Facile preparation of antiadhesive and biocidal reverse osmosis membranes using a single coating for efficient water purification

Fouling in reverse osmosis membranes: monitoring, characterization, mitigation strategies and future directions

Water scarcity has been a global challenge for many countries over the past decades, and as a result, reverse osmosis (RO) has emerged as a promising and cost-effective tool for water desalination and wastewater remediation. Currently, RO accounts for >65% of the worldwide desalination capacity; however, membrane fouling is a major issue in RO processes. Fouling reduces the membrane's lifespan and permeability, while also increases the operating pressure and chemical cleaning frequency. Overall, fouling reduces the quality and quantity of desalinated water, and thus hinders the sustainable application of RO membranes by disturbing its efficacy and economic aspects. Fouling arises from various physicochemical interactions between water pollutants and membrane materials leading to foulants' accumulation onto the membrane surfaces and/or inside the membrane pores. The current review illustrates the main types of particulates, organic, inorganic and biological foulants, along with the major factors affecting its formation and development. Moreover, the currently used monitoring methods, characterization techniques and the potential mitigation strategies of membrane fouling are reviewed. Further, the still-faced challenges and the future research on RO membrane fouling are addressed.

Robust In Situ Fouling Control toward Thin-Film Composite Reverse Osmosis Membrane via One-Step Deposition of a Ternary Homogeneous Metal-Organic Hybrid Layer

Membrane fouling is one of the persistent headaches for water desalination because of the significant detriment to membrane performance and operating cost control. It is a great challenge to overcome such crisis in a facile and robust manner. This work was dedicated to customizing an antifouling thin-film composite (TFC) reverse osmosis (RO) membrane with a polydopamine (PDA)/β-alanine (βAla)/Cu²⁺ ternary homogeneous metal-organic hybrid coating. The metal ions were evenly distributed in a continuous organic network via polydentate coordination. The incorporation of βAla enabled a substantial promotion of the Cu²⁺ loading capacity on the membrane surface. The involved one-step codeposition protocol made the surface engineering practically accessible. The deposition time was optimized to afford an uncompromising permselectivity of the membrane. This novel trinity was a smart blend of anti-adhesive and bactericidal factors, and each component in the all-in-one layer performed its own function. The hydrophilic PDA/βAla phase induced weak deposition propensity of organic foulant and bacteria onto the modified membrane, as elucidated by water flux variation, foulants adhesion profile, and interfacial interaction energy. Meanwhile, the Cu²⁺-loaded surface strongly inactivated the attached bacteria to further alleviate biofouling. Excellent sustainability and stability implied the reliable performance of such trinity-coated membrane in practical service. Given the simplicity and robustness, this work opened a promising avenue for in situ fouling control of TFC RO membranes during water desalination.

Separation, anti-fouling, and chlorine resistance of the polyamide reverse osmosis membrane: From mechanisms to mitigation strategies

Membrane technology has been widely used in the wastewater treatment and seawater desalination. In recent years, the reverse osmosis (RO) membrane represented by polyamide (PA) has made great progress because of its excellent properties. However, the conventional PA RO membranes still have some scientific problems, such as membrane fouling, easy degradation after chlorination, and unclear mechanisms of salt retention and water flux, which seriously impede the widespread use of RO membrane technology. This paper reviews the progress in the research and development of the RO membrane, with key focus on the mechanisms and strategies of the contemporary separation, anti-fouling and chlorine resistance of the PA RO membrane. This review seeks to provide state-of-the-art insights into the mitigation strategies and basic mechanisms for some of the key challenges. Under the guidance of the fundamental understanding of each mechanism, operation and modification strategies are discussed, and reasonable analysis is carried out, which can address some key technical challenges. The last section of the review focuses on the technical issues, challenges, and future perspective of these mechanisms and strategies. Advances in synergistic mechanisms and strategies of the PA RO membranes have been rarely reviewed; thus, this review can serve as a guide for new entrants to the field of membrane water treatment and established researchers.

Fouling control in reverse osmosis for water desalination & reuse: Current practices & emerging environment-friendly technologies

Reverse Osmosis (RO) is becoming increasingly popular for seawater desalination and wastewater reclamation. However, fouling of the membranes adversely impacts the overall process efficiency and economics. To date, several strategies and approaches have been used in RO plants and investigated at the laboratory-scale for their effectiveness in the control of different fouling types. Amid growing concerns and stringent regulations for the conservation of environment, there is an increasing trend to identify technologies that are effective in fouling mitigation as well as friendly to the environment. The present review elaborates on the different types of environment-friendly technologies for membrane fouling control that are currently being used or under investigation. It commences with a brief introduction to the global water crisis and the potential of membrane-based processes in overcoming this problem. This is followed by a section on membrane fouling that briefly describes the major fouling types and their impact on the membrane performance. Section 3 discusses the predominant fouling control/prevention strategies including feedwater pretreatment, membrane and spacer surface modification and membrane cleaning. The currently employed techniques are discussed together with their drawbacks, with some light being shed on the emerging technologies that have the ability to overcome the current limitations. The penultimate section provides a detailed discussion on a variety of eco-friendly/chemical free techniques investigated to control different fouling types. These include both control and prevention strategies, for example, bioflocculation and electromagnetic fields, as well as remediation techniques such as osmotic backwashing and gas purging. In addition, quorum sensing has been specifically discussed for biofouling remediation. The promising findings from different studies are presented followed by a discussion on their drawbacks and limitations. The review concludes with a need for carrying out fundamental studies to develop better understanding of the eco-friendly processes discussed in the penultimate section and their optimization for possible integration into the RO plants.

Synthesis and characterization of tannic acid pillared bentonite composite for the efficient adsorption of aflatoxins

Tannic acid (TA) is a hydrolysable polyphenol with established antioxidant and antibacterial activity along with its tendency to bind both organic and inorganic ions/molecules. In the present study, the sequestration performance of TA pillared bentonite for various aflatoxins (AFs) including AFB1, AFB2, AFG1 and AFG2 from aqueous solutions and simulated poultry gastrointestinal model solution was studied via adsorption. The adsorbents were characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), N₂ adsorption-desorption study and X-ray photoelectron spectroscopy (XPS). The reaction conditions including pH, agitation time, initial toxin concentration and temperature were systematically optimized. The Langmuir adsorption capacity of the adsorbent reached to 86, 71, 74 and 149 mg/g for AFB1, AFB2, AFG1 and AFG2 respectively. Adsorption kinetics and thermodynamic studies showed rapid AFs uptake and the exothermicity of the adsorption reaction respectively. Simultaneous removal of AFs by BTA3 revealed their independent and uninterrupted adsorption and the adsorption mechanism of AFs over BTA3 was elaborated with the help of XPS results. The outstanding AFs sequestering capability of BTA3 in aqueous solution and simulated poultry gastrointestinal model can be envisioned of great promise for the remediation of AFs and other hazardous pollutants from food and poultry industrial products.

Proanthocyanin-Capped Biogenic TiO2 Nanoparticles with Enhanced Penetration, Antibacterial and ROS Mediated Inhibition of Bacteria Proliferation and Biofilm Formation: A Comparative Approach

Biofunctionalized TiO₂ nanoparticles with a size range of 18.42±1.3 nm were synthesized in a single-step approach employing Grape seed extract (GSE) proanthocyanin (PAC) polyphenols. The effect of PACs rich GSE corona was examined with respect to 1) the stability and dispersity of as-synthesized GSE-TiO₂ -NPs, 2) their antiproliferative and antibiofilm efficacy, and 3) their propensity for internalization and reactive oxygen species (ROS) generation in urinary tract infections (UTIs) causing Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus saprophyticus strains. State-of-the-art techniques were used to validate GSE-TiO₂ -NPs formation. Comparative Fourier transformed infrared (FTIR) spectral analysis demonstrated that PACs linked functional -OH groups likely play a central role in Ti⁴⁺ reduction and nucleation to GSE-TiO₂ -NPs, while forming a thin, soft corona around nascent NPs to attribute significantly enhanced stability and dispersity. Transmission electron microscopic (TEM) and inductively coupled plasma mass-spectroscopy (ICP-MS) analyses confirmed there was significantly (p<0.05) enhanced intracellular uptake of GSE-TiO₂ -NPs in both Gram-negative and -positive test uropathogens as compared to bare TiO₂ -NPs. Correspondingly, compared to bare NPs, GSE-TiO₂ -NPs induced intracellular ROS formation that corresponded well with dose-dependent inhibitory patterns of cell proliferation and biofilm formation in both the tested strains. Overall, this study demonstrates that -OH rich PACs of GSE corona on biogenic TiO₂ -NPs maximized the functional stability, dispersity and propensity of penetration into planktonic cells and biofilm matrices. Such unique merits warrant the use of GSE-TiO₂ -NPs as a novel, functionally stable and efficient antibacterial nano-formulation to combat the menace of UTIs in clinical settings.

Cytotoxic aquatic pollutants and their removal by nanocomposite-based sorbents

Water is an extremely essential compound for human life and, hence, accessing drinking water is very important all over the world. Nowadays, due to the urbanization and industrialization, several noxious pollutants are discharged into water. Water pollution by various cytotoxic contaminants, e.g. heavy metal ions, drugs, pesticides, dyes, residues a drastic public health issue for human beings; hence, this topic has been receiving much attention for the specific approaches and technologies to remove hazardous contaminants from water and wastewater. In the current review, the cytotoxicity of different sorts of aquatic pollutants for mammalian is presented. In addition, we will overview the recent advances in various nanocomposite-based adsorbents and different approaches of pollutants removal from water/wastewater with several examples to provide a backdrop for future research.

Microfiltration Membranes Modified with Silver Oxide by Plasma Treatment

Microfiltration (MF) membranes have been widely used for the separation and concentration of various components in food processing, biotechnology and wastewater treatment. The deposition of components from the feed solution and accumulation of bacteria on the surface and in the membrane matrix greatly reduce the effectiveness of MF. This is due to a decrease in the separation efficiency of the membrane, which contributes to a significant increase in operating costs and the cost of exploitative parts. In recent years, significant interest has arisen in the field of membrane modifications to make their surfaces resistant to the deposition of components from the feed solution and the accumulation of bacteria. The aim of this work was to develop appropriate process parameters for the plasma surface deposition of silver oxide (AgO) on MF polyamide membranes, which enables the fabrication of filtration materials with high permeability and antibacterial properties.

Evaluation of bioactivities of zinc oxide, cadmium sulfide and cadmium sulfide loaded zinc oxide nanostructured materials prepared by nanosecond pulsed laser

The present study reports the preparation of cadmium sulfide (CdS) loaded zinc oxide (ZnO) nanostructured semiconductor material and its anti-bioactivity studies against cancerous and fungus cells. For composite preparation, two different mass ratios of CdS (10 and 20%) were loaded on ZnO (10%CdS/ZnO, 20%CdS/ZnO) using a 532 nm pulsed laser ablation in water media. The structural and morphological analyses confirmed the successful loading of nanoscaled CdS on the surface of ZnO particles, ZnO particles were largely spherical with average size ~50 nm, while CdS about 12 nm in size. The elemental and electron diffraction analyses reveal that the prepared composite, CdS/ZnO contained both CdS and ZnO, thus reaffirming the production of CdS loaded ZnO. The microscopic examination and MTT assay showed the significant impact of ZnO, CdS, and CdS loaded ZnO on human colorectal carcinoma cells (HCT-116 cells). Our results show that the prepared ZnO had better anticancer activities than individual CdS, and CdS loaded ZnO against cancerous cells. For antifungal efficacy, as-prepared nanomaterials were investigated against Candida albicans by examining minimum inhibitory/fungicidal concentration (MIC/MFC) and morphogenesis. The lowest MIC (0.5 mg/mL), and MFC values (1 mg/mL) were found for 10 and 20%CdS/ZnO. Furthermore, the morphological analyses reveal the severe damage of the cell membrane upon exposure of Candida strains to nanomaterials. The present study suggests that ZnO, CdS, and CdS loaded ZnO nanostructured materials possess potential anti-cancer and anti-fungal activities.