CeO2 decorated graphene as separator modification material for capture and boost conversion of polysulfide in lithium-sulfur batteries

In-Situ Grafting Strategy Enables Functional Separator for Advanced Lithium-Sulfur Batteries

A functional separator is developed by in-situ grafting nickel tetraaminophthalocyanine (NiTAPc) onto the surface of polypropylene (PP). It is applied to inhibit the shuttle effect of polysulfides (PSs) in lithium-sulfur(Li-S) batteries. The characterization results showed that NiTAPc is highly dispersed and uniformly grafted onto PP separator. In-situ grafting strategy effectively mitigates the self-agglomeration issue associated with NiTAPc and enhances the exposure of catalytically active Ni-N4 sites. These sites exhibit excellent adsorption and conversion capabilities for PSs. This is consistent with the results of theory calculations, which indicate that the presence of NiTAPc can reduce the delithiation energy barrier associated with Li2S conversion. Owing to the excellent inhibition ability of NiTAPc on the shuttle effect of PSs, the Li-S battery employing a PP-NiTAPc separator demonstrates excellent cycle stability. It shows an initial specific capacity of 1256.5 mAh g-1 at 0.1 C, and a capacity retention of 582.4 mAh g-1 after 500 cycles at 1 C, showcasing a minimal decay rate of 0.0547% per cycle. The strategy adopted in this study offers valuable insights for the development of modified separators for rechargeable batteries and other energy storage fields.

Advanced Separator Materials for Enhanced Electrochemical Performance of Lithium-Sulfur Batteries: Progress and Prospects

Lithium-sulfur (Li-S) batteries are promising energy storage devices owing to their high theoretical specific capacity and energy density. However, several challenges, including volume expansion, slow reaction kinetics, polysulfide shuttle effect and lithium dendrite formation, hinder their commercialization. Separators are a key component of Li-S batteries. Traditional separators, made of polypropylene and polyethylene, have certain limitations that should be addressed. Therefore, this review discusses the basic properties and mechanisms of Li-S battery separators, focuses on preparing different functionalized separators to mitigate the shuttle effect of polysulfides. This review also introduces future research trends, emphasizing the potential of separator functionalization in advancing the Li-S battery technology.

MOF-Derived CeO2 Nanorod as a Separator Coating Enabling Enhanced Performance for Lithium-Sulfur Batteries

The deployment of Li-S batteries in the commercial sector faces obstacles due to their low electrical conductivity, slow redox reactions, quick fading of capacity, and reduced coulombic efficiency. These issues stem from the "shuttle effect" associated with lithium polysulfides (LiPSs). In this work, a haystack-like CeO2 derived from a cerium-based metal-organic framework (Ce-MOF) is obtained for the modification of a polypropylene separator. The carbon framework and CeO2 coexist in this haystack-like structure and contribute to a synergistic effect on the restriction of LiPSs shuttling. The carbon network enhances electron transfer in the conversion of LiPSs, improving the rate performance of the battery. Moreover, CeO2 enhances the redox kinetics of LiPSs, effectively reducing the "shuttle effect" in Li-S batteries. The Li-S battery with the optimized CeO2 modified separator shows an initial discharge capacity of 870.7 mAh/g at 2 C, maintaining excellent capacity over 500 cycles. This research offers insights into designing functional separators to mitigate the "shuttle effect" in Li-S batteries.

Elevating Lithium-Sulfur Battery Durability through Samarium Oxide/Ketjen Black Modified Separator

Lithium-sulfur batteries have garnered significant attention as a promising next-generation battery technology due to their potential for high energy density. However, their practical application is hampered by slow reaction kinetics and the shuttle effect of lithium polysulfide intermediates. In this context, the authors introduce a pioneering solution in the form of a novel porous carbon nanostructure modified with samarium oxide, denoted as Sm2O3/KB. The material has a highly polar surface, allowing lithium polysulfide to be chemisorbed efficiently. The unsaturated sites provided by the oxygen vacancies of Sm2O3 promote Li2S nucleation, lowering the reaction energy barrier and accelerating Li2S dissolution. The porous structure of Ketjen Black provides a highly conductive channel for electron transport and effectively traps polysulfides. Meanwhile, the batteries with Sm2O3/KB/PP spacers exhibited remarkable electrochemical performances, including a low-capacity decay rate of only 0.046 % for 1000 cycles at 2 C and an excellent multiplicative performance of 624 mAh g-1 at 3 C. This work opens up a new avenue for the potential use of rare-earth-based materials in lithium-sulfur batteries.

Heterostructured Co/CeO2-Decorating N-Doped Porous Carbon Nanocubes as Efficient Sulfur Hosts with Enhanced Rate Capability and Cycling Durability toward Room-Temperature Na-S Batteries

Room-temperature sodium-sulfur (RT Na-S) batteries have gained significant interest thanks to their satisfactory energy density and abundant earth resources. Nevertheless, practical implementations of RT Na-S batteries are still impeded by serious shuttle effects of sodium polysulfide (NaPS) intermediates, sluggish redox kinetics of cathodes, and poor electronic conductivity from S-species. To solve these problems, heterostructured Co/CeO2-decorating N-doped porous carbon nanocubes (Co/CeO2-NPC) are constructed as a S support, which integrates the strong adsorption and fast conversion of NaPSs, together with superior electronic conductivity. Consequently, the as-synthesized S@Co/CeO2-NPC cathode for RT Na-S batteries exhibits improved rate performance (1275, 561.1, and 485 mAh g-1 at 0.1, 5, and 10 C, respectively) and superior cyclic durability (capacity degeneration of 0.027% per cycle after 1000 cycles at 5 C). Such a S cathode combining a heterostructure interface, hierarchical porous carbon nanocubes, and polar compositions can considerably increase electronic conductivity and promote NaPS adsorption and conversion, achieving superior performance toward RT Na-S batteries.

Li+ mobility powered by a crystal compound for fast Li-S chemistry

Placing blocking layers between electrodes has shown paramount prospects in suppressing the shuttle effect of Li-S batteries, but the associated ionic transport would be a concurrent obstacle. Herein, we present a Li-based crystal composited with carbon (LiPN2@C) by a one-step annealing of Li+ absorbed melamine polyphosphate, which simultaneously achieves alleviated polysulfide-shuttling and facilitated Li+ transport. As a homologous crystal, LiPN2 with abundant lithiophilic sites makes Li+ transport more efficient and sustainable. With a LiPN2@C-modified separator, the Li2S cathode exhibits a much-lower activation potential of 2.4 V and a high-rate capacity of 519 mA h g-1 at 2C. Impressively, the battery delivers a capacity of 726 mA h g-1 at 0.5C with a low decay rate of 0.25% per cycle during 100 continuous cycles.

A strontium ferrite modified separator for adsorption and catalytic conversion of polysulfides for excellent lithium-sulfur batteries

Lithium-sulfur batteries (LSBs) have emerged as one of the ideal contenders for the upcoming generation of high energy storage devices due to their superb energy density. Nonetheless, the shuttle effect generated by intermediate lithium polysulfides (LiPSs) during cell cycling brings about capacity degradation and poor cycling stability of LSBs. Here, a versatile SrFe₁₂O₁₉ (FSO) and acetylene black (AB) modified PP separator is first presented to inhibit the shuttle effect. Thanks to the strong chemical interaction of Fe and Sr with polysulphides in FSO, it can trap LiPSs and provide catalytic sites for their conversion. Therefore, the cell using the FSO/AB@PP separator has a high initial discharge specific capacity (930 mA h g^-1) at 2 C and lasts for 1000 cycles with a remarkably low fading rate (0.036% per cycle), while those using PE and AB@PP separators have inferior initial specific capacities (255 mA h g^-1 and 652 mA h g^-1, respectively) and fail within 600 cycles. This work proposes a novel approach for addressing the shuttle of LiPSs from a bimetallic oxide modified separator.

Bimetallic AuPt alloy/rod-like CeO2 nanojunctions with high peroxidase-like activity for colorimetric sensing of organophosphorus pesticides

Organophosphorus pesticides (OP) have extensive applications in agriculture, while their overuse causes inevitable residues in food, soil, and water, ultimately being harmful to human health and even causing diverse dysfunctions. Herein, a novel colorimetric platform was established for quantitative determination of malathion based on peroxidase mimic AuPt alloy decorated on CeO₂ nanorods (CeO₂@AuPt NRs). The synthesized nanozyme oxidized colorless 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. Besides, the oxidized TMB was inversely reduced by ascorbic acid (AA), which were originated from hydrolysis of L-ascorbic acid-2-phosphate (AA2P) with the assistance of acid phosphatase (ACP). Based upon this observation ACP analysis was explored by colorimetry, showing a wid linear range of 0.2 ~ 3.5 U L^-1 and a low limit of detection (LOD = 0.085 U L^-1, S/N = 3). Furthermore, malathion present in the colorimetric system inhibited the activity of ACP and simultaneously affected the generation of AA, in turn promoting the recovery of the chromogenic reaction. Based on this, the LOD was decreased to 1.5 nM (S/N = 3) for the assay of malathion with a wide linear range of 6 ~ 100 nM. This simple colorimetric platform provides some informative guidelines for determination of other pesticides and disease markers.

Adsorption-catalysis design with cerium oxide nanorods supported nickel-cobalt-oxide with multifunctional reaction interfaces for anchoring polysulfides and accelerating redox reactions in lithium sulfur battery

The charge and discharge working mechanisms in lithium sulfur batteries contain multi-step complex reactions involving two-electron transfer and multiple phase transformations. The dissolution and diffusion of lithium polysulfides cause a huge loss of active material and fast capacity decay, preventing the practical use of lithium sulfur batteries. Herein, CeO₂ nanorods supported bimetallic nickel cobalt oxide (NiCo₂O_x) was investigated as a cathode host material for lithium sulfur batteries, which can provide adsorption-catalysis dual synergy to restrain the shuttle of polysulfides and stimulate rapid redox reaction for the conversion of polysulfides. The polar CeO₂ nanorods with abundant surface defects exhibit chemisorption towards lithium polysulfides and the excellent electrocatalytic activity of NiCo₂O_x nanoclusters can rev up the chain transformation of lithium polysulfides. The electrochemical results show that the battery with NiCo₂O_x/CeO₂ nanorods can demonstrate high discharge capacity, stable cycling, low voltage polarization and high sulfur utilization. The battery with NiCo₂O_x/CeO₂ nanorods unveils a high specific capacity of 1236 mAh g^-1 with a very low capacity fading of 0.09% per cycle after 100 cycles at a 0.2C current rate. Moreover, the excellent performance with high sulfur loading (>5 mg cm^-2) verifies a huge promise for future commercial applications.

Efficient Regulation of Polysulfides by MoS2 /MoO3 Heterostructures for High-Performance Li-S Batteries

The notorious shuttle effect and sluggish conversion of polysulfides seriously hinder the practical application of Lithium-sulfur (Li-S) batteries. In this study, a novel architecture of MoS₂ /MoO₃ heterostructure uniformly distributed on carbon nanotubes (MoS₂ /MoO₃ @CNT) is designed and introduced into Li-S batteries via decorating commercial separator to regulate the redox reactions of polysulfides. Systematic experiments and theoretical calculations showed that the heterostructure not only provides sufficient surface affinity to capture polysulfides and acts as an active catalyst to promote the conversion of polysulfides, but also the highly conductive CNT enables rapid electron/ion migration. As a result, Li-S batteries with the MoS₂ /MoO₃ @CNT-PP separator deliver an impressive reversible capacity (1015 mAh g^-1 at 0.2 A g^-1 after 100 cycles), excellent rate capacity (873 mAh g^-1 at 5 A g^-1 ), and low self-discharge capacity loss (94.6% capacity retention after 7 days of standing). Moreover, even at an elevated temperature of 70 °C, it still exhibits high-capacity retention (800 mAh g^-1 at 1 A g^-1 after 100 cycles). Encouragingly, when the sulfur load is increased to 8.7 mg cm^-2 , the high reversible areal capacity of 6.61 mAh cm^-2 can be stably maintained after 100 cycles, indicating a high potential for practical application.

Recent advances and perspectives of CeO2-based catalysts: Electronic properties and applications for energy storage and conversion

Cerium dioxide (CeO₂, ceria) has long been regarded as one of the key materials in modern catalysis, both as a support and as a catalyst itself. Apart from its well-established use (three-way catalysts and diesel engines), CeO₂ has been widely used as a cocatalyst/catalyst in energy conversion and storage applications. The importance stems from the oxygen storage capacity of ceria, which allows it to release oxygen under reducing conditions and to store oxygen by filling oxygen vacancies under oxidizing conditions. However, the nature of the Ce active site remains not well understood because the degree of participation of f electrons in catalytic reactions is not clear in the case of the heavy dependence of catalysis theory on localized d orbitals at the Fermi energy E _F . This review focuses on the catalytic applications in energy conversion and storage of CeO₂-based nanostructures and discusses the mechanisms for several typical catalytic reactions from the perspectives of electronic properties of CeO₂-based nanostructures. Defect engineering is also summarized to better understand the relationship between catalytic performance and electronic properties. Finally, the challenges and prospects of designing high efficiency CeO₂-based catalysts in energy storage and conversion have been emphasized.

Fabrication of CeO2/GCE for Electrochemical Sensing of Hydroquinone

Hydroquinone is a widely used derivative of phenol which has a negative influence on human beings and the environment. The determination of the accurate amount of hydroquinone is of great importance. Recently, the fabrication of an electrochemical sensing device has received enormous attention. In this study, we reported on the facile synthesis of cerium dioxide (CeO₂) nanoparticles (NPs). The CeO₂ NPs were synthesized using cerium nitrate hexahydrate as a precursor. For determining the physicochemical properties of synthesized CeO₂ NPs, various advanced techniques, viz., powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS), were studied. Further, these synthesized CeO₂ NPs were used for the modification of a glassy carbon electrode (CeO₂/GCE), which was utilized for the sensing of hydroquinone (HQ). A decent detection limit of 0.9 µM with a sensitivity of 0.41 µA/µM cm² was exhibited by the modified electrode (CeO₂/GCE). The CeO₂/GCE also exhibited good stability, selectivity, and repeatability towards the determination of HQ.

The effect of different poly fibers separator-modified materials on blocking polysulfides for high performance Li-S batteries

Herein, we reported that KOH impregnation can generate a large number of porous structures with fruitful nitrogen self-doped groups during the carbonized process for poly (p-phenylene terephthalamide) fiber and poly (p-phenylene benzobisoxazole) fiber (denoted as PPTA and PBO, respectively). The intrinsical insulation, volume change, and shuttle effect of polysulfides then can be more significantly improved for the PBO-coated separator than the PPTA case. The discharge capacity primary achieves 1,322 mA h/g, which retains 827 mA h/g even after 200 cycles at 0.2 C for the cell with PBO-coated separator. The reversible specific discharge capacity maintains 841 mA h/g with a Coulomb efficiency of 99.7% at 5 C. The nitrogen self-doped nanocarbon particles are etched by KOH with the simple one-step preparation, which has promising application as Li-S battery cathode.

An interwoven carbon nanotubes/cerium dioxide electrocatalyst accelerating the conversion kinetics of lithium sulfide toward high-performance lithium-sulfur batteries

Rechargeable lithium-sulfur (Li-S) batteries with environmental friendliness, low price, high specific capacity and energy density could be promising alternatives to a larger scope of energy storage in the near future. However, the practical application is impeded by the intrinsic insulation of sulfur and the fatal shuttle effect during the (dis)charging process. Herein, we report a strategy to address the drawbacks of Li-S batteries by inserting an interwoven carbon nanotubes/cerium dioxide electrocatalyst interlayer material (CNTs@CeO₂) between the sulfur cathode and the separator. In the CNTs@CeO₂ composite, the conductive network interwoven by CNTs facilitates electron transportation, and the abundant active sites in CeO₂ cavities ensuring the adsorption-catalytic conversion of lithium polysulfides as well as the hollow structure of CeO₂ is conducive to rapid electrolyte penetration and lithium ion migration. Benefiting from such multifunction, the battery with a CNTs@CeO₂ interlayer exhibits superior rate performance, delivering a high discharge specific capacity of 1040.6 mAh g^-1 at 0.2C and 652.5 mAh g^-1 at 4C, respectively. Moreover, the battery shows excellent cycling stability with a capacity decay rate of 0.064% per cycle at 1C over 1000 cycles. These promising results demonstrate the potential application of CeO₂-based electrocatalysts for high energy density Li-S batteries.

A novel battery separator coated by a europium oxide/carbon nanocomposite enhances the performance of lithium sulfur batteries

Lithium sulfur (Li-S) batteries represent one of the most promising future power batteries due to their remarkable advantages of low cost and ultrahigh theoretical energy density. However, the commercial applications of Li-S batteries have long been plagued by the shuttling effect of polysulfides and sluggish redox kinetics of these species. Herein, we designed a novel battery separator coated by a europium oxide-doped porous Ketjen Black (Eu₂O₃/KB) and tested its performance for the Li-S batteries for the first time. Experimental results and theoretical calculations reveal that the improved electrochemical performance can be attributed to the presence of Eu₂O₃. The strong binding effect between Eu₂O₃ and polysulfides is demonstrated in two aspects: (1) there exist strong interactions between Eu₂O₃ as a Lewis acid and polysulfides of strong Lewis basicity; (2) Eu₂O₃ with oxygen-vacancy defects provides active sites for catalyzing polysulfide conversion and polysulfide trapping. Thus, a Li-S battery with the Eu₂O₃/KB modified separator delivers highly stable cycling performance and excellent rate capability, with the capacity decay ratio of merely 0.05% per cycle under 1 C rate during 500 cycles, and high specific capacity of 563 mAh g^-1 at 3 C rate. This work offers a meaningful exploration of the application of rare earth oxides for the modification of the separator towards high performance Li-S batteries.

Polyaniline-Encapsulated Hollow Co-Fe Prussian Blue Analogue Nanocubes Modified on a Polypropylene Separator To Improve the Performance of Lithium-Sulfur Batteries

Recent studies of lithium-sulfur (Li-S) batteries have identified that a modified separator plays a critical role in challenging the capacity fading and shuttle effect of lithium polysulfides (LiPSs). Herein, we report a polyaniline-encapsulated hollow Co-Fe Prussian blue analogue (CFP@PANI) for separator modification. The open frame-like hollow CFP was synthesized via oriented attachment (OA). To improve the catalytic effect and electrical conductivity, PANI was coated on the synthesized CFP. The resulting CFP@PANI was applied on the conventional polypropylene (PP) separator (CFP@PANI-PP) with vacuum filtration. With a ketjen black/sulfur (KB/S) cathode with 66% of the sulfur load, the CFP@PANI-PP exhibited an initial capacity of 723.1 mAh g^-1 at a current density of 1 A g^-1. Furthermore, the CFP@PANI-PP showed stable cycling performance with 83.5% capacity retention after 100 cycles at 1 A g^-1. During the 100 cycles, each cycle maintained high coulombic efficiency above 99.5%, which indicates that the CFP@PANI-PP could inhibit LiPS migration to the anode side without a Li⁺ transport disturbance across the separator. Overall, the CFP@PANI-PP efficiently suppressed LiPSs, resulting in enhanced electrochemical performance. The current study provides useful insight into designing a nanostructure for separator modification of Li-S batteries.

Tg-C3N4-coated functional separator as polysulfide barrier of high-performance lithium-sulfur batteries

Lithium sulfur (Li-S) battery is considered as a promising alternative for the development of battery technologies. However, the shuttle effect seriously limits its practical use. Herein, hollow tubular graphene-like carbon nitride (Tg-C₃N₄) is synthesized and utilized as a functional interlayer to inhibit shuttling effect and promote catalytic kinetics. Both experiments and DFT calculations together suggest that N-doping enhances the electron transfers between Tg-C₃N₄and LiPSs, leading to improved chemical adsorptions and catalytic effects towards the redox conversions of the active sulfur species. Besides, Tg-C₃N₄delivers a unique hollow tubular architecture with massive ion transfer pathways and fully exposed active interfaces. In addition, the abundant C-N heteroatomic structures also impose strong chemical immobilization toward lithium polysulfides. Benefiting from these unique superiorities, the cell with the Tg-C₃N₄-modified separator exhibits a reversible capacity of 494 mAh g^-1after 500 cycles at 1 C with a negligible capacity decay of 0.085% per cycle, indicating an efficient strategy toward high-performance modified separators.

Efficient polysulfide trapping in lithium-sulfur batteries using ultrathin and flexible BaTiO3/graphene oxide/carbon nanotube layers

Ultrathin and flexible layers containing BaTiO₃ (BTO) nanoparticles, graphene oxide (GO) sheets, and carbon nanotube (CNT) films (BTO/GO@CNT) are used to trap solvated polysulfides and alleviate the shuttle effect in lithium-sulfur (Li-S) batteries. In the functional layers, the CNT films build a conductive framework, and the GO sheets form a support membrane for the uniform dispersion of BTO nanoparticles. BTO nanoparticles without ferroelectricity (nfBTO) can trap polysulfides more effectively by chemical interaction compared to BTO nanoparticles with ferroelectricity (fBTO). A Li-S cell with the nfBTO/GO@CNT functional layer exhibits a reversible capacity of 824.5 mA h g^-1 over 100 cycles at 0.2 C. At a high sulfur loading of 5.49 mg cm^-2, an electrode with the functional layer shows an areal capacity of 5.15 mA h cm^-2 at 0.1 C, demonstrating the nfBTO/GO@CNT functional layer's potential in developing high-performance Li-S batteries.