Low-temperature heat utilization with vapor pressure-driven osmosis: Impact of membrane properties on mass and heat transfer

Enhancing Thermo-Osmotic Low-Grade Heat Recovery by Applying a Negative Pressure to the Feed

A newly developed technology, thermo-osmotic energy conversion (TOEC), is supposed to convert low-grade heat into power. However, the performance of existing TOEC experiments is deficient. This paper discusses the feasibility of strengthening TOEC by applying negative pressure to the feed liquid, which can reduce air pressure in the membrane pores and molecular diffusion resistance. Theoretical calculation shows that when the cooling and heating temperatures are 40 and 80 °C, respectively, and the transmembrane pressure difference is 5.0 MPa, the TOEC system with a negative pressure of 0.5 bar at the feed side can approach an efficiency of 3.01% and a power density of 16.85 W m-2, which increases by 20% and 27% compared with no negative pressure, respectively. Given the nonuniformity in the real system, computational fluid dynamics simulation is used to obtain the correction factor, which is then used to revise the theory prediction results for the first time. Moreover, a lab-scale experiment also proves that a negative pressure at the feed benefits the performance of the TOEC device. Overall, this research presents a feasible method to enhance a TOEC system, which may promote the development of a more-efficiently TOEC system for low-grade heat utilization.

Stack Thermo-Osmotic System for Low-Grade Thermal Energy Conversion

Thermo-osmotic energy conversion (TOEC) technology, developed from membrane distillation, is an emerging method that has the potential of obtaining electricity efficiently from a low-grade heat source but faces the difficult problem of pump power loss. In this study, we build a novel TOEC system with a multistage architecture that can work without pump assistance. The experiment system, made of cheap commercial materials, can obtain a power density of 1.39 ± 0.25 W/m², with a heating temperature of 80 °C, and its efficiency increased linearly with the total stage number. A theory calculation shows that a 30-stage system with a specific membrane and a working pressure of 5.0 MPa can obtain an efficiency of 2.72% with a power density of 14.0 W/m². By a molecular dynamics simulation, it is shown that a high-performance membrane has the potential to work at 40 MPa. This study proves that TOEC technology is a practical and competitive approach to covert low-grade thermal energy into power efficiently.

Nano Heat Pump Based on Reverse Thermo-osmosis Effect

Heat pumps are widely used in domestic applications, agriculture, and industry. Here, we report a novel heat pump based on the reverse thermo-osmosis (RTO) effect in a nanoporous graphene (NPG) membrane. Through classical molecular dynamics (MD) simulation, we prove that the heat pump can transport mass and heat efficiently. The heat and mass fluxes are increased linearly with the hydraulic pressure provided. Ultrahigh heat fluxes of 6.2 ± 1.0 kW/cm² and coefficient of performance (COP) of 20.2 are obtained with a temperature increment of 5 K and a working pressure of 80 MPa. It is interesting that water molecules on the NPG membrane can evaporate in a cluster state, and the cluster evaporations reduce the vaporization enthalpy of the processes.