Graphene oxide quantum dots incorporated nanocomposite membranes with high water flux for pervaporative dehydration

Droplet Micro-Sensor and Detection of Respiratory Droplet Transmission

Droplet transmission is the primary infection route for respiratory diseases like COVID-19 and influenza, but small and low-cost wearable droplet detection devices are a significant challenge. Herein, a respiratory droplet micro-sensor based on graphene oxide quantum dots (GOQDs) assembled onto SiO2 microspheres by the nebulized natural deposition is presented. Benefiting from the energy dissipation of the microsphere to droplets, the sensor can detect droplets as far as 2 m from coughing. With this sensor, droplet signal variations caused by some factors like distance, speech, angles, and wind directions are explored, and the effectiveness of different protective measures in preventing droplet transmission is evaluated. This droplet detection technology is expected to be utilized for the development of personal detection and protection devices against infectious respiratory diseases.

Recent progress in tannin and lignin blended metal oxides and metal sulfides as smart materials for electrochemical sensor applications

Our technologically advanced civilization has made sensors an essential component. They have potential uses in the pharmaceutical sector, clinical analysis, food quality control, environmental monitoring, and other areas. One of the most active fields of analytical chemistry research is the fabrication of electrochemical sensors. An intriguing area of electroanalytical chemistry is the modification of electrodes using polymeric films. Due to their benefits, which include high adhesion to the electrode surface, chemical stability of the coating, superior selectivity, sensitivity, and homogeneity in electrochemical deposition, polymer-modified electrodes have attracted a great deal of interest in the electroanalytical sector. Conducting polymers are an important material for sensing devices because of their fascinating features, which include high mechanical flexibility, electrical conductivity, and the capacity to be electrochemically converted between electronically insulating and conducting states. Tannin or lignin nanomaterials can be an inter-linker leading to flexible and functional polymeric networks. There is a continuing demand for fast and simple analytical methods for the determination of many clinically important biomarkers, food additives, environmental pollutants etc. This review in a comprehensive way summarizes and discusses the various metal oxide and sulfide-incorporated tannin and lignin scaffolds using electrochemical sensing and biosensing.

Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration

Pervaporation is considered the most promising technology for dehydration of bioalcohols, attracting increasing attention as a renewable energy source. In this regard, the development of stable and effective membranes is required. In this study, highly efficient membranes for the enhanced pervaporation dehydration of ethanol were developed by modification of sodium alginate (SA) with a polyethylenimine (PEI) forming polyelectrolyte complex (PEC) and graphene oxide (GO). The effect of modifications with GO or/and PEI on the structure, physicochemical, and transport characteristics of dense membranes was studied. The formation of a PEC by ionic cross-linking and its interaction with GO led to changes in membrane structure, confirmed by spectroscopic and microscopic methods. The physicochemical properties of membranes were investigated by a thermogravimetric analysis, a differential scanning calorimetry, and measurements of contact angles. The theoretical consideration using computational methods showed favorable hydrogen bonding interactions between GO, PEI, and water, which caused improved membrane performance. To increase permeability, supported membranes without treatment and cross-linked were developed by the deposition of a thin dense layer from the optimal PEC/GO (2.5%) composite onto a developed porous substrate from polyacrylonitrile. The cross-linked supported membrane demonstrated more than two times increased permeation flux, higher selectivity (above 99.7 wt.% water in the permeate) and stability for separating diluted mixtures compared to the dense pristine SA membrane.

Carbon quantum dots (CQDs)-modified polymers: a review of non-optical applications

Carbon quantum dots (CQDs) are a promising candidate to replace metal-based additives for polymer reinforcement and functionalization. Specifically, vast interest in CQDs for polymer functionalization stems from their cost effectiveness, sustainable organic precursors, and their non-toxicity. Although several reviews of optical devices based on CQDs have been reported, this mini-review covers the non-optical aspects of CQD-polymer composites. Applications of CQD-modified polymers for smart devices, mechanical reinforcement, textile surface-modification methods, membranes, protective coatings, and thermal resistance are summarized. The synthesis method of CQDs, their dispersion in a polymer matrix and the underlying mechanisms related to the enhanced performance of composites are outlined. Unlike nano-reinforcements, CQDs are self-stabilized and offer an extremely high surface area, which significantly alters the polymer properties at a 1-2% concentration. Finally, a comparative analysis of recent advances in CQD-polymer composites, their problems, and future directions are discussed.

Recent Advancements in the Recovery and Reuse of Organic Solvents Using Novel Nanomaterial-Based Membranes for Renewable Energy Applications

The energy crisis in the world is increasing rapidly owing to the shortage of fossil fuel reserves. Climate change and an increase in global warming necessitates a change in focus from petroleum-based fuels to renewable fuels such as biofuels. The remodeling of existing separation processes using various nanomaterials is of a growing interest to industrial separation methods. Recently, the design of membrane technologies has been the most focused research area concerning fermentation broth to enhance performance efficiency, while recovering those byproducts to be used as value added fuels. Specifically, the use of novel nano material membranes, which brings about a selective permeation of the byproducts, such as organic solvent, from the fermentation broth, positively affects the fermentation kinetics by eliminating the issue of product inhibition. In this review, which and how membrane-based technologies using novel materials can improve the separation performance of organic solvents is considered. In particular, technical approaches suggested in previous studies are discussed with the goal of emphasizing benefits and problems faced in order to direct research towards an optimized membrane separation performance for renewable fuel production on a commercial scale.

Synergistic anti-inflammatory effects of graphene oxide quantum dots and trans-10-hydroxy-2-decenoic acid on LPS-stimulated RAW 264.7 macrophage cells

Graphene oxide quantum dots (GOQDs) have attracted substantial attention in numerous fields due to their unique physicochemical properties. However, their nanotoxicity and potential for use in biomedicine still require further study. In this work, the effects of GOQD and trans- 10-hydroxy-2-decenoic acid (10-HDA) cotreatment on the immune function of macrophages (RAW264.7 cells) were investigated. In particular, LC/MS-based metabolomics was performed to evaluate the effects of GOQDs on the metabolism of LPS-stimulated macrophages. Herein, we fabricated GOQDs with good dispersibility and a uniform size distribution of approximately 7 nm using a polyimide-pyrolyzed carbon film as the working electrode, a high-voltage graphite electrode as the cathode, and H₂O₂ as the oxidant. The GOQDs entered the macrophages and emitted green fluorescence under UV irradiation. Cotreatment with GOQDs and 10-HDA induced RAW 264.7 cell proliferation. GOQDs promoted the anti-inflammatory effect of 10-HDA on LPS-stimulated RAW264.7 cells and attenuated the secretion of TNF-α, IL-6, and IL-1β. The metabolites in RAW264.7 cells treated with GOQDs were significantly different from those in RAW264.7 cells treated with LPS. The enrichment analysis showed that treatment with GOQDs interfered with amino acid metabolism, and lipid metabolism. Our results demonstrate the role of GOQDs in macrophages and provide a basis for their further application in biomedical fields.

Enhanced oxygen reduction activity and high-quality effluent of membrane filtration electrodes with Prussian blue in microbial fuel cells

Membrane filtration electrode based microbial fuel cell provides a promising route to simultaneously recover energy and produce high-quality effluent during water treatment. Enhancing effluent quality and oxygen reduction reaction (ORR) activity of the membrane electrode still remains a major challenge. In this study, filtration types of membrane electrodes with Prussian blue (PB) doping and PVDF-PVC-PEG triblock copolymers were prepared by a simple phase inversion fabrication process. The PB-0.2 membrane electrode with optimal 0.2 wt% of PB obtained the highest current density (12.0 A m^-2) and the lowest charge transfer resistance (5.0 ± 0.1 Ω). Rotating disk electrode (RDE) results also demonstrated that the PB-0.2 catalyst exhibited the superior ORR activity with the highest number of transferred electrons (n = 3.90). Furthermore, the MFC with PB-0.2 produced the maximum power density of 1401 ± 17 mW m^-2, which was 186.5% higher than that of the control. Moreover, the filtrated effluent tCOD_eff was 20.6 ± 1.2 mg L^-1 for the PB-0.2, which was significantly reduced by 63% compared with the control. These results showed that the addition of PB was an effective strategy to enhance the overall oxygen reduction performance and improve effluent quality of microbial fuel cells.

Effect of biomass immobilization and reduced graphene oxide on the microbial community changes and nitrogen removal at low temperatures

The slow growth rate and high optimal temperatures for the anaerobic ammonium oxidation (anammox) bacteria are significant limitations of the anammox processes application in the treatment of mainstream of wastewater entering wastewater treatment plant (WWTP). In this study, we investigate the nitrogen removal and microbial community changes in sodium alginate (SA) and sodium alginate–reduced graphene oxide (SA-RGO) carriers, depending on the process temperature, with a particular emphasis on the temperature close to the mainstream of wastewater entering the WWTP. The RGO addition to the SA matrix causes suppression of the beads swelling, which intern modifies the mechanical properties of the gel beads. The effect of the temperature drop on the nitrogen removal rate was reduced for biomass entrapped in SA and SA-RGO gel beads in comparison to non-immobilized biomass, this suggests a ‘‘protective” effect caused by immobilization. However, analyses performed using next-generation sequencing (NGS) and qPCR revealed that the microbial community composition and relative gene abundance changed significantly, after the implementation of the new process conditions. The microbial community inside the gel beads was completely remodelled, in comparison with inoculum, and denitrification contributed to the nitrogen transformation inside the beads.

Dimensional Nanofillers in Mixed Matrix Membranes for Pervaporation Separations: A Review

Pervaporation (PV) has been an intriguing membrane technology for separating liquid mixtures since its commercialization in the 1980s. The design of highly permselective materials used in this respect has made significant improvements in separation properties, such as selectivity, permeability, and long-term stability. Mixed-matrix membranes (MMMs), featuring inorganic fillers dispersed in a polymer matrix to form an organic-inorganic hybrid, have opened up a new avenue to facilely obtain high-performance PV membranes. The combination of inorganic fillers in a polymer matrix endows high flexibility in designing the required separation properties of the membranes, in which various fillers provide specific functions correlated to the separation process. This review discusses recent advances in the use of nanofillers in PV MMMs categorized by dimensions including zero-, one-, two- and three-dimensional nanomaterials. Furthermore, the impact of the nanofillers on the polymer matrix is described to provide in-depth understanding of the structure-performance relationship. Finally, the applications of nanofillers in MMMs for PV separation are summarized.

A Particle-Driven, Ultrafast-Cured Strategy for Tuning the Network Cavity Size of Membranes with Outstanding Pervaporation Performance

Poly(dimethylsiloxane) (PDMS) membranes are widely used for bioethanol separation. However, the network cavity size r₃ of PDMS membranes is generally smaller than the ethanol kinetic radius (0.225 nm), which limits the transport of ethanol molecules and weakens the pervaporation performance. Herein, we proposed a particle-driven, ultrafast-cured strategy to overcome the above key issue: (1) Incorporating particles into PDMS for preventing polymer chains from packing tightly, (2) freezing particles within a PDMS layer by the ultrafast UV-cross-linking for improving its distribution and increasing the chain extension of the polymer, and (3) covalently bonding particles with PDMS to enhance their compatibility. Consequently, r₃ was increased to 0.262 nm, and an extremely high loading membrane (50 wt %) with an ultrashort curing time (20 s) was prepared, which is difficult to be realized by the conventional thermally driven approach. As a result, a separation factor of 13.4 with a total flux of 2207 g m^-2 h^-1 for separating ethanol from a 5 wt % aqueous solution at 60 °C was obtained. This strategy shows the feasibility of recovery of different bioalcohols and the large-scale continuous membrane preparation.

Novel Mixed Matrix Sodium Alginate-Fullerenol Membranes: Development, Characterization, and Study in Pervaporation Dehydration of Isopropanol

Novel mixed matrix dense and supported membranes based on biopolymer sodium alginate (SA) modified by fullerenol were developed. Two kinds of SA–fullerenol membranes were investigated: untreated and cross-linked by immersing the dry membranes in 1.25 wt % calcium chloride (CaCl₂) in water for 10 min. The structural and physicochemical characteristics features of the SA–fullerenol composite were investigated by Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopic methods, scanning electron (SEM) and atomic force (AFM) microscopies, thermogravimetric analysis (TGA), and swelling experiments. Transport properties were evaluated in pervaporation dehydration of isopropanol in a wide concentration range. It was found that the developed supported cross-linked SA-5/PAN^CaCl2 membrane (modified by 5 wt % fullerenol) possessed the best transport properties (the highest permeation fluxes 0.64–2.9 kg/(m² h) and separation factors 26–73,326) for the pervaporation separation of the water–isopropanol mixture in the wide concentration range (12–90 wt % water) at 22 °C and is suitable for the promising application in industry.

New Trends in Biopolymer-Based Membranes for Pervaporation

Biopolymers are currently the most convenient alternative for replacing chemically synthetized polymers in membrane preparation. To date, several biopolymers have been proposed for such purpose, including the ones derived from animal (e.g., polybutylene succinate, polylactic acid, polyhydroxyalcanoates), vegetable sources (e.g., starch, cellulose-based polymers, alginate, polyisoprene), bacterial fermentation products (e.g., collagen, chitin, chitosan) and specific production processes (e.g., sericin). Particularly, these biopolymer-based membranes have been implemented into pervaporation (PV) technology, which assists in the selective separation of azeotropic water-organic, organic-water, organic-organic mixtures, and specific separations of chemical reactions. Thereby, the aim of the present review is to present the current state-of-the-art regarding the different concepts on preparing membranes for PV. Particular attention is paid to the most relevant insights in the field, highlighting the followed strategies by authors for such successful approaches. Finally, by reviewing the ongoing development works, the concluding remarks and future trends are addressed.