Ultrafast formation of pyrogallol/polyethyleneimine nanofilms for aqueous and organic nanofiltration

Preparation of a CPVC composite loose nanofiltration membrane based on plant polyphenols for effective dye wastewater treatment

The textile industry's high-salinity wastewater presents a significant difficulty for fractioning salts and dyes. To fractionate the dyes and salts, a high-performance CPVC composite loose nanofiltration membrane (LNM) was fabricated by interfacial polymerization. The organic phase was obtained by crosslinking polyethylenimine (PEI) with tannic acid (TA) and gallic acid (GA) using TMC. The resultant composite LNM performance was enhanced by adjusting the coating parameters, which included TA and GA concentrations as well as coating time. The study examined the effects of the total content of TA/PEI and GA/PEI concentrations on the chemical structure, surface roughness, and microstructure of the selective layer of LNM using SEM, AFM, FTIR, and water contact angle measurements. It also investigated the filtration performance of the membrane's selective layer, including pure water flux, PEG800 rejection rate, and membrane fouling analysis. However, the resultant membrane treated simulated reactive black 5 (RB5) dye wastewater. When the total content of TA/PEI is 4 kg L-1, the permeability of pure water flux is high at 7.5 L per m2 per h per bar when the total content of GA/PEI is 14 kg L-1 and the pure water flux is high at 8.8 L per m2 per h per bar. The overall PEG800 rejection rates were 97-98.98%. The optimal TA : PEI ratios reached a good pure water permeability up to 6.4 L per (m2 per h per bar) with a high rejection rate of 99.69% for a ratio 1/3 to dye, and GA : PEI ratios reached a good water permeability at 5.5 and 6.5 L per (m2 per h per bar) with rejection rates of 99.21% and 98.88% for ratio 1/3 and 3.5/10.5 for simulated RB5 dye, and the NaCl retention rate gradually decreased from 4% to 3%. The resultant LNM demonstrated promising applications in dye and salt fractionation.

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Homogeneous silver nanoparticle loaded polydopamine/polyethyleneimine-coated bacterial cellulose nanofibers for wound dressing

Utilizing mussel-inspired chemistry is an advanced strategy for surface modification, because dopamine (DA) can form a material-independent adhesive coating and further functionalization can be achieved, including the production of silver nanoparticles (AgNPs). Nevertheless, DA easily aggregates in the nanofiber network structure of bacterial cellulose (BC), which not only blocks the pores in the BC structure but also leads to the formation of large silver particles and the burst release of highly cytotoxic silver ions. Herein, a homogeneous AgNP-loaded polydopamine (PDA)/polyethyleneimine (PEI) coated BC was constructed via a Michael reaction between PDA and PEI. Under the action of PEI, the PDA/PEI coating was uniformly attached to the BC fiber surface with a thickness of approximately 4 nm, and homogeneous AgNPs were produced on the uniform PDA/PEI/BC (PPBC) fiber surface. The sustained release of silver ions was better from AgNPs@PPBC than from AgNPs@PDA/BC. The obtained AgNPs@PPBC exhibited excellent antibacterial activities and cytocompatibility. The results of the in vivo assay indicated that the AgNPs@PPBC dressing could inhibit S. aureus infection and inflammation, promote hair follicle growth, enhance collagen deposition, and accelerate wound healing within 12 days compared with BC. These results illustrate that the homogeneous AgNPs@PPBC dressing has great potential for treating infected wounds.

Plant Polyphenol Pyrogallol and Polyamine-Based Co-Deposition for High-Efficiency Nanofiltration Membrane Preparation towards Inorganic Salt Removal

The co-deposition between polyphenols and amines has been demonstrated in order to prepare positively charged nanofiltration (NF) membranes for multivalent cation rejection in recent years; however, the low reactivities of the involved polyphenols usually cause a long co-deposition time and unsatisfactory rejection. Herein, a novel plant polyphenol (PG) was co-deposited with tetraethylenepentamine (TEPA) in a much shorter time period to prepare positively charged NF with high multivalent cation rejection membranes. The performance of the co-deposition membranes can be easily controlled by adjusting the mass ratio of PG and TEPA, reaction time, and pH value of the buffer solution. The optimal membrane, prepared under a polyphenol and polyamine mass ratio of 1:1, coating time of 2 h, and pH value of 8.0, shows a decent pure water permeability of 8.43 L m^-2 h^-1 bar^-1 while maintaining a superior 96.24% MgCl₂ rejection. More importantly, the universality of this method was corroborated by employing other amines with different molecular weights in the co-deposition. This work provides new insights for the preparation of high-performance positively charged NF membranes.

Metal-Polyphenol Coordination at the Aqueous Contra-diffusion "Interface": A Green Way to High-Performance Iron(III)/Tannic Acid Thin-Film-Composite Nanofiltration Membranes

Thin-film-composite (TFC) nanofiltration membranes have found wide uses in environment remediation and industrial separation. There is a growing trend to avoid the use of organic solvents and toxic chemicals during membrane fabrication. Therefore, the aqueous fabrication of TFC membranes receives considerable interest as a green and sustainable process. However, it remains challenging to construct a defect-free and ultrathin film in a homogeneous aqueous phase without the assistance of an interface. The contra-diffusion process provides a special "interface" to confine the film formation within a narrow space by regulating the competition between precursor diffusion and interfacial reactions. Herein, Fe³⁺/tannic acid (TA) TFC membranes were fabricated by a contra-diffusion process. The effects of fabrication parameters on the Fe³⁺/TA TFC membrane microstructure and performance were also investigated. The negatively charged membrane performs a competitive Na₂SO₄ rejection of 95.6% with a permeation flux of 44.3 L m^-2 h^-1 under 0.6 MPa as well as more than 99.5% rejection to several anionic dyes. The as-prepared membranes perform superior nanofiltration performance compared to other reported Fe³⁺/TA-based membranes, owing to the thin and defect-free selective layers by self-regulation. Moreover, the membranes exhibit stable rejection during a long-term nanofiltration test.

Fabrication of Polysulfobetaine Gradient Coating via Oxidation Polymerization of Pyrogallol To Modulate Biointerfaces

A surface with a gradient physical or chemical feature, such as roughness, hardness, wettability, and chemistry, serves as a powerful platform for high-throughput investigation of cell responses to a biointerface. In this work, we developed a continuous antifouling gradient surface using pyrogallol (PG) chemistry. A copolymer of a zwitterionic monomer, sulfobetaine methacrylate, and an amino monomer, aminoethyl methacrylate, were synthesized (pSBAE) and deposited on glass slides via the deposition of self-polymerized PG. A gradient of pSBAE was fabricated on glass slides in 7 min in the presence of an oxidant, ammonium persulfate, by withdrawing the reaction solution. The modified glass slide showed a wettability gradient, determined by measuring the water contact angle. Cell adhesion and protein adsorption were well correlated with surface wettability. We expect that this simple and faster method for the fabrication of a continuous chemical gradient is applicable for high-throughput screening of surface properties to modulate biointerfaces.

Tailored design of nanofiltration membranes for water treatment based on synthesis-property-performance relationships

Tailored design of high-performance nanofiltration (NF) membranes is desirable because the requirements for membrane performance, particularly ion/salt rejection and selectivity, differ among the various applications of NF technology ranging from drinking water production to resource mining. However, this customization greatly relies on a comprehensive understanding of the influence of membrane fabrication methods and conditions on membrane properties and the relationships between the membrane structural and physicochemical properties and membrane performance. Since the inception of NF, much progress has been made in forming the foundation of tailored design of NF membranes and the underlying governing principles. This progress includes theories regarding NF mass transfer and solute rejection, further exploitation of the classical interfacial polymerization technique, and development of novel materials and membrane fabrication methods. In this critical review, we first summarize the progress made in controllable design of NF membrane properties in recent years from the perspective of optimizing interfacial polymerization techniques and adopting new manufacturing processes and materials. We then discuss the property-performance relationships based on solvent/solute mass transfer theories and mathematical models, and draw conclusions on membrane structural and physicochemical parameter regulation by modifying the fabrication process to improve membrane separation performance. Next, existing and potential applications of these NF membranes in water treatment processes are systematically discussed according to the different separation requirements. Finally, we point out the prospects and challenges of tailored design of NF membranes for water treatment applications. This review bridges the long-existing gaps between the pressing demand for suitable NF membranes from the industrial community and the surge of publications by the scientific community in recent years.

Robust and Large-Area Calix[4]pyrrole-Based Nanofilms Enabled by Air/DMSO Interfacial Self-Assembly-Confined Synthesis

The modular construction of defect-free nanofilms with a large area remains a challenge. Herein, we present a scalable strategy for the preparation of calix[4]pyrrole (C[4]P)-based nanofilms through acryl hydrazone reaction conducted in a tetrahydrazide calix[4]pyrrole (CPTH)-based self-assembled layer at the air/DMSO interface. With this strategy, robust, regenerable, and defect-free nanofilms with an exceptionally large area (∼750 cm²) were constructed. The thickness and permeability of the film systems can be fine-tuned by varying the precursor concentration or by changing another building block. A typical nanofilm (C[4]P-TFB, ∼67 nm) depicted high water flux (39.9 L m^-2 h^-1 under 1 M Na₂SO₄), narrow molecular weight cut-off value (∼200 Da), and promising antifouling properties in the forward osmosis (FO) process. In addition, the nanofilms are stable over a wide pH range and tolerable to different organic solvents. Interestingly, the introduction of C[4]P endowed the nanofilms with both outstanding mechanical properties and unique group-selective separation capability, laying the foundation for wastewater treatment and pharmaceutical concentration.

Lysozyme Membranes Promoted by Hydrophobic Substrates for Ultrafast and Precise Organic Solvent Nanofiltration

Organic solvent nanofiltration (OSN) is regarded as a promising separation technology in chemical and pharmaceutical industries. However, it remains a great challenge in fabricating OSN membranes with high permeability and precise selectivity by simple, transfer-free, and up-scalable processes. Herein, we report lysozyme nanofilm composite membranes (LNCM) prepared by one-step methods with hydrophobic substrates at the air/water interface. The microporous substrates not only promote the heterogeneous nucleation of amyloid-like lysozyme oligomers to construct small pores in the formed nanofilms but also benefit for the simultaneous composition of LNCM via hydrophobic interactions. The constructed nanopores are reduced to around 1.0 nm, and they are demonstrated by grazing incidence small-angle X-ray scattering with a closely packed model. The LNCM can tolerate most organic polar solvents and the permeability surpasses most of state-of-the-art OSN membranes.

H2O2-Triggered Rapid Deposition of Poly(caffeic acid) Coatings: A Mechanism-Based Entry to Versatile and High-Efficient Molecular Separation

Plant-derived polyphenol coating offers a promising route to fabricate functional surfaces for different substrate materials. However, almost all of the deposition approaches are time-consuming and involve inefficient processes, and the mechanisms behind the coating deposition are rarely understood. Herein, we report a rational methodology to achieve the rapid deposition of poly(caffeic acid) (PCA) by using H₂O₂ as a trigger under the assistance of copper sulfate (CuSO₄). The comparative monomer structure of PCA oxidation polymerization has illustrated a significant distinction in the reaction path for PCA coating deposition which has never been reported before. Until now, the unprecedented fast velocity for polyphenol coating has been obtained, and the PCA coating exhibits excellent homogeneity, spatiotemporal tunability, and firm stability. Moreover, three different types of filtration membranes, poly(vinylidene fluoride) microfiltration membrane (PVDF MF membrane), poly(ether sulfone) (PES) ultrafiltration (UF) hollow fiber membrane, and PCA-coated PES nanofiltration (NF) membrane, are all successfully dip-coated using H₂O₂-triggered PCA coating. Without synthetic complexities and intricate procedures, the formation of hydrophilic and homogeneous PCA aggregates on the surface and/or inside pore walls resulted in various membranes. The as-prepared PCA-coated PVDF MF membrane demonstrates excellent oil/water separation efficiency of less than 150 ppm and a flux recovery rate of approximately 90% even after five cycles. By one-step co-deposition of PCA and poly(2-ethyl-2-oxazoline) (PEtOx) on the PES UF membrane surface, hydrophilicity and biofouling resistance are implemented for efficient protein filtration. The PES NF membrane formed by the PCA layer exhibits high mono-/divalent ion selectivity and excellent chlorine resistance. Overall, these results represent a rapid and sustainable approach to tailor PCA coatings for versatile liquid separation processes.