A submerged membrane bioreactor under unprecedentedly short hydraulic retention time enabled by non-woven fabric pre-filtration and electrochemical membrane cleaning

Mechanisms and Strategies of Advanced Oxidation Processes for Membrane Fouling Control in MBRs: Membrane-Foulant Removal versus Mixed-Liquor Improvement

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

Control strategies for biofilm control in reclaimed water distribution systems from the perspective of microbial antagonism and electrochemistry

Biofilm formation in reclaimed water (RW) distribution systems presents significant technical challenges to RW utilization. Two main technologies to control biofilm formation, microbial antagonism (MA) and electrochemical oxidation (EO), are not yet widely used in drip irrigation systems (DIS) and their mechanisms of action need further clarification. In this study, we first showed that the MA and EO treatments reduced biofilm formation by about 62% and 68%, respectively, and extracellular polymeric substance (EPS) content by 14% and 49%, respectively, in biofilms compared with raw RW type 1 (R-RW1) in unused pipes, thus effectively improving the performance of DIS. When MA-RW and EO-RW were applied to already clogged systems, the degree of clogging alleviation varied depending on the severity of the original clogging. We recommend adding the antagonist, Bacillus subtilis, to RW at 25% clogging for the maximum effect and to slow the microbial adaptation process. Compared to MA, the recovery effect of EO was slower initially but lasted longer and had a significantly better alleviating effect on severely clogged pipelines. Illumina Mi-SEQ high-throughput sequencing data showed that both MA and EO resulted in a significant decrease in microbial diversity, dynamic changes in bacterial community structure, and disruption of network interaction and network modularity. Meanwhile, both treatments promoted the growth of specific microorganisms, enhanced the interaction between certain microbial components, and improved the efficiency of information, matter, and energy exchange within the modules. In summary, we verified the dredging effect of two strategies on DIS under different water conditions, revealed the differences in their mechanisms of action, and proposed their application scenarios. Our results will help improve the efficiency of RW in agricultural drip irrigation systems and effectively reduce maintenance costs.

A Novel Anaerobic Gravity-Driven Dynamic Membrane Bioreactor (AnGDMBR): Performance and Fouling Characterization

Despite numerous studies undertaken to define the development and significance of the dynamic membrane (DM) formed on some coarse materials, the optimization of reactor configuration and the control of the membrane fouling of anaerobic dynamic membrane bioreactor (AnDMBR) need to be further investigated. The aim of this study was to design a novel anaerobic gravity-driven dynamic membrane bioreactor (AnGDMBR) for the effective and low-cost treatment of municipal wastewater. An 800 mesh nylon net was determined as the optimal support material based on its less irreversible fouling and higher effluent quality by the dead-end filtration experiments. During the continuous operation period of 44 days, the reactor performance, DM filtration behavior and microbial characteristics were studied and compared with the results of recent studies. AnGDMBR had a higher removal rate of chemical oxygen demand (COD) of 85.45 ± 7.06%. Photometric analysis integrating with three-dimensional excitation–emission matrix fluorescence spectra showed that the DM effectively intercepted organics (46.34 ± 16.50%, 75.24 ± 17.35%, and 66.39 ± 17.66% for COD, polysaccharides, and proteins). The addition of suspended carriers effectively removed the DM layer by mechanical scouring, and the growth rate of transmembrane pressure (TMP) and the decreasing rate of flux were reduced from 18.7 to 4.7 Pa/h and 0.07 to 0.01 L/(m²·h²), respectively. However, a dense and thin morphological structure of the DM layer was still observed in the end of reactor operation and plenty of filamentous microorganisms (i.e., SJA-15 and Anaerolineaceae) and the acidogens (i.e., Aeromonadaceae) predominated in the DM layer, which was also embedded in the membrane pore and led to severe irreversible fouling. In summary, the novel AnGDMBR has a superior performance (higher organic removal and lower fouling rates), which provides useful information on the configuration and operation of AnDMBRs for municipal wastewater treatment.

Electrochemical biofilm control by reconstructing microbial community in agricultural water distribution systems

Biofilm causes considerable technical challenges in agricultural water distribution systems. Electrochemical treatment (ECT) is a potential technique for controlling biofilm in the systems. Given the limited information on how ECT performance changes of irrigation systems and microbial biofilm community shifts. In this study, the effect of anti-biofilm was assessed. Illumina Miseq high-throughput sequencing, combined with molecular ecological network analysis, were applied to detect the effects of ECT on attached biofilm microbial communities. We found that ECT effectively mitigated biofilm formation with the fixed-biofilm biomass reduced by 37.5 %-79.9 %. ECT significantly shifted the bacterial community structures in the biofilm, reduced the communities' diversity, and changed the dominant species. Molecular ecological network analysis showed that the complexity and size of bacterial networks were destabilized under ECT and decreased the interactions among bacterial species. The reconstruction in bacterial community and networks were responsible for the decline in extracellular polymer substances and biofilm biomass. However, chlorine-resistant bacteria were found increased after ECT, and higher relative abundance and low biofilm removal was identified in continuous ECT as compared with intermittent ECT. These results aimed to highlight the opportunity for biofouling mitigation by ECT for irrigation systems, and reveal the potential anti-biofilm microbial mechanisms of ECT.

In-situ membrane fouling control by electrooxidation and microbial community in membrane electro-bioreactor treating aquaculture seawater

Ammonia and nitrite in aquaculture recirculating seawater need to be strictly controlled to avoid deleterious effects on aquatic organisms. However, traditional biological approach can hardly meet the standard due to the short hydraulic retention time (HRT) and nitrite accumulation. A Membrane Electro-Bioreactor (MEBR) was developed for ammonia removal enhancement and in-situ electrochemical membrane fouling mitigation. The fouling mechanism was first found to proceed via the standard filtration model. The flux decrease was mainly caused by an internal pore clogging phenomenon. Membrane fouling resistance was enhanced by increasing anode potential from 0 to 1.4 V vs. SCE (Saturated Calomel Electrode). The ammonia removal rate in the MEBR was above 95% (HRT: 2 h, after day-13) and membrane fouling was mitigated that operation duration was extended by 71.4%. Higher total proportion of Proteobacteria, Bacteroidetes, Planctomycetes and Actinobacteria was obtained in the MEBR, suggesting higher nitrification and nitrogen removal potentials.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.