Highly water-selective hybrid membrane by incorporating g-C3N4 nanosheets into polymer matrix

Microenvironment modulation of two-dimensional defective carbon nitride with extended nanoporous furnished oxygen-enriched sites for efficient recovery of rare earth elements

Efficient recovery of rare earth elements (REEs) from wastewater is crucial for environmental remediation and the sustainable development of resources. Nevertheless, achieving efficient and selective REEs extraction in the systems containing low-concentration REEs and high-concentration competing metal ions remains a challenge. Here, we report on the fabrication of two-dimensional defective carbon nitride (DGCN-K) with extended nanoporous furnished oxygen-enriched sites, which is achieved through re-arrangement of framework structural unit using a flexible polycondensation-ion-thermal strategy. The extended nanoporous and continuous transmission nanochannels establish a dedicated structure microenvironment surrounding the active sites center, promoting the effective ion diffusion and increasing the accessibility of active sites. Meanwhile, the incorporation of abundant electronegative cyano and hydroxyl group modifies coordination microenvironment, improving hydrophilicity and strengthening interaction affinity with REEs. Consequently, DGCN-K shows excellent REEs adsorption performance, achieving high adsorption capacity (Nd(III) 146.25 mg/g, Dy(III) 180.82 mg/g, Lu(III) 204.34 mg/g,) within short adsorption equilibrium time (30 min). Furthermore, DGCN-K possesses high REEs selective removal rate in the mixed binary system and actual leaching tailings. This study provides a feasible microenvironment regulation strategy for the construction of 2D defective carbon nitride with oxygen-enriched sites and extended nanoporous for synergistically enabling efficient recovery of REEs.

Remarkable improvement in drilling fluid properties with graphitic-carbon nitride for enhanced wellbore stability

This study examines the viability of using graphitic-Carbon Nitride (g-C3N4) nanomaterial as shale stabilizer drilling fluid additive having applications in the oil and gas wells drilling. Shale stability is important especially when drilling horizontal and extended reach wells with water-based muds (WBM) to tap unconventional reservoirs namely shale oil and shale gas. For this study, the g-C3N4 nanomaterial was produced by melamine pyrolysis, and characterized by X-Ray Diffraction, Scanning Electron Microscopy and Fourier Transform Infrared spectroscopy techniques. The developed g-C3N4 was used to formulate the WBM and its impact on the formulated mud system's rheological and filtration control characteristics as well as on shale stability was examined. In comparison to the base mud, the treated mud showed lower Fluid Loss (FL) and higher thermal stability. FL was reduced by 41.8 % and 68 % under Before Hot Rolling (BHR) and After Hot Rolling (AHR) conditions, respectively, with a maximum cake thickness of 1 mm. The Yield Point was improved by 52 % and 66 % under BHR and AHR conditions, respectively. The increase in Plastic Viscosity, and Apparent Viscosity was 23.8 %, and 38 %, respectively. Shale recovery was 99.6 % in g-C3N4 treated fluid compared to 88 % in the base fluid. The treated shale Brunauer-Emmett-Teller (BET) surface area and the pore volume were significantly reduced compared to the pure shale, indicating significant plugging of shale nano- and micro-pores. The BET surface area of the g-C3N4 treated shale sample was 0.0405 m2/g compared to pure shale sample's surface area 0.3501 m2/g. Correspondingly, the pore volume of treated shale was 0.000029 cm3/g compared to the pure shale sample's pore volume 0.000911 cm3/g. Therefore, based on the experimental results obtained, it is inferred that the developed g-C3N4 nanomaterial has potential applications in WBM systems for drilling long shale sections.

A High-Quality Mixed Matrix Membrane with Nanosheets Assembled and Uniformly Dispersed Fillers for Ethanol Recovery

A high-quality filler within mixed matrix membranes, coupled with uniform dispersity, endows a high-efficiency transfer pathway for the significant improvement on separation performance. In this work, a zeolite-typed MCM-22 filler is reported that is doped into polydimethylsiloxane (PDMS) matrix by ultrafast photo-curing technique. The unique structure of nanosheets assembly layer by layer endows the continuous transfer channels towards penetrate molecules because of the inter-connective nanosheets within PDMS matrix. Furthermore, an ultrafast freezing effect produced by fast photo-curing is used to overcome the key issue, namely filler aggregation, and further eliminates defects. When pervaporative separating a 5 wt% ethanol aqueous solution, the resulting MCM-22/PDMS membrane exhibits an excellent membrane flux of 1486 g m-2 h-1 with an ethanol separation factor of 10.2. Considering a biobased route for ethanol production, the gas stripping and vapor permeation through this membrane also shows a great enrichment performance, and the concentrated ethanol is up to 65.6 wt%. Overall, this MCM-22/PDMS membrane shows a high separation ability for ethanol benefited from a unique structure deign of fillers and ultrafast curing speed of PDMS, and has a great potential for bioethanol separation from cellulosic ethanol fermentation.

Tempospatially Confined Catalytic Membranes for Advanced Water Remediation

The application of homogeneous catalysts in water remediation is limited by their excessive chemical and energy input, weak regenerability, and potential leaching. Heterogeneous catalytic membranes (CMs) offer a new approach to facilitate efficient, selective, and continuous pollutant degradation. Thus, integrating membranes and continuous filtration with heterogeneous advanced oxidation processes (AOPs) can promote thermodynamic and kinetic mass transfers in spatially confined intrapores and facilitate diffusion-reaction processes. Despite the remarkable advantages of heterogeneous CMs, their engineering application is practically restricted due to the fuzzy design criteria for specific applications. Herein, the recent advances in CMs for advanced water remediation are critically reviewed and the design flow for tempospatially confined CMs is proposed. Further, state-of-the-art CM materials and their catalytic mechanisms are reviewed, after which the tempospatial confinement mechanisms comprising the nanoconfinement effect, interface effect, and kinetic mass transfer are emphasized, thus clarifying their roles in the construction and performance optimization of CMs. Additionally, the fabrication methods for CMs based on their catalysts and pore sizes are summarized and an overview of their application and performance evaluations is presented. Finally, future directions for CMs in materials research and water treatment, are presented.

Optimization of Water Based Drilling Fluid Properties with the SiO2/g-C3N4 Hybrid

Drilling fluids are an essential component of drilling operations in the oil and gas industry. Nanotechnology is being used to develop advanced drilling fluid additives. This study looked at the viability of synthesizing SiO2/g-C3N4 hybrid extending the Stober process followed by its addition in different concentrations to water-based drilling fluids and studying impact on the rheological and fluid loss properties of the fluids. The synthesized hybrid was analyzed using XRD, SEM, TGA, and FTIR. Subsequently, it was used to develop the water-based drilling mud formulations and subjected to measurements in accordance with API standard practices. The studies were carried out at various SiO2/g-C3N4 nanoparticle concentrations under before hot rolling (BHR) and after hot rolling (AHR) conditions. The outcomes demonstrated that the rheological and fluid loss properties were enhanced by the addition of SiO2/g-C3N4 nanoparticles, as it worked in synergy with other additives. Additionally, it was discovered that the nanoparticles improved the drilling fluid thermal stability. The experimental findings indicate a significant influence of SiO2/g-C3N4 nanoparticles on base fluid properties including rheology and fluid loss as the most remarkable, especially at higher temperatures. The significant improvements in yield point and 10 s gel strength were 55 and 42.8% under BHR and 216 and 140% under AHR conditions, respectively. Permeability plugging test (PPT) fluid loss was reduced by 69.6 and 87.2% under BHR and AHR conditions, respectively, when 0.5 lb/bbl nanoparticles were used in formulations. As a result, SiO2/g-C3N4 nanomaterial has the potential to be used as drilling fluid additive in water-based drilling fluids.

Modification of PAN electrospun nanofiber membranes with g-C3N4 nanotubes/carbon dots to enhance MBR performance

This study is dedicated to the enhancement of electrospun polyacrylonitrile (PAN) nanofiber membranes for their application in membrane bioreactor (MBR) processes. The improvement is achieved through the incorporation of graphitic carbon nitride nanotubes/carbon dots (g-C3N4 NT/CDs) and subsequent heat post-treatments at varying temperatures. Notably, the hot-pressing methodology effectively mitigates surface roughness and significantly reduces issues related to peeling during nanofiber experimentation. Our results demonstrate that the introduction of 0.5 wt% of g-C3N4 NT/CDs leads to a substantial enhancement in water flux. In particular, nanocomposite membranes subjected to hot-pressing at 90 °C for 10 min exhibited an impressive flux recovery ratio (FRR) of 70%. Furthermore, the heat-treated nanocomposite membranes exhibited remarkable antifouling properties and significantly reduced fouling rates when compared to their heat-treated bare counterparts. This study underscores the noteworthy potential of g-C3N4 NT/CDs-modified PAN nanofiber membranes to substantially elevate MBR performance, firmly positioning them as highly promising candidates for critical applications in the domains of water and wastewater treatment. However, it is imperative to underscore that the existing written material necessitates a comprehensive overhaul to align with the provided structural framework.

Synergistic pervaporation dehydration of ethanol/water mixture: Exploring the potential of a covalently designed hybrid membrane structure of polyacrylic acid grafted carbon nitride and polyvinyl alcohol

Polyacrylic acid (PAA) grafted CN sheet (P-g-CN) was synthesized to enhance the dispersive properties of carbon nitride (CN) in the membrane. A successful PAA grafting to the CN was confirmed from FTIR, TGA, and Zeta potential and XRD analyses. The A PVA membrane embedded P-g-CN, including a covalently constructed polymer-filler network, was developed to separate ethanol-water mixtures using pervaporation (PV). XPS study has confirmed a covalent attachment of P-g-CN sheets to the PVA matrix. Thereby, a defect-free membrane matrix was observed in the FESEM analysis. A 10 wt% loaded PVA-P-g-CN10 composite membrane was compared to the pristine PVA membrane, demonstrating improved PV dehydration performance. The flux decreased from 0.21 kg/m2h of pristine PVA membrane to 0.17 kg/m2h of PVA-P-g-CN10 membrane, while the separation factor improved from 49 to 176 in a 90/10 wt % ethanol/water feed at 40 °C. This improvement can be attributed to the selective diffusion of water through the P-g-CN interlayer spacing and tiny triangular nanopores in the s-triazine network, along with their dispersibility in the PVA matrix, resulting in well-ordered membrane morphology. Furthermore, PVA-P-g-CN10 exhibited higher water permeance (43.31-86.07 GPU) than ethanol (1.18-10.47 GPU) as the feed temperature increased from 30 to 70 °C, suggesting P-g-CN successfully inhibits swelling in the feed solution through proper interaction with PVA. In a long-term PV test lasting 250 h, the PVA-P-g-CN10 membrane displayed excellent structural stability and maintained its performance.

Surface Segregation Methods toward Molecular Separation Membranes

As a highly promising approach to solving the issues of energy and environment, membrane technology has gained increasing attention in various fields including water treatment, liquid separations, and gas separations, owing to its high energy efficiency and eco-friendliness. Surface segregation, a phenomenon widely found in nature, exhibits irreplaceable advantages in membrane fabrication since it is an in situ method for synchronous modification of membrane and pore surfaces during the membrane forming process. Meanwhile, combined with the development of synthesis chemistry and nanomaterial, the group has developed surface segregation as a versatile membrane fabrication method using diverse surface segregation agents. In this review, the recent breakthroughs in surface segregation methods and their applications in membrane fabrication are first briefly introduced. Then, the surface segregation phenomena and the classification of surface segregation agents are discussed. As the major part of this review, the authors focus on surface segregation methods including free surface segregation, forced surface segregation, synergistic surface segregation, and reaction-enhanced surface segregation. The strategies for regulating the physical and chemical microenvironments of membrane and pore surfaces through the surface segregation method are emphasized. The representative applications of surface segregation membranes are presented. Finally, the current challenges and future perspectives are highlighted.

Merging Proline:Xylitol Eutectic Solvent in Crosslinked Chitosan Pervaporation Membranes for Enhanced Water Permeation in Dehydrating Ethanol

The scope of this research aims at merging a new deep eutectic mixture (DES) into a biopolymer-based membrane for a pervaporation application in dehydrating ethanol. Herein, an L-proline:xylitol (at 5:1) eutectic mixture was successfully synthesized and blended with chitosan (CS). A complete characterization of the hybrid membranes, in terms of morphology, solvent uptake, and hydrophilicity, has been conducted. As part of their applicability, the blended membranes were assayed for their ability to separate water from ethanolic solutions by means of pervaporation. At the highest temperature (50 °C), a water permeation of ca. 0.46 kg m^-2 h^-1 was acquired, representing a higher permeation than the pristine CS membranes (ca. 0.37 kg m^-2 h^-1). Therefore, CS membranes demonstrated an enhanced water permeation thanks to their blending with the hydrophilic L-proline:xylitol agent, making these membranes a good candidate for other separations containing polar solvents.

Double-charged self-assembled rGO/g-C3N4 membrane prepared by "functional group substitution" for heavy metal ions rejection at low pressure

Heavy metals are still the critical pollutants in industrial wastewater and there is an urgent need for efficient and environmentally friendly treatment technologies. Reduced graphene oxide (rGO) is widely used for preparations of nanofiltration (NF) membranes but suffers from poor hydrophilicity and electronegativity. In this work, a double-charged rGO/g-C₃N₄-P membrane was prepared for removal of heavy metals at low pressure. Graphitic carbon nitride (g-C₃N₄) assisted reduction of GO membranes under ultraviolet (UV) irradiation, and the modification of functional groups with high polarity improved the hydrophilicity of membrane surface. The filtration performance for heavy metals of rGO/g-C₃N₄-P membrane was evaluated under low pressure (1-2 bar). The rejection rates of Cu²⁺, Cr³⁺, Mn²⁺, Cd²⁺, and Pb²⁺ by membranes reduced by UV for 18 h (rGO/g-C₃N₄-18-P membrane) reached 94.72 %, 98.05 %, 82.32 %, 88.2 % and 77.15 %, respectively. In the experiment of mixed simulated wastewater, the rejection rates of NO₃^- and SO₄^2- both reached >95 %. Outstanding rejection rates were attributed to the interaction and the synergy effect of double-charged layers as well as steric effects. Meanwhile, the water flux of rGO/g-C₃N₄-18-P membrane was as high as 37.14-50.16 L m^-2h^-1bar^-1 (1-2 bar). The high flux was due to the reduced degree of oxidation so that water molecules transported between GO nanochannels more smoothly and the transport path was shortened through the nanopores of g-C₃N₄. Obviously, flux and heavy metal rejection of rGO/g-C₃N₄-18-P membrane were simultaneously improved, breaking "trade-off" effect. Furthermore, rGO/g-C₃N₄-18-P membrane showed excellent antifouling ability and the potential for heavy metal wastewater filtration in comparison with other NF membranes reported in literature.

Laser-Assisted Scalable Pore Fabrication in Graphene Membranes for Blue-Energy Generation

The osmotic energy from a salinity gradient (i. e. blue energy) is identified as a promising non-intermittent renewable energy source for a sustainable technology. However, this membrane-based technology is facing major limitations for large-scale viability, primarily due to the poor membrane performance. An atomically thin 2D nanoporous material with high surface charge density resolves the bottleneck and leads to a new class of membrane material the salinity gradient energy. Although 2D nanoporous membranes show extremely high performance in terms of energy generation through the single pore, the fabrication and technical challenges such as ion concentration polarization make the nanoporous membrane a non-viable solution. On the other hand, the mesoporous and micro porous structures in the 2D membrane result in improved energy generation with very low fabrication complexity. In the present work, we report femtosecond (fs) laser-assisted scalable fabrication of μm to mm size pores on Graphene membrane for blue energy generation for the first time. A remarkable osmotic power in the order of μW has been achieved using mm size pores, which is about six orders of magnitudes higher compared to nanoporous membranes, which is mainly due to the diffusion-osmosis driven large ionic flux. Our work paves the way towards fs laser-assisted scalable pore creation in the 2D membrane for large-scale osmotic power generation.

The dehydration performance and sorption behavior of PVA/silica hybrid pervaporative membrane

A polyvinyl alcohol (PVA)/SiO2 organic-inorganic hybrid membrane was fabricated, using PVA as the basic material, SiO2 nanoparticles as the inorganic material, γ-(2,3)-glycidoxy propyl trimethoxysilane (GPTMS) and 3-aminopropyl triethoxysilane (APTEOS) as the second modified agents. The dehydration performance of PVA-SiO2/polyacrylonitrile (PAN) composite membrane to ethyl acetate (EA)/H2O, EA/ethanol (EtOH)/H2O and EA/EtOH/acetic acid (HAc)/H2O solutions was investigated. After modification of the second coupling agent of APTEOS or GPTMS, PVA-SiO2/PAN composite membrane had the better dehydration performance to these aqueous solutions. When dehydrating PVA-SiO2/PAN composite membrane modified by GPTMS (M5 membrane) in EA/H2O binary solution (98/2, wt%) at 40°C, the separation factor and the total permeation flux were 5245 and 293.9 g m−2 h−1, respectively. The preparation method of PVA/SiO2 membrane through adding the second coupling agent was simple, it had good dehydration performance and has excellent application prospects. The sorption behavior of PVA/SiO2 hybrid membrane was systematically studied, providing sufficient data for studying the separation mechanism of pervaporative membrane. The degree of swelling (DS) and the sorption selectivity of the membrane in different feed compositions and temperatures were measured to determine the static sorption of membrane. Dynamic sorption more clearly reflects the sorption and swelling processes of the membrane, and the dynamic sorption curves of the membrane in EA aqueous solutions were obtained. The sorption behavior of membrane to permeate components was studied by ATR-FTIR. Changes in the characteristic peaks for the permeate components and membrane indicated the sorption behavior of the membrane.

Effect of MoS2 Yolk-Shell Nanostructure on the Thiophene Separation Performance of PEG Membrane

Constructing facilitated transport based on π-complexation has been drawing more and more attention in mixed matrix membranes (MMMs) for pervaporative desulfurization. Herein, a unique molybdenum disulfide (MoS2) yolk-shell nanostructure (MYNS) was prepared and incorporated into the polyethylene glycol (PEG) matrix to fabricate MMMs for model gasoline desulfurization by PV. Moreover, the effects of MYNS content, feed sulfur concentration, and feed temperature on the performance of PEG/MYNS MMMs were evaluated. It was found that there is good interfacial compatibility between the MYNS filler and the PEG matrix, and the resultant MMMs show enhanced swelling resistance against thiophene. The PV results revealed that the as-fabricated MMMs are thiophene-selective, and their desulfurization performance in the pervaporative removal of thiophene from n-octane is remarkably evaluated due to the addition of MYNS. The MMMs display the highest sulfur enrichment factor of 4.02 with an associated permeation flux of 2587 g·m−2·h−1 with the MYNS loading of 3 wt. % when carrying out in an n-octane and thiophene (500 μg·g−1) mixture at 343 K. Furthermore, a consistent increment in the permeation flux accompanied with a continuous reduction in the enrichment factor was observed with increasing the feed sulfur concentration and feed temperature. This work may offer great potential for practical gasoline desulfurization applications.

Design and development of an automated experimental setup for ion transport measurements

The ion transport measurements using various ion-exchange membranes (IEMs) face several challenges, including controllability, reproducibility, reliability, and accuracy. This is due to the manual filling of the solutions in two different reservoirs in a typical diffusion cell experiment with a random flow rate, which results in the diffusion through the IEM even before turning on the data acquisition system as reported so far. Here, we report the design and development of an automated experimental setup for ion transport measurements using IEMs. The experimental setup has been calibrated and validated by performing ion transport measurements using a standard nanoporous polycarbonate membrane. We hope that the present work will provide a standard tool for realizing reliable ion transport measurements using ion-exchange membranes and can be extended to study other membranes of various pore densities, shapes, and sizes.

Effect of carbon nitride synthesized by different modification strategies on the performance of carbon nitride/PVDF photocatalytic composite membranes

Carbon nitride (CN)/polyvinylidene fluoride (PVDF) photocatalytic composite membrane (PCM) is considered as a promising candidate to improve the anti-fouling characteristic of conventional PVDF membrane and overcome the difficulty encountered during recovery of powder catalyst simultaneously. However, the effects of differently-modified CN on PCM and its mechanism are still unclear. In this study, bulk-CN (BCN), carbon defects CN (CCN), nitrogen defect CN (DCN), mesoporous CN (MCN), and nitrogen-rich CN (NCN) were incorporated into PVDF by phase inversion method. The influence of changes in the physical and chemical properties of CN, including hydrophilic groups, photocatalytic activity, and particle size, on the permeability, anti-fouling characteristic, and photocatalytic self-cleaning activity of CN/PVDF was systematically analyzed. The mechanism of excellent performance of PCM was revealed by experimental test and theoretical calculation. The flux of PCM was significantly improved by increasing the hydrophilic group on modified CN. However, the differences in particle size and interaction between different types of modified CN and PVDF chains endowed the CN/PVDF with different porosity. DCN/PVDF showed high porosity and hydrophilicity, leading to high water flux and rejection rate of 293.6 L (m² h)^-1 and 90.1%, respectively. Compared to pure PVDF, the flux recovery rate of DCN₃₀/PVDF increased by 27.6%, and the irreversible fouling decreased from 36.9% to 9.2%. The modified CN/PVDF showed excellent photocatalytic activity for the removal of cefotaxime (CFX) and E. coli. Owing to the narrow band gap of DCN, large specific surface area, and low photogenerated carrier recombination rate, the CFX removal rate reached 99% in 2 h, and E. coli inactivation achieved 3.7 log within 4 h via DCN₃₀/PVDF.

Semiconducting graphitic carbon nitride integrated membranes for sustainable production of clean water: A review

Semiconducting membranes integrated with nanomaterials have placed themselves in new emerging researches tremendously for seawater desalination, oil-water separation, disinfection, removal of inorganic as well as organic pollutants. Howbeit, only nanoparticles unified membranes show quite a lot lags in their performance, although some of these particles associated with the demerits of high cost. In contrast, graphitic carbon nitride incorporated membranes offered improved aforementioned properties corresponding to absolute essential qualities such as cost-effective, environmentally friendly, easy-to-operate, green manufacturing, anti-fouling, and low energy consumption. Moreover, their high mechanical strength, high stability against harsh environment and long-term utilization without flux reduction are strong plus. Even though there are some undeniable downsides of these membranes in real world applications as bulk synthesis, consistent dispersion of graphitic carbon nitride, low photocatalytic efficiency etc. Accordingly, in the present article, these frailties of the membranes having graphitic carbon nitride as a filler and their respective synthesis procedures and properties are discussed. A comprehensive analysis over the application of semiconducting graphitic carbon nitride incorporated membranes with and without special surface modification; and exploration of the future challenges and difficulties associated to these membranes are also reviewed. Consequently, the current article provides brief overview about graphitic carbon nitride integrated composite membranes as well as their applications, and it finished up with new thoughts of further improvements/modifications to overcome their shortcomings in actual environmental conditions.

An overview on the progress and development of modified sulfonated polyether ether ketone membranes for vanadium redox flow battery applications

Vanadium redox flow batteries (VRFB) are among the most promising approaches to efficiently store renewable energies. In such battery type, Nafion is commonly used as membrane material but suffers from high vanadium crossover and cost. These drawbacks negatively influence the widespread commercial application of VRFBs. Alternative membrane materials with high performance and low cost are thus being developed to address these shortfalls. Among those, possible materials for the VRFB membrane is sulfonated polyether ether ketone (SPEEK), which recently attracted considerable attention due to its low cost, combined with mechanical and chemical stability, and ease of preparation. This review summarizes the research activities related to the development of SPEEK-based membranes for VRFB applications and gives an overview of the properties of PEEK and its sulfonated form. A critical analysis on the challenges of SPEEK-based membranes is also discussed.

Hydrogen peroxide treated g-C3N4 as an effective hydrophilic nanosheet for modification of polyethersulfone membranes with enhanced permeability and antifouling characteristics

In this study, first, graphitic carbon nitride was treated with hydrogen peroxide (abbreviated as H₂O₂-g-C₃N₄), then was used as a new hydrophilic nanomaterial in the fabrication of polyethersulfone (PES) mixed matrix membrane (MMM) for improving flux, protein and dye separation efficiency and antifouling properties. The H₂O₂-g-C₃N₄ nanosheet was inserted into the doping solution to fabricate PES/H₂O₂-g-C₃N₄ nanocomposite membrane with the non-solvent induced phase inversion procedure. The results of the SEM and AFM images and also porosity and contact angle analysis were indicated that the modified membranes with H₂O₂-g-C₃N₄ had more porosity, smoother surface and more hydrophilic. Also, the influence of various weight percentage of H₂O₂-g-C₃N₄ was investigated systematically on the membrane performance. By blending of H₂O₂-g-C₃N₄ nanosheet in the membrane matrix, the permeability was raised from 4.1 (for bare membrane) to 30.1 L m^-2 h^-1 bar^-1. Additionally, the effect of the H₂O₂-g-C₃N₄ material on the antifouling features indicated that the flux recover ratio of the H₂O₂-g-C₃N₄ MMMs was improved and the resistance parameters were reduced. Also, the effect of the H₂O₂-g-C₃N₄ material on the antifouling features indicated that the flux recover ratio of the H₂O₂-g-C₃N₄ MMMs was improved and the resistance parameters were reduced. Finally, the dye rejection efficiency of the nanocomposite membranes for Orange II and Reactive Yellow 168 was improved. As a result, it could be mentioned that the mixing low amount of H₂O₂-g-C₃N₄ in the membrane structure could significantly improve the membrane flux and antifouling properties without reduction in membrane rejection efficiency.

Emerging graphitic carbon nitride-based membranes for water purification

Membrane separation is a promising technology that can effectively remove various existing contaminants from water with low energy consumption and small carbon footprint. The critical issue of membrane technology development is to obtain a low-cost, stable, tunable and multifunctional material for membrane fabrication. Graphitic carbon nitride (g-C₃N₄) has emerged as a promising membrane material, owing to the unique structure characteristics and outstanding catalytic activity. This review paper outlined the advanced material strategies used to regulate the molecule structure of g-C₃N₄ for membrane separation. The presentative progresses on the applications of g-C₃N₄-based membranes for water purification have been elaborated. Essentially, we highlighted the innovation integration of physical separation, catalysis and energy conversion during water purification, which was of great importance for the sustainability of water treatment techniques. Finally, the continuing challenges of g-C₃N₄-based membranes and the possible breakthrough directions in the future research was prospected.