Polyacrylonitrile-based nanofibrous membrane with glycosylated surface for lectin affinity adsorption

Bioseparation using membrane chromatography: Innovations, and challenges

The resin-based column continues to be the dominant incumbent in bioprocess chromatography. While alternative formats such as membrane-, monolith- and fiber-based chromatography are more visible than before, each still plays minor roles. The reasons for this are complex and some of these are explained in this paper. However, the fact remains that membrane chromatography has come a long way since its early days of development. The main advantage of membrane chromatography continues to be its convection dominant transport mechanism, the resultant benefit being fast and scalable separation. Also, resolution obtained with properly designed devices could be comparable or even better than resin-based chromatography. Significant progress has been made in new membrane development, membrane characterization, device design and novel applications development. A wider range of new membrane matrices, ligands, and ligand-matrix linking chemistries are now available. New membrane modules, formats, and process configurations have also helped improve membrane performance. However, some significant challenges still exist, and these need to be addressed if membrane chromatography is to become more mainstream in the field of bioprocessing. Also, membrane chromatography has significant potential for application in analytical separations and this space has hardly been explored. In this paper, the advances in the areas of membrane preparation, device design and process development are reviewed. A high-level cost analysis is presented and the role of process design in membrane chromatography is discussed.

Preparation of Polyacrylonitrile-Based Immobilized Copper-Ion Affinity Membranes for Protein Adsorption

A polyacrylonitrile (PAN)-based immobilized metal-ion affinity membrane (IMAM) was prepared with a high capacity for protein adsorption. PAN was selected as the substrate due to its excellent thermal and chemical stability. The cyano groups on the PAN membrane were substituted with carboxyl groups, followed by reactions with ethylenediamine (EDA) and ethylene glycol diglycidyl ether (EGDGE) to produce the terminal epoxy groups. The chelating agent iminodiacetic acid (IDA) was then bound to the modified PAN membrane and further chelated with copper ions. The immobilized copper ion amount of membrane was analyzed to obtain the optimal reaction conditions, which were 60 °C/3 h for EDA coupling and 60 °C/4 h for EGDGE grafting. Furthermore, under the use of minor IDA and copper ion concentrations, the immobilized copper ion capacity of the IMAM was 4.8 μmol/cm² (253.4 µmol/mL, or 1.47 μmol/mg). At a neutral pH, the cationic lysozyme exhibited a large adsorption capacity with the IMAM (1.96 μmol/mL), which was most likely multilayer binding, whereas the adsorption capacity for bovine serum albumin (BSA) and histidine-tagged green fluorescent protein (GFP-His₆) was 0.053 μmol/mL and 0.135 μmol/mL, respectively, with a monolayer adsorption arrangement. The protein desorption efficiency was greater than 95%, implying that the prepared IMAM could be reused for protein adsorption.

Lectin Purification through Affinity Chromatography Exploiting Macroporous Monolithic Adsorbents

Growing medical, engineering, biochemical, and biological interest has led to a steady pace of research and development into polymeric monolithic structures with densely interconnected pores for purifying bio compounds. Cryogels, which are generated by freezing a reactive polymerization mixture, are highlighted due to their versatility and low relative cost as macroporous, polymeric, monolithic adsorbents. The conversion of cryogels into affinity adsorbents is one possible alternative to their optimal application. Some of the most often utilized supports for immobilizing particular ligands are monolithic columns manufactured with epoxy radicals on their surfaces. The purification of biomolecules with a high degree of specificity, such as lectins and glycoproteins with an affinity for glycosylated groups, has garnered interest in the use of fixed non-traditional beds functionalized with ligands of particular interest. The interaction is both robust enough to permit the adsorption of glycoproteins and reversible enough to permit the dissociation of molecules in response to changes in the solution’s pH. When compared to other protein A-based approaches, this one has been shown to be more advantageous than its counterparts in terms of specificity, ease of use, and cost-effectiveness. Information on polymeric, macroporous, monolithic adsorbents used in the affinity chromatographic purification of lectins has been published and explored.

Membrane Chromatography and Fractionation of Proteins from Whey—A Review

Membrane chromatography (MC) is an emerging bioseparation technology combining the principles of membrane filtration and chromatography. In this process, one type of molecule is adsorbed in the stationary phase, whereas the other type of molecule is passed through the membrane pores without affecting the adsorbed molecule. In subsequent the step, the adsorbed molecule is recovered by an elution buffer with a unique ionic strength and pH. Functionalized microfiltration membranes are usually used in radial flow, axial flow, and lateral flow membrane modules in MC systems. In the MC process, the transport of a solute to a stationary phase is mainly achieved through convection and minimum pore diffusion. Therefore, mass transfer resistance and pressure drop become insignificant. Other characteristics of MC systems are a minimum clogging tendency in the stationary phase, the capability of operating with a high mobile phase flow rate, and the disposable (short term) application of stationary phase. The development and application of MC systems for the fractionation of individual proteins from whey for investigation and industrial-scale production are promising. A significant income from individual whey proteins together with the marketing of dairy foods may provide a new commercial outlook in dairy industry. In this review, information about the development of a MC system and its applications for the fractionation of individual protein from whey are presented in comprehensive manner.

Functional Microfiber Nonwoven Fabric with Sialic Acid-Immobilized Polymer Brush for Capturing Lectin in Aerosol

The influenza virus has been known as a representative infectious virus that harms human health from the past to the present day. We have promoted the development of a novel adsorbent capable of adsorbing influenza viruses in the form of aerosols in the air. In this study, to develop a material to adsorb the influenza virus, a functional group was introduced into a microfiber nonwoven fabric (MNWF) manufactured through radiation-induced graft polymerization (RIGP), and sialic acid was immobilized to mimic the sugar chain cluster effect. The functional group was used by coupling disodium iminodiacetate monohydrate (IDA) and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC), and N-acetylneuraminic acid (NANA) was selected for sialic acid. IDA-EDC was introduced into GMA MNWF with an average molar conversion of 47%. For NANA MNWF with a degree of grafting (dg) of 87% introduced with sialic acid, 118.2 of 200 µg of aerosolized lectin was adsorbed, confirming that the maximum adsorption amount was 59.1%. In NANA MNWF of 100% or more dg, a tendency to decrease the amount of lectin adsorption was observed compared to NANA MNWF of 80–100% dg.

Catalytic membrane-based oxidation-filtration systems for organic wastewater purification: A review

Catalytic membranes can simultaneously realize physical separation and chemical oxidation in one integrated system, which is the frontier technology for effective removal of organic containments in wastewater treatment. The catalytic membrane coupled with advanced oxidation processes (AOPs) not only significantly enhances the pollutant removal efficiency but also inhibits the fouling of the membrane via self-cleaning. In this review, the preparation approaches of catalytic membranes including blending, surface coating, and bottom-up synthesis are comprehensively summarized. The different integrated catalytic membrane systems coupled with photocatalysis, Fenton oxidation, persulfate activations, ozonation and electrocatalytic oxidation are discussed in terms of mechanisms and performance. Besides, the principles, influencing factors, advantages and issues of the different catalytic membrane/oxidation systems are outlined comparatively. Finally, the future challenges, and research directions are suggested, which is conducive to the design and development of catalytic membrane-oxidation systems for practical remediation of organic containing wastewater.

Selective adsorption of globulin on nanofiber meshes for immunoadsorption therapy

Cost-effective development of a carboxylated EVOH nanofiber mesh to adsorb γ-globulin selectively for immunoadsorption therapy.

Phaseolus vulgaris lectins: A systematic review of characteristics and health implications

Legume lectins are carbohydrate-binding proteins of non-immune origin. Significant amounts of lectins have been found in Phaseolus vulgaris beans as far back as in the last century; however, many questions about their potential biological roles still remain obscure. Studies have shown that lectins are anti-nutritional factors that can cause intestinal disorders. Owing to their ability to act as toxic allergens and hemagglutinins, the Phaseolus vulgaris lectins are of grave concern for human health and safety. Nonetheless, their potential beneficial health effects, such as anti-cancer, anti-human immunodeficiency virus (anti-HIV), anti-microbial infection, preventing mucosal atrophy, reducing type 2 diabetes and obesity, promoting nutrients absorption and targeting drugs, are of immense interest. The significance of Phaseolus vulgaris lectins in biological researches and the potential biomedical applications have placed tremendous emphasis on the development of purification strategies to obtain the protein in pure and stable forms. These purification strategies entail considerations such as effects of proteolysis, heating, gamma radiation, and high-hydrostatic-pressure that can have crucial outcomes in either eliminating or improving bioactivities of the lectins. Thus, up-to-date research findings of Phaseolus vulgaris lectins on different aspects such as anti-nutritional and health impacts, purification strategies and novel processing trends, are systematically reviewed.

Novel affinity membranes with macrocyclic spacer arms synthesized via click chemistry for lysozyme binding

Affinity membrane has great potential for applications in bioseparation and purification. Disclosed herein is the design of a novel affinity membrane with macrocyclic spacer arms for lysozyme binding. The clickable azide-cyclodextrin (CD) arms and clickable alkyne ethylene-vinyl alcohol (EVAL) chains are designed and prepared. By the azide-alkyne click reaction, the EVAL-CD-ligands affinity membranes with CD spacer arms in three-dimensional micro channels have been successfully fabricated. The FT-IR, XPS, NMR, SEM and SEM-EDS results give detailed information of structure evolution. The abundant pores in membrane matrix provide efficient working channels, and the introduced CD arms with ligands (affinity sites) provide supramolecular atmosphere. Compared with that of raw EVAL membrane, the adsorption capacity of EVAL-CD-ligands membrane (26.24mg/g) show a triple increase. The study indicates that three effects (inducing effect, arm effect, site effect) from CD arms render the enhanced performance. The click reaction happened in membrane matrix in bulk. The effective lysozyme binding and higher adsorption performance of affinity membranes described herein compared with other reported membranes are markedly related with the proposed strategy involving macrocyclic spacer arms and supramolecular working channels.

pH-Responsive and pyrene based electrospun nanofibers for DNA adsorption and detection

A labeling-free DNA adsorption and detection method based on pH-responsive volume changes poly(DMAEMA-co-SA-co-Py) nanofibers shows its potential applications in DNA adsorption and separation.

Glycopolymer monoliths for affinity bioseparation of proteins in a continuous-flow system: glycomonoliths

Macroporous materials, called glycomonoliths, were prepared from saccharide-containing monomers, and applied for affinity bioseparation of proteins in a continuous-flow system.

Scalable Fabrication of Electrospun Nanofibrous Membranes Functionalized with Citric Acid for High-Performance Protein Adsorption

Fabricating protein adsorbents with high adsorption capacity and appreciable throughput is extremely important and highly desired for the separation and purification of protein products in the biomedical and pharmaceutical industries, yet still remains a great challenge. Herein, we demonstrate the synthesis of a novel protein adsorbent by in situ functionalizing eletrospun ethylene-vinyl alcohol (EVOH) nanofibrous membranes (NFM) with critic acid (CCA). Taking advantage of the merits of large specific surface area, highly tortuous open-porous structure, abundant active carboxyl groups introduced by CCA, superior chemical stability, and robust mechanical strength, the obtained CCA-grafted EVOH NFM (EVOH-CCA NFM) present an excellent integrated protein (take lysozyme as the model protein) adsorption performance with a high capacity of 284 mg g(-1), short equilibrium time of 6 h, ease of elution, and good reusability. Meanwhile, the adsorption performance of EVOH-CCA NFM can be optimized by regulating buffer pH, ionic strength, and initial concentration of protein solutions. More importantly, a dynamic binding efficiency of 250 mg g(-1) can be achieved driven solely by the gravity of protein solution, which matches well with the demands of the high yield and energy conservation in the actual protein purification process. Furthermore, the resultant EVOH-CCA NFM also possess unique selectivity for positively charged proteins which was confirmed by the method of sodium dodecyl sulfate polyacrylamide gel electrophoresis. Significantly, the successful synthesis of such intriguing and economic EVOH-CCA NFM may provide a promising candidate for the next generation of protein adsorbents for rapid, massive, and cost-effective separation and purification of proteins.

Highly carbonylated cellulose nanofibrous membranes utilizing maleic anhydride grafting for efficient lysozyme adsorption

Construction of adsorptive materials for simple, efficient, and high-throughput adsorption of proteins is critical to meet the great demands of highly purified proteins in biotechnological and biopharmaceutical industry; however, it has proven extremely challenging. Here, we report a cost-effective strategy to create carbonyl groups surface-functionalized nanofibrous membranes under mild conditions for positively charged protein adsorption. Our approach allows maleic anhydride to in situ graft on cellulose nanofibrous membranes (CMA) to construct adsorptive membranes with large surface area and tortuous porous structure. Thereby, the resultant CMA membranes exhibited high adsorption capacity of 160 mg g(-1), fast equilibrium within 12 h, and good reversibility to lysozyme. Moreover, the dynamic adsorption was performed under low pressure-drops (750 Pa), with a relatively high saturation adsorption amount of 118 mg g(-1), which matched well with the requirements for proteins purification. Considering the excellent adsorption performance of the as-prepared adsorptive membranes, this simple and intriguing approach may pave a way for the design and development of robust and cost-effective adsorption membranes to meet the great demands for fast and efficient adsorption of positively charged proteins.

Bio-functionalized nanofibrous membranes as a hybrid platform for selective antibody recognition and capturing

PVA-co-PE nanofibers were activatedviaversatile surface chemistries to achieve protein ligand couplings and subsequent antibody recognition and capturing.

In situ cross-linked and highly carboxylated poly(vinyl alcohol) nanofibrous membranes for efficient adsorption of proteins

In situ cross-linked and highly carboxylated poly(vinyl alcohol) nanofibrous membranes for lysozyme adsorption were fabricated by a combination of electrospinning and graft polymerization of poly(vinyl alcohol) and maleic anhydride.

Solution-blown core–shell hydrogel nanofibers for bovine serum albumin affinity adsorption

In this work, nylon 6 core–chitosan/poly(vinyl alcohol) (PVA) shell hydrogel nanofibers (NCNFs) were fabricated by coaxial solution blowing for BSA adsorbing.

Surface modification of electrospun cellulose acetate nanofibers via RAFT polymerization for DNA adsorption

We report on a facile and robust method by which surface of electrospun cellulose acetate (CA) nanofibers can be chemically modified with cationic polymer brushes for DNA adsorption. The surface of CA nanofibers was functionalized by growing poly[(ar-vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes through a multi-step chemical sequence that ensures retention of mechanically robust nanofibers. Initially, the surface of the CA nanofibers was modified with RAFT chain transfer agent. Poly(VBTAC) brushes were then prepared via RAFT-mediated polymerization from the nanofiber surface. DNA adsorption capacity of CA nanofibrous web surface functionalized with cationic poly(VBTAC) brushes was demonstrated. The reusability of these webs was investigated by measuring the adsorption capacity for target DNA in a cyclic manner. In brief, CA nanofibers surface-modified with cationic polymer brushes can be suitable as membrane materials for filtration, purification, and/or separation processes for DNA.