Antifouling polyimide membrane with surface-bound silver particles

Synthesis, Characterization, and Antimicrobial and Nematicidal Activities of Chitosan-Based Silver-Doped Titanium Dioxide

Chitosan (Cs)-based silver-doped titanium dioxide (Cs-AgTiO₂) films were synthesized intending their end-use application in food packaging. AgTiO₂ NPs were successfully prepared by using electrochemical synthesis. Cs-AgTiO₂ films were synthesized by using the solution casting technique. Various advanced instrumental techniques such as scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR) were used for the characterization of Cs-AgTiO₂ films. Intending their food packaging applications, samples were further investigated to obtain varied biological results including antibacterial (Escherichia coli), antifungal (Candida albicans), and nematicidal activities. Ampicillin (E. coli) and fluconazole (C. albicans) were used as models. FT-IR and XRD confirm the structural modification of Cs. IR peak shifting was observed, which confirmed that AgTiO₂ interacted with chitosan via amide I and amide II groups. This confirmed the stability of the filler in the polymer matrix. SEM also confirmed the successful incorporation of AgTiO₂ NPs. Cs-AgTiO₂ (3%) shows excellent antibacterial (16.51 ± 2.10 μg/mL) and antifungal (15.67 ± 2.14 μg/mL) activities. Nematicidal assays were also done, and Caenorhabditis elegans (C. elegans) was used as a model organism. Cs-AgTiO₂ NPs (3%) exhibited excellent nematicidal potential (64.20 ± 1.23 μg/mL), which could make these films a suitable novel material to control nematode spread in food.

In situ fabrication of silver/polyimide composite films with enhanced heat dissipation

In this study, silver/polyimide (Ag/PI) composite films with enhanced heat dissipation properties were prepared. Ag was formed in situ by reducing AgNO₃ at various locations according to the reduction method. Two different types of soluble PIs capable of solution processing were used, namely Matrimid and hydroxy polyimide (HPI). Unlike Matrimid with bulky substituents, HPI with polar hydroxy groups formed ion-dipole interactions with Ag ions to form Ag particles with uniform size distribution. The location and distribution of Ag particles affect the heat emission characteristics of the composite films, resulting in better heat dissipation properties with the thermally and photochemically reduced Ag/HPI films having more Ag particles distributed inside of the films than the chemically reduced films.

Antibacterial behaviour of surface modified composite polyamide nanofiltration (NF) membrane by immobilizing Ag-doped TiO2 nanoparticles

Modification of active membrane surface is an auspicious way to enhance the membrane performance. In our study, a commercially available composite polyamide Nanofiltration (NF) membrane was modified by immobilizing silver doped TiO₂ (Ag-TiO₂) nanoparticles. Ag-TiO₂ with different nanoparticles concentration (0.05, 0.1, and 0.5 wt. %) were coated on the surface of the membrane by a dip coating method. The evidence of successful coating was evaluated by Scanning Electron Microscopy coupled with Energy Dispersive Spectroscopy and Atomic Force Microscopy images. Moreover, the Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR), contact angle measurement and permeation tests were carried out in order to evaluate the membrane performance after coating. The antifouling property of the modified membrane was evaluated for Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria by colony counting method. The results indicated that the modified membranes keep efficient antibacterial efficacy against both types of bacteria. The bacterial growth reduced approximately 93% and 91% on the modified membrane as compared to the unmodified membrane for E.coli and B.subtilis, respectively. Ag-TiO₂ nanoparticles imbedded nanofiltration membranes inhibit the biofilm formation and facilitate in cleaning membrane surface without using excessive chemical agents.

Magnetic field assisted preparation of PES-Ni@MWCNTs membrane with enhanced permeability and antifouling performance

Multiple wall carbon nanotubes (MWCNTs), as an excellent material, have been used in various applications including preparation of polymer-MWCNTs composite membranes. However, few reports have combined the magnetic Ni@MWCNTs with polyether sulfone (PES) membrane to improve its antifouling performance to humic acid (HA), sodium alginate (SA), bovine serum albumin (BSA) and yeast (YE) solutions. In this study, the Ni@MWCNTs was generated by immersing MWCNTs into Ni²⁺ solution where in-situ reduction reaction was launched by the adsorbed Ag⁺ on MWCNTs. Since the loaded Ni endowed magnetism to MWCNTs, the Ni@MWCNTs can be easily attracted onto the membrane surface by an external magnetic field during the phase inversion process. The morphology measurements confirmed that the Ni@MWCNTs headed out of the PES-Ni@MWCNTs membrane surface. Because the MWCNTs played a role of free channels for water molecules, the composite membrane water flux reached to threefold flux of the pristine membrane. Moreover, the PES-Ni@MWCNTs membranes displayed the obviously enhanced antifouling ability during all the three alternative filtration cycles of water and BSA, SA, YE and HA solutions. In addition, the optimal PES-Ni@MWCNTs membrane demonstrated a flux recovery rate (FRR) of 67.89%, 85.53%, 60.28 and 90.12% for BSA, SA, YE and HA, respectively, which were not only much higher than that of the pristine membrane, but also exhibited significant improvements comparing with the previous studies. Further results of extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory indicated that the modified membrane possessed advantageous interaction energies with contaminant molecules over the pristine membrane.

Thiol-Affinity Immobilization of Casein-Coated Silver Nanoparticles on Polymeric Membranes for Biofouling Control

Silver nanoparticles (AgNPs) have been widely studied for the control of biofouling on polymeric membranes due to their antimicrobial properties. However, nanoparticle leaching has posed a significant impediment against their widespread use. In this study, a one-step method of chemically embedding AgNPs on cellulose acetate (CA) membranes via their affinity to thiol group chemistry was investigated. The operational efficiency of the membranes was then determined via filtration and biofouling experiments. During filtration study, the average flux values of pure CA membranes was determined to be 11 ± 2 L/(m2·hr) (LMH), while membranes embedded with AgNPs showed significant increases in flux to 18 ± 2 LMH and 25 ± 9 LMH, with increasing amounts of AgNPs added, which is likely due to the NPs acting as pore formers. Leaching studies, performed both in dead-end and crossflow filtration, showed approximately 0.16 mg/L leaching of AgNPs after the first day of filtration, but afterwards the remaining chemically-attached AgNPs did not leach. Over 97% of AgNPs remained on the membranes after seven days of crossflow leaching filtration studies. Serratia marcescens were then used as target microorganisms in biofouling studies. It was observed that membranes embedded with AgNPs effectively suppressed the growth of Serratia marcescens, and specifically, membranes with AgNPs displayed a decrease in microbial growth by 59% and 99% as the amount of AgNP increased.

Noninvasive Subcellular Imaging Using Atomic Force Acoustic Microscopy (AFAM)

We report an imaging approach applying the atomic force acoustic microscopy (AFAM), which has unique potential for nondestructive imaging of cell internal structures. To obtain high spatial resolution images, we optimized the significant imaging parameters, including scanning speeds, feedback configurations and acoustic frequencies of an AFAM system, to increase the amplitude of the acoustic signal and to stabilize the morphological signals. We also combined the acoustic amplitude and phase signals, and generated pseudo-color figures for better illustration of subcellular features such as pseudopodia, membranes and nucleus-like. The subcellular structural image atlas can describe nanoscale details of multiple samples and provide clearer images of the subcellular features compared to other conventional techniques. This study builds a strong basis of transmission AFAM for cell imaging, which can help researchers to clarify the cell structures in diverse biological fields and push the understanding of biology evolution to a new stage.

Versatile Surface Modification of TFC Membrane by Layer-by-Layer Assembly of Phytic Acid-Metal Complexes for Comprehensively Enhanced FO Performance

Polyamide TFC membranes are widely applied in membrane-based water treatment but generally suffer various fouling problems. In this work, the layer-by-layer assembly of phytic acid (PA) and metal ions (M) is constructed on the surface TFC membrane for the first time, to improve the bio/organic fouling resistances and separation performance of TFC membranes simultaneously. The PA molecule with six phosphonic acid groups of strong chelation ability acts as the organic ligand, and the metal ion acts as the inorganic cross-linker, inducing the assembly of hydrophilic and antibacterial PA-M (Ag or Cu) complexes on the TFC membrane surface. Various characterizations including FTIR, XPS, SEM, AFM, and EDX are employed to confirm the successful and uniform modification of PA-M. FO performance of the PA-M modified TFC membranes, i.e., TFC_PA-Ag and TFC_PA-Cu, is optimized by varying PA concentration and assembly cycles, where the water flux can be improved by 57% and 68%, respectively, without compromising the membrane selectivity. Additionally, the PA-M modification improves the biofouling and organic fouling resistances of the TFC membrane remarkably, owing to the enhanced antibacterial ability and hydrophilicity. The modified TFC membranes are also proven to show the excellent stability by the quantitative release test.

Mussel-Inspired Surface Functionalization of AEM for Simultaneously Improved Monovalent Anion Selectivity and Antibacterial Property

A facile membrane surface modification process for improving permselectivity and antimicrobial property was proposed. A polydopamine (PDA) coating was firstly fabricated on pristine anion exchange membrane (AEM), followed by in situ reduction of Ag without adding any extra reductant. Finally, 2,5-diaminobenzene sulfonic acid (DSA) was grafted onto PDA layer via Michael addition reaction. The as-prepared AEM exhibited improved permselectivity (from 0.60 to 1.43) and effective inhibition of bacterial growth. In addition, the result of the long-term (90-h continuous electrodialysis) test expressed the excellent durability of the modified layer on membrane surface, because the concentration of Cl- and SO₄²- in diluted chamber fluctuated ~0.024 and 0.030 mol·L-1 with no distinct decline. The method described in this work makes the full use of multifunctional PDA layer (polymer-like coating, in situ reduction and post-organic reaction), and a rational design of functional AEM was established for better practical application.

Enhancing Morphology and Separation Performance of Polyamide 6,6 Membranes By Minimal Incorporation of Silver Decorated Graphene Oxide Nanoparticles

Nanomaterials can be incorporated in the synthesis of membrane to obtain mixed-matrix membrane with marked improvement in properties and performance. However, stability and dispersion of the nanomaterials in the membrane matrix, as well as the need to use high ratio of nanomaterials for obvious improvement of membrane properties, remain a major hurdle for commercialization. Hence, this study aims to investigate the improvement of polyamide 6,6 membrane properties with the incorporation of silver nanoparticles decorated on graphene oxide (Ag-GO) nanoplates and at the same time focus is given to the issues above. Graphene oxide nanoplates were synthesized using the modified Hummers’ method and decorated with silver before embedded into the polyamide 6,6 matrix. Physicochemical characterizations were conducted on both nanoplates and the mixed-matrix Ag-GO polyamide 6,6 membrane. The issues of Ag agglomeration and leaching were not observed, which could be attributed to the decoration of Ag on GO that helped to disperse the nanomaterials and provided a better anchor point for the attachment of Ag nanoparticles. The synthesized membrane showed marked improvement regarding flux (135% increment) and antifouling (40% lower irreversible fouling), which could be ascribed to the more negative charge of membrane surface (−14 ± 6 to −31 ± 3.8 mV) and hydrophilicity (46% enhancement) of the membranes. With minimal embedment of Ag nanoparticles, the membrane showed superior antibacterial property where the E. coli bacteria could not form a single colony on the membrane surface. Overall, the decoration of Ag on GO nanoplates could be a promising approach to resolve the agglomeration and leaching issues as well as reduce the amount of precious Ag in the synthesis of Ag-GO polyamide 6,6 membrane.

A novel nanofiltration membrane with simultaneously enhanced antifouling and antibacterial properties

A novel nanofiltration membrane is prepared by using polydopamine (PDA) and hydroxyl propyl trimethyl ammonium chloride chitosan (HACC) mixed with chitosan (CN) and chelated silver (Ag) nanoparticles.