Anion exchange membranes with twisted poly(terphenylene) backbone: Effect of the N-cyclic cations

Base-Promoted Annulated Aromatization of Aryl Acetylenes with Dimethyl Sulfoxide to Access Symmetrical/Unsymmetric m-Terphenyl

A protocol for selective and efficient synthesis of symmetrical and unsymmetrical m-terphenyls is presented among aryl acetylene and DMSO in the presence of KOH and methanol. In this reaction, two molecules of aryl acetylene contribute four carbons, and DMSO, as a dual carbon donor, provides two carbons to a new aromatic ring. This protocol can be tolerated for the electron-donating or disubstituted phenylacetylenes as well as the heterocyclic acetylene derivatives.

Tuning polar discrimination between side chains to improve the performance of anion exchange membranes

Anion exchange membranes (AEMs) are the heart of alkaline fuel cells and water electrolysis, and have made a great progress in recent years. However, AEMs are still unable to satisfy the needs of high conductivity and stability, hindering their widespread commercialization. Side chain regulations have been widely used to prepare highly conductive and durable AEMs. Here, we construct a series of polyaromatic AEMs grafted with fluorinated cation side chains and cation-free alkyl chains with different end groups to explore the polar discrimination of side chains on membrane performance. This work demonstrates that AEMs grafting the cation side chains with superhydrophobic fluorine pendent and alkyl side chains with hydrophilic pendent enhance water content and ion conductivity. This is due to the strong immiscibility between the hydrophilic and hydrophobic head groups which promotes the establishments of microphase separation and ion highways. Specifically, poly(binaphthyl-co-terphenyl piperidinium) containing fluorinated piperidinium side chains and alkyl chains with methoxy pendent (QBNTP-QFM) possesses a satisficed OH- conductivity (170.6 mS cm-1 at 80 °C) and can tolerate 5 M hot NaOH for 2100 h with only 3.4 % conductivity loss. Expectedly, the single cell with QBNTP-QFM yields a prominent maximum power density of 1.62 W cm-2 and the water electrolysis cell with QBNTP-QFM achieves a pronounced current density of 3.0 A cm-2 at 1.8 V, both cells also display a prominent durability for 120 h operation. The results prove that this side chain optimization can improve ion conductivity and is a promising method for AEM development.

Separators and Membranes for Advanced Alkaline Water Electrolysis

Traditionally, alkaline water electrolysis (AWE) uses diaphragms to separate anode and cathode and is operated with 5-7 M KOH feed solutions. The ban of asbestos diaphragms led to the development of polymeric diaphragms, which are now the state of the art material. A promising alternative is the ion solvating membrane. Recent developments show that high conductivities can also be obtained in 1 M KOH. A third technology is based on anion exchange membranes (AEM); because these systems use 0-1 M KOH feed solutions to balance the trade-off between conductivity and the AEM's lifetime in alkaline environment, it makes sense to treat them separately as AEM WE. However, the lifetime of AEM increased strongly over the last 10 years, and some electrode-related issues like oxidation of the ionomer binder at the anode can be mitigated by using KOH feed solutions. Therefore, AWE and AEM WE may get more similar in the future, and this review focuses on the developments in polymeric diaphragms, ion solvating membranes, and AEM.

"Fishbone" Design of Amino/N-Spirocyclic Cations toward High-Performance Poly(triphenylene piperidine) Anion-Exchange Membranes for Fuel Cells

N-Spirocyclic cations have excellent alkali resistance stability, and precise design of the structure of N-spirocyclic anion-exchange membranes (AEMs) improves their comprehensive performance. Here, we design and synthesize high-performance poly(triphenylene piperidine) membranes based on the "fishbone" design of amino/N-spirocyclic cations. The "fishbone" design does not disrupt the overall stabilized conformation but promotes a microphase separation structure, while exerting the synergistic effect of piperidine cations and spirocyclic cations, resulting in a membrane with good conductivity and alkali resistance stability. The hydroxide conductivity of the QPTPip-ASU-X membrane reached up to 133.5 mS cm-1 at 80 °C. The QPTPip-ASU-15 membrane was immersed in a 2 M NaOH solution at 80 °C for 1200 h, and the conductivity was maintained at 91.02%. In addition, the QPTPip-ASU-5 membrane had the highest peak power density of 255 mW cm-2.

Dimensionally Stable Anion Exchange Membranes Based on Macromolecular-Cross-Linked Poly(arylene piperidinium) for Water Electrolysis

The advancement of anion exchange membranes (AEMs) with superior ionic conductivity has been greatly hindered due to the inherent "trade-off" between membrane swelling and ionic conductivity. To resolve this dilemma, macromolecular covalently cross-linked C-FPVBC-x AEMs were fabricated by combining partially functionalized ether-bond-free polystyrene (FPVBC) with poly(arylene piperidinium). The results from atomic force microscopy reveal that an increase in the ratio of FPVBC promotes the fabrication of microphase separation morphology, resulting in a high ionic conductivity of 40.15 mS cm-1 (30 °C) for the C-FPVBC-1.7 membrane. Molecular dynamics simulations further examine the ionic conduction effect of cross-linked AEMs. Besides, the unique cross-linking structure significantly improves mechanical and alkaline stability. After treatment in 1 M KOH at 50 °C for 1200 h, the C-FPVBC-1.7 membrane shows only a 6.9% decrease in conductivity. The C-FPVBC-1.7 AEM-based water electrolyzer achieves a high current density of 890 mA cm-2 at 2.4 V (80 °C) and maintains good stability, enduring over 100 h at 100 mA cm-2 (50 °C). These results demonstrate the significant potential of macromolecularly cross-linked AEMs for practical applications in water electrolysis.

Effects of the crown ether cavity on the performance of anion exchange membranes

Anion exchange membrane fuel cells (AEMFCs) have emerged as a promising alternative to proton exchange membrane fuel cells (PEMFCs) due to their adaptability to low-cost stack components and non-noble-metals catalysts. However, the poor alkaline resistance and low OH^- conductivity of anion exchange membranes (AEMs) have impeded the large-scale implementation of AEMFCs. Herein, the preparation of a new type of AEMs with crown ether macrocycles in their main chains via a one-pot superacid catalyzed reaction was reported. The study aimed to examine the influence of crown ether cavity size on the phase separation structure, ionic conductivity and alkali resistance of anion exchange membranes. Attributed to the self-assembly of crown ethers, the poly (crown ether) (PCE) AEMs with dibenzo-18-crown-6-ether (QAPCE-18-6) exhibit an obvious phase separated structure and a maximum OH^- conductivity of 122.5 mS cm^-1 at 80 °C (ionic exchange capacity is 1.51 meq g^-1). QAPCE-18-6 shows a good alkali resistance with the OH^- conductivity retention of 94.5% albeit being treated in a harsh alkali condition. Moreover, the hydrogen/oxygen single cell equipped with QAPCE-18-6 can achieve a peak power density (PPD) of 574 mW cm^-2 at a current density of 1.39 A cm^-2.