of pollutants like the Orange II dye and the tetracycline hydrochloride antibiotic under visible light irradiation. This high photocatalytic activity originates from the enhanced light absorption over the whole visible region compared to pure g-CN and from the improved separation and transfer of photogenerated electron/hole pairs as demonstrated by photoluminescence and photocurrent measurements. A Z-scheme charge carrier transfer mechanism was demonstrated for the photocatalytic reactions. The g-CN/SmFeO₃ (80:20) catalyst was also demonstrated to be stable and can be reused up to six times without significant alteration of the activity.

Biomass derived the V-doped carbon/Bi2O3 composite for efficient photocatalysts

This work focused on the utilization of biological extract for the preparation of lignin-based carbon composites materials and used in the field of photocatalysis. A straightforward one-step carbonization way has been developed to prepare vanadium-doped lignin-based carbon/Bi₂O₃ composites photocatalyst by using sodium lignosulfonate as the carbon source and catalyst. The application of lignin as the carbon source to form photocatalyst support tends to control the uniform distribution. At the same time, sodium lignosulfonate as the catalyst could break down the BiVO₄ during carbonization process. A series of characterizations demonstrated the BiVO₄ was transformed into Bi₂O₃ and vanadium-doped lignin-based carbon. The possible synthesis process was proposed. Moreover, the novel V-doped carbon/Bi₂O₃ composites photocatalyst displayed higher photocatalytic activity than bare BiVO₄. A possible photocatalytic mechanism was also discussed. This work provided new insight into the lignin-based carbon materials.

Construction of ultrathin MoS2/Bi5O7I composites: Effective charge separation and increased photocatalytic activity

Ultrathin MoS₂ nanosheet hybridized Bi₅O₇I (MoS₂/Bi₅O₇I) nanorods were synthesized via a reactable ionic liquid assisted solvothermal process for the first time. The photocatalytic activity of MoS₂/Bi₅O₇I nanorods was determined by photodegrading bisphenol A (BPA), tetracycline hydrochloride (TC) and ciprofloxacin (CIP) under visible light irradiation. Experimental results showed that MoS₂/Bi₅O₇I owned the excellent photocatalytic properties and photostability. The efficient visible light driven photocatalytic performance was due to a larger specific surface area of MoS₂, which increased the close interfacial contact between pollutants and photocatalysts. Meanwhile, the introduction of ultrathin MoS₂ nanosheet was conducive to the separation and utilization of photoinduced charge carriers, thus further suppressed high recombination rate in pure Bi₅O₇I nanorods. Moreover, a possible charge transfer path in MoS₂/Bi₅O₇I composite material was also put forward.

Enhancement of photocatalytic activity of g-C3N4 by hydrochloric acid treatment of melamine

Modified g-C₃N₄ samples (g-X, where X corresponds to the number of hours of acid treatment of the melamine) with outstanding photocatalytic performance were prepared by using hydrochloric acid-treated melamine as a precursor and calcining at 550 °C for 2 h. An x-ray diffractometer, field-emission scanning electron microscope, infrared spectrometer, N₂ adsorption-desorption test, x-ray photoelectron spectroscopy, and ultraviolet-visible diffuse-reflectance spectroscopy analysis were carried out to characterize the phase composition, microstructure, chemical structure, specific surface area (SSA), chemical states, elemental composition and optical properties of the samples, respectively. The photocatalytic performance of the samples was evaluated by degrading the Rhodamine B (RhB) aqueous solution. The results showed that the crystal structure and vibration bands of melamine changed due to the reaction with hydrochloric acid. The crystallinity and grain size of g-C₃N₄ in g-X (X = 1, 2, 4, 6, 8, 10) reduced, and the SSA values of g-X increased compared to that of the g-0 sample, which was synthesized from pristine melamine. The g-X samples exhibited excellent photocatalytic activity towards degradation of RhB compared to g-0. The photocatalytic activity of the g-X samples increased gradually as the acid treatment time of the melamine increased from 1 h to 2 h, and then decreased gradually with the extension of the acid treatment time. The rate constant (k) values of g-X are higher than that of g-0. g-2 presented the highest rate constant (k = 0.052 min^-1), which was 5.5 times higher than that of g-0. The improved photocatalytic activity of the g-X samples was attributed to the higher SSA value, the appearance of surface defects, the outstanding photo-carrier separation efficiency and stronger light harvesting ability of g-X, with the last two factors being more significant. Acid treatment of melamine is helpful in the preparation of high performance g-C₃N₄ photocatalyst, and the microstructure and photocatalytic performance of g-C₃N₄ were affected significantly by the acid treatment time.