A comprehensive investigation on the components in ionic liquid-based polymer inclusion membrane for Cr(VI) transport during electrodialysis

NaH2PO4 synergizes with organic matter to stabilize chromium in tannery sludge

Heavy metal stabilization is an effective method to treat chromium in tannery sludge. Here we show that mainly investigated NaH2PO4 (MSP) and organic matter (OM) to stabilize chromium in tannery sludge. The experimental investigation revealed that the addition of montmorillonite (MMT) and MSP samples showed a significant increase in the percentage of reducible and oxidizable Cr in the former compared to the samples with the addition of MMT. This is attributed to the formation of Cr-O bond, which allows the MSP to undergo an inner-sphere complexation reaction with the metal oxide of Cr via ligand exchange. Significantly, the MSP moiety adsorbs on the surface of OM through monodentate, which increases the adsorption sites of OM for Cr6+ and promotes the reduction of Cr6+ to Cr3+. Moreover, PO43- reacts with Cr3+ to produce CrPO4 precipitation, thus reducing the free Cr3+ content. Finally, DFT calculations confirmed that a ternary system is formed between PO43-, OM, and Cr, and the binding energy is negative, which indicated that PO43- could co-stabilize Cr with OM.

Efficient, fast, simple, and eco-friendly methods for separation of toxic chromium(VI) ions based on ion exchangers and polymer materials impregnated with Cyphos IL 101, Cyphos IL 104, or D2EHPA

In this study, we present the results of the first comparison of the elimination of toxic Cr(VI) ions, which are hazardous contamination of the environment, from aqueous solutions using ion exchangers (IEs) and polymer materials (PMs) impregnated with D2EHPA or ionic liquids (Cyphos IL 101 and Cyphos IL 104). Sorption of Cr(VI) ions and desorption from the formulated sorption materials were carried out. In comparison, classical solvent extraction was accomplished. Fourier transform infrared-attenuated total reflectance spectroscopy (FTIR-ATR), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and atomic force microscopy (AFM) have been used for characterization of the structure of developed IEs and PMs. The highest efficiency of adsorption of Cr(VI) ions was obtained using PMs with ionic liquids (>82%). Desorption from these materials were also very efficient (>75%). On the contrary, the application of IEs allowed for obtaining the best results of both, sorption and desorption processes when using D2EHPA (75% and 72%, respectively). The application of PMs and IEs is part of the green chemistry, and the conducted elimination of chromium(VI) ions using developed materials allows for the conclusion that they can potentially be used on a larger scale, e.g., for the treatment of industrial wastewater rich in Cr(VI) ions.

Mechanistic investigation of intensified separation of molybdenum(VI) and vanadium(V) using polymer inclusion membrane electrodialysis

The main challenge in separating molybdenum(VI) and vanadium(V) which have similar properties results in great difficulties in the green recycling of hazardous spent catalysts. Here, selective facilitating transport and stripping are integrated into the polymer inclusion membrane electrodialysis process (PIMED) to separate Mo(VI) and V(V) to overcome the complicated co-extraction and stepwise-stripping in conventional solvent extraction. The influences of various parameters, the selective transport mechanism, and respective activation parameters were systematically investigated. Results revealed that the affinity of the Aliquat 36 as the carrier and PVDF-HFP as the base polymer of PIM towards Mo(VI) is stronger than that of V(V), while the strong interaction between Mo(VI) and carrier caused low migration through the membrane. By the combination of adjusting and controlling the electric density and strip acidity, the interaction was destroyed and the transport was facilitated. After optimization, stripping efficiencies of Mo(VI) and V (V) increased from 44.4% to 93.1% and reduced from 31.9% to 1.8%, respectively, while their separation coefficient increased 16.3 times to 333.4. The activation energy, enthalpy and entropy for the transport of Mo(VI) were determined to be 4.846 kJ mol^-1, 6.745 kJ mol^-1 and - 310.838 J mol^-1 K^-1, respectively. The present work demonstrates that the separation of similar metal ions could be improved by fine tuning the affinity and interaction between metal ions and the PIM, thus providing new insights into the recycling of similar metal ions from secondary resources.

Acid-treated pomegranate peel; An efficient biosorbent for the excision of hexavalent chromium from wastewater

We studied the sequestration of hexavalent chromium Cr(VI) from an aqueous solution using chemically modified pomegranate peel (CPP) as an efficient bio-adsorbent. The synthesized material was characterized by X-ray diffraction spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM). The impacts of parameters like solution pH, Cr(VI) concentration, contact time, and adsorbent dosage were investigated. Experimental results of the isotherm studies and adsorption kinetics were found agreeing to the Langmuir isotherm model and pseudo-second-order kinetics, respectively. The CPP showed appreciable Cr(VI) remediation capacity with a maximal loading capacity of 82.99 mg/g at pH 2.0, which was obtained in 180 min at room temperature. Thermodynamic studies revealed the biosorption process as spontaneous, feasible, and thermodynamically favorable. The spent adsorbent was eventually regenerated and reused, and the safe disposal of Cr(VI) was ensured. The study revealed that the CPP can be effectively employed as an affordable sorbent for the excision of Cr(VI) from water.

Vanadium recovery by electrodialysis using polymer inclusion membranes

Industrial applications and environmental awareness recently prompted vanadium recovery spell from secondary resources. In this work, a polymer inclusion membrane containing trioctylmethylammonium chloride as carrier was successfully employed in electrodialysis for vanadium recovery from acidic sulfate solutions. The permeability coefficient of V(V) increased from 0.29 µm·s^-1 (without electric field) to 4.10 µm·s^-1 (with the 20 mA·cm^-2 current density)_. The transport performance of VO₂SO₄^-, which was the predominant species containing V(V) in the acidic region (pH <3), was influenced by the aqueous pH value and sulfate concentration. Under an electric field, a low concentrated H₂SO₄ solution (0.2 M) effectively stripped V(V) from the membranes, avoiding the requirement of a highly concentrated H₂SO₄ without electric field. Under the optimum conditions, the permeability coefficient and flux reached 6.80 µm·s^-1 and 13.34 µmol·m^-2·s^-1, respectively. High selectivity was observed for the separation of V(V) and Mo(VI) from mixed solutions of Co (II), Ni (II), Mn (II), and Al (III). Additionally, the separation between Mo(VI) and V(V) was further improved by adjusting the acidity of the stripping solution. The V(V) selectivity for the resulting membrane was higher than that of commercial anion exchange membranes.

Response of microbial community structure to chromium contamination in Panax ginseng-growing soil

Chromium (Cr) contamination in soil poses a serious security risk for the development of medicine and food with ginseng as the raw material. Microbiome are critical players in the functioning and service of soil ecosystems, but their feedback to Cr-contaminated ginseng growth is still poorly understood. To study this hypothesis, we evaluated the effects of microbiome and different Cr exposure on the soil microbial community using Illumina HiSeq high-throughput sequencing. Our results indicated that 2467 OTUs and 1785 OTUs were obtained in 16S and ITS1 based on 97% sequence similarity, respectively. Bacterial and fungal diversity were affected significantly in Cr-contaminated soil. Besides, Cr contamination significantly changed the composition of the soil bacterial and fungal communities, and some biomarkers were identified in the different classification level of the different Cr-contaminated treatments using LEfSe. Finally, a heatmap of Spearman's rank correlation coefficients and canonical discriminant analysis (CDA) indicated that Chloroflexi, Gemmatimonadetes, Acidobacteria, Verrucomicobia, and Parcubacteria in phylum level and Acidimicrobiia, Gemmatimonadetes, and Deltaproteobacteria in class level were positively correlated with AK, AP, and NO₃^--N (p < 0.05 or p < 0.01), but negatively correlated with total Cr and available Cr (p < 0.05 or p < 0.01). Similarly, in the fungal community, Tubaria, Mortierellaceae, and Rhizophagus in the phylum level and Glomeromycetes, Agaricomycetes, and Exobasidiomycetes in the class level were positively correlated with AK, AP, and NO₃^--N (p < 0.05 or p < 0.01), but negatively correlated with total Cr and available Cr (p < 0.05 or p < 0.01). Our findings provide new insight into the effects of Cr contamination on the microbial communities in ginseng-growing soil.

MnIn2S4 nanosheets growing on rods-like β-MnO2 via covalent bonds as high-performance photocatalyst for boosting Cr(VI) photocatalytic reduction under visible light irradiation: Behavior and mechanism study

It is an urgent and onerous task to develop catalysts for photocatalytic reduction of Cr(VI) in wastewater under wide pH range. In this work, a novel hierarchical Z-scheme MnO₂/MnIn₂S₄ (MISO) heterojunction photocatalyst with MnIn₂S₄ nanosheets growing on the surface of β-MnO₂ nanorods is constructed for efficient photocatalytic reduction of Cr(VI). The optimized 2.0-MISO photocatalyst exhibits the almost 100% reduction efficiency in the pH range of 2.1-5.6 under visible light irradiation, and the apparent rate constant is 0.05814 min^-1, which is 29.96 and 3.27 times higher than the pure β-MnO₂ and MnIn₂S₄, respectively. A efficient photocatalytic reduction of Cr(VI) to Cr(III) species on 2.0-MISO photocatalyst in actual industry wastewater (286.7 mg/L) up to 99.8% is achieved. Under natural light, the 2.0-MISO photocatalyst also shows rapid reduction of Cr(VI) species. The photocorrosion of MnIn₂S₄ was significantly hindered by the construction of heterojunction. And the O₂^- and e^- species are the main active species during the Cr(VI) photoreduction process. The connection mode between MnIn₂S₄ and β-MnO₂ is verified by DFT calculations and a possible photocatalytic mechanism is also proposed.

Characterization and Kinetic Studies of Poly(vinylidene fluoride-co-hexafluoropropylene) Polymer Inclusion Membrane for the Malachite Green Extraction

Textile industry effluent contains a high amount of toxic colorants. These dyes are carcinogenic and threats to the environment and living beings. In this study, poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) was used as the based polymer for PIMs with bis-(2-ethylhexyl) phosphate (B2EHP) and dioctyl phthalate (DOP) as the carrier and plasticizer. The fabricated PIMs were employed to extract the cation dye (Malachite Green; MG) from the feeding phase. PIMs were also characterized by scanning electron microscopy (SEM), atomic force microscope (AFM), contact angle, water uptake, Fourier-transform infrared spectroscopy (FTIR) and ions exchange capacity. The performance of the PIMs was investigated under various conditions such as percentage of carrier and initial dye concentration. With permeability and flux values of 0.1188 cm/min and 1.1913 mg cm/min, PIM produced with 18% w/w PVDF-co-HFP, 21% w/w B2EHP, 1% w/w DOP and 40% w/w THF and was able to achieve more than 97% of MG extraction. The experimental data were then fitted with a pseudo-second-order (PSO) model, and the calculated R2 value was ~0.99. This shows that the data has a good fit with the PSO model. PIM is a potential alternative technology in textile industry effluent treatment; however, the right formulation is crucial for developing a highly efficient membrane.

Electrodialytic Processes: Market Overview, Membrane Phenomena, Recent Developments and Sustainable Strategies

In the context of preserving and improving human health, electrodialytic processes are very promising perspectives. Indeed, they allow the treatment of water, preservation of food products, production of bioactive compounds, extraction of organic acids, and recovery of energy from natural and wastewaters without major environmental impact. Hence, the aim of the present review is to give a global portrait of the most recent developments in electrodialytic membrane phenomena and their uses in sustainable strategies. It has appeared that new knowledge on pulsed electric fields, electroconvective vortices, overlimiting conditions and reversal modes as well as recent demonstrations of their applications are currently boosting the interest for electrodialytic processes. However, the hurdles are still high when dealing with scale-ups and real-life conditions. Furthermore, looking at the recent research trends, potable water and wastewater treatment as well as the production of value-added bioactive products in a circular economy will probably be the main applications to be developed and improved. All these processes, taking into account their principles and specificities, can be used for specific eco-efficient applications. However, to prove the sustainability of such process strategies, more life cycle assessments will be necessary to convince people of the merits of coupling these technologies.

Electrodialysis Applications in Wastewater Treatment for Environmental Protection and Resources Recovery: A Systematic Review on Progress and Perspectives

This paper presents a comprehensive review of studies on electrodialysis (ED) applications in wastewater treatment, outlining the current status and the future prospect. ED is a membrane process of separation under the action of an electric field, where ions are selectively transported across ion-exchange membranes. ED of both conventional or unconventional fashion has been tested to treat several waste or spent aqueous solutions, including effluents from various industrial processes, municipal wastewater or salt water treatment plants, and animal farms. Properties such as selectivity, high separation efficiency, and chemical-free treatment make ED methods adequate for desalination and other treatments with significant environmental benefits. ED technologies can be used in operations of concentration, dilution, desalination, regeneration, and valorisation to reclaim wastewater and recover water and/or other products, e.g., heavy metal ions, salts, acids/bases, nutrients, and organics, or electrical energy. Intense research activity has been directed towards developing enhanced or novel systems, showing that zero or minimal liquid discharge approaches can be techno-economically affordable and competitive. Despite few real plants having been installed, recent developments are opening new routes for the large-scale use of ED techniques in a plethora of treatment processes for wastewater.