Conductive and hydrophilic polypyrrole modified membrane cathodes and fouling reduction in MBR

Molecular Understanding of Polyaniline in Imidazolium-Based Ionic Liquid and Water Mixtures: A Molecular Dynamics Simulation Study

Monitoring interactive influence of cations and anions is inevitable for the development of conductive membranes using polyaniline (PANI). Herein, emeraldine base (EB) and emeraldine salt (ES) forms of PANI structural properties are understood in different imidazolium ionic liquid-water mixtures using molecular dynamics (MD) simulations. The conformational and structural properties of PANI using the combinations of two cations (1-ethyl-3-methylimidazolium [EMIM]+ and 1-butyl-3-methylimidazolium [BMIM]+) and five anions (acetate [ACT]-, formate [FRM]-, trifluoromethyl-sulfonate [TFS]-, benzoate [BEZ]-, and nitrate [NO3]-) are calculated. Based on various structural properties, it is understood that the anions play a dominant interaction with EB or ES compared to cations. Interestingly, it is observed that the radius of gyration shows an increase with [BMIM]+ and a decrease with [EMIM]+ with respect to the increasing size of the anion. There is a decrease in van der Waals interaction for ES due to the elongation of the chain when compared to EB. The excess molar volume shows more solvation behavior for ES than EB. Nevertheless, an increase in anion size leads to the favorable solvation of EB and ES. These observations help in the selection of the best combination of ILs for the sustainable designing of polymer membranes and their applications.

Structure and Conformational Properties of a Short Polyaniline Chain in a Mixture of Water and Ionic Liquid [1-Ethyl-3-methyl-imidazolium][bistriflimide] Investigated by All-Atom Molecular Dynamics Simulations

Development of antifouling membranes for water treatment using conducting polymers and their composites is a fundamental strategy to mitigate the fouling. This manuscript presents an all-atom molecular dynamics simulations of a conducting polymer, polyaniline (PANI), immersed in an ionic liquids (ILs)-water mixtures. We have considered the ionic liquid 1-ethyl-3-methyl imidazolium bistriflimide, [EMIM]+[BIS]-. The two forms of polyaniline, emeraldine base (EB) and emeraldine salt (ES), were considered. Various intra- and intermolecular structural properties of PANI were analyzed, such as polymer chain radius of gyration Rg, radial distribution functions, and torsional angle distributions. The Rg of EB shows an increase, while the Rg of ES shows a decrease with an increase in the IL concentration. The backbone torsional angle probability distributions show a significant trans state for EB, while a combination of trans and gauche states was observed for ES. Similar supportive distributions were seen in the backbone angular distributions. Radial distribution functions between the carbon atoms at ortho and meta positions of the benzene ring on both ES and EB, as well as the amine group attached between two benzene rings, show an enhanced interaction with the ionic liquid compared to water. Anions have a dominant interaction with the polymer chain when compared to cations. The solvent accessible surface area (SASA) calculations were in accordance with the EB and ES structural properties. The SASA values are more favorable for ES than for EB. H-bond analysis shows a decrease in the number of H-bonds with water as the IL concentration increases.

A novel reduced graphene oxide/polypyrrole conductive ceramic membrane enhanced electric field membrane bioreactor: Mariculture wastewater treatment performance and membrane fouling mitigation

A novel electric field membrane bioreactor (EMBR) for mariculture wastewater treatment utilizing reduced graphene oxide/polypyrrole ceramic membrane (rGO/PPy CM) was constructed and compared with MBRs using CM support and rGO/PPy CM. EMBR (rGO/PPy) obtained the highest pollutant removal rates (84.99% for TOC, 85.98% for NH₄⁺-N), the lowest average membrane fouling rate (2.42 kPa/d) and pollutant adhesion performance by characterization. Meanwhile, the specific fluxes of characteristic foulants in EMBR were enhanced, and the total resistances were reduced by 8.12% to 62.46%. The underlying mechanisms included reduced attraction energy and improved electrostatic repulsion between contaminants in EMBR and membrane by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, DLVO model and force analysis. Therefore, this study complemented the understanding of antifouling effect and mechanism in EMBR by interaction energy and force analysis of characteristic pollutants. These findings also provided new insights into the application of EMBR for mariculture wastewater treatment.

Preparation and Characterization of MWCNTs/PVDF Conductive Membrane with Cross-Linked Polymer PVA and Study on Its Anti-Fouling Performance

Based on carboxylated multi-walled carbon nanotubes (MWCNTs-COOH), a MWCNTs/PVDF conductive membrane was prepared by a vacuum filtration cross-linking method. The surface compositions and morphology of conductive membranes were studied by X-ray photoelectron spectroscopy and high-resolution field emission scanning electron microscopy, respectively. The effects of cross-linked polymeric polyvinyl alcohol (PVA) on the conductive membrane properties such as the porosity, pore size distribution, pure water flux, conductivity, hydrophilicity, stability and antifouling properties were investigated. Results showed that the addition of PVA to the MWCNTs/PVDF conductive membrane decreased the pure water flux, porosity and the conductivity. However, the hydrophilicity of the modified MWCNTs/PVDF conductive membrane was greatly improved, and the contact angle of pure water was reduced from 70.18° to 25.48° with the addition of PVA contents from 0 wt% to 0.05 wt%. Meanwhile, the conductive membranes with higher content had a relatively higher stability. It was found that the conductive functional layer of the conductive membrane had an average mass loss rate of 1.22% in the 30 min ultrasonic oscillation experiment. The tensile intensity and break elongation ratio of the conductive membrane are improved by the addition of PVA, and the durability of the conductive membrane with PVA was superior to that without PVA added. The electric assisted anti-fouling experiments of modified conductive membrane indicated that compared with the condition without electric field, the average flux attenuation of the conductive membrane was reduced by 11.2%, and the membrane flux recovery rate reached 97.05%. Moreover, the addition of PVA could accelerate the clean of the conductive membranes.

Preparation and Properties of Waterborne Polypyrrole/Cement Composites

The electrical properties of cement are gaining importance for the application in building construction. Polypyrrole (PPy) has been widely applied in most fields because of its excellent conductivity performance, environmental friendliness, easy fabrication, and other specialties. These features made them useful for self-sensing applications. In this work, waterborne polypyrrole (WPPy) was prepared via the chemical oxidative polymerization with three kinds of hydrophilic agents: sodium lignosulfonate (LGS), sodium dodecyl sulfonate (SDS), and sodium dodecyl sulfate (SLS), and then WPPy/cement composites were prepared by mixing cement with it. The contact angle, conductivity, and microstructure of WPPy were characterized by contact angle tester, four-point probes, and SEM. The composition, microstructure, and properties of WPPy/cement composites were characterized by FTIR, TGA, XRD, and SEM. The content of LGS was 40 wt%, WPPy got the optimal comprehensive performance, the conductivity was 15.06 times of the control sample and the contact angle was reduced by 69.95%. SEM analysis showed that hydrophilic agent content had great effect on the particle size of WPPy, the average diameter of WPPy particles decreased from 200 nm to 50 nm with the increase of LGS content. The results also showed that the adding of WPPy in WPPy/cement composites can significantly improve the conductivity and compactness, optimize the microstructure of cement composite. When the content of WPPy was 1.25 wt%, WPPy/cement composite showed the lowest resistivity and saturated water content of cement composite was 8 wt%. In addition, it could also inhibit the formation of Ca(OH)₂ in the early hydration process.

Facile fabrication of a conductive polypyrrole membrane for anti-fouling enhancement by electrical repulsion and in situ oxidation

Conductive membranes provide a promising method to alleviate membrane fouling, but their cost-effective fabrication, which is urgently needed, is still a challenge. This paper describes the facile fabrication of an ultrafiltration conductive polypyrrole (PPy)-modified membrane (PMM) by in situ chemical polymerization of FeCl₃ and monomer pyrrole vapor on a commercial membrane surface. The resulting membrane had a high electrical conductivity and an outstanding water flux of 2766.55 L m^-2 h^-1 bar^-1. The preparation cost of the PPy deposition was $2.22/m², which was ∼8% of the commercial ultrafiltration membrane cost. Once the PMM was charged at -1 V as a membrane electrode, the normalized water flux was maintained at 92.48 ± 1.14% after fouling by bovine serum albumin (BSA) solutions, which was 18.82% higher than that when the PMM was not charged. The reduced membrane fouling was ascribed to the electrical repulsion between the negatively charged BSA and the PMM cathode. In addition, hydroxyl and sulfate radicals were generated by peroxymonosulfate (PMS) activation on the PMM surface through electron transfer by PPy, which facilitated foulant oxidation. The PPy on the PMM surface was oxidized after catalysis and electrochemically reduced when the PMM was charged as a cathode, exhibiting continuous catalytic ability for PMS activation. These findings provide an alternative method for the facile fabrication of cost-effective conductive membranes to mitigate membrane fouling.

An experimental study on the use of a sequencing-batch membrane bioreactor (SBMBR) for the treatment of mixed municipal wastewater

Several water treatment techniques have been combined using the sequencing batch reactor with the membrane bioreactor for addressing water pollution. However, cleaning of the membrane is dependent on the approach involved as well as the operating conditions. In the present study, the sequencing-batch membrane bioreactor was used to treat real mixed municipal wastewater. The pollutant removal and membrane filtration performances were examined. The results show that the average removal rates of chemical oxygen demand (COD), total nitrogen, NH₃-N, total phosphorus, and turbidity were 90.75, 63.52, 92.85, 87.58, and 99.48%, respectively, when the system was in continuous operation for 95 days. The membrane had a significant effect on COD and turbidity removal and provided stable performances for nitrogen and phosphorus removal. By observing the appearance of the membrane modules before and after the cleaning operation, it was concluded that the deposited sludge and granular sediment on the membrane surface can be effectively removed by hydraulic cleaning. In addition, recovery of membrane filtration performance to 60% of that of a new membrane can be achieved. Furthermore, we found that different sequences and duration of cleaning have different effects on the recovery of membrane filtration performance.

An all-solid-state NO3- ion-selective electrode with gold nanoparticles solid contact layer and molecularly imprinted polymer membrane

To improve the single-layer all-solid-state ion selective electrode' defects including poor conductivity of PVC sensitive membrane and interference of water layer between substrate electrode and sensitive membrane, a double-layer all-solid-state ion selective electrode with nanomaterial as the solid contact layer and conductive polymer as the ion sensitive membrane was developed. A gold nanoparticles solid contact layer and a nitrate-doped polypyrrole molecularly imprinted polymer membrane were prepared by electrodeposition. The optimal parameters obtained by electrochemical performance test were 2.5 mmol/L HAuCl4 electrolyte for solid contact layer and 1800s electrodeposition time for sensitive membrane. The new electrode exhibited a Nernstian response of -50.4 mV/decade and a low detection limit of 5.25×10-5mol/L. Potentiometric water layer test showed no water film formed between the gold nanoparticles solid contact layer and nitrate-doped polypyrrole molecularly imprinted polymer membrane. The contact angle between droplet and the surface of solid contact layer was 112.35° and showed good hydrophobic property. Furthermore, the developed electrode exhibited fast response, excellent potential stability and long lifetime. This electrode is suitable for the detection of nitrate concentration in water and liquid fertilizer.

Enhanced treatment performance of phenol wastewater and membrane antifouling by biochar-assisted EMBR

Biochar-assisted EMBR (BC-assisted EMBR) was built to enhance treatment performance of phenol wastewater and membrane antifouling. BC-assisted EMBR significantly increased phenol degradation efficiency, owing to combined effects of biodegradation, adsorption and electro-catalytic degradation. Meanwhile, BC-assisted EMBR obviously mitigated membrane fouling. The coupling effect of BC and voltage led to the lower N-acyl-homoserine lactones (AHLs) and bound extracellular polymeric substances (bound EPS) contents around and on membrane surface. Protein (PN)/polysaccharide (PS) in bound EPS was decreased, led to the increase of negative charge and decrease of hydrophobicity of sludge, which abated bound EPS adsorption on membrane surface. Microbial community analyses revealed that the coupling effect of BC and voltage could enrich phenol-degraders (e.g., Comamonas), electron transfer genus (Phaselicystis), and biopolymer-degraders (Phaselicystis and Tepidisphaera) in BC-assisted EMBR and on its membrane surface, while decrease biofilm-former (e.g., Acinetobacter) and bound EPS-producer (Devosia), which was beneficial to promote phenol treatment and mitigate membrane fouling.

Quorum quenching bacteria bioaugmented GO/PPy modified membrane in EMBR for membrane antifouling

A novel integrated system with quorum quenching (QQ) bacterium Burkholderia sp. ssn-2 bioaugmented graphene oxide/polypyrrole (GO/PPy) conductive polymercomposite membrane (CPM) in MBR with electric field (EMBR) was established. The integrated system exhibited the highest degradation efficiency for phenol (100%) and COD (93.2%-99.9%) during the 120 days operation. Membrane fouling in the integrated system was notably mitigated by the coupling effect of CPM + voltage and QQ bacterium ssn-2. The hydrophilicity and antibacterial activity of CPM inhibited the hydrophobic protein foulants adsorption, bacteria colonization and attachment on the CPM surface. Extracellular polymeric substances (EPS) content was positively correlated with N-acyl-homoserine lactones (AHLs) concentration, and decreased with AHLs degradation by QQ bacterium ssn-2. The increased negative charge of EPS on the CPM surface augmented the electrostatic repulsion between the EPS and cathode CPM in the integrated system. Moreover, the coupling effect altered the microbial communities. A decreased AHLs concentration had a significantly negative correlation with QQ bacterium ssn-2 enrichment, which exhibited the dual effects of degrading phenol and AHLs, and enriching biopolymer-degrading genera Clostridium sensu strict and Acidovorax in the integrated system and on the CPM surface. This can lead to a decrease in the EPS content.

One-Step Electrochemically Prepared Graphene/Polyaniline Conductive Filter Membrane for Permeation Enhancement by Fouling Mitigation

In the electrofiltration process, membrane conductivity plays a decisive role in improving the antifouling performance of the membrane. In this paper, combining the preparation of graphene (Gr) with the fabrication of the Gr layer on the surface of a polyaniline (PANI) membrane, a graphene/PANI (Gr/PANI) conductive membrane was prepared creatively by the one-step electrochemical method. The properties of the as-prepared Gr/PANI membrane were studied systematically. By the tests of Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, and atomic force microscopy, it was confirmed that Gr was successfully produced and was combined with the PANI membrane well. Field scanning electron microscopy with energy-dispersive X-ray analysis further confirmed that the top surface and the upper layer pore walls of the membrane were randomly covered by Gr. The antifouling performance of the prepared membrane was evaluated by studying the permeation flux of the yeast suspension, compared with the ones with no electric field: the total permeation flux at 1 V direct current (dc) increased by 109%; besides, under 1 V dc, the average flux of the Gr/PANI membrane was approximately 1.4 times that of the PANI membrane. This approach may provide a promising strategy for the combination of Gr with conductive polymers to produce separation membranes.

Graphene-based electro-conductive anti-fouling membranes for the treatment of oil sands produced water

In this study, a thin layer of polyaniline (PANI)-reduced graphene oxide (rGO) was laminated on polyethersulfone (PES) support by pressure-assisted technique. Organic fouling on the resulting robust and electro-conductive membranes reduced significantly by applying an external electric field. The electrical conductivity of pristine PANI film was 0.46 S/m while it was increased up to 84.53 S/m by adding appropriate amount of rGO. Both anodic and cathodic potentials in a wide range were applied to the prepared membranes using synthetic sodium alginate and real oil sands boiler feed water (BFW) waste of Alberta, Canada. Filtration tests showed that fouling resistance of electro-oxidative membranes towards sodium alginate improved, and 31.9% flux decline recovered when 2 V anodic cell potential was applied. By increasing the applied voltage from 3 V to 9 V, the antifouling property of membrane, as well as flux recovery ratio (FRR), improved dramatically and reached to 97.47% in the anodic setting. Such a significant improvement was attributed to electrostatic repulsive force between foulant and membrane surface, massive gas bubble generation, and electro-oxidation reactions. The cathodic electro-reduction configuration was also tested for BFW, where water flux decline and rejection performance were both improved by elevating electric potential.

Feasibility of isolated novel facultative quorum quenching consortiums for fouling control in an AnMBR

Anaerobic membrane bioreactor (AnMBR) technology is being recognized as an appealing strategy for wastewater treatment, however, severity of membrane fouling inhibits its widespread implementations. This study engineered novel facultative quorum quenching consortiums (FQQs) coping with membrane fouling in AnMBRs with preliminary analysis for their quorum quenching (QQ) performances. Herein, Acyl-homoserine lactones (AHLs)-based quorum sensing (QS) in a lab-scale AnMBR initially revealed that N-Hexanoyl-dl-homoserine lactone (C6-HSL), N-Octanoyl-dl-homoserine lactone (C8-HSL) and N-Decanoyl-dl-homoserine lactone (C10-HSL) were the dominant AHLs in AnMBRs in this study. Three FQQs, namely, FQQ-C6, FQQ-C8 and FQQ-C10, were harvested after anaerobic screening of aerobic QQ consortiums (AeQQs) which were isolated by enrichment culture, aiming to degrade C6-HSL, C8-HSL and C10-HSL, respectively. Growth of FQQ-C6 and FQQ-C10 using AHLs as carbon source under anaerobic condition was significantly faster than those using acetate, congruously suggesting that their QQ performance will not be compromised in AnMBRs. All FQQs degraded a wide range of AHLs pinpointing their extensive QQ ability. FQQ-C6, FQQ-C8 and FQQ-C10 remarkably alleviated extracellular polymeric substances (EPS) production in a lab-scale AnMBR by 72.46%, 35.89% and 65.88%, respectively, and FQQ-C6 retarded membrane fouling of the AnMBR by 2 times. Bioinformatics analysis indicated that there was a major shift in dominant species from AeQQs to FQQs where Comamonas sp., Klebsiella sp., Stenotrophomonas sp. and Ochrobactrum sp. survived after anaerobic screening and were the majority in FQQs. High growth rate utilizing AHLs under anaerobic condition and enormous EPS retardation efficiency in FQQ-C6 and FQQ-C10 could be attributed to Comamonas sp.. These findings demonstrated that FQQs could be leveraged for QQ under anaerobic systems. We believe that this was the first work proposing a bacterial pool of facultative QQ candidates holding biotechnological promises for membrane fouling control in AnMBRs.

A bio-electrochemical membrane system for more sustainable wastewater treatment with MnO2/PANI modified stainless steel cathode and photosynthetic provision of dissolved oxygen by algae

A competitive sewage treatment technology should meet the standard of water quality requirement and accomplish recovery of potential energy. This study presents such a new system, with coupled membrane bioreactor-microbial fuel cell features, which can not only treat wastewater, but also recovers energy from wastewater by electricity generation, and form a new resource by photosynthesis while providing the dissolved oxygen by algae. Specifically, in the system, the MnO₂/polyaniline is used to modify the stainless steel mesh and to function well as system membrane and cathode, with satisfactory filtration and catalysis performance. The system enables continuous wastewater treatment with stable pollutant removal and electricity generation. Under the membrane flux of 119.4 Lm^-2 h^-1, a maximum power density of 1.2 W m^-3 can be achieved, the algae multiply 6.1 times, and satisfactory wastewater treatment effect is achieved.

Electro-Conductive Membranes for Permeation Enhancement and Fouling Mitigation: A Short Review

The research on electro-conductive membranes has expanded in recent years. These membranes have strong prospective as key components in next generation water treatment plants because they are engineered in order to enhance their performance in terms of separation, flux, fouling potential, and permselectivity. The present review summarizes recent developments in the preparation of electro-conductive membranes and the mechanisms of their response to external electric voltages in order to obtain an improvement in permeation and mitigation in the fouling growth. In particular, this paper deals with the properties of electro-conductive polymers and the preparation of electro-conductive polymer membranes with a focus on responsive membranes based on polyaniline, polypyrrole and carbon nanotubes. Then, some examples of electro-conductive membranes for permeation enhancement and fouling mitigation by electrostatic repulsion, hydrogen peroxide generation and electrochemical oxidation will be presented.

Electroconductive and electroresponsive membranes for water treatment

In populated, water-scarce regions, seawater and wastewater are considered as potable water resources that require extensive treatment before being suitable for consumption. The separation of water from salt, organic, and inorganic matter is most commonly done through membrane separation processes. Because of permeate flux and concentration polarization, membranes are prone to fouling, resulting in a decline in membrane performance and increased energy demands. As the physical and chemical properties of commercially available membranes (polymeric and ceramic) are relatively static and insensitive to changes in the environment, there is a need for stimuli-reactive membranes with controlled, tunable surface and transport properties to decrease fouling and control membrane properties such as hydrophilicity and permselectivity. In this review, we first describe the application of electricity-conducting and electricity-responsive membranes (ERMs) for fouling mitigation. We discuss their ability to reduce organic, inorganic, and biological fouling by several mechanisms, including control over the membrane’s surface morphology, electrostatic rejection, piezoelectric vibrations, electrochemical reactions, and local pH changes. Next, we examine the use of ERMs for permselectivity modification, which allows for the optimization of rejection and control over ion transport through the application of electrical potentials and the use of electrostatically charged membrane surfaces. In addition, electrochemical reactions coupled with membrane filtration are examined, including electro-oxidation and electro-Fenton reactions, demonstrating the capability of ERMs to electro-oxidize organic contaminates with high efficiency due to high surface area and reduced mass diffusion limitations. When applicable, ERM applications are compared with commercial membranes in terms of energy consumptions. We conclude with a brief discussion regarding the future directions of ERMs and provide examples of several applications such as pore size and selectivity control, electrowettability, and capacitive deionization. To provide the reader with the current state of knowledge, the review focuses on research published in the last 5 years.

Anti-fouling performance and mechanism of anthraquinone/polypyrrole composite modified membrane cathode in a novel MFC–aerobic MBR coupled system

An anti-fouling MFC–MBR coupled system was developed to mitigate membrane fouling through electrostatic repulsion and the in situ self-sustainable heterogeneous electro-Fenton process.