Selective oxidation of glycerol over different shaped WO3 supported Pt NPs

Long-Term Selective Photoelectrochemical Glycerol Oxidation via Oxygen Vacancy Modulated Tungsten Oxide with Self-Healing

The photoelectrochemical selective oxidation of biowaste glycerol into the high value-added material, along with hydrogen production, holds significant promise for advancing renewable and sustainable energy technologies. Here, the surface oxygen state of tungsten oxide is modified to selectively oxidize glycerol into glyceraldehyde, a high-value-added material, and the selectivity is maintained over a prolonged period using the photo-stimulated self-recovery capability. The surface-coordinated photoelectrode exhibits high charge transfer efficiency to glycerol and favorable glycerol adsorption capacity, enabling the selective conversion of glycerol. At 1.2 VRHE in a 2 m glycerol electrolyte adjusted to pH 2, the tungsten oxide photoelectrode achieves a photocurrent density of 2.58 mA cm-2 and a production rate of 378.8 mmol m-2 h-1 with selectivity of 86.1%. The high selectivity is preserved for 18 h by utilizing the self-healing capability of tungsten oxide to restore initial states modified by photoelectrochemical oxidation. This work sheds light on the design of highly efficient metal oxide photoelectrodes for selective biomass oxidation over extended periods.

Nano-based biofuel production from low-cost lignocellulose biomass: environmental sustainability and economic approach

The use of nanomaterials in biofuel production from lignocellulosic biomass offers a promising approach to simultaneously address environmental sustainability and economic viability. This review provides an overview of the environmental and economic implications of integrating nanotechnology into biofuel production from low-cost lignocellulosic biomass. In this review, we highlight the potential benefits and challenges of nano-based biofuel production. Nanomaterials provide opportunities to improve feedstock pretreatment, enzymatic hydrolysis, fermentation, and catalysis, resulting in enhanced process efficiency, lower energy consumption, and reduced environmental impact. Conducting life cycle assessments is crucial for evaluating the overall environmental footprint of biofuel production. An economic perspective that focuses on the cost implications of utilizing nanomaterials in biofuel production is also discussed. A comprehensive understanding of both environmental and economic dimensions is essential to fully harness the potential of nanomaterials in biofuel production from lignocellulosic biomass and to move towards sustainable future energy.

Converting Glycerol into Valuable Trioses by Cuδ+ -Single-Atom-Decorated WO3 under Visible Light

Photocatalytic selective oxidation under visible light presents a promising approach for the sustainable transformation of biomass-derived wastes. However, achieving both high conversion and excellent selectivity poses a significant challenge. In this study, two valuable trioses, glyceraldehyde and dihydroxyacetone, are produced from glycerol over Cuδ+ -decorated WO3 photocatalyst in the presence of H2 O2 . The photocatalyst exhibits a remarkable five-fold increase in the conversion rate (3.81 mmol ⋅ g-1  ⋅ h-1 ) while maintaining a high selectivity towards two trioses (46.4 % to glyceraldehyde and 32.9 % to dihydroxyacetone). Through a comprehensive analysis involving X-ray photoelectron spectroscopy measurements with and without light irradiation, electron spin resonance spectroscopy, and isotopic analysis, the critical role of Cu+ species has been explored as efficient hole acceptors. These species facilitate charge transfer, promoting glycerol oxidation by photoholes, followed by coupling with OH- , which are subsequently dehydrated to yield the desired glyceraldehyde and dihydroxyacetone.

Photoelectrochemical Selective Oxidation of Glycerol to Glyceraldehyde with Bi-Based Metal-Organic-Framework-Decorated WO3 Photoanode

The conversion of glycerol to high-value-added products via photoelectrochemical (PEC) oxidation has emerged as a promising approach for utilizing a sustainable and clean energy source with environmental and economic benefits. Moreover, the energy requirement for glycerol to produce hydrogen is lower than that for pure water splitting. In this study, we propose the use of WO₃ nanostructures decorated with Bi-based metal-organic frameworks (Bi-MOFs) as the photoanode for glycerol oxidation with simultaneous hydrogen production. The WO₃-based electrodes selectively converted glycerol to glyceraldehyde, a high-value-added product, with remarkable selectivity. The Bi-MOF-decorated WO₃ nanorods enhanced the surface charge transfer and adsorption properties, thereby improving the photocurrent density and production rate (1.53 mA/cm² and 257 mmol/m²·h at 0.8 V_RHE). The photocurrent was maintained for 10 h, ensuring stable glycerol conversion. Furthermore, at 1.2 V_RHE, the average production rate of glyceraldehyde reached 420 mmol/m²·h, with a selectivity of 93.6% between beneficial oxidized products over the photoelectrode. This study provides a practical approach for the conversion of glycerol to glyceraldehyde via the selective oxidation of WO₃ nanostructures and demonstrates the potential of Bi-MOFs as a promising cocatalyst for PEC biomass valorization.