Modulating surface interactions for regenerable separation of oil-in-water emulsions

Engineering Protein-Based Lipid-Binding Nanovesicles via Catechol-Amine-Derived Coacervation with Their Underlying Interfacial Mechanisms

The development of nonphospholipid nanovesicles has garnered tremendous attention as a viable alternative to traditional liposomal nanovesicles. Protein/peptide-based nanovesicles have demonstrated their potential to reduce immunogenicity while enhancing bioactivity. However, a fundamental understanding of how proteinaceous vesicles interact with lipids and cell membranes remains elusive. In this study, we engineered a series of protamine-based nonphospholipid nanovesicles by modulating intramolecular catechol-amine interactions. By grafting trihydroxybenzene (GA) and catechol (CA) groups onto the protamine (Prot), a salt-triggered coacervation was observed in an alkaline environment with the size of as-prepared vesicles ranging from 200 to 1200 nm. The bonding affinity to lipid interfaces followed the order of Prot-CA-Fe3+(25 μM) > Prot-CA-Fe3+(10 μM) > Prot-CA > original Prot with the underlying nanomechanics investigated by the lipid bubble force measurement. Direct quantification of interactions between the nanovesicles and living human gingival fibroblasts was performed by using surface charge difference mapping. Introducing trace amounts of Fe3+ (at 10 and 25 μM) enhanced vesicle-lipid interactions via the synergy of catechol-amine interactions and Fe3+-induced complexation. This work provides improved valuable insights into the interactions between nanovesicles and cell membranes, offering an energetic paradigm for modulating cell-target delivery processes via intramolecular short-range interactions.

Antifouling hydrogel with different mechanisms:Antifouling mechanisms, materials, preparations and applications

Biofouling is a long-standing problem for biomedical devices, membranes and marine equipment. Eco-friendly hydrogels show great potential for antifouling applications due to their unique antifouling characteristics. However, a single antifouling mechanism cannot meet a wider practical application of antifouling hydrogels, combined with multiple antifouling mechanisms, the various antifouling advantages can be played, as well as the antifouling performance and service life of antifouling hydrogel can be improved. For the construction of the antifouling hydrogel with multiple antifouling mechanisms, the antifouling mechanisms that have been used in antifouling hydrogels should be analyzed. Hence, this review focus on five major antifouling mechanisms used in antifouling hydrogel: hydration layer, elastic modulus, antifoulant modification, micro/nanostructure and self-renewal surface construction. The methods of exerting the above antifouling mechanisms in hydrogels and the materials of preparing antifouling hydrogel are introduced. Finally, the development of antifouling hydrogel in biomedical materials, membrane and marine related field is summarized, and the existing problems as well as the future trend of antifouling hydrogel are discussed. This review provides reasonable guidance for the future and application of the construction of antifouling hydrogels with multiple antifouling mechanisms.

Hygroscopic Growth of Adsorbed Water Films on Smectite Clay Particles

Hygroscopic growth of adsorbed water films on clay particles underlies a number of environmental science questions, from the air quality and climate impacts of mineral dust aerosols to the hydrology and mechanics of unsaturated soils and sedimentary rocks. Here, we use molecular dynamics (MD) simulations to establish the relation between adsorbed water film thickness (h) and relative humidity (RH) or disjoining pressure (Π), which has long been uncertain due to factors including sensitivity to particle shape, surface roughness, and aqueous chemistry. We present a new MD simulation approach that enables precise quantification of Π in films up to six water monolayers thick. We find that the hygroscopicity of phyllosilicate mineral surfaces increases in the order mica < K-smectite < Na-smectite. The relationship between Π and h on clay surfaces follows a double exponential decay with e-folding lengths of 2.3 and 7.5 Å. The two decay length scales are attributed to hydration repulsion and osmotic phenomena in the electrical double layer (EDL) at the clay-water interface.

Bioinspired engineered proteins enable universal anchoring strategy for surface functionalization

HYPOTHESIS

Conventional coating strategies and materials for bio-applications with protective, diagnostic, and therapeutic functions are commonly limited by their arduous preparation processes and lack of on-demand functionalities. Herein, inspired by the 'root-leaf' structure of grass, a series of novel polyacrylate-conjugated proteins can be engineered with sticky bovine serum albumin (BSA) protein as a 'root' anchoring layer and a multifunctional polyacrylate as a 'leaf' functional layer for the facile coating procedure and versatile surface functionalities.

EXPERIMENTS

The engineered proteins were synthesized based on click chemistry, where the 'root' layer can universally anchor onto both organic and inorganic substrates through a facile dip/spraying method with excellent stability in harsh solution conditions, thanks to its multiple adaptive molecular interactions with substrates that further elucidated by molecular force measurements between the 'root' BSA protein and substrates. The 'leaf' conjugated-polyacrylates imparted coatings with versatile on-demand functionalities, such as resistance to over 99% biofouling in complex biofluids, pH-responsive performance, and robust adhesion with various nanomaterials.

FINDINGS

By synergistically leveraging the universal anchoring capabilities of BSA with the versatile physicochemical properties of polyacrylates, this study introduces a promising and facile strategy for imparting novel functionalities to a myriad of surfaces through engineering natural proteins and biomaterials for biotechnical and nanotechnical applications.

Capillary detachment of a microparticle from a liquid-liquid interface

The attachment and detachment of microparticles at a liquid-liquid interface are common in many material systems, from Pickering emulsions and colloidal assemblies to capillary suspensions. Properties of these systems rely on how the particles interact with the liquid-liquid interface, including the detachment process. In this study, we simultaneously measure the capillary detachment force of a microparticle from a liquid-liquid interface and visualize the shape of the meniscus by combining colloidal probe microscopy and confocal microscopy. The capillary behavior is studied on both untreated (hydrophilic) and fluorinated (hydrophobic) glass microparticles. The measured force data show good agreement with theoretical calculations based on the extracted geometric parameters from confocal images of the capillary bridge. It is also evident that contact line pinning is an important aspect of detachment for both untreated and fluorinated particles.

Designing Bio-Inspired Wet Adhesives through Tunable Molecular Interactions

Marine organisms, such as mussels and sandcastle worms, can master rapid and robust adhesion in turbulent seawater, becoming leading archetypes for the design of underwater adhesives. The adhesive proteins secreted by the organisms are rich in catecholic amino acids along with ionic and amphiphilic moieties, which mediate the adaptive adhesion mainly through catechol chemistry and coacervation process. Catechol allows a broad range of molecular interactions both at the adhesive-substrate interface and within the adhesive matrix, while coacervation promotes the delivery and surface spreading of the adhesive proteins. These natural design principles have been translated to synthetic systems toward the development of biomimetic adhesives with water-resist adhesion and cohesion. This review provides an overview of the recent progress in bio-inspired wet adhesives, focusing on two aspects: (1) the elucidation of the versatile molecular interactions (e.g., electrostatic interactions, metal coordination, hydrogen bonding, and cation-π/anion-π interactions) used by natural adhesives, mainly through nanomechanical characterizations; and (2) the rational designs of wet adhesives based on these biomimetic strategies, which involve catechol-functionalized, coacervation-induced, and hydrogen bond-based approaches. The emerging applications (e.g., tissue glues, surgical implants, electrode binders) of the developed biomimetic adhesives in biomedical, energy, and environmental fields are also discussed, with future research directions proposed.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

High-efficiency and durable removal of water-in-heavy oil emulsions enabled by delignified and carboxylated basswood with zwitterionic nanohydrogel coatings

HYPOTHESIS

It is hypothesized that grafting zwitterionic nanohydrogel (ZNG) helps to achieve anti-asphaltene properties on cellulosic substrates, thus overcoming the fouling issue of natural cellulosic materials for treating oily emulsions. It is also hypothesized that ZNG coatings enhance the water-binding affinity of the substrates, resulting in an outstanding water-removal performance on asphaltene-stabilized emulsions with long-term stability.

EXPERIMENTS

A cellulosic substrate was derived from nature basswood via a sequence of delignification and carboxylation processes. The ZNG-DBS composite was then developed by esterification to covalently graft ZNGs on the inner channels of the substrate. The water-binding affinity, wettability, water-removal performance for treating water in asphaltene-stabilized emulsions were evaluated via characterizing the filtration/absorption, and anti-fouling mechanism of the ZNG-DBS.

FINDINGS

ZNG coatings enhance the hydration capability of the basswood substrate, allowing it to absorb water emulsion droplets protected by asphaltenes in the oil medium without being contaminated. Moreover, superior and stable removal capabilities were achieved by using this unique material to treat asphaltenes-stabilized water-in-oil emulsions with the water residue content of <1.0 and ∼0.065 wt% via cyclic filtration and absorption tests, respectively. Our results demonstrate the successful conversion of widely accessible wood resources to functional materials with great potential in the practical treatment of oily wastewater.

Recent Progress in Microfiltration/Ultrafiltration Membranes for Separation of Oil and Water Emulsions

Oily wastewater has become one of the leading causes of environmental pollution. A massive quantity of oily wastewater is released from industries, oil spills, and routine activities, endangering the ecosystem's sustainability. Due to the enormous negative impact, researchers put strenuous efforts into developing a sustainable solution to treat oily wastewater. Microfiltration/ultrafiltration membranes are considered an efficient solution to treat oily wastewater due to their low cost, small footprint, facile operation, and high separation efficiencies. However, membranes severely fouled during the separation process due to oil's adsorption and cake layer formation, which shortens the membranes' life. This review has critically discussed the microfiltration/ultrafiltration membrane synthesizing methods and their emulsion's separation performance. In the end, key challenges and their possible solutions are highlighted to provide future direction to synthesize next-generation membranes.