Investigating the stability of electrically conductive membranes

Multifunctional polysulfone composite membranes via constructing electrically conductive gradient and magnetic-core/electric-shell dual-gradient microstructures: A strategy to tackle multiple hazards

The rapid advancement of industries and technologies leads to the emergence of new pollutants such as dyeing wastewater and electromagnetic interference (EMI), and their efficient treatment poses great challenges for traditional materials and methods. Herein, a novel electrically conductive membrane (ECM) was fabricated on a large scale through the electric field-assisted membrane formation. Carbon nanotubes (CNTs) and carbon black (CB) were uniformly dispersed in dope solution by strong hydrogen bonding with suitable polyvinylpyrrolidone (PVP) molecules. They moved towards the coating layer upper surface under an electric field, forming electrically conductive gradient microstructures. Subsequently, a stable electrically conductive skin layer was generated due to the excellent film-forming ability of PVP, which hindered the loss of CNTs and CB into coagulating bath. The optimized membrane possessed a high electrical conductivity of 34.3 ± 0.7 S/m, and exhibited superior permeate fluxes (>515.6 L/m2 h·bar), dye rejections (>87.1 %) and flux recovery ratios (>91.5 %) in the electric-assisted filtration. Moreover, magnetic Fe3O4 nanoparticles were incorporated on the bottom surface and inside the pores by vacuum filtration, yielding an innovative magnetic-core/electric-shell dual-gradient microstructure. Electromagnetic wave went through an "absorption-multiple reflection/absorption-strong reflection-reabsorption/multiple reflection" process within the membrane, and then was consumed through the superposition of magnetic loss, polarization loss and conducting loss. Accordingly, the membrane displayed an EMI shielding efficiency of 23.6 ± 0.5 dB with a thickness of 0.2 mm at a low CB-CNTs loading of 20 wt%. This work provides a strategic framework for designing adaptable multifunctional membranes, bridging critical applications from wastewater remediation to next-generation electronic shielding technologies.

Pharmaceutical strategies for optimized mRNA expression

Messenger RNA (mRNA)-based immunotherapies and protein in situ production therapies hold great promise for addressing theoretically all the diseases characterized by aberrant protein levels. The safe, stable, and precise delivery of mRNA to target cells via appropriate pharmaceutical strategies is a prerequisite for its optimal efficacy. In this review, we summarize the structural characteristics, mode of action, development prospects, and limitations of existing mRNA delivery systems from a pharmaceutical perspective, with an emphasis on the impacts from formulation adjustments and preparation techniques of non-viral vectors on mRNA stability, target site accumulation and transfection efficiency. In addition, we introduce strategies for synergistical combination of mRNA and small molecules to augment the potency or mitigate the adverse effects of mRNA therapeutics. Lastly, we delve into the challenges impeding the development of mRNA drugs while exploring promising avenues for future advancements.

Electrochemical filtration for drinking water purification: A review on membrane materials, mechanisms and roles

Electrochemical filtration can not only enrich low concentrations of pollutants but also produce reactive oxygen species to interact with toxic pollutants with the assistance of a power supply, making it an effective strategy for drinking water purification. In addition, the application of electrochemical filtration facilitates the reduction of pretreatment procedures and the use of chemicals, which has outstanding potential for maximizing process simplicity and reducing operating costs, enabling the production of safe drinking water in smaller installations. In recent years, the research on electrochemical filtration has gradually increased, but there has been a lack of attention on its application in the removal of low concentrations of pollutants from low conductivity water. In this review, membrane substrates and electrocatalysts used to improve the performance of electrochemical membranes are briefly summarized. Meanwhile, the application prospects of emerging single-atom catalysts in electrochemical filtration are also presented. Thereafter, several electrochemical advanced oxidation processes coupled with membrane filtration are described, and the related working mechanisms and their advantages and shortcomings used in drinking water purification are illustrated. Finally, the roles of electrochemical filtration in drinking water purification are presented, and the main problems and future perspectives of electrochemical filtration in the removal of low concentration pollutants are discussed.

Iron Nanoparticle-Incorporated Laser-Induced Graphene Filters for Environmental Remediation via an In Situ Electro-Fenton Process

Laser-induced graphene (LIG) has garnered much attention due to its facile and chemically free fabrication technique. Metal nanoparticle incorporation into the LIG matrix can improve its electrical and catalytical properties for environmental application. Here, we demonstrate the fabrication of nanoscale zerovalent iron (nZVI) nanoparticle-incorporated LIG (Fe-LIG) and sulfidized-nanoscale zerovalent iron (S-nZVI) nanoparticle-incorporated LIG (SFe-LIG) surfaces. The sheets were first fabricated to investigate nanoparticle loading, successful incorporation in the LIG matrix, and electrochemical performance as electrodes. Fe-LIG and SFe-LIG sheets showed ∼3-3.5 times more charge density as compared with the control LIG sheet. The XPS and its deconvolution confirmed the presence of nZVI and S-nZVI in the Fe-LIG and SFe-LIG surfaces, which can generate in situ hydroxyl radical (•OH) via iron activation of electrogenerated hydrogen peroxide (H2O2) in short in situ electro-Fenton process. After confirmation of the successful incorporation of iron-based nanoparticles in the LIG matrix, filters were fabricated to demonstrate the application in the flow-through filtration. The Fe-LIG and SFe-LIG filters showed ∼10-30% enhanced methylene blue removal under the application of 2.5 V at ∼1000 LMH flux. The Fe-LIG and SFe-LIG filters also showed complete 6-log bacteria and virus removal at 2.5 and 5 V, respectively, while the LIG filters showed only ∼4-log removal. Such enhanced removal by the Fe-LIG and SFe-LIG filters as compared to LIG filters is attributed to the improved charge density, electrochemical activity, and in situ electro-Fenton process. The study shows the potential to develop catalytic LIG-based surfaces for various applications, including contaminant removal and microbial inactivation.

Production of Stable Electrically Conductive PVDF Membranes Based on Polydopamine-Polyethyleneimine-Assisted Deposition of Carbon Nanotubes

Electrically conductive membranes (ECMs) have emerged as a multifunctional separation technology that integrates membrane filtration with electrochemical reactions. Physical stability remains a critical challenge for ECMs synthesized by coating polymer membranes with conductive materials. In this article, polydopamine (PDA) and polyethyleneimine (PEI) were used to facilitate the synthesis of significantly more stable ECMs using poly(vinylidene fluoride) (PVDF) ultrafiltration membranes and carbon nanotubes (CNTs). Four different synthesis methods were compared in terms of the final surface stability and separation properties: (1) CNTs deposited on PEI-crosslinked PDA-coated PVDF membranes, (2) PEI-crosslinked CNTs deposited on PDA-coated PVDF, (3) PDA, PEI and CNTs sequentially deposited layer-by-layer on PVDF, and (4) PEI-crosslinked PDA deposited on CNT-coated PVDF. The results revealed that method 1 generated ECMs with the greatest physical stability, highest electrical conductivity (18,518 S/m), and sufficient permeability (395.2 L/(m2·h·bar). In comparison, method 2 resulted in membranes with the highest permeability (2128.5 L/(m2·h·bar), but with low surface conductivity (502 S/m) and poor physical stability (i.e., 53-75% lower peel-off forces compared to other methods). Overall, methods 1, 3, and 4 can be used to make highly conductive membranes with a 97-99% removal of methyl orange by electrochemical degradation at -3 V.

Lipid Nanoparticle-Based Delivery System-A Competing Place for mRNA Vaccines

mRNA, as one of the foci of biomedical research in the past decade, has become a candidate vaccine solution for various infectious diseases and tumors and for regenerative medicine and immunotherapy due to its high efficiency, safety, and effectiveness. A stable and effective delivery system is needed to protect mRNAs from nuclease degradation while also enhancing immunogenicity. The success of mRNA lipid nanoparticles in treating COVID-19, to a certain extent, marks a milestone for mRNA vaccines and also promotes further research on mRNA delivery systems. Here, we explore mRNA vaccine delivery systems, especially lipid nanoparticles (LNPs), considering the current research status, prospects, and challenges of lipid nanoparticles, and explore other mRNA delivery systems.

Lipid Nanoparticles Optimized for Targeting and Release of Nucleic Acid

Lipid nanoparticles (LNPs) are currently the most promising clinical nucleic acids drug delivery vehicles. LNPs prevent the degradation of cargo nucleic acids during blood circulation. Upon entry into the cell, specific components of the lipid nanoparticles can promote the endosomal escape of nucleic acids. These are the basic properties of lipid nanoparticles as nucleic acid carriers. As LNPs exhibit hepatic aggregation characteristics, enhancing targeting out of the liver is a crucial way to improve LNPs administrated in vivo. Meanwhile, endosomal escape of nucleic acids loaded in LNPs is often considered inadequate, and therefore, much effort is devoted to enhancing the intracellular release efficiency of nucleic acids. Here, different strategies to efficiently deliver nucleic acid delivery from LNPs are concluded and their mechanisms are investigated. In addition, based on the information on LNPs that are in clinical trials or have completed clinical trials, the issues that are necessary to be approached in the clinical translation of LNPs are discussed, which it is hoped will shed light on the development of LNP nucleic acid drugs.

Simple and Low-Cost Electroactive Membranes for Ammonia Recovery

Ammonia is considered a contaminant to be removed from wastewater. However, ammonia is a valuable commodity chemical used as the primary feedstock for fertilizer manufacturing. Here we describe a simple and low-cost ammonia gas stripping membrane capable of recovering ammonia from wastewater. The material is composed of an electrically conducting porous carbon cloth coupled to a porous hydrophobic polypropylene support, that together form an electrically conductive membrane (ECM). When a cathodic potential is applied to the ECM surface, hydroxide ions are produced at the water-ECM interface, which transforms ammonium ions into higher-volatility ammonia that is stripped across the hydrophobic membrane material using an acid-stripping solution. The simple structure, low cost, and easy fabrication process make the ECM an attractive material for ammonia recovery from dilute aqueous streams, such as wastewater. When paired with an anode and immersed into a reactor containing synthetic wastewater (with an acid-stripping solution providing the driving force for ammonia transport), the ECM achieved an ammonia flux of 141.3 ± 14.0 g.cm^-2.day^-1 at a current density of 6.25 mA.cm^-2 (69.2 ± 5.3 kg(NH₃-N)/kWh). It was found that the ammonia flux was sensitive to the current density and acid circulation rate.

Magnéli-Phase Ti4O7-Doped Laser-Induced Graphene Surfaces and Filters for Pollutant Degradation and Microorganism Removal

Laser-induced graphene (LIG) has recently become a point of attraction globally as an environmentally friendly method to fabricate graphene foam in a single step using a CO₂ laser. The electrical properties of LIG are studied in different environmental applications, such as bacterial inactivation, antibiofouling, and pollutant sensing. Furthermore, metal or nonmetal doping of graphene enhances its catalytical performance in pollutant degradation and decontamination. Magnéli phase (Ti_nO_2n-1) is a substoichiometric titanium oxide known for its high electrocatalytic behavior and chemical inertness and is being explored as a membrane or electrode material for environmental decontamination. Here, we show the fabrication and characterization of LIG-Magnéli-phase (Ti₄O₇) titanium suboxide composites as electrodes and filters on poly(ether sulfone). Unlike undoped LIG electrodes, the doped Ti₄O₇-LIG electrodes exhibit enhanced electrochemical activity, as demonstrated in electrochemical characterization using cyclic voltammetry and electrochemical impedance spectroscopy. Due to the in situ generation of hydroxyl radicals on the surface, the doped electrodes exhibit increase in methylene blue degradation and microorganism removal. Effects of voltage and doping were examined, resulting in a clear trend of degradation and decontamination performance proportional to the doping concentration and applied voltage giving the best result at 2.5 V for 10% Ti₄O₇ doping. The LIG-Ti₄O₇ surfaces also showed biofilm inhibition against mixed bacterial culture. The flow-through filtration using a LIG-Ti₄O₇ conductive filter showed complete bacterial killing with 6 log removal in the permeate at 2.5 V, an enhancement of ∼2.5 log compared to undoped LIG filters at a flow rate of ∼500 L m^-2 h^-1. The facile fabrication of Ti₄O₇-doped LIG with enhanced electrochemical properties can be effectively used for energy and environmental applications.

Methods for stability assessment of electrically conductive membranes

The surface properties of electrically conductive membranes (ECMs) govern their advanced abilities. During operation, these properties may differ considerably from their initially measured properties. Depending on their operating conditions, ECMs may undergo various degrees of passivation. ECM passivation can detrimentally impact their real time performance, causing large deviations from expected behaviour based on their initially measured properties. Quantifying these changes will enable consistent performance comparisons across the active and electrically conductive membrane research field. As such, consistent methods must be established to quantify ECM membrane properties. In this work, we proposed three standardized methods to assess the electrochemical, chemical, and physical stability of such membrane coatings: 1) electrochemical oxidation, 2) surface scratch testing, and 3) pressurized leaching. ECMs were synthesized by the most common approach - coating support ultrafiltration (UF) and/or microfiltration (MF) polyethersulfone (PES) membranes with carbon nanotubes (CNT) cross-linked with polyvinyl alcohol (PVA) and two types of cross-linkers (either succinic acid (SA) or glutaraldehyde (GA)). We then evaluated these ECMs based on the three standardized methods: 1) We evaluated electrochemical stability as a function of electro-oxidation induced by applying anodic potentials. 2) We measured the scratch resistance to quantify the surface mechanical stability. 3) We measured physical stability by quantifying the leaching of PVA during separation of a model foulant (polyethylene oxide (PEO)). Our methods can be extended to all types of electrically conductive membranes including MF, UF, nanofiltration (NF), and reverse osmosis (RO) ECMs. We propose that these fundamental measurements are critical to assessing the viability of ECMs for industrial MF, UF, NF, and RO applications.•Anodic-oxidation was used to check the electrochemical stability of ECMs•Depth of penetration resulted from scratch test is an indicator of the electrically conductive membrane coating's mechanical stability•The leaching of the main components forming the nanolayer was quantified to assess the membranes' physical stability.